blazar.conf¶
DEFAULT¶
-
auth_strategy
¶ - Type
string
- Default
keystone
The strategy to use for auth: noauth or keystone.
-
port
¶ - Type
integer
- Default
1234
- Minimum Value
0
- Maximum Value
65535
Port that will be used to listen on
-
enable_v1_api
¶ - Type
boolean
- Default
True
Deploy the v1 API.
-
host
¶ - Type
host address
- Default
0.0.0.0
Name of this node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. However, the node name must be valid within an AMQP key, and if using ZeroMQ (will be removed in the Stein release), a valid hostname, FQDN, or IP address
-
log_exchange
¶ - Type
boolean
- Default
False
Log request/response exchange details: environ, headers and bodies
-
cleaning_time
¶ - Type
integer
- Default
0
- Minimum Value
0
The minimum interval [minutes] between the end of a lease and the start of the next lease for the same resource. This interval is used for cleanup.
-
os_auth_protocol
¶ - Type
string
- Default
http
Protocol used to access OpenStack Identity service
-
os_auth_host
¶ - Type
host address
- Default
127.0.0.1
IP or hostname of machine on which OpenStack Identity service is located
-
os_auth_port
¶ - Type
string
- Default
5000
Port of OpenStack Identity service.
-
os_auth_prefix
¶ - Type
string
- Default
''
Prefix of URL to access OpenStack Identity service.
-
os_admin_username
¶ - Type
string
- Default
admin
This OpenStack user is used to treat trusts. The user must have admin role in <os_admin_project_name> project.
-
os_admin_password
¶ - Type
string
- Default
blazar
Password of the admin user to treat trusts.
-
os_admin_project_name
¶ - Type
string
- Default
admin
Name of project where the user is admin.
-
os_auth_version
¶ - Type
string
- Default
v3
Blazar uses API v3 to allow trusts using.
-
os_admin_user_domain_name
¶ - Type
string
- Default
Default
A domain name the os_admin_username belongs to.
-
os_admin_project_domain_name
¶ - Type
string
- Default
Default
A domain name the os_admin_project_name belongs to
-
db_driver
¶ - Type
string
- Default
blazar.db
Driver to use for database access
-
command
¶ - Type
unknown type
- Default
<None>
Available commands
-
identity_service
¶ - Type
string
- Default
identity
Identity service to use.
-
os_region_name
¶ - Type
string
- Default
<None>
Region name of this node. This is used when picking the URL in the service catalog.
Possible values:
Any string representing region name
-
keystone_client_version
¶ - Type
string
- Default
3
Keystoneclient version
-
rpc_conn_pool_size
¶ - Type
integer
- Default
30
- Minimum Value
1
Size of RPC connection pool.
¶ Group
Name
DEFAULT
rpc_conn_pool_size
-
conn_pool_min_size
¶ - Type
integer
- Default
2
The pool size limit for connections expiration policy
-
conn_pool_ttl
¶ - Type
integer
- Default
1200
The time-to-live in sec of idle connections in the pool
-
executor_thread_pool_size
¶ - Type
integer
- Default
64
Size of executor thread pool when executor is threading or eventlet.
¶ Group
Name
DEFAULT
rpc_thread_pool_size
-
rpc_response_timeout
¶ - Type
integer
- Default
60
Seconds to wait for a response from a call.
-
transport_url
¶ - Type
string
- Default
rabbit://
The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:
driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
Example: rabbit://rabbitmq:password@127.0.0.1:5672//
For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-
control_exchange
¶ - Type
string
- Default
openstack
The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.
-
rpc_ping_enabled
¶ - Type
boolean
- Default
False
Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping
-
backdoor_port
¶ - Type
string
- Default
<None>
Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.
-
backdoor_socket
¶ - Type
string
- Default
<None>
Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option. Inside the path {pid} will be replaced with the PID of the current process.
-
log_options
¶ - Type
boolean
- Default
True
Enables or disables logging values of all registered options when starting a service (at DEBUG level).
-
graceful_shutdown_timeout
¶ - Type
integer
- Default
60
Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.
-
debug
¶ - Type
boolean
- Default
False
- Mutable
This option can be changed without restarting.
If set to true, the logging level will be set to DEBUG instead of the default INFO level.
-
log_config_append
¶ - Type
string
- Default
<None>
- Mutable
This option can be changed without restarting.
The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).
¶ Group
Name
DEFAULT
log-config
DEFAULT
log_config
-
log_date_format
¶ - Type
string
- Default
%Y-%m-%d %H:%M:%S
Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.
-
log_file
¶ - Type
string
- Default
<None>
(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.
¶ Group
Name
DEFAULT
logfile
-
log_dir
¶ - Type
string
- Default
<None>
(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.
¶ Group
Name
DEFAULT
logdir
-
watch_log_file
¶ - Type
boolean
- Default
False
Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.
-
use_syslog
¶ - Type
boolean
- Default
False
Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.
-
use_journal
¶ - Type
boolean
- Default
False
Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.
-
syslog_log_facility
¶ - Type
string
- Default
LOG_USER
Syslog facility to receive log lines. This option is ignored if log_config_append is set.
-
use_json
¶ - Type
boolean
- Default
False
Use JSON formatting for logging. This option is ignored if log_config_append is set.
-
use_stderr
¶ - Type
boolean
- Default
False
Log output to standard error. This option is ignored if log_config_append is set.
-
use_eventlog
¶ - Type
boolean
- Default
False
Log output to Windows Event Log.
-
log_rotate_interval
¶ - Type
integer
- Default
1
The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is setto “interval”.
-
log_rotate_interval_type
¶ - Type
string
- Default
days
- Valid Values
Seconds, Minutes, Hours, Days, Weekday, Midnight
Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.
-
max_logfile_count
¶ - Type
integer
- Default
30
Maximum number of rotated log files.
-
max_logfile_size_mb
¶ - Type
integer
- Default
200
Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.
-
log_rotation_type
¶ - Type
string
- Default
none
- Valid Values
interval, size, none
Log rotation type.
Possible values
- interval
Rotate logs at predefined time intervals.
- size
Rotate logs once they reach a predefined size.
- none
Do not rotate log files.
-
logging_context_format_string
¶ - Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter
-
logging_default_format_string
¶ - Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter
-
logging_debug_format_suffix
¶ - Type
string
- Default
%(funcName)s %(pathname)s:%(lineno)d
Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter
-
logging_exception_prefix
¶ - Type
string
- Default
%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter
-
logging_user_identity_format
¶ - Type
string
- Default
%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-
default_log_levels
¶ - Type
list
- Default
['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']
List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.
-
publish_errors
¶ - Type
boolean
- Default
False
Enables or disables publication of error events.
-
instance_format
¶ - Type
string
- Default
"[instance: %(uuid)s] "
The format for an instance that is passed with the log message.
-
instance_uuid_format
¶ - Type
string
- Default
"[instance: %(uuid)s] "
The format for an instance UUID that is passed with the log message.
-
rate_limit_interval
¶ - Type
integer
- Default
0
Interval, number of seconds, of log rate limiting.
-
rate_limit_burst
¶ - Type
integer
- Default
0
Maximum number of logged messages per rate_limit_interval.
-
rate_limit_except_level
¶ - Type
string
- Default
CRITICAL
Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.
-
fatal_deprecations
¶ - Type
boolean
- Default
False
Enables or disables fatal status of deprecations.
api¶
-
api_v2_controllers
¶ - Type
list
- Default
['oshosts', 'leases']
API extensions to use
cors¶
-
allowed_origin
¶ - Type
list
- Default
<None>
Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com
-
allow_credentials
¶ - Type
boolean
- Default
True
Indicate that the actual request can include user credentials
-
expose_headers
¶ - Type
list
- Default
[]
Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.
-
max_age
¶ - Type
integer
- Default
3600
Maximum cache age of CORS preflight requests.
-
allow_methods
¶ - Type
list
- Default
['OPTIONS', 'GET', 'HEAD', 'POST', 'PUT', 'DELETE', 'TRACE', 'PATCH']
Indicate which methods can be used during the actual request.
-
allow_headers
¶ - Type
list
- Default
[]
Indicate which header field names may be used during the actual request.
database¶
-
sqlite_synchronous
¶ - Type
boolean
- Default
True
If True, SQLite uses synchronous mode.
¶ Group
Name
DEFAULT
sqlite_synchronous
-
backend
¶ - Type
string
- Default
sqlalchemy
The back end to use for the database.
¶ Group
Name
DEFAULT
db_backend
-
connection
¶ - Type
string
- Default
<None>
The SQLAlchemy connection string to use to connect to the database.
¶ Group
Name
DEFAULT
sql_connection
DATABASE
sql_connection
sql
connection
-
slave_connection
¶ - Type
string
- Default
<None>
The SQLAlchemy connection string to use to connect to the slave database.
-
mysql_sql_mode
¶ - Type
string
- Default
TRADITIONAL
The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=
-
mysql_enable_ndb
¶ - Type
boolean
- Default
False
If True, transparently enables support for handling MySQL Cluster (NDB).
-
connection_recycle_time
¶ - Type
integer
- Default
3600
Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.
¶ Group
Name
DATABASE
idle_timeout
database
idle_timeout
DEFAULT
sql_idle_timeout
DATABASE
sql_idle_timeout
sql
idle_timeout
-
max_pool_size
¶ - Type
integer
- Default
5
Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.
¶ Group
Name
DEFAULT
sql_max_pool_size
DATABASE
sql_max_pool_size
-
max_retries
¶ - Type
integer
- Default
10
Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.
¶ Group
Name
DEFAULT
sql_max_retries
DATABASE
sql_max_retries
-
retry_interval
¶ - Type
integer
- Default
10
Interval between retries of opening a SQL connection.
¶ Group
Name
DEFAULT
sql_retry_interval
DATABASE
reconnect_interval
-
max_overflow
¶ - Type
integer
- Default
50
If set, use this value for max_overflow with SQLAlchemy.
¶ Group
Name
DEFAULT
sql_max_overflow
DATABASE
sqlalchemy_max_overflow
-
connection_debug
¶ - Type
integer
- Default
0
- Minimum Value
0
- Maximum Value
100
Verbosity of SQL debugging information: 0=None, 100=Everything.
¶ Group
Name
DEFAULT
sql_connection_debug
-
connection_trace
¶ - Type
boolean
- Default
False
Add Python stack traces to SQL as comment strings.
¶ Group
Name
DEFAULT
sql_connection_trace
-
pool_timeout
¶ - Type
integer
- Default
<None>
If set, use this value for pool_timeout with SQLAlchemy.
¶ Group
Name
DATABASE
sqlalchemy_pool_timeout
-
use_db_reconnect
¶ - Type
boolean
- Default
False
Enable the experimental use of database reconnect on connection lost.
-
db_retry_interval
¶ - Type
integer
- Default
1
Seconds between retries of a database transaction.
-
db_inc_retry_interval
¶ - Type
boolean
- Default
True
If True, increases the interval between retries of a database operation up to db_max_retry_interval.
-
db_max_retry_interval
¶ - Type
integer
- Default
10
If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.
-
db_max_retries
¶ - Type
integer
- Default
20
Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.
-
connection_parameters
¶ - Type
string
- Default
''
Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1¶m2=value2&…
healthcheck¶
-
path
¶ - Type
string
- Default
/healthcheck
The path to respond to healtcheck requests on.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
-
detailed
¶ - Type
boolean
- Default
False
Show more detailed information as part of the response. Security note: Enabling this option may expose sensitive details about the service being monitored. Be sure to verify that it will not violate your security policies.
-
backends
¶ - Type
list
- Default
[]
Additional backends that can perform health checks and report that information back as part of a request.
-
disable_by_file_path
¶ - Type
string
- Default
<None>
Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin.
-
disable_by_file_paths
¶ - Type
list
- Default
[]
Check the presence of a file based on a port to determine if an application is running on a port. Expects a “port:path” list of strings. Used by DisableByFilesPortsHealthcheck plugin.
keystone_authtoken¶
-
www_authenticate_uri
¶ - Type
string
- Default
<None>
Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.
¶ Group
Name
keystone_authtoken
auth_uri
-
auth_uri
¶ - Type
string
- Default
<None>
Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
Warning
This option is deprecated for removal since Queens. Its value may be silently ignored in the future.
- Reason
The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.
-
auth_version
¶ - Type
string
- Default
<None>
API version of the Identity API endpoint.
-
interface
¶ - Type
string
- Default
internal
Interface to use for the Identity API endpoint. Valid values are “public”, “internal” (default) or “admin”.
-
delay_auth_decision
¶ - Type
boolean
- Default
False
Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.
-
http_connect_timeout
¶ - Type
integer
- Default
<None>
Request timeout value for communicating with Identity API server.
-
http_request_max_retries
¶ - Type
integer
- Default
3
How many times are we trying to reconnect when communicating with Identity API Server.
-
cache
¶ - Type
string
- Default
<None>
Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the
memcached_servers
option instead.
-
certfile
¶ - Type
string
- Default
<None>
Required if identity server requires client certificate
-
keyfile
¶ - Type
string
- Default
<None>
Required if identity server requires client certificate
-
cafile
¶ - Type
string
- Default
<None>
A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.
-
insecure
¶ - Type
boolean
- Default
False
Verify HTTPS connections.
-
region_name
¶ - Type
string
- Default
<None>
The region in which the identity server can be found.
-
memcached_servers
¶ - Type
list
- Default
<None>
Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.
¶ Group
Name
keystone_authtoken
memcache_servers
-
token_cache_time
¶ - Type
integer
- Default
300
In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.
-
memcache_security_strategy
¶ - Type
string
- Default
None
- Valid Values
None, MAC, ENCRYPT
(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.
-
memcache_secret_key
¶ - Type
string
- Default
<None>
(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.
-
memcache_pool_dead_retry
¶ - Type
integer
- Default
300
(Optional) Number of seconds memcached server is considered dead before it is tried again.
-
memcache_pool_maxsize
¶ - Type
integer
- Default
10
(Optional) Maximum total number of open connections to every memcached server.
-
memcache_pool_socket_timeout
¶ - Type
integer
- Default
3
(Optional) Socket timeout in seconds for communicating with a memcached server.
-
memcache_pool_unused_timeout
¶ - Type
integer
- Default
60
(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.
-
memcache_pool_conn_get_timeout
¶ - Type
integer
- Default
10
(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.
-
memcache_use_advanced_pool
¶ - Type
boolean
- Default
False
(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.
-
include_service_catalog
¶ - Type
boolean
- Default
True
(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.
-
enforce_token_bind
¶ - Type
string
- Default
permissive
Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.
-
service_token_roles
¶ - Type
list
- Default
['service']
A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.
-
service_token_roles_required
¶ - Type
boolean
- Default
False
For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.
-
service_type
¶ - Type
string
- Default
<None>
The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.
-
auth_type
¶ - Type
unknown type
- Default
<None>
Authentication type to load
¶ Group
Name
keystone_authtoken
auth_plugin
-
auth_section
¶ - Type
unknown type
- Default
<None>
Config Section from which to load plugin specific options
manager¶
-
rpc_topic
¶ - Type
string
- Default
blazar.manager
The topic Blazar uses for blazar-manager messages.
-
plugins
¶ - Type
list
- Default
['dummy.vm.plugin']
All plugins to use (one for every resource type to support.)
-
minutes_before_end_lease
¶ - Type
integer
- Default
60
- Minimum Value
0
Minutes prior to the end of a lease in which actions like notification and snapshot are taken. If this is set to 0, then these actions are not taken.
-
event_max_retries
¶ - Type
integer
- Default
1
- Minimum Value
0
- Maximum Value
50
Number of times to retry an event action.
notifications¶
-
publisher_id
¶ - Type
string
- Default
blazar.lease
Publisher ID for notifications
nova¶
-
nova_client_version
¶ - Type
string
- Default
2
Novaclient version
¶ Group
Name
DEFAULT
nova_client_version
-
compute_service
¶ - Type
string
- Default
compute
Nova name in keystone
¶ Group
Name
DEFAULT
compute_service
-
image_prefix
¶ - Type
string
- Default
reserved_
Prefix for VM images if you want to create snapshots
¶ Group
Name
DEFAULT
image_prefix
-
aggregate_freepool_name
¶ - Type
string
- Default
freepool
Name of the special aggregate where all hosts are candidate for physical host reservation
¶ Group
Name
physical:host
aggregate_freepool_name
-
project_id_key
¶ - Type
string
- Default
blazar:project
Aggregate metadata value for key matching project_id
¶ Group
Name
physical:host
project_id_key
-
blazar_owner
¶ - Type
string
- Default
blazar:owner
Aggregate metadata key for knowing owner project_id
¶ Group
Name
physical:host
blazar_owner
-
az_aware
¶ - Type
boolean
- Default
True
A flag to store original availability zone
oslo_concurrency¶
-
disable_process_locking
¶ - Type
boolean
- Default
False
Enables or disables inter-process locks.
¶ Group
Name
DEFAULT
disable_process_locking
-
lock_path
¶ - Type
string
- Default
<None>
Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.
¶ Group
Name
DEFAULT
lock_path
oslo_messaging_amqp¶
-
container_name
¶ - Type
string
- Default
<None>
Name for the AMQP container. must be globally unique. Defaults to a generated UUID
¶ Group
Name
amqp1
container_name
-
idle_timeout
¶ - Type
integer
- Default
0
Timeout for inactive connections (in seconds)
¶ Group
Name
amqp1
idle_timeout
-
ssl
¶ - Type
boolean
- Default
False
Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.
-
ssl_ca_file
¶ - Type
string
- Default
''
CA certificate PEM file used to verify the server’s certificate
¶ Group
Name
amqp1
ssl_ca_file
-
ssl_cert_file
¶ - Type
string
- Default
''
Self-identifying certificate PEM file for client authentication
¶ Group
Name
amqp1
ssl_cert_file
-
ssl_key_file
¶ - Type
string
- Default
''
Private key PEM file used to sign ssl_cert_file certificate (optional)
¶ Group
Name
amqp1
ssl_key_file
-
ssl_key_password
¶ - Type
string
- Default
<None>
Password for decrypting ssl_key_file (if encrypted)
¶ Group
Name
amqp1
ssl_key_password
-
ssl_verify_vhost
¶ - Type
boolean
- Default
False
By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.
-
sasl_mechanisms
¶ - Type
string
- Default
''
Space separated list of acceptable SASL mechanisms
¶ Group
Name
amqp1
sasl_mechanisms
-
sasl_config_dir
¶ - Type
string
- Default
''
Path to directory that contains the SASL configuration
¶ Group
Name
amqp1
sasl_config_dir
-
sasl_config_name
¶ - Type
string
- Default
''
Name of configuration file (without .conf suffix)
¶ Group
Name
amqp1
sasl_config_name
-
sasl_default_realm
¶ - Type
string
- Default
''
SASL realm to use if no realm present in username
-
connection_retry_interval
¶ - Type
integer
- Default
1
- Minimum Value
1
Seconds to pause before attempting to re-connect.
-
connection_retry_backoff
¶ - Type
integer
- Default
2
- Minimum Value
0
Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.
-
connection_retry_interval_max
¶ - Type
integer
- Default
30
- Minimum Value
1
Maximum limit for connection_retry_interval + connection_retry_backoff
-
link_retry_delay
¶ - Type
integer
- Default
10
- Minimum Value
1
Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.
-
default_reply_retry
¶ - Type
integer
- Default
0
- Minimum Value
-1
The maximum number of attempts to re-send a reply message which failed due to a recoverable error.
-
default_reply_timeout
¶ - Type
integer
- Default
30
- Minimum Value
5
The deadline for an rpc reply message delivery.
-
default_send_timeout
¶ - Type
integer
- Default
30
- Minimum Value
5
The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.
-
default_notify_timeout
¶ - Type
integer
- Default
30
- Minimum Value
5
The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.
-
default_sender_link_timeout
¶ - Type
integer
- Default
600
- Minimum Value
1
The duration to schedule a purge of idle sender links. Detach link after expiry.
-
addressing_mode
¶ - Type
string
- Default
dynamic
Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing
-
pseudo_vhost
¶ - Type
boolean
- Default
True
Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.
-
server_request_prefix
¶ - Type
string
- Default
exclusive
address prefix used when sending to a specific server
¶ Group
Name
amqp1
server_request_prefix
-
broadcast_prefix
¶ - Type
string
- Default
broadcast
address prefix used when broadcasting to all servers
¶ Group
Name
amqp1
broadcast_prefix
-
group_request_prefix
¶ - Type
string
- Default
unicast
address prefix when sending to any server in group
¶ Group
Name
amqp1
group_request_prefix
-
rpc_address_prefix
¶ - Type
string
- Default
openstack.org/om/rpc
Address prefix for all generated RPC addresses
-
notify_address_prefix
¶ - Type
string
- Default
openstack.org/om/notify
Address prefix for all generated Notification addresses
-
multicast_address
¶ - Type
string
- Default
multicast
Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.
-
unicast_address
¶ - Type
string
- Default
unicast
Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.
-
anycast_address
¶ - Type
string
- Default
anycast
Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.
-
default_notification_exchange
¶ - Type
string
- Default
<None>
Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’
-
default_rpc_exchange
¶ - Type
string
- Default
<None>
Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’
-
reply_link_credit
¶ - Type
integer
- Default
200
- Minimum Value
1
Window size for incoming RPC Reply messages.
-
rpc_server_credit
¶ - Type
integer
- Default
100
- Minimum Value
1
Window size for incoming RPC Request messages
-
notify_server_credit
¶ - Type
integer
- Default
100
- Minimum Value
1
Window size for incoming Notification messages
-
pre_settled
¶ - Type
multi-valued
- Default
rpc-cast
- Default
rpc-reply
Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled
oslo_messaging_kafka¶
-
kafka_max_fetch_bytes
¶ - Type
integer
- Default
1048576
Max fetch bytes of Kafka consumer
-
kafka_consumer_timeout
¶ - Type
floating point
- Default
1.0
Default timeout(s) for Kafka consumers
-
pool_size
¶ - Type
integer
- Default
10
Pool Size for Kafka Consumers
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Driver no longer uses connection pool.
-
conn_pool_min_size
¶ - Type
integer
- Default
2
The pool size limit for connections expiration policy
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Driver no longer uses connection pool.
-
conn_pool_ttl
¶ - Type
integer
- Default
1200
The time-to-live in sec of idle connections in the pool
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Driver no longer uses connection pool.
-
consumer_group
¶ - Type
string
- Default
oslo_messaging_consumer
Group id for Kafka consumer. Consumers in one group will coordinate message consumption
-
producer_batch_timeout
¶ - Type
floating point
- Default
0.0
Upper bound on the delay for KafkaProducer batching in seconds
-
producer_batch_size
¶ - Type
integer
- Default
16384
Size of batch for the producer async send
-
compression_codec
¶ - Type
string
- Default
none
- Valid Values
none, gzip, snappy, lz4, zstd
The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version
-
enable_auto_commit
¶ - Type
boolean
- Default
False
Enable asynchronous consumer commits
-
max_poll_records
¶ - Type
integer
- Default
500
The maximum number of records returned in a poll call
-
security_protocol
¶ - Type
string
- Default
PLAINTEXT
- Valid Values
PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL
Protocol used to communicate with brokers
-
sasl_mechanism
¶ - Type
string
- Default
PLAIN
Mechanism when security protocol is SASL
-
ssl_cafile
¶ - Type
string
- Default
''
CA certificate PEM file used to verify the server certificate
-
ssl_client_cert_file
¶ - Type
string
- Default
''
Client certificate PEM file used for authentication.
-
ssl_client_key_file
¶ - Type
string
- Default
''
Client key PEM file used for authentication.
-
ssl_client_key_password
¶ - Type
string
- Default
''
Client key password file used for authentication.
oslo_messaging_notifications¶
-
driver
¶ - Type
multi-valued
- Default
''
The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop
¶ Group
Name
DEFAULT
notification_driver
-
transport_url
¶ - Type
string
- Default
<None>
A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.
¶ Group
Name
DEFAULT
notification_transport_url
-
topics
¶ - Type
list
- Default
['notifications']
AMQP topic used for OpenStack notifications.
¶ Group
Name
rpc_notifier2
topics
DEFAULT
notification_topics
-
retry
¶ - Type
integer
- Default
-1
The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
oslo_messaging_rabbit¶
-
amqp_durable_queues
¶ - Type
boolean
- Default
False
Use durable queues in AMQP.
-
amqp_auto_delete
¶ - Type
boolean
- Default
False
Auto-delete queues in AMQP.
¶ Group
Name
DEFAULT
amqp_auto_delete
-
ssl_version
¶ - Type
string
- Default
''
SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_version
-
ssl_key_file
¶ - Type
string
- Default
''
SSL key file (valid only if SSL enabled).
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_keyfile
-
ssl_cert_file
¶ - Type
string
- Default
''
SSL cert file (valid only if SSL enabled).
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_certfile
-
ssl_ca_file
¶ - Type
string
- Default
''
SSL certification authority file (valid only if SSL enabled).
¶ Group
Name
oslo_messaging_rabbit
kombu_ssl_ca_certs
-
heartbeat_in_pthread
¶ - Type
boolean
- Default
False
EXPERIMENTAL: Run the health check heartbeat thread through a native python thread. By default if this option isn’t provided the health check heartbeat will inherit the execution model from the parent process. By example if the parent process have monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread.
-
kombu_reconnect_delay
¶ - Type
floating point
- Default
1.0
How long to wait before reconnecting in response to an AMQP consumer cancel notification.
¶ Group
Name
DEFAULT
kombu_reconnect_delay
-
kombu_compression
¶ - Type
string
- Default
<None>
EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.
-
kombu_missing_consumer_retry_timeout
¶ - Type
integer
- Default
60
How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.
¶ Group
Name
oslo_messaging_rabbit
kombu_reconnect_timeout
-
kombu_failover_strategy
¶ - Type
string
- Default
round-robin
- Valid Values
round-robin, shuffle
Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.
-
rabbit_login_method
¶ - Type
string
- Default
AMQPLAIN
- Valid Values
PLAIN, AMQPLAIN, RABBIT-CR-DEMO
The RabbitMQ login method.
¶ Group
Name
DEFAULT
rabbit_login_method
-
rabbit_retry_interval
¶ - Type
integer
- Default
1
How frequently to retry connecting with RabbitMQ.
-
rabbit_retry_backoff
¶ - Type
integer
- Default
2
How long to backoff for between retries when connecting to RabbitMQ.
¶ Group
Name
DEFAULT
rabbit_retry_backoff
-
rabbit_interval_max
¶ - Type
integer
- Default
30
Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-
rabbit_ha_queues
¶ - Type
boolean
- Default
False
Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “
¶ Group
Name
DEFAULT
rabbit_ha_queues
-
rabbit_transient_queues_ttl
¶ - Type
integer
- Default
1800
- Minimum Value
1
Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.
-
rabbit_qos_prefetch_count
¶ - Type
integer
- Default
0
Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.
-
heartbeat_timeout_threshold
¶ - Type
integer
- Default
60
Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).
-
heartbeat_rate
¶ - Type
integer
- Default
2
How often times during the heartbeat_timeout_threshold we check the heartbeat.
-
direct_mandatory_flag
¶ - Type
boolean
- Default
True
(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
- Reason
Mandatory flag no longer deactivable.
-
enable_cancel_on_failover
¶ - Type
boolean
- Default
False
Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down
oslo_middleware¶
-
max_request_body_size
¶ - Type
integer
- Default
114688
The maximum body size for each request, in bytes.
¶ Group
Name
DEFAULT
osapi_max_request_body_size
DEFAULT
max_request_body_size
-
secure_proxy_ssl_header
¶ - Type
string
- Default
X-Forwarded-Proto
The HTTP Header that will be used to determine what the original request protocol scheme was, even if it was hidden by a SSL termination proxy.
Warning
This option is deprecated for removal. Its value may be silently ignored in the future.
-
enable_proxy_headers_parsing
¶ - Type
boolean
- Default
False
Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.
oslo_policy¶
-
enforce_scope
¶ - Type
boolean
- Default
False
This option controls whether or not to enforce scope when evaluating policies. If
True
, the scope of the token used in the request is compared to thescope_types
of the policy being enforced. If the scopes do not match, anInvalidScope
exception will be raised. IfFalse
, a message will be logged informing operators that policies are being invoked with mismatching scope.
-
enforce_new_defaults
¶ - Type
boolean
- Default
False
This option controls whether or not to use old deprecated defaults when evaluating policies. If
True
, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with theenforce_scope
flag so that you can get the benefits of new defaults andscope_type
together
-
policy_file
¶ - Type
string
- Default
policy.json
The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.
¶ Group
Name
DEFAULT
policy_file
-
policy_default_rule
¶ - Type
string
- Default
default
Default rule. Enforced when a requested rule is not found.
¶ Group
Name
DEFAULT
policy_default_rule
-
policy_dirs
¶ - Type
multi-valued
- Default
policy.d
Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.
¶ Group
Name
DEFAULT
policy_dirs
-
remote_content_type
¶ - Type
string
- Default
application/x-www-form-urlencoded
- Valid Values
application/x-www-form-urlencoded, application/json
Content Type to send and receive data for REST based policy check
-
remote_ssl_verify_server_crt
¶ - Type
boolean
- Default
False
server identity verification for REST based policy check
-
remote_ssl_ca_crt_file
¶ - Type
string
- Default
<None>
Absolute path to ca cert file for REST based policy check
-
remote_ssl_client_crt_file
¶ - Type
string
- Default
<None>
Absolute path to client cert for REST based policy check
-
remote_ssl_client_key_file
¶ - Type
string
- Default
<None>
Absolute path client key file REST based policy check
physical:host¶
-
blazar_az_prefix
¶ - Type
string
- Default
blazar_
Prefix for Availability Zones created by Blazar
-
before_end
¶ - Type
string
- Default
''
Actions which we will be taken before the end of the lease
-
enable_notification_monitor
¶ - Type
boolean
- Default
False
Enable notification-based resource monitoring. If it is enabled, the blazar-manager monitors states of compute hosts by subscribing to notifications of Nova.
-
notification_topics
¶ - Type
list
- Default
['notifications', 'versioned_notifications']
Notification topics to subscribe to.
-
enable_polling_monitor
¶ - Type
boolean
- Default
False
Enable polling-based resource monitoring. If it is enabled, the blazar-manager monitors states of compute hosts by polling the Nova API.
-
polling_interval
¶ - Type
integer
- Default
60
- Minimum Value
1
Interval (seconds) of polling for health checking.
-
healing_interval
¶ - Type
integer
- Default
60
- Minimum Value
0
Interval (minutes) of reservation healing. If 0 is specified, the interval is infinite and all the reservations in the future is healed at one time.