Hardware Burn-in¶

Overview¶

Workflows to onboard new hardware often include a stress-testing step to provoke early failures and to avoid that these load-triggered issues only occur when the nodes have already moved to production. These burn-in tests typically include CPU, memory, disk, and network. With the Xena release, Ironic supports such tests as part of the cleaning framework.

The burn-in steps rely on standard tools such as stress-ng for CPU and memory, or fio for disk and network. The burn-in cleaning steps are part of the generic hardware manager in the Ironic Python Agent (IPA) and therefore the agent ramdisk does not need to be bundled with a specific IPA hardware manager to have them available.

Each burn-in step accepts (or in the case of network: needs) some basic configuration options, mostly to limit the duration of the test and to specify the amount of resources to be used. The options are set on a node’s driver-info and prefixed with agent_burnin_. The options available for the individual tests will be outlined below.

CPU burn-in¶

The options, following a agent_burnin_ + stress-ng stressor (cpu) + stress-ng option schema, are:

agent_burnin_cpu_timeout (default: 24 hours)
agent_burnin_cpu_cpu (default: 0, meaning all CPUs)

to limit the overall runtime and to pick the number of CPUs to stress.

For instance, in order to limit the time of the CPU burn-in to 10 minutes do:

baremetal node set --driver-info agent_burnin_cpu_timeout=600 \
    $NODE_NAME_OR_UUID

Then launch the test with:

baremetal node clean --clean-steps '[{"step": "burnin_cpu", \
    "interface": "deploy"}]' $NODE_NAME_OR_UUID

Memory burn-in¶

The options, following a agent_burnin_ + stress-ng stressor (vm) + stress-ng option schema, are:

agent_burnin_vm_timeout (default: 24 hours)
agent_burnin_vm_vm-bytes (default: 98%)

to limit the overall runtime and to set the fraction of RAM to stress.

For instance, in order to limit the time of the memory burn-in to 1 hour and the amount of RAM to be used to 75% run:

baremetal node set --driver-info agent_burnin_vm_timeout=3600 \
    $NODE_NAME_OR_UUID
baremetal node set --driver-info agent_burnin_vm_vm-bytes=75% \
    $NODE_NAME_OR_UUID

Then launch the test with:

baremetal node clean --clean-steps '[{"step": "burnin_memory", \
    "interface": "deploy"}]' $NODE_NAME_OR_UUID

Disk burn-in¶

The options, following a agent_burnin_ + fio stressor (fio_disk) + fio option schema, are:

agent_burnin_fio_disk_runtime (default: 0, meaning no time limit)
agent_burnin_fio_disk_loops (default: 4)

to set the time limit and the number of iterations when going over the disks.

For instance, in order to limit the number of loops to 2 set:

baremetal node set --driver-info agent_burnin_fio_disk_loops=2 \
    $NODE_NAME_OR_UUID

Then launch the test with:

baremetal node clean --clean-steps '[{"step": "burnin_disk", \
    "interface": "deploy"}]' $NODE_NAME_OR_UUID

Network burn-in¶

Burning in the network needs a little more config, since we need a pair of nodes to perform the test. This pairing can be done either in a static way, i.e. pairs are defined upfront, or dynamically via a distributed coordination backend which orchestrates the pair matching. While the static approach is more predictable in terms of which nodes test each other, the dynamic approach avoids nodes being blocked in case there are issues with servers and simply pairs all available nodes.

Static network burn-in configuration¶

To define pairs of nodes statically, each node can be assigned a agent_burnin_fio_network_config JSON which requires a role field (values: reader, writer) and a partner field (value is the hostname of the other node to test), like:

baremetal node set --driver-info agent_burnin_fio_network_config= \
    '{"role": "writer", "partner": "$HOST2"}' $NODE_NAME_OR_UUID1
baremetal node set --driver-info agent_burnin_fio_network_config= \
    '{"role": "reader", "partner": "$HOST1"}' $NODE_NAME_OR_UUID2

Dynamic network burn-in configuration¶

In order to use dynamic pair matching, a coordination backend is used via tooz. The corresponding backend URL then needs to be added to the node, e.g. for a Zookeeper backend it would look similar to:

baremetal node set --driver-info \
    agent_burnin_fio_network_pairing_backend_url= \
    'zookeeper://zk1.xyz.com:2181,zk2.xyz.com:2181,zk3.xyz.com:2181' \
    $NODE_NAME_OR_UUID1
baremetal node set --driver-info \
    agent_burnin_fio_network_pairing_backend_url= \
    'zookeeper://zk1.xyz.com:2181,zk2.xyz.com:2181,zk3.xyz.com:2181' \
    $NODE_NAME_OR_UUID2
...
baremetal node set --driver-info \
    agent_burnin_fio_network_pairing_backend_url= \
    'zookeeper://zk1.xyz.com:2181,zk2.xyz.com:2181,zk3.xyz.com:2181' \
    $NODE_NAME_OR_UUIDN

Different deliveries or network ports can be separated by creating different rooms on the backend with:

baremetal node set --driver-info \
agent_burnin_fio_network_pairing_group_name=$DELIVERY $NODE_NAME_OR_UUID

This allows to control which nodes (or interfaces) connect with which other nodes (or interfaces).

Launching network burn-in¶

In addition and similar to the other tests, there is a runtime option to be set (only on the writer):

baremetal node set --driver-info agent_burnin_fio_network_runtime=600 \
    $NODE_NAME_OR_UUID

The actual network burn-in can then be launched with:

baremetal node clean --clean-steps '[{"step": "burnin_network",\
    "interface": "deploy"}]' $NODE_NAME_OR_UUID1
baremetal node clean --clean-steps '[{"step": "burnin_network",\
    "interface": "deploy"}]' $NODE_NAME_OR_UUID2

Both nodes will wait for the other node to show up and block while waiting. If the partner does not show up, the cleaning timeout will step in.

Logging¶

Since most of the burn-in steps are also providing information about the performance of the stressed components, keeping this information for verification or acceptance purposes may be desirable. By default, the output of the burn-in tools goes to the journal of the Ironic Python Agent and is therefore sent back as an archive to the conductor. In order to consume the output of the burn-in steps more easily, or even in real-time, the nodes can be configured to store the output of the individual steps to files in the ramdisk (from where they can be picked up by a logging pipeline).

The configuration of the outpout file is done via one of agent_burnin_cpu_outputfile, agent_burnin_vm_outputfile, agent_burnin_fio_disk_outputfile, and agent_burnin_fio_network_outputfile parameters which need to be added to a node like:

baremetal node set --driver-info agent_burnin_cpu_outputfile=\
    '/var/log/burnin.cpu' $NODE_NAME_OR_UUID

Additional Information¶

All tests can be aborted at any moment with

baremetal node abort $NODE_NAME_OR_UUID

One can also launch multiple tests which will be run in sequence, e.g.:

baremetal node clean --clean-steps '[{"step": "burnin_cpu",\
   "interface": "deploy"}, {"step": "burnin_memory",\
   "interface": "deploy"}]' $NODE_NAME_OR_UUID

If desired, configuring fast-track may be helpful here as it allows to keep the node up between consecutive calls of baremetal node clean.

Hardware Burn-in

Hardware Burn-in¶

Overview¶

CPU burn-in¶

Memory burn-in¶

Disk burn-in¶

Network burn-in¶

Static network burn-in configuration¶

Dynamic network burn-in configuration¶

Launching network burn-in¶

Logging¶

Additional Information¶

ironic 21.0.1.dev22

Page Contents