Network components¶
Switches¶
Switches are Multi-Input Multi-Output (MIMO) devices that enable packets to travel from one node to another. Switches connect hosts that belong to the same layer-2 network. Switches enable forwarding of the packet received on one port (input) to another port (output) so that they reach the desired destination node. Switches operate at layer-2 in the networking model. They forward the traffic based on the destination Ethernet address in the packet header.
Routers¶
Routers are special devices that enable packets to travel from one layer-3 network to another. Routers enable communication between two nodes on different layer-3 networks that are not directly connected to each other. Routers operate at layer-3 in the networking model. They route the traffic based on the destination IP address in the packet header.
Firewalls¶
Firewalls are used to regulate traffic to and from a host or a network.
A firewall can be either a specialized device connecting two networks or
a software-based filtering mechanism implemented on an operating system.
Firewalls are used to restrict traffic to a host based on the rules
defined on the host. They can filter packets based on several criteria such as
source IP address, destination IP address, port numbers, connection state,
and so on. It is primarily used to protect the hosts from unauthorized access
and malicious attacks. Linux-based operating systems implement firewalls
through iptables.
Load balancers¶
Load balancers can be software-based or hardware-based devices that allow traffic to evenly be distributed across several servers. By distributing the traffic across multiple servers, it avoids overload of a single server thereby preventing a single point of failure in the product. This further improves the performance, network throughput, and response time of the servers. Load balancers are typically used in a 3-tier architecture. In this model, a load balancer receives a request from the front-end web server, which then forwards the request to one of the available back-end database servers for processing. The response from the database server is passed back to the web server for further processing.
Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.