AMD SEV (Secure Encrypted Virtualization)

New in version 20.0.0: (Train)

Secure Encrypted Virtualization (SEV) is a technology from AMD which enables the memory for a VM to be encrypted with a key unique to the VM. SEV is particularly applicable to cloud computing since it can reduce the amount of trust VMs need to place in the hypervisor and administrator of their host system.

Enabling SEV

First the operator will need to ensure the following prerequisites are met:

  • Currently SEV is only supported when using the libvirt compute driver with a libvirt.virt_type of kvm or qemu.

  • At least one of the Nova compute hosts must be AMD hardware capable of supporting SEV. It is entirely possible for the compute plane to be a mix of hardware which can and cannot support SEV, although as per the section on Permanent limitations below, the maximum number of simultaneously running guests with SEV will be limited by the quantity and quality of SEV-capable hardware available.

In order for users to be able to use SEV, the operator will need to perform the following steps:

  • Ensure that sufficient memory is reserved on the SEV compute hosts for host-level services to function correctly at all times. This is particularly important when hosting SEV-enabled guests, since they pin pages in RAM, preventing any memory overcommit which may be in normal operation on other compute hosts.

    It is recommended to achieve this by configuring an rlimit at the /machine.slice top-level cgroup on the host, with all VMs placed inside that. (For extreme detail, see this discussion on the spec.)

    An alternative approach is to configure the reserved_host_memory_mb option in the [DEFAULT] section of nova.conf, based on the expected maximum number of SEV guests simultaneously running on the host, and the details provided in an earlier version of the AMD SEV spec regarding memory region sizes, which cover how to calculate it correctly.

    See the Memory Locking and Accounting section of the AMD SEV spec and previous discussion for further details.

  • A cloud administrator will need to define one or more SEV-enabled flavors as described below, unless it is sufficient for users to define SEV-enabled images.

Additionally the cloud operator should consider the following optional steps:

  • Configure the libvirt.num_memory_encrypted_guests option in nova.conf to represent the number of guests an SEV compute node can host concurrently with memory encrypted at the hardware level. For example:

    [libvirt]
num_memory_encrypted_guests = 15

    This option exists because on AMD SEV-capable hardware, the memory controller has a fixed number of slots for holding encryption keys, one per guest. For example, at the time of writing, earlier generations of hardware only have 15 slots, thereby limiting the number of SEV guests which can be run concurrently to 15. Nova needs to track how many slots are available and used in order to avoid attempting to exceed that limit in the hardware.

    Since version 8.0.0, libvirt exposes maximum number of SEV guests which can run concurrently in its host, so the limit is automatically detected using this feature.

    However in case an older version of libvirt is used, it is not possible for Nova to programmatically detect the correct value and Nova imposes no limit. So this configuration option serves as a stop-gap, allowing the cloud operator the option of providing this value manually.

    This option also allows the cloud operator to set the limit lower than the actual hard limit.

    Note

    If libvirt older than 8.0.0 is used, operators should carefully weigh the benefits vs. the risk when deciding whether to use the default of None or manually impose a limit. The benefits of using the default are a) immediate convenience since nothing needs to be done now, and b) convenience later when upgrading compute hosts to future versions of libvirt, since again nothing will need to be done for the correct limit to be automatically imposed. However the risk is that until auto-detection is implemented, users may be able to attempt to launch guests with encrypted memory on hosts which have already reached the maximum number of guests simultaneously running with encrypted memory. This risk may be mitigated by other limitations which operators can impose, for example if the smallest RAM footprint of any flavor imposes a maximum number of simultaneously running guests which is less than or equal to the SEV limit.

  • Configure ram_allocation_ratio on all SEV-capable compute hosts to 1.0. Use of SEV requires locking guest memory, meaning it is not possible to overcommit host memory.

    Alternatively, you can explicitly configure small pages for instances using the hw:mem_page_size flavor extra spec and equivalent image metadata property. For more information, see Huge pages.

  • Configure libvirt.hw_machine_type on all SEV-capable compute hosts to include x86_64=q35, so that all x86_64 images use the q35 machine type by default. (Currently Nova defaults to the pc machine type for the x86_64 architecture, although it is expected that this will change in the future.)

    Changing the default from pc to q35 makes the creation and configuration of images by users more convenient by removing the need for the hw_machine_type property to be set to q35 on every image for which SEV booting is desired.

    Caution

    Consider carefully whether to set this option. It is particularly important since a limitation of the implementation prevents the user from receiving an error message with a helpful explanation if they try to boot an SEV guest when neither this configuration option nor the image property are set to select a q35 machine type.

    On the other hand, setting it to q35 may have other undesirable side-effects on other images which were expecting to be booted with pc, so it is suggested to set it on a single compute node or aggregate, and perform careful testing of typical images before rolling out the setting to all SEV-capable compute hosts.

Configuring a flavor or image

Once an operator has covered the above steps, users can launch SEV instances either by requesting a flavor for which the operator set the hw:mem_encryption extra spec to True, or by using an image with the hw_mem_encryption property set to True. For example, to enable SEV for a flavor:

$ openstack flavor set FLAVOR-NAME \
    --property hw:mem_encryption=true

These do not inherently cause a preference for SEV-capable hardware, but for now SEV is the only way of fulfilling the requirement for memory encryption. However in the future, support for other hardware-level guest memory encryption technology such as Intel MKTME may be added. If a guest specifically needs to be booted using SEV rather than any other memory encryption technology, it is possible to ensure this by setting the trait{group}:HW_CPU_X86_AMD_SEV extra spec or equivalent image metadata property to required.

In all cases, SEV instances can only be booted from images which have the hw_firmware_type property set to uefi, and only when the machine type is set to q35. This can be set per image by setting the image property hw_machine_type=q35, or per compute node by the operator via libvirt.hw_machine_type as explained above.

Limitations

Impermanent limitations

The following limitations may be removed in the future as the hardware, firmware, and various layers of software receive new features:

  • SEV-encrypted VMs cannot yet be live-migrated or suspended, therefore they will need to be fully shut down before migrating off an SEV host, e.g. if maintenance is required on the host.

  • SEV-encrypted VMs cannot contain directly accessible host devices (PCI passthrough). So for example mdev vGPU support will not currently work. However technologies based on vhost-user should work fine.

  • The boot disk of SEV-encrypted VMs can only be virtio. (virtio-blk is typically the default for libvirt disks on x86, but can also be explicitly set e.g. via the image property hw_disk_bus=virtio). Valid alternatives for the disk include using hw_disk_bus=scsi with hw_scsi_model=virtio-scsi , or hw_disk_bus=sata.

Permanent limitations

The following limitations are expected long-term:

Non-limitations

For the sake of eliminating any doubt, the following actions are not expected to be limited when SEV encryption is used:

  • Cold migration or shelve, since they power off the VM before the operation at which point there is no encrypted memory (although this could change since there is work underway to add support for PMEM)

  • Snapshot, since it only snapshots the disk

  • nova evacuate (despite the name, more akin to resurrection than evacuation), since this is only initiated when the VM is no longer running

  • Attaching any volumes, as long as they do not require attaching via an IDE bus

  • Use of spice / VNC / serial / RDP consoles

  • VM guest virtual NUMA

References