# Copyright 2016 Intel Corporation
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import os
from oslo_config import cfg
from ironic.common.i18n import _
from ironic.conf import auth
VALID_ADD_PORTS_VALUES = {
'all': _('all MAC addresses'),
'active': _('MAC addresses of NICs with IP addresses'),
'pxe': _('only the MAC address of the PXE NIC'),
'disabled': _('do not create any ports'),
}
VALID_KEEP_PORTS_VALUES = {
'all': _('keep all ports, even ones with MAC addresses that are not '
'present in the inventory'),
'present': _('keep only ports with MAC addresses present in '
'the inventory'),
'added': _('keep only ports determined by the add_ports option'),
}
DEFAULT_CPU_FLAGS_MAPPING = {
'vmx': 'cpu_vt',
'svm': 'cpu_vt',
'aes': 'cpu_aes',
'pse': 'cpu_hugepages',
'pdpe1gb': 'cpu_hugepages_1g',
'smx': 'cpu_txt',
}
opts = [
cfg.IntOpt('status_check_period', default=60,
help=_('period (in seconds) to check status of nodes '
'on inspection')),
cfg.StrOpt('extra_kernel_params', default='',
help=_('extra kernel parameters to pass to the inspection '
'ramdisk when boot is managed by ironic (not '
'ironic-inspector). Pairs key=value separated by '
'spaces.')),
cfg.BoolOpt('power_off', default=True,
help=_('whether to power off a node after inspection '
'finishes. Ignored for nodes that have fast '
'track mode enabled.')),
cfg.StrOpt('callback_endpoint_override',
help=_('endpoint to use as a callback for posting back '
'introspection data when boot is managed by ironic. '
'Standard keystoneauth options are used by default.')),
# TODO(dtantsur): change the default to True when ironic-inspector is no
# longer supported (and update the help string).
cfg.BoolOpt('require_managed_boot', default=None,
help=_('require that the in-band inspection boot is fully '
'managed by the node\'s boot interface. Set this to '
'False if your installation has a separate (i)PXE boot '
'environment for node discovery or unmanaged '
'inspection. You may need to set it to False to '
'inspect nodes that are not supported by boot '
'interfaces (e.g. because they don\'t have ports). '
'The default value depends on which inspect interface '
'is used: inspector uses False, agent - True.')),
cfg.StrOpt('add_ports',
default='pxe',
help=_('Which MAC addresses to add as ports during '
'inspection.'),
choices=list(VALID_ADD_PORTS_VALUES.items())),
cfg.StrOpt('keep_ports',
default='all',
help=_('Which ports (already present on a node) to keep after '
'inspection.'),
choices=list(VALID_KEEP_PORTS_VALUES.items())),
cfg.BoolOpt('update_pxe_enabled',
default=True,
help=_('Whether to update the ports\' pxe_enabled field '
'according to the inspection data.')),
cfg.StrOpt('default_hooks',
default='ramdisk-error,validate-interfaces,ports,architecture',
help=_('A comma-separated lists of inspection hooks that are '
'run by default. In most cases, the operators will not '
'modify this. The default (somewhat conservative) hooks '
'will raise an exception in case the ramdisk reports an '
'error, validate interfaces in the inventory, create '
'ports and set the node\'s cpu architecture property.')),
cfg.StrOpt('hooks',
default='$default_hooks',
help=_('Comma-separated list of enabled hooks for processing '
'pipeline. The default for this is $default_hooks. '
'Hooks can be added before or after the defaults '
'like this: "prehook,$default_hooks,posthook".')),
cfg.StrOpt('known_accelerators',
default=os.path.join(
'$pybasedir',
'drivers/modules/inspector/hooks/known_accelerators.yaml'),
help=_('Path to the file which contains the known accelerator '
'devices, to be used by the "accelerators" inspection '
'hook.')),
cfg.DictOpt('cpu_capabilities',
default=DEFAULT_CPU_FLAGS_MAPPING,
help='Mapping between a CPU flag and a node capability to set '
'if this CPU flag is present. This configuration option '
'is used by the "cpu-capabilities" inspection hook.'),
cfg.BoolOpt('extra_hardware_strict',
default=False,
help=_('If True, refuse to parse extra data (in plugin_data) '
'if at least one record is too short. Additionally, '
'remove the incoming "data" even if parsing failed. '
'This configuration option is used by the '
'"extra-hardware" inspection hook.')),
cfg.MultiStrOpt('pci_device_alias',
default=[],
help=_('An alias for a PCI device identified by '
'\'vendor_id\' and \'product_id\' fields. Format: '
'{"vendor_id": "1234", "product_id": "5678", '
'"name": "pci_dev1"}. Use double quotes for the '
'keys and values.')),
cfg.ListOpt('physical_network_cidr_map',
default=[],
sample_default=('10.10.10.0/24:physnet_a,'
'2001:db8::/64:physnet_b'),
help=_('Mapping of IP subnet CIDR to physical network. When '
'the phyical-network inspection hook is enabled, the '
'"physical_network" property of corresponding '
'baremetal ports is populated based on this mapping.')),
cfg.BoolOpt('disk_partitioning_spacing',
default=True,
help=_('Whether to leave 1 GiB of disk size untouched for '
'partitioning. Only has effect when used with the IPA '
'as a ramdisk, for older ramdisk local_gb is '
'calculated on the ramdisk side. This configuration '
'option is used by the "root-device" inspection hook.'))
]
discovery_opts = [
cfg.BoolOpt('enabled',
default=False, mutable=True,
help=_("Setting this to True enables automatic enrollment "
"of inspected nodes that are not recognized. "
"When enabling this feature, keep in mind that any "
"machine hitting the inspection callback endpoint "
"will be automatically enrolled. The driver must be "
"set when setting this to True.")),
cfg.StrOpt('driver',
mutable=True,
help=_("The default driver to use for newly enrolled nodes. "
"Must be set when enabling auto-discovery.")),
]
pxe_filter_opts = [
cfg.StrOpt('dhcp_hostsdir',
help=_('The MAC address cache directory, exposed to dnsmasq.'
'This directory is expected to be in exclusive control '
'of the driver but must be purged by the operator. '
'Required.')),
cfg.ListOpt('supported_inspect_interfaces',
default=['agent'], mutable=True,
help=_("List of inspect interfaces that will be considered "
"by the PXE filter. Only nodes with these interfaces "
"will be enabled.")),
cfg.IntOpt('sync_period',
default=45, mutable=True,
help=_("Period (in seconds) between synchronizing the state "
"of dnsmasq with the database.")),
]
[docs]
def register_opts(conf):
conf.register_opts(opts, group='inspector')
conf.register_opts(discovery_opts, group='auto_discovery')
conf.register_opts(pxe_filter_opts, group='pxe_filter')
auth.register_auth_opts(conf, 'inspector',
service_type='baremetal-introspection')
[docs]
def list_opts():
return auth.add_auth_opts(opts, service_type='baremetal-introspection')
