Testing¶
Dynamic routing enables advertisement of self-service network prefixes to physical network devices that support dynamic routing protocol such as routers. Neutron dynamic routing project that consists of a service plugin-in and agent can advertise neutron private network to outside of OpenStack. This document will describe how to test the Dynamic Routing functionalities, introduce what the environment architecture is for dynamic routing test and show how to setup dynamic routing environment using Devstack.
Environment Architecture¶
Using the following example architecture as a test environment to deploy neutron-dynamic-routing in your environment. The example architecture will deploy an all-in-one OpenStack and pick up an Ubuntu VM running Quagga as a router outside of OpenStack . See following:
+--------------+
10.156.18.20 | |
+----------------------------------| Quagga |
| BGP Peering Session | Router |
| | 172.24.4.3 |
| +--------------+
| |
|10.156.18.21 | External Network(172.24.4.0/24)
-------------------------------------------------------------------------------------------------- |ETH0 |br-ex
+---------------------------------------+
| | | |
| | | |
| | +-------+ |
| | |172.24.4.1 |
| +------------+ +-------+ |
| | | |Router | |
| | Dr-Agent | | | |
| | | +-------+ |
| +------------+ | |
| ---------------- |
| Tenant Network |
| (10.0.0.0/24) |
| |
+---------------------------------------+
All-In-One OpenStack Installation
Devstack Setup¶
Download devstack:
git clone http://git.openstack.org/openstack-dev/devstack.git
Enable neutron-dynamic-routing:
[[local|localrc]] enable_plugin neutron-dynamic-routing http://git.openstack.org/openstack/neutron-dynamic-routing
Run devstack:
./stack.sh
Quagga Configure¶
Quagga is a network routing software available in most GNU/Linux, Solaris, FreeBSD, and NetBSD. It provides the implementation of OSPF, RIP, BGP and IS-IS. This section shows you how to install Quagga and then configure it on Ubuntu Linux.
Install Quagga using apt-get:
$ sudo apt-get install quagga quagga-doc
Create an empty file (/etc/quagga/zebra.conf) and set permissions.
The Quagga files and configurations will be stored in /etc/quagga:
$ sudo touch /etc/quagga/zebra.conf $ sudo chown quagga.quagga /etc/quagga/zebra.conf $ sudo chmod 640 /etc/quagga/zebra.conf
Update quagga deamon file.
You can enable/disable the daemons routing in the /etc/quagga/daemons file. Update /etc/quagga/deamons to enable zebra and bgp:
zebra=yes bgpd=yes ospfd=no ospf6d=no ripd=no ripngd=no isisd=no
Update /etc/quagga/zebra.conf:
# Zebra configuration # name of the router hostname quagga_1 password zebra # log log file /var/log/quagga/zebra.log
Update /etc/quagga/bgpd.conf:
# set router-id to the network address we announce bgp router-id 10.156.18.20 # declare a router with local-as 1000 router bgp 1000 # expose neighbor network which dynamic routing agent is using neighbor 10.156.18.21 remote-as 12345 # treat neutron dynamic routing agent as a passive peer in case # quagga keeps making futile connection attempts neighbor 10.156.18.21 passive # log log file /var/log/quagga/bgpd.log debug bgp events debug bgp filters debug bgp fsm debug bgp keepalives debug bgp updates
Restart the Quagga:
$ sudo /etc/init.d/quagga restart
Service Test¶
As the dynamic routing is only supported by admin, source the devstack admin credentials:
$ source devstack/openrc admin admin
Verify the neutron dynamic routing agent is running.
$ neutron agent-list --agent-type 'BGP dynamic routing agent'
+--------------------+--------------------+--------------------+-------------------+-------+----------------+---------------------+
| id | agent_type | host | availability_zone | alive | admin_state_up | binary |
+--------------------+--------------------+--------------------+-------------------+-------+----------------+---------------------+
| 69ad386f-e055-4284 | BGP dynamic | yang-devstack- | | :-) | True | neutron-bgp-dragent |
| -8c8e-ef9bd540705c | routing agent | ubuntu-1604 | | | | |
+--------------------+--------------------+--------------------+-------------------+-------+----------------+---------------------+
Create an address scope.
The provider(external) and tenant networks must belong to the same address scope for the agent to advertise those tenant network prefixes.
$ neutron address-scope-create --shared public 4 Created a new address_scope: +------------+--------------------------------------+ | Field | Value | +------------+--------------------------------------+ | id | c02c358a-9d35-43ea-8313-986b3e4a91c0 | | ip_version | 4 | | name | public | | shared | True | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +------------+--------------------------------------+
Create subnet pools. The provider and tenant networks use different pools.
- Create the provider network pool.
$ neutron subnetpool-create --pool-prefix 172.24.4.0/24 \ --address-scope public provider Created a new subnetpool: +-------------------+--------------------------------------+ | Field | Value | +-------------------+--------------------------------------+ | address_scope_id | 238aaf8f-f91a-4538-b6b2-c0140111cf69 | | created_at | 2016-06-30T07:03:52 | | default_prefixlen | 8 | | default_quota | | | description | | | id | 8439bfee-e09c-40a9-a3ea-8cf7212b7ba9 | | ip_version | 4 | | is_default | False | | max_prefixlen | 32 | | min_prefixlen | 8 | | name | provider | | prefixes | 172.24.4.0/24 | | shared | False | | tenant_id | 21734c4383284cf9906b7fe8246bffb1 | | updated_at | 2016-06-30T07:03:52 | +-------------------+--------------------------------------+
- Create tenant network pool.
$ neutron subnetpool-create --pool-prefix 10.0.0.0/16 \ --address-scope public --shared selfservice Created a new subnetpool: +-------------------+--------------------------------------+ | Field | Value | +-------------------+--------------------------------------+ | address_scope_id | c02c358a-9d35-43ea-8313-986b3e4a91c0 | | created_at | 2016-06-30T07:08:30 | | default_prefixlen | 8 | | default_quota | | | description | | | id | c7e9737a-cfd3-45b5-a861-d1cee1135a92 | | ip_version | 4 | | is_default | False | | max_prefixlen | 32 | | min_prefixlen | 8 | | name | selfservice | | prefixes | 10.0.0.0/16 | | shared | True | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | | updated_at | 2016-06-30T07:08:30 | +-------------------+--------------------------------------+
Create the provider and tenant networks.
- Create the provider network.
$ neutron net-create --router:external True --provider:physical_network provider \ --provider:network_type flat provider Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | id | 68ec148c-181f-4656-8334-8f4eb148689d | | name | provider | | provider:network_type | flat | | provider:physical_network | provider | | provider:segmentation_id | | | router:external | True | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +---------------------------+--------------------------------------+
- Create a subnet on the provider network using an IP address allocation from the provider subnet pool.
$ neutron subnet-create --name provider --subnetpool provider \ --prefixlen 24 provider Created a new subnet: +-------------------+------------------------------------------------+ | Field | Value | +-------------------+------------------------------------------------+ | allocation_pools | {"start": "172.24.4.2", "end": "172.24.4.254"} | | cidr | 172.24.4.0/24 | | created_at | 2016-03-17T23:17:16 | | description | | | dns_nameservers | | | enable_dhcp | True | | gateway_ip | 172.24.4.1 | | host_routes | | | id | 8ed65d41-2b2a-4f3a-9f92-45adb266e01a | | ip_version | 4 | | ipv6_address_mode | | | ipv6_ra_mode | | | name | provider | | network_id | 68ec148c-181f-4656-8334-8f4eb148689d | | subnetpool_id | 3771c0e7-7096-46d3-a3bd-699c58e70259 | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | | updated_at | 2016-03-17T23:17:16 | +-------------------+------------------------------------------------+
- Create the tenant network.
$ neutron net-create private Created a new network: +---------------------------+--------------------------------------+ | Field | Value | +---------------------------+--------------------------------------+ | admin_state_up | True | | id | 01da3e19-129f-4d26-b065-255ade0e5e2c | | name | private | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +---------------------------+--------------------------------------+
- Create a subnet on the tenant network using an IP address allocation from the private subnet pool.
$ neutron subnet-create --name selfservice --subnetpool private \ --prefixlen 24 private Created a new subnet: +-------------------+--------------------------------------------+ | Field | Value | +-------------------+--------------------------------------------+ | allocation_pools | {"start": "10.0.0.2", "end": "10.0.0.254"} | | cidr | 10.0.0.0/24 | | created_at | 2016-03-17T23:20:20 | | description | | | dns_nameservers | | | enable_dhcp | True | | gateway_ip | 10.0.0.1 | | host_routes | | | id | 8edd3dc2-df40-4d71-816e-a4586d61c809 | | ip_version | 4 | | ipv6_address_mode | | | ipv6_ra_mode | | | name | private | | network_id | 01da3e19-129f-4d26-b065-255ade0e5e2c | | subnetpool_id | c7e9737a-cfd3-45b5-a861-d1cee1135a92 | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | | updated_at | 2016-03-17T23:20:20 | +-------------------+--------------------------------------------+
Create and configure router
- Create a router.
$ neutron router-create router +-----------------------+--------------------------------------+ | Field | Value | +-----------------------+--------------------------------------+ | admin_state_up | True | | external_gateway_info | | | id | 49439b14-f6ee-420d-8c48-d3767fadcb3a | | name | router | | status | ACTIVE | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +-----------------------+--------------------------------------+
- Add the private subnet as an interface on the router.
$ neutron router-interface-add router selfservice Added interface 969a1d4b-7fa1-4346-9963-de06becab87a to router router.
- Add the provide network as a gateway on the router
$ neutron router-gateway-set router provider Set gateway for router router
- Verify router ports. Note: from this result, you can see what the advertised routes are.
$ neutron router-port-list router +--------------------------------------+------+-------------------+----------------------------------------------------+ | id | name | mac_address | fixed_ips | +--------------------------------------+------+-------------------+----------------------------------------------------+ | dc675aab-5a8b-462c-872e-2f791b6c1730 | | fa:16:3e:e5:a2:d2 | {"subnet_id": "1c6b725e- | | | | | 890e-4454-8842-7ff22ffa704b", "ip_address": | | | | | "10.0.0.1"} | | e15c701d-868f-4171-a282-e6a4567a8d83 | | fa:16:3e:28:86:4c | {"subnet_id": | | | | | "b442c453-7e4a-4568-9d70-1dde91a65fbb", | | | | | "ip_address": "172.24.4.2"} | +--------------------------------------+------+-------------------+----------------------------------------------------+
Create and configure the BGP speaker
The BGP speaker advertised the next-hop IP address for the tenant network prefix.
- Create the BGP speaker.
Replace LOCAL_AS with an appropriate local autonomous system number. The example configuration uses AS 12345.
$ neutron bgp-speaker-create --ip-version 4 \ --local-as LOCAL_AS bgp-speaker Created a new bgp_speaker: +-----------------------------------+--------------------------------------+ | Field | Value | +-----------------------------------+--------------------------------------+ | advertise_floating_ip_host_routes | True | | advertise_tenant_networks | True | | id | 5f227f14-4f46-4eca-9524-fc5a1eabc358 | | ip_version | 4 | | local_as | 12345 | | name | bgp-speaker | | networks | | | peers | | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +-----------------------------------+--------------------------------------+
- Associate the BGP speaker with the provider network.
A BGP speaker requires association with a provider network to determine eligible prefixes. After the association, the BGP speaker can advertise the tenant network prefixes with the corresponding router as the next-hop IP address.
$ neutron bgp-speaker-network-add bgp-speaker provider Added network provider to BGP speaker bgpspeaker.
- Verify the association of the provider network with the BGP speaker.
Checking the
networksattribute.$ neutron bgp-speaker-show bgpspeaker +-----------------------------------+--------------------------------------+ | Field | Value | +-----------------------------------+--------------------------------------+ | advertise_floating_ip_host_routes | True | | advertise_tenant_networks | True | | id | 5f227f14-4f46-4eca-9524-fc5a1eabc358 | | ip_version | 4 | | local_as | 12345 | | name | bgp-speaker | | networks | 68ec148c-181f-4656-8334-8f4eb148689d | | peers | | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +-----------------------------------+--------------------------------------+
- Verify the prefixes and next-hop ip addresses that the BGP speaker advertises.
$ neutron bgp-speaker-advertiseroute-list bgpspeaker +-------------+------------+ | destination | next_hop | +-------------+------------+ | 10.0.0.0/24 | 172.24.4.3 | +-------------+------------+
- Create a BGP peer.
Here the BGP peer is pointed to the quagga VM. Replace REMOTE_AS with an appropriate remote autonomous system number. The example configuration uses AS 12345 which triggers iBGP peering.
$ neutron bgp-peer-create --peer-ip 10.156.18.20 \ --remote-as REMOTE_AS bgp-peer Created a new bgp_peer: +-----------+--------------------------------------+ | Field | Value | +-----------+--------------------------------------+ | auth_type | none | | id | 35c89ca0-ac5a-4298-a815-0b073c2362e9 | | name | bgp-peer | | peer_ip | 10.156.18.20 | | remote_as | 12345 | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +-----------+--------------------------------------+
- Add a BGP peer to the BGP speaker.
$ neutron bgp-speaker-peer-add bgp-speaker bgp-peer Added BGP peer bgppeer to BGP speaker bgpspeaker.
- Verify the association of the BGP peer with the BGP speaker.
Checking the
peersattribute.$ neutron bgp-speaker-show bgp-speaker +-----------------------------------+--------------------------------------+ | Field | Value | +-----------------------------------+--------------------------------------+ | advertise_floating_ip_host_routes | True | | advertise_tenant_networks | True | | id | 5f227f14-4f46-4eca-9524-fc5a1eabc358 | | ip_version | 4 | | local_as | 12345 | | name | bgp-speaker | | networks | 68ec148c-181f-4656-8334-8f4eb148689d | | peers | 35c89ca0-ac5a-4298-a815-0b073c2362e9 | | tenant_id | b3ac05ef10bf441fbf4aa17f16ae1e6d | +-----------------------------------+--------------------------------------+
Schedule the BGP speaker to an agent.
- Schedule the BGP speaker to
BGP dynamic routing agent
BGP speakers require manual scheduling to an agent. BGP speakers only form peering sessions.
$ neutron bgp-speaker-network-add bgp-speaker provider Added network provider to BGP speaker bgpspeaker.
- Verify scheduling of the BGP speaker to the agent.
neutron bgp-dragent-list-hosting-speaker bgp-speaker +--------------------------------------+---------------------------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+---------------------------+----------------+-------+ | 69ad386f-e055-4284-8c8e-ef9bd540705c | yang-devstack-ubuntu-1604 | True | :-) | +--------------------------------------+---------------------------+----------------+-------+
- Schedule the BGP speaker to