Zun - Container service¶

“Zun is an OpenStack Container service. It aims to provide an OpenStack API for provisioning and managing containerized workload on OpenStack.” For more details about Zun, see OpenStack Zun Documentation.

Preparation and Deployment¶

By default Zun and its dependencies are disabled. In order to enable Zun, you need to edit globals.yml and set the following variables:

enable_zun: "yes"
enable_kuryr: "yes"
enable_etcd: "yes"
docker_configure_for_zun: "yes"

Docker reconfiguration requires reboostrapping before deploy. Make sure you understand the consequences of restarting Docker. Please see Subsequent bootstrap considerations for details. If it’s initial deploy, then there is nothing to worry about because it’s initial bootstrapping as well and there are no running services to affect.

$ kolla-ansible bootstrap-servers

Finally deploy:

$ kolla-ansible deploy

Verification¶

Generate the credentials file:
```
$ kolla-ansible post-deploy
```
Source credentials file:
```
$ . /etc/kolla/admin-openrc.sh
```

Download and create a glance container image:

$ docker pull cirros
$ docker save cirros | openstack image create cirros --public \
  --container-format docker --disk-format raw

Create zun container:
```
$ zun create --name test --net network=demo-net cirros ping -c4 8.8.8.8
```
Note

Kuryr does not support networks with DHCP enabled, disable DHCP in the subnet used for zun containers.
```
$ openstack subnet set --no-dhcp <subnet>
```

Verify container is created:

$ zun list

+--------------------------------------+------+---------------+---------+------------+------------+-------+
| uuid                                 | name | image         | status  | task_state | addresses  | ports |
+--------------------------------------+------+---------------+---------+------------+------------+-------+
| 3719a73e-5f86-47e1-bc5f-f4074fc749f2 | test | cirros        | Created | None       | 172.17.0.3 | []    |
+--------------------------------------+------+---------------+---------+------------+------------+-------+

Start container:

$ zun start test
Request to start container test has been accepted.

Verify container:

$ zun logs test
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=45 time=96.396 ms
64 bytes from 8.8.8.8: seq=1 ttl=45 time=96.504 ms
64 bytes from 8.8.8.8: seq=2 ttl=45 time=96.721 ms
64 bytes from 8.8.8.8: seq=3 ttl=45 time=95.884 ms

--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 95.884/96.376/96.721 ms

For more information about how zun works, see zun, OpenStack Container service.