# Copyright 2012 NEC Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import logging
from django.conf import settings
from django.core.urlresolvers import reverse
from django.utils.translation import ugettext_lazy as _
import netaddr
from horizon import exceptions
from horizon import forms
from horizon import messages
from horizon import workflows
from openstack_dashboard import api
from openstack_dashboard.dashboards.project.networks.subnets import utils
from openstack_dashboard import policy
LOG = logging.getLogger(__name__)
[docs]class CreateNetworkInfoAction(workflows.Action):
net_name = forms.CharField(max_length=255,
label=_("Network Name"),
required=False)
if api.neutron.is_port_profiles_supported():
widget = None
else:
widget = forms.HiddenInput()
net_profile_id = forms.ChoiceField(label=_("Network Profile"),
required=False,
widget=widget)
admin_state = forms.ChoiceField(choices=[(True, _('UP')),
(False, _('DOWN'))],
label=_("Admin State"),
required=False,
help_text=_("The state to start"
" the network in."))
shared = forms.BooleanField(label=_("Shared"), initial=False,
required=False)
with_subnet = forms.BooleanField(label=_("Create Subnet"),
widget=forms.CheckboxInput(attrs={
'class': 'switchable',
'data-slug': 'with_subnet',
'data-hide-tab': 'create_network__'
'createsubnetinfo'
'action,'
'create_network__'
'createsubnetdetail'
'action',
'data-hide-on-checked': 'false'
}),
initial=True,
required=False)
def __init__(self, request, *args, **kwargs):
super(CreateNetworkInfoAction, self).__init__(request,
*args, **kwargs)
if api.neutron.is_port_profiles_supported():
self.fields['net_profile_id'].choices = (
self.get_network_profile_choices(request))
if not policy.check((("network", "create_network:shared"),), request):
self.fields['shared'].widget = forms.CheckboxInput(
attrs={'disabled': True})
self.fields['shared'].help_text = _(
'Non admin users are not allowed to set shared option.')
[docs] def get_network_profile_choices(self, request):
profile_choices = [('', _("Select a profile"))]
for profile in self._get_profiles(request, 'network'):
profile_choices.append((profile.id, profile.name))
return profile_choices
def _get_profiles(self, request, type_p):
profiles = []
try:
profiles = api.neutron.profile_list(request, type_p)
except Exception:
msg = _('Network Profiles could not be retrieved.')
exceptions.handle(request, msg)
return profiles
# TODO(absubram): Add ability to view network profile information
# in the network detail if a profile is used.
class Meta(object):
name = _("Network")
help_text = _('Create a new network. '
'In addition, a subnet associated with the network '
'can be created in the following steps of this wizard.')
[docs]class CreateNetworkInfo(workflows.Step):
action_class = CreateNetworkInfoAction
contributes = ("net_name", "admin_state", "net_profile_id", "with_subnet",
"shared")
[docs]class CreateSubnetInfoAction(workflows.Action):
subnet_name = forms.CharField(max_length=255,
widget=forms.TextInput(attrs={
}),
label=_("Subnet Name"),
required=False)
address_source = forms.ChoiceField(
required=False,
label=_('Network Address Source'),
choices=[('manual', _('Enter Network Address manually')),
('subnetpool', _('Allocate Network Address from a pool'))],
widget=forms.Select(attrs={
'class': 'switchable',
'data-slug': 'source',
}))
subnetpool = forms.ChoiceField(
label=_("Address pool"),
widget=forms.SelectWidget(attrs={
'class': 'switched switchable',
'data-slug': 'subnetpool',
'data-switch-on': 'source',
'data-source-subnetpool': _('Address pool')},
data_attrs=('name', 'prefixes',
'ip_version',
'min_prefixlen',
'max_prefixlen',
'default_prefixlen'),
transform=lambda x: "%s (%s)" % (x.name, ", ".join(x.prefixes))
if 'prefixes' in x else "%s" % (x.name)),
required=False)
prefixlen = forms.ChoiceField(widget=forms.Select(attrs={
'class': 'switched',
'data-switch-on': 'subnetpool',
}),
label=_('Network Mask'),
required=False)
cidr = forms.IPField(label=_("Network Address"),
required=False,
initial="",
widget=forms.TextInput(attrs={
'class': 'switched',
'data-switch-on': 'source',
'data-source-manual': _("Network Address"),
}),
help_text=_("Network address in CIDR format "
"(e.g. 192.168.0.0/24, 2001:DB8::/48)"),
version=forms.IPv4 | forms.IPv6,
mask=True)
ip_version = forms.ChoiceField(choices=[(4, 'IPv4'), (6, 'IPv6')],
widget=forms.Select(attrs={
'class': 'switchable',
'data-slug': 'ipversion',
}),
label=_("IP Version"),
required=False)
gateway_ip = forms.IPField(
label=_("Gateway IP"),
widget=forms.TextInput(attrs={
'class': 'switched',
'data-switch-on': 'gateway_ip',
'data-source-manual': _("Gateway IP")
}),
required=False,
initial="",
help_text=_("IP address of Gateway (e.g. 192.168.0.254) "
"The default value is the first IP of the "
"network address "
"(e.g. 192.168.0.1 for 192.168.0.0/24, "
"2001:DB8::1 for 2001:DB8::/48). "
"If you use the default, leave blank. "
"If you do not want to use a gateway, "
"check 'Disable Gateway' below."),
version=forms.IPv4 | forms.IPv6,
mask=False)
no_gateway = forms.BooleanField(label=_("Disable Gateway"),
widget=forms.CheckboxInput(attrs={
'class': 'switchable',
'data-slug': 'gateway_ip',
'data-hide-on-checked': 'true'
}),
initial=False,
required=False)
class Meta(object):
name = _("Subnet")
help_text = _('Creates a subnet associated with the network.'
' You need to enter a valid "Network Address"'
' and "Gateway IP". If you did not enter the'
' "Gateway IP", the first value of a network'
' will be assigned by default. If you do not want'
' gateway please check the "Disable Gateway" checkbox.'
' Advanced configuration is available by clicking on'
' the "Subnet Details" tab.')
def __init__(self, request, context, *args, **kwargs):
super(CreateSubnetInfoAction, self).__init__(request, context, *args,
**kwargs)
if 'with_subnet' in context:
self.fields['with_subnet'] = forms.BooleanField(
initial=context['with_subnet'],
required=False,
widget=forms.HiddenInput()
)
if not getattr(settings, 'OPENSTACK_NEUTRON_NETWORK',
{}).get('enable_ipv6', True):
self.fields['ip_version'].widget = forms.HiddenInput()
self.fields['ip_version'].initial = 4
try:
if api.neutron.is_extension_supported(request,
'subnet_allocation'):
self.fields['subnetpool'].choices = \
self.get_subnetpool_choices(request)
else:
self.hide_subnetpool_choices()
except Exception:
self.hide_subnetpool_choices()
msg = _('Unable to initialize subnetpools')
exceptions.handle(request, msg)
if len(self.fields['subnetpool'].choices) > 1:
# Pre-populate prefixlen choices to satisfy Django
# ChoiceField Validation. This is overridden w/data from
# subnetpool on select.
self.fields['prefixlen'].choices = \
zip(list(range(0, 128 + 1)),
list(range(0, 128 + 1)))
# Populate data-fields for switching the prefixlen field
# when user selects a subnetpool other than
# "Provider default pool"
for (id, name) in self.fields['subnetpool'].choices:
if not len(id):
continue
key = 'data-subnetpool-' + id
self.fields['prefixlen'].widget.attrs[key] = \
_('Network Mask')
else:
self.hide_subnetpool_choices()
[docs] def get_subnetpool_choices(self, request):
subnetpool_choices = [('', _('Select a pool'))]
default_ipv6_subnet_pool_label = \
getattr(settings, 'OPENSTACK_NEUTRON_NETWORK', {}).get(
'default_ipv6_subnet_pool_label', None)
default_ipv4_subnet_pool_label = \
getattr(settings, 'OPENSTACK_NEUTRON_NETWORK', {}).get(
'default_ipv4_subnet_pool_label', None)
if default_ipv6_subnet_pool_label:
subnetpool_dict = {'ip_version': 6,
'name': default_ipv6_subnet_pool_label}
subnetpool = api.neutron.SubnetPool(subnetpool_dict)
subnetpool_choices.append(('', subnetpool))
if default_ipv4_subnet_pool_label:
subnetpool_dict = {'ip_version': 4,
'name': default_ipv4_subnet_pool_label}
subnetpool = api.neutron.SubnetPool(subnetpool_dict)
subnetpool_choices.append(('', subnetpool))
for subnetpool in api.neutron.subnetpool_list(request):
subnetpool_choices.append((subnetpool.id, subnetpool))
return subnetpool_choices
[docs] def hide_subnetpool_choices(self):
self.fields['address_source'].widget = forms.HiddenInput()
self.fields['subnetpool'].choices = []
self.fields['subnetpool'].widget = forms.HiddenInput()
self.fields['prefixlen'].widget = forms.HiddenInput()
def _check_subnet_data(self, cleaned_data, is_create=True):
cidr = cleaned_data.get('cidr')
ip_version = int(cleaned_data.get('ip_version'))
gateway_ip = cleaned_data.get('gateway_ip')
no_gateway = cleaned_data.get('no_gateway')
address_source = cleaned_data.get('address_source')
# When creating network from a pool it is allowed to supply empty
# subnetpool_id signaling that Neutron should choose the default
# pool configured by the operator. This is also part of the IPv6
# Prefix Delegation Workflow.
if not cidr and address_source != 'subnetpool':
msg = _('Specify "Network Address" or '
'clear "Create Subnet" checkbox in previous step.')
raise forms.ValidationError(msg)
if cidr:
subnet = netaddr.IPNetwork(cidr)
if subnet.version != ip_version:
msg = _('Network Address and IP version are inconsistent.')
raise forms.ValidationError(msg)
if (ip_version == 4 and subnet.prefixlen == 32) or \
(ip_version == 6 and subnet.prefixlen == 128):
msg = _("The subnet in the Network Address is "
"too small (/%s).") % subnet.prefixlen
self._errors['cidr'] = self.error_class([msg])
if not no_gateway and gateway_ip:
if netaddr.IPAddress(gateway_ip).version is not ip_version:
msg = _('Gateway IP and IP version are inconsistent.')
raise forms.ValidationError(msg)
if not is_create and not no_gateway and not gateway_ip:
msg = _('Specify IP address of gateway or '
'check "Disable Gateway" checkbox.')
raise forms.ValidationError(msg)
[docs] def clean(self):
cleaned_data = super(CreateSubnetInfoAction, self).clean()
with_subnet = cleaned_data.get('with_subnet')
if not with_subnet:
return cleaned_data
self._check_subnet_data(cleaned_data)
return cleaned_data
[docs]class CreateSubnetInfo(workflows.Step):
action_class = CreateSubnetInfoAction
contributes = ("subnet_name", "cidr", "ip_version",
"gateway_ip", "no_gateway", "subnetpool",
"prefixlen", "address_source")
[docs]class CreateSubnetDetailAction(workflows.Action):
enable_dhcp = forms.BooleanField(label=_("Enable DHCP"),
initial=True, required=False)
ipv6_modes = forms.ChoiceField(
label=_("IPv6 Address Configuration Mode"),
widget=forms.Select(attrs={
'class': 'switched',
'data-switch-on': 'ipversion',
'data-ipversion-6': _("IPv6 Address Configuration Mode"),
}),
initial=utils.IPV6_DEFAULT_MODE,
required=False,
help_text=_("Specifies how IPv6 addresses and additional information "
"are configured. We can specify SLAAC/DHCPv6 stateful/"
"DHCPv6 stateless provided by OpenStack, "
"or specify no option. "
"'No options specified' means addresses are configured "
"manually or configured by a non-OpenStack system."))
allocation_pools = forms.CharField(
widget=forms.Textarea(attrs={'rows': 4}),
label=_("Allocation Pools"),
help_text=_("IP address allocation pools. Each entry is: "
"start_ip_address,end_ip_address "
"(e.g., 192.168.1.100,192.168.1.120) "
"and one entry per line."),
required=False)
dns_nameservers = forms.CharField(
widget=forms.widgets.Textarea(attrs={'rows': 4}),
label=_("DNS Name Servers"),
help_text=_("IP address list of DNS name servers for this subnet. "
"One entry per line."),
required=False)
host_routes = forms.CharField(
widget=forms.widgets.Textarea(attrs={'rows': 4}),
label=_("Host Routes"),
help_text=_("Additional routes announced to the hosts. "
"Each entry is: destination_cidr,nexthop "
"(e.g., 192.168.200.0/24,10.56.1.254) "
"and one entry per line."),
required=False)
class Meta(object):
name = _("Subnet Details")
help_text = _('Specify additional attributes for the subnet.')
def __init__(self, request, context, *args, **kwargs):
super(CreateSubnetDetailAction, self).__init__(request, context,
*args, **kwargs)
if not getattr(settings, 'OPENSTACK_NEUTRON_NETWORK',
{}).get('enable_ipv6', True):
self.fields['ipv6_modes'].widget = forms.HiddenInput()
[docs] def populate_ipv6_modes_choices(self, request, context):
return [(value, _("%s (Default)") % label)
if value == utils.IPV6_DEFAULT_MODE
else (value, label)
for value, label in utils.IPV6_MODE_CHOICES]
def _convert_ip_address(self, ip, field_name):
try:
return netaddr.IPAddress(ip)
except (netaddr.AddrFormatError, ValueError):
msg = (_('%(field_name)s: Invalid IP address (value=%(ip)s)')
% {'field_name': field_name, 'ip': ip})
raise forms.ValidationError(msg)
def _convert_ip_network(self, network, field_name):
try:
return netaddr.IPNetwork(network)
except (netaddr.AddrFormatError, ValueError):
msg = (_('%(field_name)s: Invalid IP address (value=%(network)s)')
% {'field_name': field_name, 'network': network})
raise forms.ValidationError(msg)
def _check_allocation_pools(self, allocation_pools):
for p in allocation_pools.split('\n'):
p = p.strip()
if not p:
continue
pool = p.split(',')
if len(pool) != 2:
msg = _('Start and end addresses must be specified '
'(value=%s)') % p
raise forms.ValidationError(msg)
start, end = [self._convert_ip_address(ip, "allocation_pools")
for ip in pool]
if start > end:
msg = _('Start address is larger than end address '
'(value=%s)') % p
raise forms.ValidationError(msg)
def _check_dns_nameservers(self, dns_nameservers):
for ns in dns_nameservers.split('\n'):
ns = ns.strip()
if not ns:
continue
self._convert_ip_address(ns, "dns_nameservers")
def _check_host_routes(self, host_routes):
for r in host_routes.split('\n'):
r = r.strip()
if not r:
continue
route = r.split(',')
if len(route) != 2:
msg = _('Host Routes format error: '
'Destination CIDR and nexthop must be specified '
'(value=%s)') % r
raise forms.ValidationError(msg)
self._convert_ip_network(route[0], "host_routes")
self._convert_ip_address(route[1], "host_routes")
[docs] def clean(self):
cleaned_data = super(CreateSubnetDetailAction, self).clean()
self._check_allocation_pools(cleaned_data.get('allocation_pools'))
self._check_host_routes(cleaned_data.get('host_routes'))
self._check_dns_nameservers(cleaned_data.get('dns_nameservers'))
return cleaned_data
[docs]class CreateSubnetDetail(workflows.Step):
action_class = CreateSubnetDetailAction
contributes = ("enable_dhcp", "ipv6_modes", "allocation_pools",
"dns_nameservers", "host_routes")
[docs]class CreateNetwork(workflows.Workflow):
slug = "create_network"
name = _("Create Network")
finalize_button_name = _("Create")
success_message = _('Created network "%s".')
failure_message = _('Unable to create network "%s".')
default_steps = (CreateNetworkInfo,
CreateSubnetInfo,
CreateSubnetDetail)
wizard = True
[docs] def get_success_url(self):
return reverse("horizon:project:networks:index")
[docs] def get_failure_url(self):
return reverse("horizon:project:networks:index")
def _create_network(self, request, data):
try:
params = {'name': data['net_name'],
'admin_state_up': (data['admin_state'] == 'True'),
'shared': data['shared']}
if api.neutron.is_port_profiles_supported():
params['net_profile_id'] = data['net_profile_id']
network = api.neutron.network_create(request, **params)
self.context['net_id'] = network.id
msg = (_('Network "%s" was successfully created.') %
network.name_or_id)
LOG.debug(msg)
return network
except Exception as e:
msg = (_('Failed to create network "%(network)s": %(reason)s') %
{"network": data['net_name'], "reason": e})
LOG.info(msg)
redirect = self.get_failure_url()
exceptions.handle(request, msg, redirect=redirect)
return False
def _setup_subnet_parameters(self, params, data, is_create=True):
"""Setup subnet parameters
This methods setups subnet parameters which are available
in both create and update.
"""
is_update = not is_create
params['enable_dhcp'] = data['enable_dhcp']
if int(data['ip_version']) == 6:
ipv6_modes = utils.get_ipv6_modes_attrs_from_menu(
data['ipv6_modes'])
if ipv6_modes[0] and is_create:
params['ipv6_ra_mode'] = ipv6_modes[0]
if ipv6_modes[1] and is_create:
params['ipv6_address_mode'] = ipv6_modes[1]
if data['allocation_pools']:
pools = [dict(zip(['start', 'end'], pool.strip().split(',')))
for pool in data['allocation_pools'].split('\n')
if pool.strip()]
params['allocation_pools'] = pools
if data['host_routes'] or is_update:
routes = [dict(zip(['destination', 'nexthop'],
route.strip().split(',')))
for route in data['host_routes'].split('\n')
if route.strip()]
params['host_routes'] = routes
if data['dns_nameservers'] or is_update:
nameservers = [ns.strip()
for ns in data['dns_nameservers'].split('\n')
if ns.strip()]
params['dns_nameservers'] = nameservers
def _create_subnet(self, request, data, network=None, tenant_id=None,
no_redirect=False):
if network:
network_id = network.id
network_name = network.name
else:
network_id = self.context.get('network_id')
network_name = self.context.get('network_name')
try:
params = {'network_id': network_id,
'name': data['subnet_name']}
if 'cidr' in data and data['cidr']:
params['cidr'] = data['cidr']
if 'ip_version' in data and data['ip_version']:
params['ip_version'] = int(data['ip_version'])
if tenant_id:
params['tenant_id'] = tenant_id
if data['no_gateway']:
params['gateway_ip'] = None
elif data['gateway_ip']:
params['gateway_ip'] = data['gateway_ip']
if 'subnetpool' in data and len(data['subnetpool']):
params['subnetpool_id'] = data['subnetpool']
if 'prefixlen' in data and len(data['prefixlen']):
params['prefixlen'] = data['prefixlen']
self._setup_subnet_parameters(params, data)
subnet = api.neutron.subnet_create(request, **params)
self.context['subnet_id'] = subnet.id
msg = _('Subnet "%s" was successfully created.') % data['cidr']
LOG.debug(msg)
return subnet
except Exception as e:
msg = _('Failed to create subnet "%(sub)s" for network "%(net)s": '
' %(reason)s')
if no_redirect:
redirect = None
else:
redirect = self.get_failure_url()
exceptions.handle(request,
msg % {"sub": data['cidr'], "net": network_name,
"reason": e},
redirect=redirect)
return False
def _delete_network(self, request, network):
"""Delete the created network when subnet creation failed."""
try:
api.neutron.network_delete(request, network.id)
msg = _('Delete the created network "%s" '
'due to subnet creation failure.') % network.name
LOG.debug(msg)
redirect = self.get_failure_url()
messages.info(request, msg)
raise exceptions.Http302(redirect)
except Exception:
msg = _('Failed to delete network "%s"') % network.name
LOG.info(msg)
redirect = self.get_failure_url()
exceptions.handle(request, msg, redirect=redirect)
[docs] def handle(self, request, data):
network = self._create_network(request, data)
if not network:
return False
# If we do not need to create a subnet, return here.
if not data['with_subnet']:
return True
subnet = self._create_subnet(request, data, network, no_redirect=True)
if subnet:
return True
else:
self._delete_network(request, network)
return False