DNS integration¶
This page serves as a guide for how to use the DNS integration functionality of the Networking service and its interaction with the Compute service.
The integration of the Networking service with an external DNSaaS (DNS-as-a-Service) is described in DNS integration with an external service.
Users can control the behavior of the Networking service in regards to DNS using two attributes associated with ports, networks, and floating IPs. The following table shows the attributes available for each one of these resources:
Resource |
dns_name |
dns_domain |
|---|---|---|
Ports |
Yes |
Yes |
Networks |
No |
Yes |
Floating IPs |
Yes |
Yes |
Note
The DNS Integration extension enables all the attribute and resource
combinations shown in the previous table, except for dns_domain for
ports, which requires the dns_domain for ports extension.
Note
Since the DNS Integration extension is a subset of
dns_domain for ports, if dns_domain functionality for ports is
required, only the latter extension has to be configured.
Note
When the dns_domain for ports extension is configured, DNS
Integration is also included when the Neutron server responds to a request
to list the active API extensions. This preserves backwards API
compatibility.
The Networking service internal DNS resolution¶
The Networking service enables users to control the name assigned to ports by the internal DNS. To enable this functionality, do the following:
Edit the
/etc/neutron/neutron.conffile and assign a value different toopenstacklocal(its default value) to thedns_domainparameter in the[default]section. As an example:dns_domain = example.org.
Add
dns(for theDNS Integrationextension) ordns_domain_ports(for thedns_domain for portsextension) toextension_driversin the[ml2]section of/etc/neutron/plugins/ml2/ml2_conf.ini. The following is an example:[ml2] extension_drivers = port_security,dns_domain_ports
After re-starting the neutron-server, users will be able to assign a
dns_name attribute to their ports.
Note
The enablement of this functionality is prerequisite for the enablement of the Networking service integration with an external DNS service, which is described in detail in DNS integration with an external service.
The following illustrates the creation of a port with my-port
in its dns_name attribute.
Note
The name assigned to the port by the Networking service internal DNS is now
visible in the response in the dns_assignment attribute.
$ openstack port create --network my-net --dns-name my-port test
+-----------------------+-------------------------------------------------------------------------------+
| Field | Value |
+-----------------------+-------------------------------------------------------------------------------+
| admin_state_up | UP |
| allowed_address_pairs | |
| binding_host_id | |
| binding_profile | |
| binding_vif_details | |
| binding_vif_type | unbound |
| binding_vnic_type | normal |
| created_at | 2016-02-05T21:35:04Z |
| data_plane_status | None |
| description | |
| device_id | |
| device_owner | |
| dns_assignment | fqdn='my-port.example.org.', hostname='my-port', ip_address='192.0.2.67' |
| dns_domain | None |
| dns_name | my-port |
| extra_dhcp_opts | |
| fixed_ips | ip_address='192.0.2.67', subnet_id='6141b474-56cd-430f-b731-71660bb79b79' |
| id | fb3c10f4-017e-420c-9be1-8f8c557ae21f |
| mac_address | fa:16:3e:aa:9b:e1 |
| name | test |
| network_id | bf2802a0-99a0-4e8c-91e4-107d03f158ea |
| port_security_enabled | True |
| project_id | d5660cb1e6934612a01b4fb2fb630725 |
| qos_policy_id | None |
| revision_number | 1 |
| security_group_ids | 1f0ddd73-7e3c-48bd-a64c-7ded4fe0e635 |
| status | DOWN |
| tags | |
| trunk_details | None |
| updated_at | 2016-02-05T21:35:04Z |
+-----------------------+-------------------------------------------------------------------------------+
When this functionality is enabled, it is leveraged by the Compute service when
creating instances. When allocating ports for an instance during boot, the
Compute service populates the dns_name attributes of these ports with
the hostname attribute of the instance, which is a DNS sanitized version of
its display name. As a consequence, at the end of the boot process, the
allocated ports will be known in the dnsmasq associated to their networks by
their instance hostname.
The following is an example of an instance creation, showing how its
hostname populates the dns_name attribute of the allocated port:
$ openstack server create --image cirros --flavor 42 \
--nic net-id=37aaff3a-6047-45ac-bf4f-a825e56fd2b3 my_vm
+--------------------------------------+----------------------------------------------------------------+
| Field | Value |
+--------------------------------------+----------------------------------------------------------------+
| OS-DCF:diskConfig | MANUAL |
| OS-EXT-AZ:availability_zone | |
| OS-EXT-STS:power_state | 0 |
| OS-EXT-STS:task_state | scheduling |
| OS-EXT-STS:vm_state | building |
| OS-SRV-USG:launched_at | - |
| OS-SRV-USG:terminated_at | - |
| accessIPv4 | |
| accessIPv6 | |
| adminPass | dB45Zvo8Jpfe |
| config_drive | |
| created | 2016-02-05T21:35:04Z |
| flavor | m1.nano (42) |
| hostId | |
| id | 66c13cb4-3002-4ab3-8400-7efc2659c363 |
| image | cirros-0.3.5-x86_64-uec(b9d981eb-d21c-4ce2-9dbc-dd38f3d9015f) |
| key_name | - |
| locked | False |
| metadata | {} |
| name | my_vm |
| os-extended-volumes:volumes_attached | [] |
| progress | 0 |
| security_groups | default |
| status | BUILD |
| tenant_id | d5660cb1e6934612a01b4fb2fb630725 |
| updated | 2016-02-05T21:35:04Z |
| user_id | 8bb6e578cba24e7db9d3810633124525 |
+--------------------------------------+----------------------------------------------------------------+
$ openstack port list --device-id 66c13cb4-3002-4ab3-8400-7efc2659c363
+--------------------------------------+------+-------------------+---------------------------------------------------------------------------------------+--------+
| ID | Name | MAC Address | Fixed IP Addresses | Status |
+--------------------------------------+------+-------------------+---------------------------------------------------------------------------------------+--------+
| b3ecc464-1263-44a7-8c38-2d8a52751773 | | fa:16:3e:a8:ce:b8 | ip_address='203.0.113.8', subnet_id='277eca5d-9869-474b-960e-6da5951d09f7' | ACTIVE |
| | | | ip_address='2001:db8:10::8', subnet_id='eab47748-3f0a-4775-a09f-b0c24bb64bc4' | |
+--------------------------------------+------+-------------------+---------------------------------------------------------------------------------------+--------+
$ openstack port show b3ecc464-1263-44a7-8c38-2d8a52751773
+-----------------------+------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-----------------------+------------------------------------------------------------------------------------------------------------+
| admin_state_up | UP |
| allowed_address_pairs | |
| binding_host_id | vultr.guest |
| binding_profile | |
| binding_vif_details | datapath_type='system', ovs_hybrid_plug='True', port_filter='True' |
| binding_vif_type | ovs |
| binding_vnic_type | normal |
| created_at | 2016-02-05T21:35:04Z |
| data_plane_status | None |
| description | |
| device_id | 66c13cb4-3002-4ab3-8400-7efc2659c363 |
| device_owner | compute:None |
| dns_assignment | fqdn='my-vm.example.org.', hostname='my-vm', ip_address='203.0.113.8' |
| | fqdn='my-vm.example.org.', hostname='my-vm', ip_address='2001:db8:10::8' |
| dns_domain | example.org. |
| dns_name | my-vm |
| extra_dhcp_opts | |
| fixed_ips | ip_address='203.0.113.8', subnet_id='277eca5d-9869-474b-960e-6da5951d09f7' |
| | ip_address='2001:db8:10::8', subnet_id='eab47748-3f0a-4775-a09f-b0c24bb64bc4' |
| id | b3ecc464-1263-44a7-8c38-2d8a52751773 |
| mac_address | fa:16:3e:a8:ce:b8 |
| name | |
| network_id | 37aaff3a-6047-45ac-bf4f-a825e56fd2b3 |
| port_security_enabled | True |
| project_id | d5660cb1e6934612a01b4fb2fb630725 |
| qos_policy_id | None |
| revision_number | 1 |
| security_group_ids | 1f0ddd73-7e3c-48bd-a64c-7ded4fe0e635 |
| status | ACTIVE |
| tags | |
| trunk_details | None |
| updated_at | 2016-02-05T21:35:04Z |
+-----------------------+------------------------------------------------------------------------------------------------------------+
In the above example notice that:
The name given to the instance by the user,
my_vm, is sanitized by the Compute service and becomesmy-vmas the port’sdns_name.The port’s
dns_assignmentattribute shows that its FQDN ismy-vm.example.org.in the Networking service internal DNS, which is the result of concatenating the port’sdns_namewith the value configured in thedns_domainparameter inneutron.conf, as explained previously.The
dns_assignmentattribute also shows that the port’shostnamein the Networking service internal DNS ismy-vm.Instead of having the Compute service create the port for the instance, the user might have created it and assigned a value to its
dns_nameattribute. In this case, the value assigned to thedns_nameattribute must be equal to the value that Compute service will assign to the instance’shostname, in this examplemy-vm. Otherwise, the instance boot will fail.
Note
When the Networking service integration with an external DNS service is
enabled, a port’s FQDN in the dns_assignment attribute will not be
calculated as described above in some well defined cases. For a description
of these cases please see The port’s dns_assignment attribute with use case 3.
