Manila in Kolla
Overview
Currently, Kolla can deploy following manila services:
- manila-api
- manila-scheduler
- manila-share
The OpenStack Shared File Systems service (Manila) provides file storage to a
virtual machine. The Shared File Systems service provides an infrastructure
for managing and provisioning of file shares. The service also enables
management of share types as well as share snapshots if a driver supports
them.
Important
For simplicity, this guide describes configuring the Shared File Systems
service to use the generic back end with the driver handles share
server mode (DHSS) enabled that uses Compute (nova), Networking (neutron)
and Block storage (cinder) services.
Networking service configuration requires the capability of networks being
attached to a public router in order to create shared networks.
Before you proceed, ensure that Compute, Networking and Block storage
services are properly working.
Preparation and Deployment
Cinder and Ceph are required, enable it in /etc/kolla/globals.yml:
enable_cinder: "yes"
enable_ceph: "yes"
Enable Manila and generic back end in /etc/kolla/globals.yml:
enable_manila: "yes"
enable_manila_backend_generic: "yes"
By default Manila uses instance flavor id 100 for its file systems. For Manila
to work, either create a new nova flavor with id 100 (use nova flavor-create)
or change service_instance_flavor_id to use one of the default nova flavor
ids.
Ex: service_instance_flavor_id = 2 to use nova default flavor m1.small.
Create or modify the file /etc/kolla/config/manila-share.conf and add the
contents:
[generic]
service_instance_flavor_id = 2
Verify Operation
Verify operation of the Shared File Systems service. List service components
to verify successful launch of each process:
# manila service-list
+------------------+----------------+------+---------+-------+----------------------------+-----------------+
| Binary | Host | Zone | Status | State | Updated_at | Disabled Reason |
+------------------+----------------+------+---------+-------+----------------------------+-----------------+
| manila-scheduler | controller | nova | enabled | up | 2014-10-18T01:30:54.000000 | None |
| manila-share | share1@generic | nova | enabled | up | 2014-10-18T01:30:57.000000 | None |
+------------------+----------------+------+---------+-------+----------------------------+-----------------+
Launch an Instance
Before being able to create a share, the manila with the generic driver and the
DHSS mode enabled requires the definition of at least an image, a network and a
share-network for being used to create a share server. For that back end
configuration, the share server is an instance where NFS/CIFS shares are
served.
Determine the configuration of the share server
Create a default share type before running manila-share service:
# manila type-create default_share_type True
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
| ID | Name | Visibility | is_default | required_extra_specs | optional_extra_specs |
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
| 8a35da28-0f74-490d-afff-23664ecd4f01 | default_share_type | public | - | driver_handles_share_servers : True | snapshot_support : True |
+--------------------------------------+--------------------+------------+------------+-------------------------------------+-------------------------+
Create a manila share server image to the Image service:
# wget http://tarballs.openstack.org/manila-image-elements/images/manila-service-image-master.qcow2
# glance image-create --name "manila-service-image" \
--file manila-service-image-master.qcow2 \
--disk-format qcow2 --container-format bare \
--visibility public --progress
[=============================>] 100%
+------------------+--------------------------------------+
| Property | Value |
+------------------+--------------------------------------+
| checksum | 48a08e746cf0986e2bc32040a9183445 |
| container_format | bare |
| created_at | 2016-01-26T19:52:24Z |
| disk_format | qcow2 |
| id | 1fc7f29e-8fe6-44ef-9c3c-15217e83997c |
| min_disk | 0 |
| min_ram | 0 |
| name | manila-service-image |
| owner | e2c965830ecc4162a002bf16ddc91ab7 |
| protected | False |
| size | 306577408 |
| status | active |
| tags | [] |
| updated_at | 2016-01-26T19:52:28Z |
| virtual_size | None |
| visibility | public |
+------------------+--------------------------------------+
List available networks to get id and subnets of the private network:
+--------------------------------------+---------+----------------------------------------------------+
| id | name | subnets |
+--------------------------------------+---------+----------------------------------------------------+
| 0e62efcd-8cee-46c7-b163-d8df05c3c5ad | public | 5cc70da8-4ee7-4565-be53-b9c011fca011 10.3.31.0/24 |
| 7c6f9b37-76b4-463e-98d8-27e5686ed083 | private | 3482f524-8bff-4871-80d4-5774c2730728 172.16.1.0/24 |
+--------------------------------------+---------+----------------------------------------------------+
Create a shared network
# manila share-network-create --name demo-share-network1 \
--neutron-net-id PRIVATE_NETWORK_ID \
--neutron-subnet-id PRIVATE_NETWORK_SUBNET_ID
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| name | demo-share-network1 |
| segmentation_id | None |
| created_at | 2016-01-26T20:03:41.877838 |
| neutron_subnet_id | 3482f524-8bff-4871-80d4-5774c2730728 |
| updated_at | None |
| network_type | None |
| neutron_net_id | 7c6f9b37-76b4-463e-98d8-27e5686ed083 |
| ip_version | None |
| nova_net_id | None |
| cidr | None |
| project_id | e2c965830ecc4162a002bf16ddc91ab7 |
| id | 58b2f0e6-5509-4830-af9c-97f525a31b14 |
| description | None |
+-------------------+--------------------------------------+
Create a flavor (Required if you not defined manila_instance_flavor_id in
/etc/kolla/config/manila-share.conf file)
# nova flavor-create manila-service-flavor 100 128 0 1
Create a share
Create a NFS share using the share network:
# manila create NFS 1 --name demo-share1 --share-network demo-share-network1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | None |
| share_type_name | None |
| description | None |
| availability_zone | None |
| share_network_id | None |
| export_locations | [] |
| host | None |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 016ca18f-bdd5-48e1-88c0-782e4c1aa28c |
| size | 1 |
| name | demo-share1 |
| share_type | None |
| created_at | 2016-01-26T20:08:50.502877 |
| export_location | None |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 48e8c35b2ac6495d86d4be61658975e7 |
| metadata | {} |
+-----------------------------+--------------------------------------+
After some time, the share status should change from creating
to available:
# manila list
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+-----------------------------+-------------------+
| ID | Name | Size | Share Proto | Status | Is Public | Share Type Name | Host | Availability Zone |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+-----------------------------+-------------------+
| e1e06b14-ba17-48d4-9e0b-ca4d59823166 | demo-share1 | 1 | NFS | available | False | default_share_type | share1@generic#GENERIC | nova |
+--------------------------------------+-------------+------+-------------+-----------+-----------+--------------------------------------+-----------------------------+-------------------+
Configure user access to the new share before attempting to mount it via the
network:
# manila access-allow demo-share1 ip INSTANCE_PRIVATE_NETWORK_IP
Mount the share from an instance
Get export location from share
# manila show demo-share1
+-----------------------------+----------------------------------------------------------------------+
| Property | Value |
+-----------------------------+----------------------------------------------------------------------+
| status | available |
| share_type_name | default_share_type |
| description | None |
| availability_zone | nova |
| share_network_id | fa07a8c3-598d-47b5-8ae2-120248ec837f |
| export_locations | |
| | path = 10.254.0.3:/shares/share-422dc546-8f37-472b-ac3c-d23fe410d1b6 |
| | preferred = False |
| | is_admin_only = False |
| | id = 5894734d-8d9a-49e4-b53e-7154c9ce0882 |
| | share_instance_id = 422dc546-8f37-472b-ac3c-d23fe410d1b6 |
| share_server_id | 4782feef-61c8-4ffb-8d95-69fbcc380a52 |
| host | share1@generic#GENERIC |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | e1e06b14-ba17-48d4-9e0b-ca4d59823166 |
| size | 1 |
| name | demo-share1 |
| share_type | 6e1e803f-1c37-4660-a65a-c1f2b54b6e17 |
| has_replicas | False |
| replication_type | None |
| created_at | 2016-03-15T18:59:12.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 9dc02df0f2494286ba0252b3c81c01d0 |
| metadata | {} |
+-----------------------------+----------------------------------------------------------------------+
Create a folder where the mount will be placed:
Mount the NFS share in the instance using the export location of the share:
# mount -v 10.254.0.3:/shares/share-422dc546-8f37-472b-ac3c-d23fe410d1b6 ~/test_folder
Share Migration
As administrator, you can migrate a share with its data from one location to
another in a manner that is transparent to users and workloads. You can use
manila client commands to complete a share migration.
For share migration, is needed modify manila.conf and set a ip in the same
provider network for data_node_access_ip.
Modify the file /etc/kolla/config/manila.conf and add the contents:
[DEFAULT]
data_node_access_ip = 10.10.10.199
Use the manila migration command, as shown in the following example:
manila migration-start --preserve-metadata True|False \
--writable True|False --force_host_assisted_migration True|False \
--new_share_type share_type --new_share_network share_network \
shareID destinationHost
--force-host-copy: Forces the generic host-based migration mechanism and
bypasses any driver optimizations.destinationHost: Is in this format host#pool which includes
destination host and pool.--writable and --preserve-metadata: Are only for driver assisted.--new_share_network: Only if driver supports shared network.--new_share_type: Choose share type compatible with destinationHost.
Checking share migration progress
Use the manila migration-get-progress shareID command to check progress.
manila migration-get-progress demo-share1
+----------------+-----------------------+
| Property | Value |
+----------------+-----------------------+
| task_state | data_copying_starting |
| total_progress | 0 |
+----------------+-----------------------+
manila migration-get-progress demo-share1
+----------------+-------------------------+
| Property | Value |
+----------------+-------------------------+
| task_state | data_copying_completing |
| total_progress | 100 |
+----------------+-------------------------+
Use the manila migration-complete shareID command to complete share
migration process
For more information about how to manage shares, see the
Manage shares.
