Deploying with anaconda deploy interface

Ironic supports deploying an OS with the anaconda installer. This anaconda deploy interface works with pxe and ipxe boot interfaces.

Configuration

The anaconda deploy interface is not enabled by default. To enable this, add anaconda to the value of the enabled_deploy_interfaces configuration option in ironic.conf. For example:

[DEFAULT]
...
enabled_deploy_interfaces = direct,anaconda
...

This change takes effect after all the ironic conductors have been restarted.

The default kickstart template is specified via the configuration option [anaconda]default_ks_template. It is set to this ks.cfg.template but can be modified to be some other template.

[anaconda]
default_ks_template = file:///etc/ironic/ks.cfg.template

When creating an ironic node, specify anaconda as the deploy interface. For example:

baremetal node create --driver ipmi \
    --deploy-interface anaconda \
    --boot-interface ipxe

You can also set the anaconda deploy interface via --deploy-interface on an existing node:

baremetal node set <node> --deploy-interface anaconda

Creating an OS Image

While anaconda allows installing individual RPMs, the default kickstart file expects an OS tarball to be used as the OS image.

This baremetal.yum file contains all the yum/dnf commands that need to be run in order to generate the OS tarball. These commands install packages and package groups that need to be in the image:

group install 'Minimal Install'
install cloud-init
ts run

An OS tarball can be created using following set of commands, along with the above baremetal.yum file:

export CHROOT=/home/<user>/os-image
mkdir -p $(CHROOT)
mkdir -p $(CHROOT)/{dev,proc,run,sys}
chown -hR root:root $(CHROOT)
mount --bind /var/cache/yum $(CHROOT)/var/cache/yum
mount --bind /dev $(CHROOT)/dev
mount -t proc proc $(CHROOT)/proc
mount -t tmpfs tmpfs $(CHROOT)/run
mount -t sysfs sysfs $(CHROOT)/sys
dnf -y --installroot=$(CHROOT) makecache
dnf -y --installroot=$(CHROOT) shell baremetal.yum
rpm --root $(CHROOT) --import $(CHROOT)/etc/pki/rpm-gpg/RPM-GPG-KEY-*
truncate -s 0 $(CHROOT)/etc/machine-id
umount $(CHROOT)/var/cache/yum
umount $(CHROOT)/dev
umount $(CHROOT)/proc
umount $(CHROOT)/run
umount $(CHROOT)/sys
tar cpzf os-image.tar.gz --xattrs --acls --selinux -C $(CHROOT) .

Configuring the OS Image in glance

Anaconda is a two-stage installer – stage 1 consists of the kernel and ramdisk and stage 2 lives in a squashfs file. All these components can be found in the CentOS/RHEL/Fedora ISO images.

The kernel and ramdisk can be found at /images/pxeboot/vmlinuz and /images/pxeboot/initrd.img respectively in the ISO. The stage 2 squashfs image can be normally found at /LiveOS/squashfs.img or /images/install.img.

The OS tarball must be configured with the following properties in glance, in order to be used with the anaconda deploy driver:

  • kernel_id

  • ramdisk_id

  • stage2_id

  • disk_file_extension (optional)

Valid disk_file_extension values are .img, .tar, .tbz, .tgz, .txz, .tar.gz, .tar.bz2, and .tar.xz. When disk_file_extension property is not set to one of the above valid values the anaconda installer will assume that the image provided is a mountable OS disk.

This is an example of adding the anaconda-related images and the OS tarball to glance:

openstack image create --file ./vmlinuz --container-format aki \
    --disk-format aki --shared anaconda-kernel-<version>
openstack image create --file ./initrd.img --container-format ari \
    --disk-format ari --shared anaconda-ramdisk-<version>
openstack image create --file ./squashfs.img --container-format ari \
    --disk-format ari --shared anaconda-stage-<verison>
openstack image create --file ./os-image.tar.gz \
    --container-format bare --disk-format raw --shared \
    --property kernel_id=<glance_uuid_vmlinuz> \
    --property ramdisk_id=<glance_uuid_ramdisk> \
    --property stage2_id=<glance_uuid_stage2> disto-name-version \
    --property disk_file_extension=.tgz

Creating a bare metal server

Apart from uploading a custom kickstart template to glance and associating it with the OS image via the ks_template property in glance, operators can also set the kickstart template in the ironic node’s instance_info field. The kickstart template set in instance_info takes precedence over the one specified via the OS image in glance. If no kickstart template is specified (via the node’s instance_info or ks_template glance image property), the default kickstart template will be used to deploy the OS.

This is an example of how to set the kickstart template for a specific ironic node:

openstack baremetal node set <node> \
    --instance_info ks_template=glance://uuid

Warning

In the Ironic Project terminology, the word template often refers to a file which is supplied to the deployment, which Ironic supplies parameters to render a specific output. One critical example of this in the Ironic workflow, specifically with this driver, is that the generated agent token is conveyed to the booting ramdisk, facilitating it to call back to Ironic and indicate the state. This token is randomly generated for every deploy, and is required. Specifically this is leveraged in the template’s pre, onerror, and post steps. For more infomation on Agent Token, please see Agent Token.

Standalone deployments

While this deployment interface driver was developed around the use of other OpenStack services, it is not explicitly required. For example HTTP(S) URLs can be supplied by the API user to explictly set the expected baremetal node instance_info fields

baremetal node set <node> \
   --instance_info image_source=<Mirror URL> \
   --instance_info kernel=<Kernel URL> \
   --instance_info ramdisk=<Initial Ramdisk URL> \
   --instance_info stage2=<Installer Stage2 Ramdisk URL>

When doing so, you may wish to also utilize a customized kickstart template, which can also be a URL. Please reference the ironic community provided template ks.cfg.template and use it as a basis of your own kickstart as it accounts for the particular stages and appropriate callbacks to Ironic.

Warning

The default template (for the kickstart ‘liveimg’ command) expects an instance_info\image_info setting to be provided by the user, which serves as a base operating system image. In the context of the anaconda driver, it should be thought of almost like “stage3”. If you’re using a custom template, it may not be required, but proceed with caution. See pykickstart documentation for more information on liveimg file format, structure, and use.

baremetal node set <node> \
    --instance_info ks_template=<URL>

If you do choose to use a liveimg with a customized template, or if you wish to use the stock template with a liveimg, you will need to provide this setting.

baremetal node set <node> \
    --instance_info image_info=<URL>

Warning

This is required if you do not utilize a customised template. As in use Ironic’s stock template.

The pattern of deployment in this case is identical to a deployment case where Ironic is integrated with OpenStack, however in this case Ironic collects the files, and stages them appropriately.

At this point, you should be able to request the baremetal node to deploy.

Standalone using a repository

Anaconda supports a concept of passing a repository as opposed to a dedicated URL path which has a .treeinfo file, which tells the initial boot scripts where to get various dependencies, such as what would be used as the anaconda stage2 ramdisk. Unfortunately, this functionality is not well documented.

An example .treeinfo file can be found at http://mirror.stream.centos.org/9-stream/BaseOS/x86_64/os/.treeinfo.

Note

In the context of the .treeinfo file and the related folder structure for a deployment utilizing the anaconda deployment interface, images/install.img file represents a stage2 ramdisk.

In the context of one wishing to deploy Centos Stream-9, the following may be useful.

baremetal node set <node> \
    --instance_info image_source=http://mirror.stream.centos.org/9-stream/BaseOS/x86_64/os/ \
    --instance_info kernel=http://mirror.stream.centos.org/9-stream/BaseOS/x86_64/os/images/pxeboot/vmlinuz \
    --instance_info ramdisk=http://mirror.stream.centos.org/9-stream/BaseOS/x86_64/os/images/pxeboot/initrd.img

Once set, a kickstart template can be provided via an instance_info parameter, and the node deployed.

Deployment Process

At a high level, the mechanics of the anaconda driver works in the following flow, where we also note the stages and purpose of each part for informational purposes.

  1. Network Boot Program (Such as iPXE) downloads the kernel, and initial ramdisk.

  2. Kernel launches, uncompresses initial ramdisk, and executes init inside of the ramdisk.

  3. The initial ramdisk boot scripts, such as Dracut, recognize the kernel command line parameters Ironic supplied with the boot configuration, and downloads the second stage artifacts, in this case called the stage2 image. This image contains Anaconda and base dependencies.

  4. Anaconda downloads and parses the kickstart configuration which was also supplied on the kernel command line, and executes the commands as defined in the kickstart template.

  5. The kickstart template, if specified in its contents, downloads a liveimg which is used as the base operating system image to start with.

Limitations

This deploy interface has only been tested with Red Hat based operating systems that use anaconda. Other systems are not supported.

Runtime TLS certifiate injection into ramdisks is not supported. Assets such as ramdisk or a stage2 ramdisk image need to have trusted Certificate Authority certificates present within the images or the Ironic API endpoint utilized should utilize a known trusted Certificate Authority.