Availability Zones

Note

This section provides deployment and admin-user usage information about the availability zone feature. For end-user information about availability zones, refer to the user guide.

Availability Zones are an end-user visible logical abstraction for partitioning a cloud without knowing the physical infrastructure. They can be used to partition a cloud on arbitrary factors, such as location (country, datacenter, rack), network layout and/or power source.

Note

Availability Zones should not be assumed to map to fault domains and provide no intrinsic HA benefit by themselves.

Availability zones are not modeled in the database; rather, they are defined by attaching specific metadata information to an aggregate The addition of this specific metadata to an aggregate makes the aggregate visible from an end-user perspective and consequently allows users to schedule instances to a specific set of hosts, the ones belonging to the aggregate. There are a few additional differences to note when comparing availability zones and host aggregates:

  • A host can be part of multiple aggregates but it can only be in one availability zone.

  • By default a host is part of a default availability zone even if it doesn’t belong to an aggregate. The name of this default availability zone can be configured using default_availability_zone config option.

    Warning

    The use of the default availability zone name in requests can be very error-prone. Since the user can see the list of availability zones, they have no way to know whether the default availability zone name (currently nova) is provided because a host belongs to an aggregate whose AZ metadata key is set to nova, or because there is at least one host not belonging to any aggregate. Consequently, it is highly recommended for users to never ever ask for booting an instance by specifying an explicit AZ named nova and for operators to never set the AZ metadata for an aggregate to nova. This can result is some problems due to the fact that the instance AZ information is explicitly attached to nova which could break further move operations when either the host is moved to another aggregate or when the user would like to migrate the instance.

    Note

    Availability zone names must NOT contain : since it is used by admin users to specify hosts where instances are launched in server creation. See Using availability zones to select hosts for more information.

In addition, other services, such as the networking service and the block storage service, also provide an availability zone feature. However, the implementation of these features differs vastly between these different services. Consult the documentation for these other services for more information on their implementation of this feature.

Availability Zones with Placement

In order to use placement to honor availability zone requests, there must be placement aggregates that match the membership and UUID of nova host aggregates that you assign as availability zones. An aggregate metadata key is used to controls this function. As of 28.0.0 (Bobcat), this is the only way to schedule instances to availability-zones.

$ openstack --os-compute-api-version=2.53 aggregate create myaz
+-------------------+--------------------------------------+
| Field             | Value                                |
+-------------------+--------------------------------------+
| availability_zone | None                                 |
| created_at        | 2018-03-29T16:22:23.175884           |
| deleted           | False                                |
| deleted_at        | None                                 |
| id                | 4                                    |
| name              | myaz                                 |
| updated_at        | None                                 |
| uuid              | 019e2189-31b3-49e1-aff2-b220ebd91c24 |
+-------------------+--------------------------------------+

$ openstack --os-compute-api-version=2.53 aggregate add host myaz node1
+-------------------+--------------------------------------+
| Field             | Value                                |
+-------------------+--------------------------------------+
| availability_zone | None                                 |
| created_at        | 2018-03-29T16:22:23.175884           |
| deleted           | False                                |
| deleted_at        | None                                 |
| hosts             | [u'node1']                           |
| id                | 4                                    |
| name              | myagg                                |
| updated_at        | None                                 |
| uuid              | 019e2189-31b3-49e1-aff2-b220ebd91c24 |
+-------------------+--------------------------------------+

$ openstack aggregate set --property availability_zone=az002 myaz

Implications for moving servers

There are several ways to move a server to another host: evacuate, resize, cold migrate, live migrate, and unshelve. Move operations typically go through the scheduler to pick the target host.

Prior to API microversion 2.68, using older openstackclient (pre-5.5.0) and novaclient, it was possible to specify a target host and the request forces the server to that host by bypassing the scheduler. Only evacuate and live migrate can forcefully bypass the scheduler and move a server to specified host and even then it is highly recommended to not force and bypass a scheduler.

  • live migrate with force host (works with older openstackclients(pre-5.5.0):

$ openstack server migrate --live <host> <server>

  • live migrate without forcing:

$ openstack server migrate --live-migration --host <host> <server>

While support for ‘server evacuate’ command to openstackclient was added in 5.5.3 and there it never exposed ability to force an evacuation, but it was previously possible with novaclient.

  • evacuate with force host:

$ nova evacuate --force <server> <host>

  • evacuate without forcing using novaclient:

$ nova evacuate

  • evacuate without forcing using openstackclient:

$ openstack server evacuate --host <host> <server>

With respect to availability zones, a server is restricted to a zone if:

  1. The server was created in a specific zone with the POST /servers request containing the availability_zone parameter.

  2. If the server create request did not contain the availability_zone parameter but the API service is configured for default_schedule_zone then by default the server will be scheduled to that zone.

  3. The shelved offloaded server was unshelved by specifying the availability_zone with the POST /servers/{server_id}/action request using microversion 2.77 or greater.

  4. cinder.cross_az_attach is False, default_schedule_zone is None, the server is created without an explicit zone but with pre-existing volume block device mappings. In that case the server will be created in the same zone as the volume(s) if the volume zone is not the same as default_availability_zone. See Resource affinity for details.

If the server was not created in a specific zone then it is free to be moved to other zones.

Resource affinity

The cinder.cross_az_attach configuration option can be used to restrict servers and the volumes attached to servers to the same availability zone.

A typical use case for setting cross_az_attach=False is to enforce compute and block storage affinity, for example in a High Performance Compute cluster.

By default cross_az_attach is True meaning that the volumes attached to a server can be in a different availability zone than the server. If set to False, then when creating a server with pre-existing volumes or attaching a volume to a server, the server and volume zone must match otherwise the request will fail. In addition, if the nova-compute service creates the volumes to attach to the server during server create, it will request that those volumes are created in the same availability zone as the server, which must exist in the block storage (cinder) service.

As noted in the Implications for moving servers section, forcefully moving a server to another zone could also break affinity with attached volumes.

Note

cross_az_attach=False is not widely used nor tested extensively and thus suffers from some known issues:

Using availability zones to select hosts

We can combine availability zones with a specific host and/or node to select where an instance is launched. For example:

$ openstack server create --availability-zone ZONE:HOST:NODE ... SERVER

Note

It is possible to use ZONE, ZONE:HOST, and ZONE::NODE.

Note

This is an admin-only operation by default, though you can modify this behavior using the os_compute_api:servers:create:forced_host rule in policy.yaml.

However, as discussed previously, when launching instances in this manner the scheduler filters are not run. For this reason, this behavior is considered legacy behavior and, starting with the 2.74 microversion, it is now possible to specify a host or node explicitly. For example:

$ openstack --os-compute-api-version 2.74 server create \
    --host HOST --hypervisor-hostname HYPERVISOR ... SERVER

Note

This is an admin-only operation by default, though you can modify this behavior using the compute:servers:create:requested_destination rule in policy.yaml.

This avoids the need to explicitly select an availability zone and ensures the scheduler filters are not bypassed.

Usage

Creating an availability zone (AZ) is done by associating metadata with a host aggregate. For this reason, the openstack client provides the ability to create a host aggregate and associate it with an AZ in one command. For example, to create a new aggregate, associating it with an AZ in the process, and add host to it using the openstack client, run:

$ openstack aggregate create --zone my-availability-zone my-aggregate
$ openstack aggregate add host my-aggregate my-host

Note

While it is possible to add a host to multiple host aggregates, it is not possible to add them to multiple availability zones. Attempting to add a host to multiple host aggregates associated with differing availability zones will result in a failure.

Alternatively, you can set this metadata manually for an existing host aggregate. For example:

$ openstack aggregate set \
    --property availability_zone=my-availability-zone my-aggregate

To list all host aggregates and show information about a specific aggregate, in order to determine which AZ the host aggregate(s) belong to, run:

$ openstack aggregate list --long
$ openstack aggregate show my-aggregate

Finally, to disassociate a host aggregate from an availability zone, run:

$ openstack aggregate unset --property availability_zone my-aggregate

Configuration

Refer to Host aggregates for information on configuring both host aggregates and availability zones.