Sample Configuration File

The following is a sample ironic-neutron-agent configuration for adaptation and use. For a detailed overview of all available configuration options, refer to Configuration Options.

The sample configuration can also be viewed in file form.

Important

The sample configuration file is auto-generated from networking-baremetal when this documentation is built. You must ensure your version of networking-baremetal matches the version of this documentation.

[DEFAULT]

#
# From oslo.log
#

# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false

# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, log-date-format). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>

# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S

# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>

# (Optional) The base directory used for relative log_file  paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>

# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
#watch_log_file = false

# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
#use_syslog = false

# Enable journald for logging. If running in a systemd environment you may wish
# to enable journal support. Doing so will use the journal native protocol
# which includes structured metadata in addition to log messages.This option is
# ignored if log_config_append is set. (boolean value)
#use_journal = false

# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER

# Use JSON formatting for logging. This option is ignored if log_config_append
# is set. (boolean value)
#use_json = false

# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false

# Log output to Windows Event Log. (boolean value)
#use_eventlog = false

# The amount of time before the log files are rotated. This option is ignored
# unless log_rotation_type is setto "interval". (integer value)
#log_rotate_interval = 1

# Rotation interval type. The time of the last file change (or the time when
# the service was started) is used when scheduling the next rotation. (string
# value)
# Possible values:
# Seconds - <No description provided>
# Minutes - <No description provided>
# Hours - <No description provided>
# Days - <No description provided>
# Weekday - <No description provided>
# Midnight - <No description provided>
#log_rotate_interval_type = days

# Maximum number of rotated log files. (integer value)
#max_logfile_count = 30

# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
# not set to "size". (integer value)
#max_logfile_size_mb = 200

# Log rotation type. (string value)
# Possible values:
# interval - Rotate logs at predefined time intervals.
# size - Rotate logs once they reach a predefined size.
# none - Do not rotate log files.
#log_rotation_type = none

# Format string to use for log messages with context. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

# Format string to use for log messages when context is undefined. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

# Additional data to append to log message when logging level for the message
# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

# Prefix each line of exception output with this format. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
# (string value)
#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO

# Enables or disables publication of error events. (boolean value)
#publish_errors = false

# The format for an instance that is passed with the log message. (string
# value)
#instance_format = "[instance: %(uuid)s] "

# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "

# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0

# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0

# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
# or empty string. Logs with level greater or equal to rate_limit_except_level
# are not filtered. An empty string means that all levels are filtered. (string
# value)
#rate_limit_except_level = CRITICAL

# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false


[agent]

#
# From ironic-neutron-agent
#

# Seconds between nodes reporting state to server; should be less than
# agent_down_time, best if it is half or less than agent_down_time. (floating
# point value)
#report_interval = 30

# Log agent heartbeats (boolean value)
#log_agent_heartbeats = false


[ironic]

#
# From ironic-client
#

# DEPRECATED: Method to use for authentication: noauth or keystone. (string
# value)
# Possible values:
# keystone - <No description provided>
# noauth - <No description provided>
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: This option is no longer used, please use the [ironic]/auth_type
# option instead.
#auth_strategy = keystone

# The default service_type for endpoint URL discovery. (string value)
#service_type = <None>

# The default service_name for endpoint URL discovery. (string value)
#service_name = <None>

# List of interfaces, in order of preference, for endpoint URL. (list value)
#valid_interfaces = <None>

# The default region_name for endpoint URL discovery. (string value)
# Deprecated group/name - [ironic]/os_region
#region_name = <None>

# Always use this endpoint URL for requests for this client. NOTE: The
# unversioned endpoint should be specified here; to request a particular API
# version, use the `version`, `min-version`, and/or `max-version` options.
# (string value)
# Deprecated group/name - [ironic]/ironic_url
#endpoint_override = <None>

# Minimum Major API version within a given Major API version for endpoint URL
# discovery. Mutually exclusive with min_version and max_version (string value)
#version = <None>

# The minimum major version of a given API, intended to be used as the lower
# bound of a range with max_version. Mutually exclusive with version. If
# min_version is given with no max_version it is as if max version is "latest".
# (string value)
#min_version = <None>

# The maximum major version of a given API, intended to be used as the upper
# bound of a range with min_version. Mutually exclusive with version. (string
# value)
#max_version = <None>

# The maximum number of retries that should be attempted for connection errors.
# (integer value)
#connect_retries = <None>

# Delay (in seconds) between two retries for connection errors. If not set,
# exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is
# used. (floating point value)
#connect_retry_delay = <None>

# The maximum number of retries that should be attempted for retriable HTTP
# status codes. (integer value)
# Deprecated group/name - [ironic]/max_retries
#status_code_retries = <None>

# Delay (in seconds) between two retries for retriable status codes. If not
# set, exponential retry starting with 0.5 seconds up to a maximum of 60
# seconds is used. (floating point value)
# Deprecated group/name - [ironic]/retry_interval
#status_code_retry_delay = <None>

# DEPRECATED: The default interface for endpoint URL discovery. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Using valid-interfaces is preferrable because it is capable of
# accepting a list of possible interfaces.
#interface = <None>

# PEM encoded Certificate Authority to use when verifying HTTPs connections.
# (string value)
#cafile = <None>

# PEM encoded client certificate cert file (string value)
#certfile = <None>

# PEM encoded client certificate key file (string value)
#keyfile = <None>

# Verify HTTPS connections. (boolean value)
#insecure = false

# Timeout value for http requests (integer value)
#timeout = <None>

# Collect per-API call timing information. (boolean value)
#collect_timing = false

# Log requests to multiple loggers. (boolean value)
#split_loggers = false

# Authentication URL (string value)
#auth_url = <None>

# Scope for system operations (string value)
#system_scope = <None>

# Domain ID to scope to (string value)
#domain_id = <None>

# Domain name to scope to (string value)
#domain_name = <None>

# Project ID to scope to (string value)
#project_id = <None>

# Project name to scope to (string value)
#project_name = <None>

# Domain ID containing project (string value)
#project_domain_id = <None>

# Domain name containing project (string value)
#project_domain_name = <None>

# Trust ID (string value)
#trust_id = <None>

# User ID (string value)
#user_id = <None>

# Username (string value)
# Deprecated group/name - [ironic]/user_name
#username = <None>

# User's domain id (string value)
#user_domain_id = <None>

# User's domain name (string value)
#user_domain_name = <None>

# User's password (string value)
#password = <None>