# Copyright 2014 Red Hat, Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import gzip
import logging
import math
import os
import re
import shlex
import shutil
import stat
import tempfile
import time
from oslo_concurrency import processutils
from oslo_config import cfg
from oslo_serialization import base64
from oslo_utils import excutils
from oslo_utils import imageutils
from oslo_utils import units
import requests
import six
from ironic_lib.common.i18n import _
from ironic_lib import disk_partitioner
from ironic_lib import exception
from ironic_lib import utils
opts = [
cfg.IntOpt('efi_system_partition_size',
default=200,
help='Size of EFI system partition in MiB when configuring '
'UEFI systems for local boot.'),
cfg.IntOpt('bios_boot_partition_size',
default=1,
help='Size of BIOS Boot partition in MiB when configuring '
'GPT partitioned systems for local boot in BIOS.'),
cfg.StrOpt('dd_block_size',
default='1M',
help='Block size to use when writing to the nodes disk.'),
cfg.IntOpt('iscsi_verify_attempts',
default=3,
help='Maximum attempts to verify an iSCSI connection is '
'active, sleeping 1 second between attempts.'),
]
CONF = cfg.CONF
CONF.register_opts(opts, group='disk_utils')
LOG = logging.getLogger(__name__)
_PARTED_PRINT_RE = re.compile(r"^(\d+):([\d\.]+)MiB:"
"([\d\.]+)MiB:([\d\.]+)MiB:(\w*)::(\w*)")
CONFIGDRIVE_LABEL = "config-2"
MAX_CONFIG_DRIVE_SIZE_MB = 64
# Maximum disk size supported by MBR is 2TB (2 * 1024 * 1024 MB)
MAX_DISK_SIZE_MB_SUPPORTED_BY_MBR = 2097152
# Limit the memory address space to 1 GiB when running qemu-img
QEMU_IMG_LIMITS = processutils.ProcessLimits(address_space=1 * units.Gi)
[docs]def list_partitions(device):
"""Get partitions information from given device.
:param device: The device path.
:returns: list of dictionaries (one per partition) with keys:
number, start, end, size (in MiB), filesystem, flags
"""
output = utils.execute(
'parted', '-s', '-m', device, 'unit', 'MiB', 'print',
use_standard_locale=True, run_as_root=True)[0]
if isinstance(output, bytes):
output = output.decode("utf-8")
lines = [line for line in output.split('\n') if line.strip()][2:]
# Example of line: 1:1.00MiB:501MiB:500MiB:ext4::boot
fields = ('number', 'start', 'end', 'size', 'filesystem', 'flags')
result = []
for line in lines:
match = _PARTED_PRINT_RE.match(line)
if match is None:
LOG.warning("Partition information from parted for device "
"%(device)s does not match "
"expected format: %(line)s",
dict(device=device, line=line))
continue
# Cast int fields to ints (some are floats and we round them down)
groups = [int(float(x)) if i < 4 else x
for i, x in enumerate(match.groups())]
result.append(dict(zip(fields, groups)))
return result
[docs]def count_mbr_partitions(device):
"""Count the number of primary and logical partitions on a MBR
:param device: The device path.
:returns: A tuple with the number of primary partitions and logical
partitions.
:raise: ValueError if the device does not have a valid MBR partition
table.
"""
# -d do not update the kernel table
# -s print a summary of the partition table
output, err = utils.execute('partprobe', '-d', '-s', device,
run_as_root=True, use_standard_locale=True)
if 'msdos' not in output:
raise ValueError('The device %s does not have a valid MBR '
'partition table' % device)
# Sample output: /dev/vdb: msdos partitions 1 2 3 <5 6 7>
# The partitions with number > 4 (and inside <>) are logical partitions
output = output.replace('<', '').replace('>', '')
partitions = [int(s) for s in output.split() if s.isdigit()]
return(sum(i < 5 for i in partitions), sum(i > 4 for i in partitions))
[docs]def get_disk_identifier(dev):
"""Get the disk identifier from the disk being exposed by the ramdisk.
This disk identifier is appended to the pxe config which will then be
used by chain.c32 to detect the correct disk to chainload. This is helpful
in deployments to nodes with multiple disks.
http://www.syslinux.org/wiki/index.php/Comboot/chain.c32#mbr:
:param dev: Path for the already populated disk device.
:returns: The Disk Identifier.
"""
disk_identifier = utils.execute('hexdump', '-s', '440', '-n', '4',
'-e', '''\"0x%08x\"''',
dev,
run_as_root=True,
check_exit_code=[0],
attempts=5,
delay_on_retry=True)
return disk_identifier[0]
[docs]def is_iscsi_device(dev, node_uuid):
"""check whether the device path belongs to an iscsi device. """
iscsi_id = "iqn.2008-10.org.openstack:%s" % node_uuid
return iscsi_id in dev
[docs]def make_partitions(dev, root_mb, swap_mb, ephemeral_mb,
configdrive_mb, node_uuid, commit=True,
boot_option="netboot", boot_mode="bios",
disk_label=None):
"""Partition the disk device.
Create partitions for root, swap, ephemeral and configdrive on a
disk device.
:param root_mb: Size of the root partition in mebibytes (MiB).
:param swap_mb: Size of the swap partition in mebibytes (MiB). If 0,
no partition will be created.
:param ephemeral_mb: Size of the ephemeral partition in mebibytes (MiB).
If 0, no partition will be created.
:param configdrive_mb: Size of the configdrive partition in
mebibytes (MiB). If 0, no partition will be created.
:param commit: True/False. Default for this setting is True. If False
partitions will not be written to disk.
:param boot_option: Can be "local" or "netboot". "netboot" by default.
:param boot_mode: Can be "bios" or "uefi". "bios" by default.
:param node_uuid: Node's uuid. Used for logging.
:param disk_label: The disk label to be used when creating the
partition table. Valid values are: "msdos", "gpt" or None; If None
Ironic will figure it out according to the boot_mode parameter.
:returns: A dictionary containing the partition type as Key and partition
path as Value for the partitions created by this method.
"""
LOG.debug("Starting to partition the disk device: %(dev)s "
"for node %(node)s",
{'dev': dev, 'node': node_uuid})
# the actual device names in the baremetal are like /dev/sda, /dev/sdb etc.
# While for the iSCSI device, the naming convention has a format which has
# iqn also embedded in it.
# When this function is called by ironic-conductor, the iSCSI device name
# should be appended by "part%d". While on the baremetal, it should name
# the device partitions as /dev/sda1 and not /dev/sda-part1.
if is_iscsi_device(dev, node_uuid):
part_template = dev + '-part%d'
else:
part_template = dev + '%d'
part_dict = {}
if disk_label is None:
disk_label = 'gpt' if boot_mode == 'uefi' else 'msdos'
dp = disk_partitioner.DiskPartitioner(dev, disk_label=disk_label)
# For uefi localboot, switch partition table to gpt and create the efi
# system partition as the first partition.
if boot_mode == "uefi" and boot_option == "local":
part_num = dp.add_partition(CONF.disk_utils.efi_system_partition_size,
fs_type='fat32',
boot_flag='boot')
part_dict['efi system partition'] = part_template % part_num
if boot_mode == "bios" and boot_option == "local" and disk_label == "gpt":
part_num = dp.add_partition(CONF.disk_utils.bios_boot_partition_size,
boot_flag='bios_grub')
part_dict['BIOS Boot partition'] = part_template % part_num
if ephemeral_mb:
LOG.debug("Add ephemeral partition (%(size)d MB) to device: %(dev)s "
"for node %(node)s",
{'dev': dev, 'size': ephemeral_mb, 'node': node_uuid})
part_num = dp.add_partition(ephemeral_mb)
part_dict['ephemeral'] = part_template % part_num
if swap_mb:
LOG.debug("Add Swap partition (%(size)d MB) to device: %(dev)s "
"for node %(node)s",
{'dev': dev, 'size': swap_mb, 'node': node_uuid})
part_num = dp.add_partition(swap_mb, fs_type='linux-swap')
part_dict['swap'] = part_template % part_num
if configdrive_mb:
LOG.debug("Add config drive partition (%(size)d MB) to device: "
"%(dev)s for node %(node)s",
{'dev': dev, 'size': configdrive_mb, 'node': node_uuid})
part_num = dp.add_partition(configdrive_mb)
part_dict['configdrive'] = part_template % part_num
# NOTE(lucasagomes): Make the root partition the last partition. This
# enables tools like cloud-init's growroot utility to expand the root
# partition until the end of the disk.
LOG.debug("Add root partition (%(size)d MB) to device: %(dev)s "
"for node %(node)s",
{'dev': dev, 'size': root_mb, 'node': node_uuid})
boot_val = None
if (boot_mode == "bios" and boot_option == "local" and
disk_label == "msdos"):
boot_val = 'boot'
part_num = dp.add_partition(root_mb, boot_flag=boot_val)
part_dict['root'] = part_template % part_num
if commit:
# write to the disk
dp.commit()
return part_dict
[docs]def is_block_device(dev):
"""Check whether a device is block or not."""
attempts = CONF.disk_utils.iscsi_verify_attempts
for attempt in range(attempts):
try:
s = os.stat(dev)
except OSError as e:
LOG.debug("Unable to stat device %(dev)s. Attempt %(attempt)d "
"out of %(total)d. Error: %(err)s",
{"dev": dev, "attempt": attempt + 1,
"total": attempts, "err": e})
time.sleep(1)
else:
return stat.S_ISBLK(s.st_mode)
msg = _("Unable to stat device %(dev)s after attempting to verify "
"%(attempts)d times.") % {'dev': dev, 'attempts': attempts}
LOG.error(msg)
raise exception.InstanceDeployFailure(msg)
[docs]def dd(src, dst):
"""Execute dd from src to dst."""
utils.dd(src, dst, 'bs=%s' % CONF.disk_utils.dd_block_size, 'oflag=direct')
[docs]def qemu_img_info(path):
"""Return an object containing the parsed output from qemu-img info."""
if not os.path.exists(path):
return imageutils.QemuImgInfo()
out, err = utils.execute('env', 'LC_ALL=C', 'LANG=C',
'qemu-img', 'info', path,
prlimit=QEMU_IMG_LIMITS)
return imageutils.QemuImgInfo(out)
[docs]def convert_image(source, dest, out_format, run_as_root=False):
"""Convert image to other format."""
cmd = ('qemu-img', 'convert', '-O', out_format, source, dest)
utils.execute(*cmd, run_as_root=run_as_root, prlimit=QEMU_IMG_LIMITS)
[docs]def populate_image(src, dst):
data = qemu_img_info(src)
if data.file_format == 'raw':
dd(src, dst)
else:
convert_image(src, dst, 'raw', True)
[docs]def block_uuid(dev):
"""Get UUID of a block device."""
out, _err = utils.execute('blkid', '-s', 'UUID', '-o', 'value', dev,
run_as_root=True,
check_exit_code=[0])
return out.strip()
[docs]def get_image_mb(image_path, virtual_size=True):
"""Get size of an image in Megabyte."""
mb = 1024 * 1024
if not virtual_size:
image_byte = os.path.getsize(image_path)
else:
data = qemu_img_info(image_path)
image_byte = data.virtual_size
# round up size to MB
image_mb = int((image_byte + mb - 1) / mb)
return image_mb
[docs]def get_dev_block_size(dev):
"""Get the device size in 512 byte sectors."""
block_sz, cmderr = utils.execute('blockdev', '--getsz', dev,
run_as_root=True, check_exit_code=[0])
return int(block_sz)
def _get_configdrive(configdrive, node_uuid, tempdir=None):
"""Get the information about size and location of the configdrive.
:param configdrive: Base64 encoded Gzipped configdrive content or
configdrive HTTP URL.
:param node_uuid: Node's uuid. Used for logging.
:param tempdir: temporary directory for the temporary configdrive file
:raises: InstanceDeployFailure if it can't download or decode the
config drive.
:returns: A tuple with the size in MiB and path to the uncompressed
configdrive file.
"""
# Check if the configdrive option is a HTTP URL or the content directly
is_url = utils.is_http_url(configdrive)
if is_url:
try:
data = requests.get(configdrive).content
except requests.exceptions.RequestException as e:
raise exception.InstanceDeployFailure(
_("Can't download the configdrive content for node %(node)s "
"from '%(url)s'. Reason: %(reason)s") %
{'node': node_uuid, 'url': configdrive, 'reason': e})
else:
data = configdrive
try:
data = six.BytesIO(base64.decode_as_bytes(data))
except TypeError:
error_msg = (_('Config drive for node %s is not base64 encoded '
'or the content is malformed.') % node_uuid)
if is_url:
error_msg += _(' Downloaded from "%s".') % configdrive
raise exception.InstanceDeployFailure(error_msg)
configdrive_file = tempfile.NamedTemporaryFile(delete=False,
prefix='configdrive',
dir=tempdir)
configdrive_mb = 0
with gzip.GzipFile('configdrive', 'rb', fileobj=data) as gunzipped:
try:
shutil.copyfileobj(gunzipped, configdrive_file)
except EnvironmentError as e:
# Delete the created file
utils.unlink_without_raise(configdrive_file.name)
raise exception.InstanceDeployFailure(
_('Encountered error while decompressing and writing '
'config drive for node %(node)s. Error: %(exc)s') %
{'node': node_uuid, 'exc': e})
else:
# Get the file size and convert to MiB
configdrive_file.seek(0, os.SEEK_END)
bytes_ = configdrive_file.tell()
configdrive_mb = int(math.ceil(float(bytes_) / units.Mi))
finally:
configdrive_file.close()
return (configdrive_mb, configdrive_file.name)
[docs]def work_on_disk(dev, root_mb, swap_mb, ephemeral_mb, ephemeral_format,
image_path, node_uuid, preserve_ephemeral=False,
configdrive=None, boot_option="netboot", boot_mode="bios",
tempdir=None, disk_label=None):
"""Create partitions and copy an image to the root partition.
:param dev: Path for the device to work on.
:param root_mb: Size of the root partition in megabytes.
:param swap_mb: Size of the swap partition in megabytes.
:param ephemeral_mb: Size of the ephemeral partition in megabytes. If 0,
no ephemeral partition will be created.
:param ephemeral_format: The type of file system to format the ephemeral
partition.
:param image_path: Path for the instance's disk image.
:param node_uuid: node's uuid. Used for logging.
:param preserve_ephemeral: If True, no filesystem is written to the
ephemeral block device, preserving whatever content it had (if the
partition table has not changed).
:param configdrive: Optional. Base64 encoded Gzipped configdrive content
or configdrive HTTP URL.
:param boot_option: Can be "local" or "netboot". "netboot" by default.
:param boot_mode: Can be "bios" or "uefi". "bios" by default.
:param tempdir: A temporary directory
:param disk_label: The disk label to be used when creating the
partition table. Valid values are: "msdos", "gpt" or None; If None
Ironic will figure it out according to the boot_mode parameter.
:returns: a dictionary containing the following keys:
'root uuid': UUID of root partition
'efi system partition uuid': UUID of the uefi system partition
(if boot mode is uefi).
NOTE: If key exists but value is None, it means partition doesn't
exist.
"""
# the only way for preserve_ephemeral to be set to true is if we are
# rebuilding an instance with --preserve_ephemeral.
commit = not preserve_ephemeral
# now if we are committing the changes to disk clean first.
if commit:
destroy_disk_metadata(dev, node_uuid)
try:
# If requested, get the configdrive file and determine the size
# of the configdrive partition
configdrive_mb = 0
configdrive_file = None
if configdrive:
configdrive_mb, configdrive_file = _get_configdrive(
configdrive, node_uuid, tempdir=tempdir)
part_dict = make_partitions(dev, root_mb, swap_mb, ephemeral_mb,
configdrive_mb, node_uuid,
commit=commit,
boot_option=boot_option,
boot_mode=boot_mode,
disk_label=disk_label)
LOG.info("Successfully completed the disk device"
" %(dev)s partitioning for node %(node)s",
{'dev': dev, "node": node_uuid})
ephemeral_part = part_dict.get('ephemeral')
swap_part = part_dict.get('swap')
configdrive_part = part_dict.get('configdrive')
root_part = part_dict.get('root')
if not is_block_device(root_part):
raise exception.InstanceDeployFailure(
_("Root device '%s' not found") % root_part)
for part in ('swap', 'ephemeral', 'configdrive',
'efi system partition'):
part_device = part_dict.get(part)
LOG.debug("Checking for %(part)s device (%(dev)s) on node "
"%(node)s.", {'part': part, 'dev': part_device,
'node': node_uuid})
if part_device and not is_block_device(part_device):
raise exception.InstanceDeployFailure(
_("'%(partition)s' device '%(part_device)s' not found") %
{'partition': part, 'part_device': part_device})
# If it's a uefi localboot, then we have created the efi system
# partition. Create a fat filesystem on it.
if boot_mode == "uefi" and boot_option == "local":
efi_system_part = part_dict.get('efi system partition')
utils.mkfs(fs='vfat', path=efi_system_part, label='efi-part')
if configdrive_part:
# Copy the configdrive content to the configdrive partition
dd(configdrive_file, configdrive_part)
LOG.info("Configdrive for node %(node)s successfully copied "
"onto partition %(partition)s",
{'node': node_uuid, 'partition': configdrive_part})
finally:
# If the configdrive was requested make sure we delete the file
# after copying the content to the partition
if configdrive_file:
utils.unlink_without_raise(configdrive_file)
populate_image(image_path, root_part)
LOG.info("Image for %(node)s successfully populated",
{'node': node_uuid})
if swap_part:
utils.mkfs(fs='swap', path=swap_part, label='swap1')
LOG.info("Swap partition %(swap)s successfully formatted "
"for node %(node)s",
{'swap': swap_part, 'node': node_uuid})
if ephemeral_part and not preserve_ephemeral:
utils.mkfs(fs=ephemeral_format, path=ephemeral_part,
label="ephemeral0")
LOG.info("Ephemeral partition %(ephemeral)s successfully "
"formatted for node %(node)s",
{'ephemeral': ephemeral_part, 'node': node_uuid})
uuids_to_return = {
'root uuid': root_part,
'efi system partition uuid': part_dict.get('efi system partition')
}
try:
for part, part_dev in uuids_to_return.items():
if part_dev:
uuids_to_return[part] = block_uuid(part_dev)
except processutils.ProcessExecutionError:
with excutils.save_and_reraise_exception():
LOG.error("Failed to detect %s", part)
return uuids_to_return
[docs]def list_opts():
"""Entry point for oslo-config-generator."""
return [('disk_utils', opts)]
def _is_disk_larger_than_max_size(device, node_uuid):
"""Check if total disk size exceeds 2TB msdos limit
:param device: device path.
:param node_uuid: node's uuid. Used for logging.
:raises: InstanceDeployFailure, if any disk partitioning related
commands fail.
:returns: True if total disk size exceeds 2TB. Returns False otherwise.
"""
try:
disksize_bytes = utils.execute('blockdev', '--getsize64', device,
use_standard_locale=True,
run_as_root=True)
except (processutils.UnknownArgumentError,
processutils.ProcessExecutionError, OSError) as e:
msg = (_('Failed to get size of disk %(disk)s for node %(node)s. '
'Error: %(error)s') %
{'disk': device, 'node': node_uuid, 'error': e})
LOG.error(msg)
raise exception.InstanceDeployFailure(msg)
disksize_mb = int(disksize_bytes[0].strip()) // 1024 // 1024
return disksize_mb > MAX_DISK_SIZE_MB_SUPPORTED_BY_MBR
def _get_labelled_partition(device_path, label, node_uuid):
"""Check and return if partition with given label exists
:param device_path: The device path.
:param label: Partition label
:param node_uuid: UUID of the Node. Used for logging.
:raises: InstanceDeployFailure, if any disk partitioning related
commands fail.
:returns: block device file for partition if it exists; otherwise it
returns None.
"""
try:
utils.execute('partprobe', device_path, run_as_root=True)
# lsblk command
output, err = utils.execute('lsblk', '-Po', 'name,label', device_path,
check_exit_code=[0, 1],
use_standard_locale=True, run_as_root=True)
except (processutils.UnknownArgumentError,
processutils.ProcessExecutionError, OSError) as e:
msg = (_('Failed to retrieve partition labels on disk %(disk)s '
'for node %(node)s. Error: %(error)s') %
{'disk': device_path, 'node': node_uuid, 'error': e})
LOG.error(msg)
raise exception.InstanceDeployFailure(msg)
found_part = None
if output:
for device in output.split('\n'):
dev = {key: value for key, value in (v.split('=', 1)
for v in shlex.split(device))}
if not dev:
continue
if dev['LABEL'] == label:
if found_part:
found_2 = '/dev/%(part)s' % {'part': dev['NAME'].strip()}
found = [found_part, found_2]
raise exception.InstanceDeployFailure(
_('More than one partition with label "%(label)s" '
'exists on device %(device)s for node %(node)s: '
'%(found)s.') %
{'label': label, 'device': device_path,
'node': node_uuid, 'found': ' and '.join(found)})
found_part = '/dev/%(part)s' % {'part': dev['NAME'].strip()}
return found_part
def _is_disk_gpt_partitioned(device, node_uuid):
"""Checks if the disk is GPT partitioned
:param device: The device path.
:param node_uuid: UUID of the Node. Used for logging.
:raises: InstanceDeployFailure, if any disk partitioning related
commands fail.
:param node_uuid: UUID of the Node
:returns: Boolean. Returns True if disk is GPT partitioned
"""
try:
stdout, _stderr = utils.execute(
'blkid', '-p', '-o', 'value', '-s', 'PTTYPE', device,
use_standard_locale=True, run_as_root=True)
except (processutils.UnknownArgumentError,
processutils.ProcessExecutionError, OSError) as e:
msg = (_('Failed to retrieve partition table type for disk %(disk)s '
'for node %(node)s. Error: %(error)s') %
{'disk': device, 'node': node_uuid, 'error': e})
LOG.error(msg)
raise exception.InstanceDeployFailure(msg)
return (stdout.lower().strip() == 'gpt')
def _fix_gpt_structs(device, node_uuid):
"""Checks backup GPT data structures and moves them to end of the device
:param device: The device path.
:param node_uuid: UUID of the Node. Used for logging.
:raises: InstanceDeployFailure, if any disk partitioning related
commands fail.
"""
try:
output, err = utils.execute('partprobe', device,
use_standard_locale=True,
run_as_root=True)
search_str = "fix the GPT to use all of the space"
if search_str in err:
utils.execute('sgdisk', '-e', device, run_as_root=True)
except (processutils.UnknownArgumentError,
processutils.ProcessExecutionError, OSError) as e:
msg = (_('Failed to fix GPT data structures on disk %(disk)s '
'for node %(node)s. Error: %(error)s') %
{'disk': device, 'node': node_uuid, 'error': e})
LOG.error(msg)
raise exception.InstanceDeployFailure(msg)
[docs]def create_config_drive_partition(node_uuid, device, configdrive):
"""Create a partition for config drive
Checks if the device is GPT or MBR partitioned and creates config drive
partition accordingly.
:param node_uuid: UUID of the Node.
:param device: The device path.
:param configdrive: Base64 encoded Gzipped configdrive content or
configdrive HTTP URL.
:raises: InstanceDeployFailure if config drive size exceeds maximum limit
or if it fails to create config drive.
"""
confdrive_file = None
try:
config_drive_part = _get_labelled_partition(device,
CONFIGDRIVE_LABEL,
node_uuid)
confdrive_mb, confdrive_file = _get_configdrive(configdrive,
node_uuid)
if confdrive_mb > MAX_CONFIG_DRIVE_SIZE_MB:
raise exception.InstanceDeployFailure(
_('Config drive size exceeds maximum limit of 64MiB. '
'Size of the given config drive is %(size)d MiB for '
'node %(node)s.')
% {'size': confdrive_mb, 'node': node_uuid})
LOG.debug("Adding config drive partition %(size)d MiB to "
"device: %(dev)s for node %(node)s",
{'dev': device, 'size': confdrive_mb, 'node': node_uuid})
if config_drive_part:
LOG.debug("Configdrive for node %(node)s exists at "
"%(part)s",
{'node': node_uuid, 'part': config_drive_part})
else:
cur_parts = set(part['number'] for part in list_partitions(device))
if _is_disk_gpt_partitioned(device, node_uuid):
_fix_gpt_structs(device, node_uuid)
create_option = '0:-%dMB:0' % MAX_CONFIG_DRIVE_SIZE_MB
utils.execute('sgdisk', '-n', create_option, device,
run_as_root=True)
else:
# Check if the disk has 4 partitions. The MBR based disk
# cannot have more than 4 partitions.
# TODO(stendulker): One can use logical partitions to create
# a config drive if there are 3 primary partitions.
# https://bugs.launchpad.net/ironic/+bug/1561283
try:
pp_count, lp_count = count_mbr_partitions(device)
except ValueError as e:
raise exception.InstanceDeployFailure(
_('Failed to check the number of primary partitions '
'present on %(dev)s for node %(node)s. Error: '
'%(error)s') % {'dev': device, 'node': node_uuid,
'error': e})
if pp_count > 3:
raise exception.InstanceDeployFailure(
_('Config drive cannot be created for node %(node)s. '
'Disk (%(dev)s) uses MBR partitioning and already '
'has %(parts)d primary partitions.')
% {'node': node_uuid, 'dev': device,
'parts': pp_count})
# Check if disk size exceeds 2TB msdos limit
startlimit = '-%dMiB' % MAX_CONFIG_DRIVE_SIZE_MB
endlimit = '-0'
if _is_disk_larger_than_max_size(device, node_uuid):
# Need to create a small partition at 2TB limit
LOG.warning("Disk size is larger than 2TB for "
"node %(node)s. Creating config drive "
"at the end of the disk %(disk)s.",
{'node': node_uuid, 'disk': device})
startlimit = (MAX_DISK_SIZE_MB_SUPPORTED_BY_MBR -
MAX_CONFIG_DRIVE_SIZE_MB - 1)
endlimit = MAX_DISK_SIZE_MB_SUPPORTED_BY_MBR - 1
utils.execute('parted', '-a', 'optimal', '-s', '--', device,
'mkpart', 'primary', 'fat32', startlimit,
endlimit, run_as_root=True)
upd_parts = set(part['number'] for part in list_partitions(device))
new_part = set(upd_parts) - set(cur_parts)
if len(new_part) != 1:
raise exception.InstanceDeployFailure(
_('Disk partitioning failed on device %(device)s. '
'Unable to retrieve config drive partition information.')
% {'device': device})
if is_iscsi_device(device, node_uuid):
config_drive_part = '%s-part%s' % (device, new_part.pop())
else:
config_drive_part = '%s%s' % (device, new_part.pop())
LOG.debug('Waiting until udev event queue is empty')
utils.execute('udevadm', 'settle')
# NOTE(vsaienko): check that devise actually exists,
# it is not handled by udevadm when using ISCSI, for more info see:
# https://bugs.launchpad.net/ironic/+bug/1673731
# Do not use 'udevadm settle --exit-if-exist' here
LOG.debug('Waiting for the config drive partition %(part)s '
'on node %(node)s to be ready for writing.',
{'part': config_drive_part, 'node': node_uuid})
utils.execute('test', '-e', config_drive_part,
check_exit_code=[0], attempts=15,
delay_on_retry=True)
dd(confdrive_file, config_drive_part)
LOG.info("Configdrive for node %(node)s successfully "
"copied onto partition %(part)s",
{'node': node_uuid, 'part': config_drive_part})
except (processutils.UnknownArgumentError,
processutils.ProcessExecutionError, OSError) as e:
msg = (_('Failed to create config drive on disk %(disk)s '
'for node %(node)s. Error: %(error)s') %
{'disk': device, 'node': node_uuid, 'error': e})
LOG.error(msg)
raise exception.InstanceDeployFailure(msg)
finally:
# If the configdrive was requested make sure we delete the file
# after copying the content to the partition
if confdrive_file:
utils.unlink_without_raise(confdrive_file)