Manually Adding Magnum to DevStackΒΆ

If you are getting started with magnum it is recommended you follow the Developer Quick-Start to get up and running with magnum. This guide covers a more in-depth process to setup magnum with devstack.

Magnum depends on nova, glance, heat, barbican, and neutron to create and schedule virtual machines to simulate bare-metal. Full bare-metal support is still under active development.

This session has only been tested on Ubuntu 14.04 (Trusty) and Fedora 20/21. We recommend users to select one of them if it is possible.

Clone devstack:

cd ~
git clone https://git.openstack.org/openstack-dev/devstack

Configure devstack with the minimal settings required to enable heat and neutron:

cd devstack
cat > local.conf << END
[[local|localrc]]
# Modify to your environment
FIXED_RANGE=10.0.0.0/24
FLOATING_RANGE=192.168.1.224/27
PUBLIC_NETWORK_GATEWAY=192.168.1.225
PUBLIC_INTERFACE=em1
PHYSICAL_NETWORK=public
OVS_PHYSICAL_BRIDGE=br-ex
ENABLE_TENANT_VLANS=True
TENANT_VLAN_RANGE=1000:1999

# Credentials
ADMIN_PASSWORD=password
DATABASE_PASSWORD=password
RABBIT_PASSWORD=password
SERVICE_PASSWORD=password
SERVICE_TOKEN=password

enable_service rabbit

# Ensure we are using neutron networking rather than nova networking
disable_service n-net
enable_service q-svc
enable_service q-agt
enable_service q-dhcp
enable_service q-l3
enable_service q-meta
enable_service neutron

# Disable LBaaS(v1) service
disable_service q-lbaas

# Enable LBaaS(v2) services
enable_service q-lbaasv2
enable_service octavia
enable_service o-cw
enable_service o-hk
enable_service o-hm
enable_service o-api

# Enable heat plugin
enable_plugin heat https://git.openstack.org/openstack/heat
# Enable barbican services
enable_plugin barbican https://git.openstack.org/openstack/barbican
enable_plugin neutron-lbaas https://git.openstack.org/openstack/neutron-lbaas
enable_plugin octavia https://git.openstack.org/openstack/octavia

VOLUME_BACKING_FILE_SIZE=20G
END

NOTE: Update PUBLIC_INTERFACE and other parameters as appropriate for your system. NOTE: Enable heat plugin is necessary.

More devstack configuration information can be found at http://docs.openstack.org/developer/devstack/configuration.html

More neutron configuration information can be found at http://docs.openstack.org/developer/devstack/guides/neutron.html

Optionally, you can enable ceilometer in devstack. If ceilometer is enabled, magnum will periodically send metrics to ceilometer. If you need this feature, add the following line to your local.conf file:

enable_plugin ceilometer git://git.openstack.org/openstack/ceilometer

Create a local.sh to automatically make necessary networking changes during the devstack deployment process. This will allow clusters spawned by magnum to access the internet through PUBLIC_INTERFACE:

cat > local.sh << 'END_LOCAL_SH'
#!/bin/sh
ROUTE_TO_INTERNET=$(ip route get 8.8.8.8)
OBOUND_DEV=$(echo ${ROUTE_TO_INTERNET#*dev} | awk '{print $1}')
sudo iptables -t nat -A POSTROUTING -o $OBOUND_DEV -j MASQUERADE
END_LOCAL_SH
chmod 755 local.sh

Run devstack:

./stack.sh

NOTE: If using the m-1 tag or tarball, please use the documentation shipped with the milestone as the current master instructions are slightly incompatible.

Prepare your session to be able to use the various OpenStack clients including magnum, neutron, and glance. Create a new shell, and source the devstack openrc script:

source ~/devstack/openrc admin admin

Magnum has been tested with the Fedora Atomic micro-OS and CoreOS. Magnum will likely work with other micro-OS platforms, but each requires individual support in the heat template.

Store the Fedora Atomic micro-OS in glance. Download the qcow2 Atomic image from https://fedorapeople.org/groups/magnum/fedora-atomic-newton.qcow2 and then upload it to glance:

glance image-create --name fedora-atomic-newton \
                    --visibility public \
                    --disk-format qcow2 \
                    --os-distro fedora-atomic \
                    --container-format bare < fedora-atomic-newton.qcow2

Create a domain and domain admin for trust:

TRUSTEE_DOMAIN_ID=$(
    openstack domain create magnum \
        --description "Owns users and projects created by magnum" \
        -f value -c id
)
TRUSTEE_DOMAIN_ADMIN_ID=$(
    openstack user create trustee_domain_admin \
        --password "password" \
        --domain=${TRUSTEE_DOMAIN_ID} \
        --or-show \
        -f value -c id
)
openstack --os-identity-api-version 3 role add \
          --user $TRUSTEE_DOMAIN_ADMIN_ID --domain $TRUSTEE_DOMAIN_ID \
          admin

Create a keypair for use with the ClusterTemplate:

test -f ~/.ssh/id_rsa.pub || ssh-keygen -t rsa -N "" -f ~/.ssh/id_rsa
nova keypair-add --pub-key ~/.ssh/id_rsa.pub testkey

Create a database in MySQL for magnum:

mysql -h 127.0.0.1 -u root -ppassword mysql <<EOF
CREATE DATABASE IF NOT EXISTS magnum DEFAULT CHARACTER SET utf8;
GRANT ALL PRIVILEGES ON magnum.* TO
    'root'@'%' IDENTIFIED BY 'password'
EOF

Clone and install magnum:

cd ~
git clone https://git.openstack.org/openstack/magnum
cd magnum
sudo pip install -e .

Configure magnum:

# create the magnum conf directory
sudo mkdir -p /etc/magnum

# generate sample config file and modify it as necessary
tox -egenconfig
sudo cp etc/magnum/magnum.conf.sample /etc/magnum/magnum.conf

# copy policy.json
sudo cp etc/magnum/policy.json /etc/magnum/policy.json

# copy api-paste.ini
sudo cp etc/magnum/api-paste.ini /etc/magnum/api-paste.ini

# enable debugging output
sudo sed -i "s/#debug\s*=.*/debug=true/" /etc/magnum/magnum.conf

# set RabbitMQ userid
sudo sed -i "s/#rabbit_userid\s*=.*/rabbit_userid=stackrabbit/" \
         /etc/magnum/magnum.conf

# set RabbitMQ password
sudo sed -i "s/#rabbit_password\s*=.*/rabbit_password=password/" \
         /etc/magnum/magnum.conf

# set SQLAlchemy connection string to connect to MySQL
sudo sed -i "s/#connection\s*=.*/connection=mysql:\/\/root:password@localhost\/magnum/" \
         /etc/magnum/magnum.conf

# set admin Identity API endpoint
sudo sed -i "s/#identity_uri\s*=.*/identity_uri=http:\/\/127.0.0.1:35357/" \
         /etc/magnum/magnum.conf

# set public Identity API endpoint
sudo sed -i "s/#auth_uri\s*=.*/auth_uri=http:\/\/127.0.0.1:5000\/v2.0/" \
         /etc/magnum/magnum.conf

# set trustee domain id
sudo sed -i "s/#trustee_domain_name\s*=.*/trustee_domain_name=magnum/" \
         /etc/magnum/magnum.conf

# set trustee domain admin id
sudo sed -i "s/#trustee_domain_admin_name\s*=.*/trustee_domain_admin_name=trustee_domain_admin/" \
         /etc/magnum/magnum.conf

# set trustee domain admin password
sudo sed -i "s/#trustee_domain_admin_password\s*=.*/trustee_domain_admin_password=password/" \
         /etc/magnum/magnum.conf

# set correct region name to clients
sudo sed -i "s/#region_name\s*=.*/region_name=RegionOne/" \
         /etc/magnum/magnum.conf

# set oslo messaging notifications driver (if using ceilometer)
sudo sed -i "s/#driver\s*=.*/driver=messaging/" \
         /etc/magnum/magnum.conf

Clone and install the magnum client:

cd ~
git clone https://git.openstack.org/openstack/python-magnumclient
cd python-magnumclient
sudo pip install -e .

Configure the database for use with magnum. Please note that DB migration does not work for SQLite backend. The SQLite database does not have any support for the ALTER statement needed by relational schema based migration tools. Hence DB Migration will not work for SQLite backend:

magnum-db-manage upgrade

Configure the keystone endpoint:

openstack service create --name=magnum \
                          --description="Container Infrastructure Management Service" \
                          container-infra
openstack endpoint create --region=RegionOne \
                          container-infra public http://127.0.0.1:9511/v1
openstack endpoint create --region=RegionOne \
                          container-infra internal http://127.0.0.1:9511/v1
openstack endpoint create --region=RegionOne \
                          container-infra admin http://127.0.0.1:9511/v1

Start the API service in a new screen:

magnum-api

Start the conductor service in a new screen:

magnum-conductor

Magnum should now be up and running!

Further details on utilizing magnum and deploying containers can be found in the guide Developer Quick-Start.

Previous topic

Developer Quick-Start

Next topic

Cluster Type Definition

This Page

Navigation

© Copyright 2013, OpenStack Foundation. Created using Sphinx 1.2.3.