Kuryr Kubernetes Integration Design

Purpose

The purpose of this document is to present the main Kuryr-K8s integration components and capture the design decisions of each component currently taken by the kuryr team.

Goal Statement

Enable OpenStack Neutron realization of the Kubernetes networking. Start by supporting network connectivity and expand to support advanced features, such as Network Policies. In the future, it may be extended to some other openstack services.

Overview

In order to integrate Neutron into kubernetes networking, 2 components are introduced: Controller and CNI Driver. Controller is a supervisor component responsible to maintain translation of networking relevant Kubernetes model into the OpenStack (i.e. Neutron) model. This can be considered as a centralized service (supporting HA mode in the future). CNI driver is responsible for binding kubernetes pods on worker nodes into Neutron ports ensuring requested level of isolation. Please see below the component view of the integrated system:

Design Principles

1. Loose coupling between integration components.

2. Flexible deployment options to support different project, subnet and security groups assignment profiles.

3. The communication of the pod binding data between Controller and CNI driver should rely on existing communication channels, currently added to the pod metadata via annotations.

4. CNI Driver should not depend on Neutron. It gets all required details from Kubernetes API server (currently through Kubernetes annotations), therefore depending on Controller to perform its translation tasks.

5. Allow different neutron backends to bind Kubernetes pods without code modification. This means that both Controller and CNI binding mechanism should allow loading of the vif management and binding components, manifested via configuration. If some vendor requires some extra code, it should be handled in one of the stevedore drivers.

Kuryr Controller Design

Controller is responsible for watching Kubernetes API endpoints to make sure that the corresponding model is maintained in Neutron. Controller updates K8s resources endpoints’ annotations to keep neutron details required by the CNI driver as well as for the model mapping persistency.

Controller is composed from the following components:

Watcher

Watcher is a common software component used by both the Controller and the CNI driver. Watcher connects to Kubernetes API. Watcher’s responsibility is to observe the registered (either on startup or dynamically during its runtime) endpoints and invoke registered callback handler (pipeline) to pass all events from registered endpoints.

Event Handler

EventHandler is an interface class for the Kubernetes event handling. There are several ‘wrapper’ event handlers that can be composed to implement Controller handling pipeline.

Retry Event Handler is used for handling specified failures during event processing. It can be used to ‘wrap’ another EventHandler and in case of specified error will retry the wrapped event handler invocation within specified timeout. In case of persistent failure, Retry will raise the wrapped EventHandler exception.

Async Event Handler is used to execute event handling asynchronously. Events are grouped based on the specified ‘thread_groups’. Events of the same group are processed in order of arrival. Thread group maps to an unique K8s resource (each Pod, Service, etc.). Async can be used to ‘wrap’ another EventHandler. Queues per thread group are added dynamically once relevant events arrive and removed once queue is empty.

LogExceptions Event Handler suppresses exceptions and sends them to log facility.

Dispatcher is an Event Handler that distributes events to registered handlers based on event content and handler predicate provided during event handler registration.

ControllerPipeline

ControllerPipeline serves as an event dispatcher of the Watcher for Kuryr-K8s controller Service. Currently watched endpoints are ‘pods’, ‘services’ and ‘endpoints’. Kubernetes resource event handlers (Event Consumers) are registered into the Controller Pipeline. There is a special EventConsumer, ResourceEventHandler, that provides API for Kubernetes event handling. When a watched event arrives, it is processed by all Resource Event Handlers registered for specific Kubernetes object kind. Pipeline retries on resource event handler invocation in case of the ResourceNotReady exception till it succeeds or the number of retries (time-based) is reached. Any unrecovered failure is logged without affecting other Handlers (of the current and other events). Events of the same group (same Kubernetes object) are handled sequentially in the order arrival. Events of different Kubernetes objects are handled concurrently.

ResourceEventHandler

ResourceEventHandler is a convenience base class for the Kubernetes event processing. The specific Handler associates itself with specific Kubernetes object kind (through setting OBJECT_KIND) and is expected to implement at least one of the methods of the base class to handle at least one of the ADDED/MODIFIED/DELETED events of the Kubernetes object. For details, see k8s-api. Since both ADDED and MODIFIED event types trigger very similar sequence of actions, Handler has ‘on_present’ method that is invoked for both event types. The specific Handler implementation should strive to put all the common ADDED and MODIFIED event handling logic in this method to avoid code duplication.

Pluggable Handlers

Starting with the Rocky release, Kuryr-Kubernetes includes a pluggable interface for the Kuryr controller handlers. The pluggable handlers framework allows :

• Using externally provided handlers.

• Controlling which handlers should be active.

To control which Kuryr Controller handlers should be active, the selected handlers need to be included in kuryr.conf at the ‘kubernetes’ section. If not specified, Kuryr Controller will run the default handlers, which currently includes the following:

Handler	Kubernetes resource
vif	Pod
lb	Endpoint
lbaasspec	Service

For example, to enable only the ‘vif’ controller handler we should set the following at kuryr.conf:

[kubernetes]
enabled_handlers=vif

Providers

Provider (Drivers) are used by ResourceEventHandlers to manage specific aspects of the Kubernetes resource in the OpenStack domain. For example, creating a Kubernetes Pod will require a neutron port to be created on a specific network with the proper security groups applied to it. There will be dedicated Drivers for Project, Subnet, Port and Security Groups settings in neutron. For instance, the Handler that processes pod events, will use PodVIFDriver, PodProjectDriver, PodSubnetsDriver and PodSecurityGroupsDriver. The Drivers model is introduced in order to allow flexibility in the Kubernetes model mapping to the OpenStack. There can be different drivers that do Neutron resources management, i.e. create on demand or grab one from the precreated pool. There can be different drivers for the Project management, i.e. single Tenant or multiple. Same goes for the other drivers. There are drivers that handle the Pod based on the project, subnet and security groups specified via configuration settings during cluster deployment phase.

NeutronPodVifDriver

PodVifDriver subclass should implement request_vif, release_vif and activate_vif methods. In case request_vif returns Vif object in down state, Controller will invoke activate_vif. Vif ‘active’ state is required by the CNI driver to complete pod handling. The NeutronPodVifDriver is the default driver that creates neutron port upon Pod addition and deletes port upon Pod removal.

CNI Driver

CNI driver is just a thin client that passes CNI ADD and DEL requests to kuryr-daemon instance via its HTTP API. It’s a simple executable that is supposed to be called by kubelet’s CNI. Since Train release the CNI driver has an alternative golang implementation (see the kuryr_cni directory) to make injecting it onto the Kubernetes node from the kuryr-cni pod easier. This enables Kuryr to work on K8s deployments that does not have Python or curl on Kubernetes nodes. Compatibility between Python and golang CNI drivers is supposed to be maintained.

CNI Daemon

CNI Daemon is a service that should run on every Kubernetes node. Starting from Rocky release it should be seen as a default supported deployment option. And running without it is impossible starting from Stein release. It is responsible for watching pod events on the node it’s running on, answering calls from CNI Driver and attaching VIFs when they are ready. In the future it will also keep information about pooled ports in memory. This helps to limit the number of processes spawned when creating multiple Pods, as a single Watcher is enough for each node and CNI Driver will only wait on local network socket for response from the Daemon.

Currently CNI Daemon consists of two processes i.e. Watcher and Server. Processes communicate between each other using Python’s multiprocessing.Manager and a shared dictionary object. Watcher is responsible for extracting VIF annotations from Pod events and putting them into the shared dictionary. Server is a regular WSGI server that will answer CNI Driver calls. When a CNI request comes, Server is waiting for VIF object to appear in the shared dictionary. As annotations are read from kubernetes API and added to the registry by Watcher thread, Server will eventually get VIF it needs to connect for a given pod. Then it waits for the VIF to become active before returning to the CNI Driver.

Communication

CNI Daemon Server is starting an HTTP server on a local network socket (127.0.0.1:5036 by default). Currently server is listening for 2 API calls. Both calls load the CNIParameters from the body of the call (it is expected to be JSON).

For reference see updated pod creation flow diagram:

/addNetwork

Function: Is equivalent of running K8sCNIPlugin.add.

Return code: 201 Created

Return body: Returns VIF data in JSON form. This is serialized oslo.versionedobject from os_vif library. On the other side it can be deserialized using o.vo’s obj_from_primitive() method.

/delNetwork

Function: Is equivalent of running K8sCNIPlugin.delete.

Return code: 204 No content

Return body: None.

When running in daemonized mode, CNI Driver will call CNI Daemon over those APIs to perform its tasks and wait on socket for result.

Kubernetes Documentation

The Kubernetes reference documentation is a great source for finding more details about Kubernetes API, CLIs, and tools.