Testing

Testing

Unit tests

All unit tests should be run using tox. To run the same unit tests that are executing onto Gerrit which includes py35, py27 and pep8, you can issue the following command:

$ workon watcher
(watcher) $ pip install tox
(watcher) $ cd watcher
(watcher) $ tox

If you want to only run one of the aforementioned, you can then issue one of the following:

$ workon watcher
(watcher) $ tox -e py35
(watcher) $ tox -e py27
(watcher) $ tox -e pep8

You may pass options to the test programs using positional arguments. To run a specific unit test, you can pass extra options to os-testr after putting the -- separator. So using the -r option followed by a regex string, you can run the desired test:

$ workon watcher
(watcher) $ tox -e py27 -- -r watcher.tests.api

When you’re done, deactivate the virtualenv:

$ deactivate

Tempest tests

The following procedure gets you started with Tempest testing but you can also refer to the Tempest documentation for more details.

Tempest installation

To install Tempest you can issue the following commands:

$ git clone https://github.com/openstack/tempest/
$ cd tempest/
$ pip install .

The folder you are into now will be called <TEMPEST_DIR> from now onwards.

Please note that although it is fully working outside a virtual environment, it is recommended to install within a venv.

Watcher Tempest testing setup

You can now install Watcher alongside it in development mode by issuing the following command:

$  pip install -e <WATCHER_SRC_DIR>

Then setup a local working environment (here watcher-cloud) for running Tempest for Watcher which shall contain the configuration for your OpenStack integration platform.

In a virtual environment, you can do so by issuing the following command:

$ cd <TEMPEST_DIR>
$ tempest init watcher-cloud

Otherwise, if you are not using a virtualenv:

$ cd <TEMPEST_DIR>
$ tempest init --config-dir ./etc watcher-cloud

By default the configuration file is empty so before starting, you need to issue the following commands:

$ cd <TEMPEST_DIR>/watcher-cloud/etc
$ cp tempest.conf.sample tempest.conf

At this point you need to edit the watcher-cloud/etc/tempest.conf file as described in the Tempest configuration guide. Shown below is a minimal configuration you need to set within your tempest.conf configuration file which can get you started.

For Keystone V3:

[identity]
uri_v3 = http://<KEYSTONE_PUBLIC_ENDPOINT_IP>:<KEYSTONE_PORT>/v3
auth_version = v3

[auth]
admin_username = <ADMIN_USERNAME>
admin_password = <ADMIN_PASSWORD>
admin_tenant_name = <ADMIN_TENANT_NAME>
admin_domain_name = <ADMIN_DOMAIN_NAME>

[identity-feature-enabled]
api_v2 = false
api_v3 = true

For Keystone V2:

[identity]
uri = http://<KEYSTONE_PUBLIC_ENDPOINT_IP>:<KEYSTONE_PORT>/v2.0
auth_version = v2

[auth]
admin_tenant_name = <ADMIN_TENANT_NAME>
admin_username = <ADMIN_USERNAME>
admin_password = <ADMIN_PASSWORD>

In both cases:

[network]
public_network_id = <PUBLIC_NETWORK_ID>

You now have the minimum configuration for running Watcher Tempest tests on a single node.

Since deploying Watcher with only a single compute node is not very useful, a few more configuration have to be set in your tempest.conf file in order to enable the execution of multi-node scenarios:

[compute]
# To indicate Tempest test that you have provided enough compute nodes
min_compute_nodes = 2

# Image UUID you can get using the "glance image-list" command
image_ref = <IMAGE_UUID>

For more information, please refer to:

Watcher Tempest tests execution

To list all Watcher Tempest cases, you can issue the following commands:

$ cd <TEMPEST_DIR>
$ testr list-tests watcher

To run only these tests in Tempest, you can then issue these commands:

$ ./run_tempest.sh --config watcher-cloud/etc/tempest.conf -N -- watcher

Or alternatively the following commands if you are:

$ cd <TEMPEST_DIR>/watcher-cloud
$ ../run_tempest.sh -N -- watcher

To run a single test case, go to Tempest directory, then run with test case name, e.g.:

$ cd <TEMPEST_DIR>
$ ./run_tempest.sh --config watcher-cloud/etc/tempest.conf -N \
    -- watcher_tempest_plugin.tests.api.admin.test_audit_template.TestCreateDeleteAuditTemplate.test_create_audit_template

Alternatively, you can also run the Watcher Tempest plugin tests using tox. But before you can do so, you need to follow the Tempest explanation on running tox with plugins. Then, run:

$ export TEMPEST_CONFIG_DIR=<TEMPEST_DIR>/watcher-cloud/etc/
$ tox -eall-plugin watcher

And, to run a specific test:

$ export TEMPEST_CONFIG_DIR=<TEMPEST_DIR>/watcher-cloud/etc/
$ tox -eall-plugin watcher_tempest_plugin.tests.api.admin.test_audit_template.TestCreateDeleteAuditTemplate.test_create_audit_template
Creative Commons Attribution 3.0 License

Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.