Share migration¶

Use cases¶

As an administrator, you may want to migrate your share from one storage pool to another for several reasons. Examples include:

• Maintenance or evacuation
  • Evacuate a back end for hardware or software upgrades
  • Evacuate a back end experiencing failures
  • Evacuate a back end which is tagged end-of-life
• Optimization
  • Defragment back ends to empty and be taken offline to conserve power
  • Rebalance back ends to maximize available performance
  • Move data and compute closer together to reduce network utilization and decrease latency or increase bandwidth
• Moving shares
  • Migrate from old hardware generation to a newer generation
  • Migrate from one vendor to another

Migration workflows¶

Moving shares across different storage pools is generally expected to be a disruptive operation that disconnects existing clients when the source ceases to exist. For this reason, share migration is implemented in a 2-phase approach that allows the administrator to control the timing of the disruption. The first phase performs data copy while users retain access to the share. When copying is complete, the second phase may be triggered to perform a switchover that may include a last sync and deleting the source, generally requiring users to reconnect to continue accessing the share.

In order to migrate a share, one of two possible mechanisms may be employed, which provide different capabilities and affect how the disruption occurs with regards to user access during data copy phase and disconnection during switchover phase. Those two mechanisms are:

• Driver-assisted migration: This mechanism is intended to make use of driver optimizations to migrate shares between pools of the same storage vendor. This mechanism allows migrating shares nondisruptively while the source remains writable, preserving all filesystem metadata and snapshots. The migration workload is performed in the storage back end.
• Host-assisted migration: This mechanism is intended to migrate shares in an agnostic manner between two different pools, regardless of storage vendor. The implementation for this mechanism does not offer the same properties found in driver-assisted migration. In host-assisted migration, the source remains readable, snapshots must be deleted prior to starting the migration, filesystem metadata may be lost, and the clients will get disconnected by the end of migration. The migration workload is performed by the Data Service, which is a dedicated manila service for intensive data operations.

When starting a migration, driver-assisted migration is attempted first. If the shared file system service detects it is not possible to perform the driver-assisted migration, it proceeds to attempt host-assisted migration.

Using the migration APIs¶

The commands to interact with the share migration API are:

• migration_start: starts a migration while retaining access to the share. Migration is paused and waits for migration_complete invocation when it has copied all data and is ready to take down the source share.

  $ manila migration-start share_1 ubuntu@generic2#GENERIC2 --writable False --preserve-snapshots False --preserve-metadata False --nondisruptive False
  

  Note

  This command has no output.

• migration_complete: completes a migration, removing the source share and setting the destination share instance to available.

  $ manila migration-complete share_1
  

  Note

  This command has no output.

• migration_get_progress: obtains migration progress information of a share.

  $ manila migration-get-progress share_1
  
  +----------------+--------------------------+
  | Property       | Value                    |
  +----------------+--------------------------+
  | task_state     | data_copying_in_progress |
  | total_progress | 37                       |
  +----------------+--------------------------+
  

• migration_cancel: cancels an in-progress migration of a share.

  $ manila migration-cancel share_1
  

  Note

  This command has no output.

Configuration¶

For share migration to work in the cloud, there are several configuration requirements that need to be met:

For driver-assisted migration: it is necessary that the configuration of all back end stanzas is present in the file manila.conf of all manila-share nodes. Also, network connectivity between the nodes running manila-share service and their respective storage back ends is required.

For host-assisted migration: it is necessary that the Data Service (manila-data) is installed and configured in a node connected to the cloud’s administrator network. The drivers pertaining to the source back end and destination back end involved in the migration should be able to provide shares that can be accessed from the administrator network. This can easily be accomplished if the driver supports admin_only export locations, else it is up to the administrator to set up means of connectivity.

In order for the Data Service to mount the source and destination instances, it must use manila share access APIs to grant access to mount the instances. The access rule type varies according to the share protocol, so there are a few config options to set the access value for each type:

• data_node_access_ip: For IP-based access type, provide the value of the IP of the Data Service node in the administrator network. For NFS shares, drivers should always add rules with the “no_root_squash” property.
• data_node_access_cert: For certificate-based access type, provide the value of the certificate name that grants access to the Data Service.
• data_node_access_admin_user: For user-based access type, provide the value of a username that grants access and administrator privileges to the files in the share.
• data_node_mount_options: Provide the value of a mapping of protocol name to respective mount options. The Data Service makes use of mount command templates that by default have a dedicated field to inserting mount options parameter. The default value for this config option already includes the username and password parameters for CIFS shares and NFS v3 enforcing parameter for NFS shares.
• mount_tmp_location: Provide the value of a string representing the path where the share instances used in migration should be temporarily mounted. The default value is /tmp/.
• check_hash: This boolean config option value determines whether the hash of all files copied in migration should be validated. Setting this option increases the time it takes to migrate files, and is recommended for ultra-dependable systems. It defaults to disabled.

The configuration options above are respective to the Data Service only and should be defined the DEFAULT group of the manila.conf configuration file. Also, the Data Service node must have all the protocol-related libraries pre-installed to be able to run the mount commands for each protocol.

You may need to change some driver-specific configuration options from their default value to work with specific drivers. If so, they must be set under the driver configuration stanza in manila.conf. See a detailed description for each one below:

• migration_ignore_files: Provide value as a list containing the names of files or folders to be ignored during migration for a specific driver. The default value is a list containing only lost+found folder.

• share_mount_template: Provide a string that defines the template for the mount command for a specific driver. The template should contain the following entries to be formatted by the code:

  • proto: The share protocol. Automatically formatted by the Data Service.
  • options: The mount options to be formatted by the Data Service according to the data_node_mount_options config option.
  • export: The export path of the share. Automatically formatted by the Data Service with the share’s admin_only export location.
  • path: The path to mount the share. Automatically formatted by the Data Serivce according to the mount_tmp_location config option.

  The default value for this config option is:

  mount -vt %(proto)s %(options)s %(export)s %(path)s.
  

• share_unmount_template: Provide the value of a string that defines the template for the unmount command for a specific driver. The template should contain the path of where the shares are mounted, according to the mount_tmp_location config option, to be formatted automatically by the Data Service. The default value for this config option is:

  umount -v %(path)s
  

• protocol_access_mapping: Provide the value of a mapping of access rule type to protocols supported. The default value specifies IP and user based access types mapped to NFS and CIFS respectively, which are the combinations supported by manila. If a certain driver uses a different protocol for IP or user access types, or is not included in the default mapping, it should be specified in this configuration option.

Other remarks¶

• There is no need to manually add any of the previously existing access rules after a migration is complete, they will be persisted on the destination after the migration.
• Once migration of a share has started, the user will see the status migrating and it will block other share actions, such as adding or removing access rules, creating or deleting snapshots, resizing, among others.
• The destination share instance export locations, although it may exist from the beginning of a host-assisted migration, are not visible nor accessible as access rules cannot be added.
• During a host-assisted migration, an access rule granting access to the Data Service will be added and displayed by querying the access-list API. This access rule should not be tampered with, it will otherwise cause migration to fail.
• Resources allocated are cleaned up automatically when a migration fails, except if this failure occurs during the 2nd phase of a driver-assisted migration. Each step in migration is saved to the field task_state present in the Share model. If for any reason the state is not set to migration_error during a failure, it will need to be reset using the reset-task-state API.
• It is advised that the node running the Data Service is well secured, since it will be mounting shares with highest privileges, temporarily exposing user data to whoever has access to this node.
• The two mechanisms of migration are affected differently by service restarts:
  • If performing a host-assisted migration, all services may be restarted except for the manila-data service when performing the copy (the task_state field value starts with data_copying_). In other steps of the host-assisted migration, both the source and destination manila-share services should not be restarted.
  • If performing a driver-assisted migration, the migration is affected minimally by driver restarts if the task_state is migration_driver_in_progress, while the copy is being done in the back end. Otherwise, the source and destination manila-share services should not be restarted.