Windows SMB volume driver

updated: 2021-10-28 23:18

Windows SMB volume driver¶

Description¶

The Windows SMB volume driver leverages pre-existing SMB shares, used to store volumes as virtual disk images.

The main reasons to use the Windows SMB driver are:

ease of management and use
great integration with other Microsoft technologies (e.g. Hyper-V Failover Cluster)
suitable for a various range of deployment types and sizes

The cinder-volume service as well as the required Python components will be installed directly onto designated Windows nodes (prefferably the ones exposing the shares).

Common deployment scenarios¶

The SMB driver is designed to support a variety of scenarios, such as:

Scale-Out File Servers (SoFS), providing highly available SMB shares.
standalone Windows or Samba shares
any other SMB 3.0 capable device

By using SoFS shares, the virtual disk images are stored on Cluster Shared Volumes (CSV).

A common practice involves depoying CSVs on top of SAN backed LUNs (exposed to all the nodes of the cluster through iSCSI or Fibre Channel). In absence of a SAN, Storage Spaces/Storage Spaces Direct (S2D) may be used for the underlying storage.

Note

S2D is commonly used in hyper-converged deployments.

Features¶

VHD and VHDX are the currently supported image formats and may be consumed by Hyper-V and KVM compute nodes. By default, dynamic (thinly provisioned) images will be used, unless configured otherwise.

The driver accepts one or more shares that will be reported to the Cinder scheduler as storage pools. This can provide means of tiering, allowing specific shares (pools) to be requested through volume types.

cinder type-key $volume_type set pool_name=$pool_name

Frontend QoS specs may be associated with the volume types and enforced on the consumer side (e.g. Hyper-V).

cinder qos-create $rule_name consumer=front-end total_bytes_sec=20971520
cinder qos-associate $rule_name $volume_type_id
cinder create $size --volume-type $volume_type_id

Clustering support¶

Active-Active Cinder clustering is currently experimental and should not be used in production. This implies having multiple Cinder Volume services handling the same share simultaneously.

On the other hand, Active-Pasive clustering can easily be achieved, configuring the Cinder Volume service as clustered using Microsoft Failover Cluster.

By using SoFS, you can provide high availability of the shares used by Cinder. This can be used in conjunction with the Nova Hyper-V cluster driver, which allows clustering virtual machines. This ensures that when a compute node is compromised, the virtual machines are transparently migrated to a healthy node, preserving volume connectivity.

Note

The Windows SMB driver is the only Cinder driver that may be used along with the Nova Hyper-V cluster driver. The reason is that during an unexpected failover, the volumes need to be available on the destination compute node side.

Prerequisites¶

Before setting up the SMB driver, you will need to create and configure one or more SMB shares that will be used for storing virtual disk images.

Note

The driver does not manage share permissions. You will have to make sure that Cinder as well as share consumers (e.g. Nova, Hyper-V) have access.

Note that Hyper-V VMs are run using a built-in user group: NT VIRTUAL MACHINE\Virtual Machines.

The easiest way to provide share access is by using Active Directory accounts. You may grant share access to the users running OpenStack services, as well as the compute nodes (and optionally storage nodes), using per computer account access rules. One of the main advantages is that by doing so, you don’t need to pass share credentials to Cinder (and implicitly volume consumers).

By granting access to a computer account, you’re basically granting access to the LocalSystem account of that node, and thus to the VMs running on that host.

Note

By default, OpenStack services deployed using the MSIs are run as LocalSystem.

Once you’ve granted share access to a specific account, don’t forget to also configure file system level permissions on the directory exported by the share.

Configuring cinder-volume¶

Below is a configuration sample for using the Windows SMB Driver. Append those options to your already existing cinder.conf file, described at Install and configure a storage node.

[DEFAULT]
enabled_backends = winsmb

[winsmb]
volume_backend_name = myWindowsSMBBackend
volume_driver = cinder.volume.drivers.windows.smbfs.WindowsSmbfsDriver
smbfs_mount_point_base = C:\OpenStack\mnt\
smbfs_shares_config = C:\Program Files\Cloudbase Solutions\OpenStack\etc\cinder\smbfs_shares_list

# The following config options are optional
#
# image_volume_cache_enabled = true
# image_volume_cache_max_size_gb = 100
# image_volume_cache_max_count = 10
#
# nas_volume_prov_type = thin
# smbfs_default_volume_format = vhdx
# max_over_subscription_ratio = 1.5
# reserved_percentage = 5
# smbfs_pool_mappings = //addr/share:pool_name,//addr/share2:pool_name2

The smbfs_mount_point_base config option allows you to specify where the shares will be mounted. This directory will contain symlinks pointing to the shares used by Cinder. Each symlink name will be a hash of the actual share path.

Configuring the list of available shares¶

In addition to cinder.conf, you will need to have another config file, providing a list of shares that will be used by Cinder for storing disk images. In the above sample, this file is referenced by the smbfs_shares_config option.

The share list config file must contain one share per line, optionally including mount options. You may also add comments, using a ‘#’ at the beginning of the line.

Bellow is a sample of the share list config file:

# Cinder Volume shares
//sofs-cluster/share
//10.0.0.10/volumes -o username=user,password=mypassword

Keep in mind that Linux hosts can also consume those volumes. For this reason, the mount options resemble the ones used by mount.cifs (in fact, those will actually be passed to mount.cifs by the Nova Linux nodes).

In case of Windows nodes, only the share location, username and password will be used when mounting the shares. The share address must use slashes instead of backslashes (as opposed to what Windows admins may expect) because of the above mentioned reason.

Depending on the configured share access rules, you may skip including share credentials in the config file, as described in the Prerequisites section.

Configuring Nova credentials¶

The SMB volume driver relies on the nova assisted volume snapshots feature when snapshotting in-use volumes, as do other similar drivers using shared filesystems.

By default, the Nova policy requires admin rights for this operation. You may provide Cinder specific credentials to be used when requesting Nova assisted volume snapshots, as shown bellow:

[nova]
region_name=RegionOne
auth_strategy=keystone
auth_type=password
auth_url=http://keystone_host/identity
project_name=service
username=nova
password=password
project_domain_name=Default
user_domain_name=Default

Configuring storage pools¶

Each share is reported to the Cinder scheduler as a storage pool.

By default, the share name will be the name of the pool. If needed, you may provide pool name mappings, specifying a custom pool name for each share, as shown bellow:

smbfs_pool_mappings = //addr/share:pool0

In the above sample, the //addr/share share will be reported as pool0.

updated: 2021-10-28 23:18

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.