[host]
# Driver that hostmonitor uses for monitoring hosts.
monitoring_driver = default
# Monitoring interval(in seconds) of node status.
monitoring_interval = 60
# Do not check whether the host is completely down.
# Possible values:
# * True: Do not check whether the host is completely down.
# * False: Do check whether the host is completely down.
# If ipmi RA is not set in pacemaker, this value should be set True.
disable_ipmi_check = False
# Timeout value(in seconds) of the ipmitool command.
ipmi_timeout = 5
# Number of ipmitool command retries.
ipmi_retry_max = 3
# Retry interval(in seconds) of the ipmitool command.
ipmi_retry_interval = 10
# Only monitor pacemaker-remotes, ignore the status of full cluster
# members.
restrict_to_remotes = False
# Standby time(in seconds) until activate STONITH.
stonith_wait = 30
# Timeout value(in seconds) of the tcpdump command when monitors
# the corosync communication.
tcpdump_timeout = 5
# The name of interface that corosync is using for mutual communication
# between hosts.
# If there are multiple interfaces, specify them in comma-separated
# like 'enp0s3,enp0s8'.
# The number of interfaces you specify must be equal to the number of
# corosync_multicast_ports values and must be in correct order with
# relevant ports in corosync_multicast_ports.
corosync_multicast_interfaces = enp0s3,enp0s8
# The port numbers that corosync is using for mutual communication
# between hosts.
# If there are multiple port numbers, specify them in comma-separated
# like '5405,5406'.
# The number of port numbers you specify must be equal to the number of
# corosync_multicast_interfaces values and must be in correct order with
# relevant interfaces in corosync_multicast_interfaces.
corosync_multicast_ports = 5405,5406
