Configuration Options¶

The following is an overview of all available configuration options in Nova.

For a sample configuration file, refer to Sample Configuration File.

DEFAULT¶

debug¶

Type: boolean
Default: False
Mutable: This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append¶

Type: string
Default: <None>
Mutable: This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations¶
Group	Name
DEFAULT	log-config
DEFAULT	log_config

log_date_format¶

Type: string
Default: %Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file¶

Type: string
Default: <None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logfile

log_dir¶

Type: string
Default: <None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logdir

watch_log_file¶

Type: boolean
Default: False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog¶

Type: boolean
Default: False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal¶

Type: boolean
Default: False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility¶

Type: string
Default: LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json¶

Type: boolean
Default: False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr¶

Type: boolean
Default: False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog¶

Type: boolean
Default: False

Log output to Windows Event Log.

log_rotate_interval¶

Type: integer
Default: 1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is setto “interval”.

log_rotate_interval_type¶

Type: string
Default: days
Valid Values: Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count¶

Type: integer
Default: 30

Maximum number of rotated log files.

max_logfile_size_mb¶

Type: integer
Default: 200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type¶

Type: string
Default: none
Valid Values: interval, size, none

Log rotation type.

Possible values

interval: Rotate logs at predefined time intervals.
size: Rotate logs once they reach a predefined size.
none: Do not rotate log files.

logging_context_format_string¶

Type: string
Default: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string¶

Type: string
Default: %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix¶

Type: string
Default: %(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix¶

Type: string
Default: %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format¶

Type: string
Default: %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels¶

Type: list
Default: ['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO', 'glanceclient=WARN', 'oslo.privsep.daemon=INFO']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors¶

Type: boolean
Default: False

Enables or disables publication of error events.

instance_format¶

Type: string
Default: "[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format¶

Type: string
Default: "[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval¶

Type: integer
Default: 0

Interval, number of seconds, of log rate limiting.

rate_limit_burst¶

Type: integer
Default: 0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level¶

Type: string
Default: CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations¶

Type: boolean
Default: False

Enables or disables fatal status of deprecations.

run_external_periodic_tasks¶

Type: boolean
Default: True

Some periodic tasks can be run in a separate process. Should we run them here?

backdoor_port¶

Type: string
Default: <None>

Enable eventlet backdoor. Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number; <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in listening on the smallest unused port number within the specified range of port numbers. The chosen port is displayed in the service’s log file.

backdoor_socket¶

Type: string
Default: <None>

Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with ‘backdoor_port’ in that only one should be provided. If both are provided then the existence of this option overrides the usage of that option. Inside the path {pid} will be replaced with the PID of the current process.

log_options¶

Type: boolean
Default: True

Enables or disables logging values of all registered options when starting a service (at DEBUG level).

graceful_shutdown_timeout¶

Type: integer
Default: 60

Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait.

rpc_conn_pool_size¶

Type: integer
Default: 30
Minimum Value: 1

Size of RPC connection pool.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_conn_pool_size

conn_pool_min_size¶

Type: integer
Default: 2

The pool size limit for connections expiration policy

conn_pool_ttl¶

Type: integer
Default: 1200

The time-to-live in sec of idle connections in the pool

executor_thread_pool_size¶

Type: integer
Default: 64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_thread_pool_size

rpc_response_timeout¶

Type: integer
Default: 60

Seconds to wait for a response from a call.

transport_url¶

Type: string
Default: rabbit://

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

control_exchange¶

Type: string
Default: nova

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

rpc_ping_enabled¶

Type: boolean
Default: False

Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping

internal_service_availability_zone¶

Type: string
Default: internal

Availability zone for internal services.

This option determines the availability zone for the various internal nova services, such as ‘nova-scheduler’, ‘nova-conductor’, etc.

Possible values:

Any string representing an existing availability zone name.

default_availability_zone¶

Type: string
Default: nova

Default availability zone for compute services.

This option determines the default availability zone for ‘nova-compute’ services, which will be used if the service(s) do not belong to aggregates with availability zone metadata.

Possible values:

Any string representing an existing availability zone name.

default_schedule_zone¶

Type: string
Default: <None>

Default availability zone for instances.

This option determines the default availability zone for instances, which will be used when a user does not specify one when creating an instance. The instance(s) will be bound to this availability zone for their lifetime.

Possible values:

Any string representing an existing availability zone name.
None, which means that the instance can move from one availability zone to another during its lifetime if it is moved from one compute node to another.

Related options:

[cinder]/cross_az_attach

password_length¶

Type: integer
Default: 12
Minimum Value: 0

Length of generated instance admin passwords.

instance_usage_audit_period¶

Type: string
Default: month

Time period to generate instance usages for. It is possible to define optional offset to given period by appending @ character followed by a number defining offset.

Possible values:

period, example: hour, day, month` or ``year
period with offset, example: month@15 will result in monthly audits starting on 15th day of month.

use_rootwrap_daemon¶

Type: boolean
Default: False

Start and use a daemon that can run the commands that need to be run with root privileges. This option is usually enabled on nodes that run nova compute processes.

rootwrap_config¶

Type: string
Default: /etc/nova/rootwrap.conf

Path to the rootwrap configuration file.

Goal of the root wrapper is to allow a service-specific unprivileged user to run a number of actions as the root user in the safest manner possible. The configuration file used here must match the one defined in the sudoers entry.

tempdir¶

Type: string
Default: <None>

Explicitly specify the temporary working directory.

compute_driver¶

Type: string
Default: <None>

Defines which driver to use for controlling virtualization.

Possible values:

libvirt.LibvirtDriver
fake.FakeDriver
ironic.IronicDriver
vmwareapi.VMwareVCDriver
hyperv.HyperVDriver
powervm.PowerVMDriver
zvm.ZVMDriver

allow_resize_to_same_host¶

Type: boolean
Default: False

Allow destination machine to match source for resize. Useful when testing in single-host environments. By default it is not allowed to resize to the same host. Setting this option to true will add the same host to the destination options. Also set to true if you allow the ServerGroupAffinityFilter and need to resize.

non_inheritable_image_properties¶

Type: list
Default: ['cache_in_nova', 'bittorrent']

Image properties that should not be inherited from the instance when taking a snapshot.

This option gives an opportunity to select which image-properties should not be inherited by newly created snapshots.

Note

The following image properties are never inherited regardless of whether they are listed in this configuration option or not:

cinder_encryption_key_id
cinder_encryption_key_deletion_policy
img_signature
img_signature_hash_method
img_signature_key_type
img_signature_certificate_uuid

Possible values:

A comma-separated list whose item is an image property. Usually only the image properties that are only needed by base images can be included here, since the snapshots that are created from the base images don’t need them.
Default list: cache_in_nova, bittorrent

max_local_block_devices¶

Type: integer
Default: 3

Maximum number of devices that will result in a local image being created on the hypervisor node.

A negative number means unlimited. Setting max_local_block_devices to 0 means that any request that attempts to create a local disk will fail. This option is meant to limit the number of local discs (so root local disc that is the result of imageRef being used when creating a server, and any other ephemeral and swap disks). 0 does not mean that images will be automatically converted to volumes and boot instances from volumes - it just means that all requests that attempt to create a local disk will fail.

Possible values:

0: Creating a local disk is not allowed.
Negative number: Allows unlimited number of local discs.
Positive number: Allows only these many number of local discs.

compute_monitors¶

Type: list
Default: []

A comma-separated list of monitors that can be used for getting compute metrics. You can use the alias/name from the setuptools entry points for nova.compute.monitors.* namespaces. If no namespace is supplied, the “cpu.” namespace is assumed for backwards-compatibility.

NOTE: Only one monitor per namespace (For example: cpu) can be loaded at a time.

Possible values:

An empty list will disable the feature (Default).
An example value that would enable the CPU bandwidth monitor that uses the virt driver variant:
```
compute_monitors = cpu.virt_driver
```

default_ephemeral_format¶

Type: string
Default: <None>

The default format an ephemeral_volume will be formatted with on creation.

Possible values:

ext2
ext3
ext4
xfs
ntfs (only for Windows guests)

vif_plugging_is_fatal¶

Type: boolean
Default: True

Determine if instance should boot or fail on VIF plugging timeout.

Nova sends a port update to Neutron after an instance has been scheduled, providing Neutron with the necessary information to finish setup of the port. Once completed, Neutron notifies Nova that it has finished setting up the port, at which point Nova resumes the boot of the instance since network connectivity is now supposed to be present. A timeout will occur if the reply is not received after a given interval.

This option determines what Nova does when the VIF plugging timeout event happens. When enabled, the instance will error out. When disabled, the instance will continue to boot on the assumption that the port is ready.

Possible values:

True: Instances should fail after VIF plugging timeout
False: Instances should continue booting after VIF plugging timeout

vif_plugging_timeout¶

Type: integer
Default: 300
Minimum Value: 0

Timeout for Neutron VIF plugging event message arrival.

Number of seconds to wait for Neutron vif plugging events to arrive before continuing or failing (see ‘vif_plugging_is_fatal’).

If you are hitting timeout failures at scale, consider running rootwrap in “daemon mode” in the neutron agent via the [agent]/root_helper_daemon neutron configuration option.

Related options:

vif_plugging_is_fatal - If vif_plugging_timeout is set to zero and vif_plugging_is_fatal is False, events should not be expected to arrive at all.

arq_binding_timeout¶

Type: integer
Default: 300
Minimum Value: 1

Timeout for Accelerator Request (ARQ) bind event message arrival.

Number of seconds to wait for ARQ bind resolution event to arrive. The event indicates that every ARQ for an instance has either bound successfully or failed to bind. If it does not arrive, instance bringup is aborted with an exception.

injected_network_template¶

Type: string
Default: $pybasedir/nova/virt/interfaces.template

Path to ‘/etc/network/interfaces’ template.

The path to a template file for the ‘/etc/network/interfaces’-style file, which will be populated by nova and subsequently used by cloudinit. This provides a method to configure network connectivity in environments without a DHCP server.

The template will be rendered using Jinja2 template engine, and receive a top-level key called interfaces. This key will contain a list of dictionaries, one for each interface.

Refer to the cloudinit documentaion for more information:

https://cloudinit.readthedocs.io/en/latest/topics/datasources.html

Possible values:

A path to a Jinja2-formatted template for a Debian ‘/etc/network/interfaces’ file. This applies even if using a non Debian-derived guest.

Related options:

flat_inject: This must be set to True to ensure nova embeds network configuration information in the metadata provided through the config drive.

preallocate_images¶

Type: string
Default: none
Valid Values: none, space

The image preallocation mode to use.

Image preallocation allows storage for instance images to be allocated up front when the instance is initially provisioned. This ensures immediate feedback is given if enough space isn’t available. In addition, it should significantly improve performance on writes to new blocks and may even improve I/O performance to prewritten blocks due to reduced fragmentation.

Possible values

none: No storage provisioning is done up front
space: Storage is fully allocated at instance start

use_cow_images¶

Type: boolean
Default: True

Enable use of copy-on-write (cow) images.

QEMU/KVM allow the use of qcow2 as backing files. By disabling this, backing files will not be used.

force_raw_images¶

Type: boolean
Default: True

Force conversion of backing images to raw format.

Possible values:

True: Backing image files will be converted to raw image format
False: Backing image files will not be converted

Related options:

compute_driver: Only the libvirt driver uses this option.
[libvirt]/images_type: If images_type is rbd, setting this option to False is not allowed. See the bug https://bugs.launchpad.net/nova/+bug/1816686 for more details.

virt_mkfs¶

Type: multi-valued
Default: ''

Name of the mkfs commands for ephemeral device.

The format is <os_type>=<mkfs command>

resize_fs_using_block_device¶

Type: boolean
Default: False

Enable resizing of filesystems via a block device.

If enabled, attempt to resize the filesystem by accessing the image over a block device. This is done by the host and may not be necessary if the image contains a recent version of cloud-init. Possible mechanisms require the nbd driver (for qcow and raw), or loop (for raw).

timeout_nbd¶

Type: integer
Default: 10
Minimum Value: 0

Amount of time, in seconds, to wait for NBD device start up.

pointer_model¶

Type: string
Default: usbtablet
Valid Values: ps2mouse, usbtablet, <None>

Generic property to specify the pointer type.

Input devices allow interaction with a graphical framebuffer. For example to provide a graphic tablet for absolute cursor movement.

If set, either the hw_input_bus or hw_pointer_model image metadata properties will take precedence over this configuration option.

Related options:

usbtablet must be configured with VNC enabled or SPICE enabled and SPICE agent disabled. When used with libvirt the instance mode should be configured as HVM.

Possible values

ps2mouse: Uses relative movement. Mouse connected by PS2
usbtablet: Uses absolute movement. Tablet connect by USB
<None>: Uses default behavior provided by drivers (mouse on PS2 for libvirt x86)

vcpu_pin_set¶

Type: string
Default: <None>

Mask of host CPUs that can be used for VCPU resources.

The behavior of this option depends on the definition of the [compute] cpu_dedicated_set option and affects the behavior of the [compute] cpu_shared_set option.

If [compute] cpu_dedicated_set is defined, defining this option will result in an error.
If [compute] cpu_dedicated_set is not defined, this option will be used to determine inventory for VCPU resources and to limit the host CPUs that both pinned and unpinned instances can be scheduled to, overriding the [compute] cpu_shared_set option.

Possible values:

A comma-separated list of physical CPU numbers that virtual CPUs can be allocated from. Each element should be either a single CPU number, a range of CPU numbers, or a caret followed by a CPU number to be excluded from a previous range. For example:
```
vcpu_pin_set = "4-12,^8,15"
```

Related options:

[compute] cpu_dedicated_set
[compute] cpu_shared_set

Warning

This option is deprecated for removal since 20.0.0. Its value may be silently ignored in the future.

Reason: This option has been superseded by the [compute] cpu_dedicated_set and [compute] cpu_shared_set options, which allow things like the co-existence of pinned and unpinned instances on the same host (for the libvirt driver).

reserved_huge_pages¶

Type: unknown type
Default: <None>

Number of huge/large memory pages to reserved per NUMA host cell.

Possible values:

A list of valid key=value which reflect NUMA node ID, page size (Default unit is KiB) and number of pages to be reserved. For example:
```
reserved_huge_pages = node:0,size:2048,count:64
reserved_huge_pages = node:1,size:1GB,count:1
```
In this example we are reserving on NUMA node 0 64 pages of 2MiB and on NUMA node 1 1 page of 1GiB.

reserved_host_disk_mb¶

Type: integer
Default: 0
Minimum Value: 0

Amount of disk resources in MB to make them always available to host. The disk usage gets reported back to the scheduler from nova-compute running on the compute nodes. To prevent the disk resources from being considered as available, this option can be used to reserve disk space for that host.

Possible values:

Any positive integer representing amount of disk in MB to reserve for the host.

reserved_host_memory_mb¶

Type: integer
Default: 512
Minimum Value: 0

Amount of memory in MB to reserve for the host so that it is always available to host processes. The host resources usage is reported back to the scheduler continuously from nova-compute running on the compute node. To prevent the host memory from being considered as available, this option is used to reserve memory for the host.

Possible values:

Any positive integer representing amount of memory in MB to reserve for the host.

reserved_host_cpus¶

Type: integer
Default: 0
Minimum Value: 0

Number of host CPUs to reserve for host processes.

The host resources usage is reported back to the scheduler continuously from nova-compute running on the compute node. This value is used to determine the reserved value reported to placement.

This option cannot be set if the [compute] cpu_shared_set or [compute] cpu_dedicated_set config options have been defined. When these options are defined, any host CPUs not included in these values are considered reserved for the host.

Possible values:

Any positive integer representing number of physical CPUs to reserve for the host.

Related options:

[compute] cpu_shared_set
[compute] cpu_dedicated_set

cpu_allocation_ratio¶

Type: floating point
Default: <None>
Minimum Value: 0.0

Virtual CPU to physical CPU allocation ratio.

This option is used to influence the hosts selected by the Placement API by configuring the allocation ratio for VCPU inventory.

Note

This option does not affect PCPU inventory, which cannot be overcommitted.

Note

If this option is set to something other than None or 0.0, the allocation ratio will be overwritten by the value of this option, otherwise, the allocation ratio will not change. Once set to a non-default value, it is not possible to “unset” the config to get back to the default behavior. If you want to reset back to the initial value, explicitly specify it to the value of initial_cpu_allocation_ratio.

Possible values:

Any valid positive integer or float value

Related options:

initial_cpu_allocation_ratio

ram_allocation_ratio¶

Type: floating point
Default: <None>
Minimum Value: 0.0

Virtual RAM to physical RAM allocation ratio.

This option is used to influence the hosts selected by the Placement API by configuring the allocation ratio for MEMORY_MB inventory.

Note

Possible values:

Any valid positive integer or float value

Related options:

initial_ram_allocation_ratio

disk_allocation_ratio¶

Type: floating point
Default: <None>
Minimum Value: 0.0

Virtual disk to physical disk allocation ratio.

This option is used to influence the hosts selected by the Placement API by configuring the allocation ratio for DISK_GB inventory.

When configured, a ratio greater than 1.0 will result in over-subscription of the available physical disk, which can be useful for more efficiently packing instances created with images that do not use the entire virtual disk, such as sparse or compressed images. It can be set to a value between 0.0 and 1.0 in order to preserve a percentage of the disk for uses other than instances.

Note

If the value is set to >1, we recommend keeping track of the free disk space, as the value approaching 0 may result in the incorrect functioning of instances using it at the moment.

Note

Possible values:

Any valid positive integer or float value

Related options:

initial_disk_allocation_ratio

initial_cpu_allocation_ratio¶

Type: floating point
Default: 16.0
Minimum Value: 0.0

Initial virtual CPU to physical CPU allocation ratio.

This is only used when initially creating the computes_nodes table record for a given nova-compute service.

See https://docs.openstack.org/nova/latest/admin/configuration/schedulers.html for more details and usage scenarios.

Related options:

cpu_allocation_ratio

initial_ram_allocation_ratio¶

Type: floating point
Default: 1.5
Minimum Value: 0.0

Initial virtual RAM to physical RAM allocation ratio.

This is only used when initially creating the computes_nodes table record for a given nova-compute service.

See https://docs.openstack.org/nova/latest/admin/configuration/schedulers.html for more details and usage scenarios.

Related options:

ram_allocation_ratio

initial_disk_allocation_ratio¶

Type: floating point
Default: 1.0
Minimum Value: 0.0

Initial virtual disk to physical disk allocation ratio.

This is only used when initially creating the computes_nodes table record for a given nova-compute service.

See https://docs.openstack.org/nova/latest/admin/configuration/schedulers.html for more details and usage scenarios.

Related options:

disk_allocation_ratio

console_host¶

Type: string
Default: <current_hostname>

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Console proxy host to be used to connect to instances on this host. It is the publicly visible name for the console host.

Possible values:

Current hostname (default) or any string representing hostname.

default_access_ip_network_name¶

Type: string
Default: <None>

Name of the network to be used to set access IPs for instances. If there are multiple IPs to choose from, an arbitrary one will be chosen.

Possible values:

None (default)
Any string representing network name.

instances_path¶

Type: string
Default: $state_path/instances

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Specifies where instances are stored on the hypervisor’s disk. It can point to locally attached storage or a directory on NFS.

Possible values:

$state_path/instances where state_path is a config option that specifies the top-level directory for maintaining nova’s state. (default) or Any string representing directory path.

Related options:

[workarounds]/ensure_libvirt_rbd_instance_dir_cleanup

instance_usage_audit¶

Type: boolean
Default: False

This option enables periodic compute.instance.exists notifications. Each compute node must be configured to generate system usage data. These notifications are consumed by OpenStack Telemetry service.

live_migration_retry_count¶

Type: integer
Default: 30
Minimum Value: 0

Maximum number of 1 second retries in live_migration. It specifies number of retries to iptables when it complains. It happens when an user continuously sends live-migration request to same host leading to concurrent request to iptables.

Possible values:

Any positive integer representing retry count.

resume_guests_state_on_host_boot¶

Type: boolean
Default: False

This option specifies whether to start guests that were running before the host rebooted. It ensures that all of the instances on a Nova compute node resume their state each time the compute node boots or restarts.

network_allocate_retries¶

Type: integer
Default: 0
Minimum Value: 0

Number of times to retry network allocation. It is required to attempt network allocation retries if the virtual interface plug fails.

Possible values:

Any positive integer representing retry count.

max_concurrent_builds¶

Type: integer
Default: 10
Minimum Value: 0

Limits the maximum number of instance builds to run concurrently by nova-compute. Compute service can attempt to build an infinite number of instances, if asked to do so. This limit is enforced to avoid building unlimited instance concurrently on a compute node. This value can be set per compute node.

Possible Values:

0 : treated as unlimited.
Any positive integer representing maximum concurrent builds.

max_concurrent_snapshots¶

Type: integer
Default: 5
Minimum Value: 0

Maximum number of instance snapshot operations to run concurrently. This limit is enforced to prevent snapshots overwhelming the host/network/storage and causing failure. This value can be set per compute node.

Possible Values:

0 : treated as unlimited.
Any positive integer representing maximum concurrent snapshots.

max_concurrent_live_migrations¶

Type: integer
Default: 1
Minimum Value: 0

Maximum number of live migrations to run concurrently. This limit is enforced to avoid outbound live migrations overwhelming the host/network and causing failures. It is not recommended that you change this unless you are very sure that doing so is safe and stable in your environment.

Possible values:

0 : treated as unlimited.
Any positive integer representing maximum number of live migrations to run concurrently.

block_device_allocate_retries¶

Type: integer
Default: 60
Minimum Value: 0

The number of times to check for a volume to be “available” before attaching it during server create.

When creating a server with block device mappings where source_type is one of blank, image or snapshot and the destination_type is volume, the nova-compute service will create a volume and then attach it to the server. Before the volume can be attached, it must be in status “available”. This option controls how many times to check for the created volume to be “available” before it is attached.

If the operation times out, the volume will be deleted if the block device mapping delete_on_termination value is True.

It is recommended to configure the image cache in the block storage service to speed up this operation. See https://docs.openstack.org/cinder/latest/admin/blockstorage-image-volume-cache.html for details.

Possible values:

60 (default)
If value is 0, then one attempt is made.
For any value > 0, total attempts are (value + 1)

Related options:

block_device_allocate_retries_interval - controls the interval between checks

sync_power_state_pool_size¶

Type: integer
Default: 1000

Number of greenthreads available for use to sync power states.

This option can be used to reduce the number of concurrent requests made to the hypervisor or system with real instance power states for performance reasons, for example, with Ironic.

Possible values:

Any positive integer representing greenthreads count.

sync_power_state_interval¶

Type: integer
Default: 600

Interval to sync power states between the database and the hypervisor.

The interval that Nova checks the actual virtual machine power state and the power state that Nova has in its database. If a user powers down their VM, Nova updates the API to report the VM has been powered down. Should something turn on the VM unexpectedly, Nova will turn the VM back off to keep the system in the expected state.

Possible values:

0: Will run at the default periodic interval.
Any value < 0: Disables the option.
Any positive integer in seconds.

Related options:

If handle_virt_lifecycle_events in the workarounds group is false and this option is negative, then instances that get out of sync between the hypervisor and the Nova database will have to be synchronized manually.

heal_instance_info_cache_interval¶

Type: integer
Default: 60

Interval between instance network information cache updates.

Number of seconds after which each compute node runs the task of querying Neutron for all of its instances networking information, then updates the Nova db with that information. Nova will never update it’s cache if this option is set to 0. If we don’t update the cache, the metadata service and nova-api endpoints will be proxying incorrect network data about the instance. So, it is not recommended to set this option to 0.

Possible values:

Any positive integer in seconds.
Any value <=0 will disable the sync. This is not recommended.

reclaim_instance_interval¶

Type: integer
Default: 0

Interval for reclaiming deleted instances.

A value greater than 0 will enable SOFT_DELETE of instances. This option decides whether the server to be deleted will be put into the SOFT_DELETED state. If this value is greater than 0, the deleted server will not be deleted immediately, instead it will be put into a queue until it’s too old (deleted time greater than the value of reclaim_instance_interval). The server can be recovered from the delete queue by using the restore action. If the deleted server remains longer than the value of reclaim_instance_interval, it will be deleted by a periodic task in the compute service automatically.

Note that this option is read from both the API and compute nodes, and must be set globally otherwise servers could be put into a soft deleted state in the API and never actually reclaimed (deleted) on the compute node.

Note

When using this option, you should also configure the [cinder] auth options, e.g. auth_type, auth_url, username, etc. Since the reclaim happens in a periodic task, there is no user token to cleanup volumes attached to any SOFT_DELETED servers so nova must be configured with administrator role access to cleanup those resources in cinder.

Possible values:

Any positive integer(in seconds) greater than 0 will enable this option.
Any value <=0 will disable the option.

Related options:

[cinder] auth options for cleaning up volumes attached to servers during the reclaim process

volume_usage_poll_interval¶

Type: integer
Default: 0

Interval for gathering volume usages.

This option updates the volume usage cache for every volume_usage_poll_interval number of seconds.

Possible values:

Any positive integer(in seconds) greater than 0 will enable this option.
Any value <=0 will disable the option.

shelved_poll_interval¶

Type: integer
Default: 3600

Interval for polling shelved instances to offload.

The periodic task runs for every shelved_poll_interval number of seconds and checks if there are any shelved instances. If it finds a shelved instance, based on the ‘shelved_offload_time’ config value it offloads the shelved instances. Check ‘shelved_offload_time’ config option description for details.

Possible values:

Any value <= 0: Disables the option.
Any positive integer in seconds.

Related options:

shelved_offload_time

shelved_offload_time¶

Type: integer
Default: 0

Time before a shelved instance is eligible for removal from a host.

By default this option is set to 0 and the shelved instance will be removed from the hypervisor immediately after shelve operation. Otherwise, the instance will be kept for the value of shelved_offload_time(in seconds) so that during the time period the unshelve action will be faster, then the periodic task will remove the instance from hypervisor after shelved_offload_time passes.

Possible values:

0: Instance will be immediately offloaded after being
shelved.
Any value < 0: An instance will never offload.
Any positive integer in seconds: The instance will exist for the specified number of seconds before being offloaded.

instance_delete_interval¶

Type: integer
Default: 300

Interval for retrying failed instance file deletes.

This option depends on ‘maximum_instance_delete_attempts’. This option specifies how often to retry deletes whereas ‘maximum_instance_delete_attempts’ specifies the maximum number of retry attempts that can be made.

Possible values:

0: Will run at the default periodic interval.
Any value < 0: Disables the option.
Any positive integer in seconds.

Related options:

maximum_instance_delete_attempts from instance_cleaning_opts group.

block_device_allocate_retries_interval¶

Type: integer
Default: 3
Minimum Value: 0

Interval (in seconds) between block device allocation retries on failures.

This option allows the user to specify the time interval between consecutive retries. The block_device_allocate_retries option specifies the maximum number of retries.

Possible values:

0: Disables the option.
Any positive integer in seconds enables the option.

Related options:

block_device_allocate_retries - controls the number of retries

scheduler_instance_sync_interval¶

Type: integer
Default: 120

Interval between sending the scheduler a list of current instance UUIDs to verify that its view of instances is in sync with nova.

If the CONF option ‘scheduler_tracks_instance_changes’ is False, the sync calls will not be made. So, changing this option will have no effect.

If the out of sync situations are not very common, this interval can be increased to lower the number of RPC messages being sent. Likewise, if sync issues turn out to be a problem, the interval can be lowered to check more frequently.

Possible values:

0: Will run at the default periodic interval.
Any value < 0: Disables the option.
Any positive integer in seconds.

Related options:

This option has no impact if scheduler_tracks_instance_changes is set to False.

update_resources_interval¶

Type: integer
Default: 0

Interval for updating compute resources.

This option specifies how often the update_available_resource periodic task should run. A number less than 0 means to disable the task completely. Leaving this at the default of 0 will cause this to run at the default periodic interval. Setting it to any positive value will cause it to run at approximately that number of seconds.

Possible values:

0: Will run at the default periodic interval.
Any value < 0: Disables the option.
Any positive integer in seconds.

reboot_timeout¶

Type: integer
Default: 0
Minimum Value: 0

Time interval after which an instance is hard rebooted automatically.

When doing a soft reboot, it is possible that a guest kernel is completely hung in a way that causes the soft reboot task to not ever finish. Setting this option to a time period in seconds will automatically hard reboot an instance if it has been stuck in a rebooting state longer than N seconds.

Possible values:

0: Disables the option (default).
Any positive integer in seconds: Enables the option.

instance_build_timeout¶

Type: integer
Default: 0
Minimum Value: 0

Maximum time in seconds that an instance can take to build.

If this timer expires, instance status will be changed to ERROR. Enabling this option will make sure an instance will not be stuck in BUILD state for a longer period.

Possible values:

0: Disables the option (default)
Any positive integer in seconds: Enables the option.

rescue_timeout¶

Type: integer
Default: 0
Minimum Value: 0

Interval to wait before un-rescuing an instance stuck in RESCUE.

Possible values:

0: Disables the option (default)
Any positive integer in seconds: Enables the option.

resize_confirm_window¶

Type: integer
Default: 0
Minimum Value: 0

Automatically confirm resizes after N seconds.

Resize functionality will save the existing server before resizing. After the resize completes, user is requested to confirm the resize. The user has the opportunity to either confirm or revert all changes. Confirm resize removes the original server and changes server status from resized to active. Setting this option to a time period (in seconds) will automatically confirm the resize if the server is in resized state longer than that time.

Possible values:

0: Disables the option (default)
Any positive integer in seconds: Enables the option.

shutdown_timeout¶

Type: integer
Default: 60
Minimum Value: 0

Total time to wait in seconds for an instance to perform a clean shutdown.

It determines the overall period (in seconds) a VM is allowed to perform a clean shutdown. While performing stop, rescue and shelve, rebuild operations, configuring this option gives the VM a chance to perform a controlled shutdown before the instance is powered off. The default timeout is 60 seconds. A value of 0 (zero) means the guest will be powered off immediately with no opportunity for guest OS clean-up.

The timeout value can be overridden on a per image basis by means of os_shutdown_timeout that is an image metadata setting allowing different types of operating systems to specify how much time they need to shut down cleanly.

Possible values:

A positive integer or 0 (default value is 60).

running_deleted_instance_action¶

Type: string
Default: reap
Valid Values: reap, log, shutdown, noop

The compute service periodically checks for instances that have been deleted in the database but remain running on the compute node. The above option enables action to be taken when such instances are identified.

Related options:

running_deleted_instance_poll_interval
running_deleted_instance_timeout

Possible values

reap: Powers down the instances and deletes them
log: Logs warning message about deletion of the resource
shutdown: Powers down instances and marks them as non-bootable which can be later used for debugging/analysis
noop: Takes no action

running_deleted_instance_poll_interval¶

Type: integer
Default: 1800

Time interval in seconds to wait between runs for the clean up action. If set to 0, above check will be disabled. If “running_deleted_instance _action” is set to “log” or “reap”, a value greater than 0 must be set.

Possible values:

Any positive integer in seconds enables the option.
0: Disables the option.
1800: Default value.

Related options:

running_deleted_instance_action

running_deleted_instance_timeout¶

Type: integer
Default: 0

Time interval in seconds to wait for the instances that have been marked as deleted in database to be eligible for cleanup.

Possible values:

Any positive integer in seconds(default is 0).

Related options:

“running_deleted_instance_action”

maximum_instance_delete_attempts¶

Type: integer
Default: 5
Minimum Value: 1

The number of times to attempt to reap an instance’s files.

This option specifies the maximum number of retry attempts that can be made.

Possible values:

Any positive integer defines how many attempts are made.

Related options:

[DEFAULT] instance_delete_interval can be used to disable this option.

osapi_compute_unique_server_name_scope¶

Type: string
Default: ''
Valid Values: ‘’, project, global

Sets the scope of the check for unique instance names.

The default doesn’t check for unique names. If a scope for the name check is set, a launch of a new instance or an update of an existing instance with a duplicate name will result in an ‘’InstanceExists’’ error. The uniqueness is case-insensitive. Setting this option can increase the usability for end users as they don’t have to distinguish among instances with the same name by their IDs.

Possible values

‘’: An empty value means that no uniqueness check is done and duplicate names are possible
project: The instance name check is done only for instances within the same project
global: The instance name check is done for all instances regardless of the project

enable_new_services¶

Type: boolean
Default: True

Enable new nova-compute services on this host automatically.

When a new nova-compute service starts up, it gets registered in the database as an enabled service. Sometimes it can be useful to register new compute services in disabled state and then enabled them at a later point in time. This option only sets this behavior for nova-compute services, it does not auto-disable other services like nova-conductor, nova-scheduler, or nova-osapi_compute.

Possible values:

True: Each new compute service is enabled as soon as it registers itself.
False: Compute services must be enabled via an os-services REST API call or with the CLI with nova service-enable <hostname> <binary>, otherwise they are not ready to use.

instance_name_template¶

Type: string
Default: instance-%08x

Template string to be used to generate instance names.

This template controls the creation of the database name of an instance. This is not the display name you enter when creating an instance (via Horizon or CLI). For a new deployment it is advisable to change the default value (which uses the database autoincrement) to another value which makes use of the attributes of an instance, like instance-%(uuid)s. If you already have instances in your deployment when you change this, your deployment will break.

Possible values:

A string which either uses the instance database ID (like the default)
A string with a list of named database columns, for example %(id)d or %(uuid)s or %(hostname)s.

migrate_max_retries¶

Type: integer
Default: -1
Minimum Value: -1

Number of times to retry live-migration before failing.

Possible values:

If == -1, try until out of hosts (default)
If == 0, only try once, no retries
Integer greater than 0

config_drive_format¶

Type: string
Default: iso9660
Valid Values: iso9660, vfat

Config drive format.

Config drive format that will contain metadata attached to the instance when it boots.

Related options:

This option is meaningful when one of the following alternatives occur:
1. force_config_drive option set to true
2. the REST API call to create the instance contains an enable flag for config drive option
3. the image used to create the instance requires a config drive, this is defined by img_config_drive property for that image.
A compute node running Hyper-V hypervisor can be configured to attach config drive as a CD drive. To attach the config drive as a CD drive, set the [hyperv] config_drive_cdrom option to true.

Possible values

iso9660: A file system image standard that is widely supported across operating systems.
vfat: Provided for legacy reasons and to enable live migration with the libvirt driver and non-shared storage

Warning

This option is deprecated for removal since 19.0.0. Its value may be silently ignored in the future.

Reason: This option was originally added as a workaround for bug in libvirt, #1246201, that was resolved in libvirt v1.2.17. As a result, this option is no longer necessary or useful.

force_config_drive¶

Type: boolean
Default: False

Force injection to take place on a config drive

When this option is set to true config drive functionality will be forced enabled by default, otherwise users can still enable config drives via the REST API or image metadata properties. Launched instances are not affected by this option.

Possible values:

True: Force to use of config drive regardless the user’s input in the
REST API call.
False: Do not force use of config drive. Config drives can still be
enabled via the REST API or image metadata properties.

Related options:

Use the ‘mkisofs_cmd’ flag to set the path where you install the genisoimage program. If genisoimage is in same path as the nova-compute service, you do not need to set this flag.
To use a config drive with Hyper-V, you must set the ‘mkisofs_cmd’ value to the full path to an mkisofs.exe installation. Additionally, you must set the qemu_img_cmd value in the hyperv configuration section to the full path to an qemu-img command installation.

mkisofs_cmd¶

Type: string
Default: genisoimage

Name or path of the tool used for ISO image creation.

Use the mkisofs_cmd flag to set the path where you install the genisoimage program. If genisoimage is on the system path, you do not need to change the default value.

To use a config drive with Hyper-V, you must set the mkisofs_cmd value to the full path to an mkisofs.exe installation. Additionally, you must set the qemu_img_cmd value in the hyperv configuration section to the full path to an qemu-img command installation.

Possible values:

Name of the ISO image creator program, in case it is in the same directory as the nova-compute service
Path to ISO image creator program

Related options:

This option is meaningful when config drives are enabled.
To use config drive with Hyper-V, you must set the qemu_img_cmd value in the hyperv configuration section to the full path to an qemu-img command installation.

my_ip¶

Type: string
Default: <host_ipv4>

This option has a sample default set, which means that its actual default value may vary from the one documented above.

The IP address which the host is using to connect to the management network.

Possible values:

String with valid IP address. Default is IPv4 address of this host.

Related options:

my_block_storage_ip

my_block_storage_ip¶

Type: string
Default: $my_ip

The IP address which is used to connect to the block storage network.

Possible values:

String with valid IP address. Default is IP address of this host.

Related options:

my_ip - if my_block_storage_ip is not set, then my_ip value is used.

host¶

Type: string
Default: <current_hostname>

This option has a sample default set, which means that its actual default value may vary from the one documented above.

Hostname, FQDN or IP address of this host.

Used as:

the oslo.messaging queue name for nova-compute worker
we use this value for the binding_host sent to neutron. This means if you use a neutron agent, it should have the same value for host.
cinder host attachment information

Must be valid within AMQP key.

Possible values:

String with hostname, FQDN or IP address. Default is hostname of this host.

flat_injected¶

Type: boolean
Default: False

This option determines whether the network setup information is injected into the VM before it is booted. While it was originally designed to be used only by nova-network, it is also used by the vmware virt driver to control whether network information is injected into a VM. The libvirt virt driver also uses it when we use config_drive to configure network to control whether network information is injected into a VM.

record¶

Type: string
Default: <None>

Filename that will be used for storing websocket frames received and sent by a proxy service (like VNC, spice, serial) running on this host. If this is not set, no recording will be done.

daemon¶

Type: boolean
Default: False

Run as a background process.

ssl_only¶

Type: boolean
Default: False

Disallow non-encrypted connections.

Related options:

cert
key

source_is_ipv6¶

Type: boolean
Default: False

Set to True if source host is addressed with IPv6.

cert¶

Type: string
Default: self.pem

Path to SSL certificate file.

Related options:

key
ssl_only
[console] ssl_ciphers
[console] ssl_minimum_version

key¶

Type: string
Default: <None>

SSL key file (if separate from cert).

Related options:

cert

web¶

Type: string
Default: /usr/share/spice-html5

Path to directory with content which will be served by a web server.

pybasedir¶

Type: string
Default: <Path>

This option has a sample default set, which means that its actual default value may vary from the one documented above.

The directory where the Nova python modules are installed.

This directory is used to store template files for networking and remote console access. It is also the default path for other config options which need to persist Nova internal data. It is very unlikely that you need to change this option from its default value.

Possible values:

The full path to a directory.

Related options:

state_path

state_path¶

Type: string
Default: $pybasedir

The top-level directory for maintaining Nova’s state.

This directory is used to store Nova’s internal state. It is used by a variety of other config options which derive from this. In some scenarios (for example migrations) it makes sense to use a storage location which is shared between multiple compute hosts (for example via NFS). Unless the option instances_path gets overwritten, this directory can grow very large.

Possible values:

The full path to a directory. Defaults to value provided in pybasedir.

long_rpc_timeout¶

Type: integer
Default: 1800

This option allows setting an alternate timeout value for RPC calls that have the potential to take a long time. If set, RPC calls to other services will use this value for the timeout (in seconds) instead of the global rpc_response_timeout value.

Operations with RPC calls that utilize this value:

live migration
scheduling
enabling/disabling a compute service
image pre-caching
snapshot-based / cross-cell resize
resize / cold migration
volume attach

Related options:

rpc_response_timeout

report_interval¶

Type: integer
Default: 10

Number of seconds indicating how frequently the state of services on a given hypervisor is reported. Nova needs to know this to determine the overall health of the deployment.

Related Options:

service_down_time report_interval should be less than service_down_time. If service_down_time is less than report_interval, services will routinely be considered down, because they report in too rarely.

service_down_time¶

Type: integer
Default: 60

Maximum time in seconds since last check-in for up service

Each compute node periodically updates their database status based on the specified report interval. If the compute node hasn’t updated the status for more than service_down_time, then the compute node is considered down.

Related Options:

report_interval (service_down_time should not be less than report_interval)

periodic_enable¶

Type: boolean
Default: True

Enable periodic tasks.

If set to true, this option allows services to periodically run tasks on the manager.

In case of running multiple schedulers or conductors you may want to run periodic tasks on only one host - in this case disable this option for all hosts but one.

periodic_fuzzy_delay¶

Type: integer
Default: 60
Minimum Value: 0

Number of seconds to randomly delay when starting the periodic task scheduler to reduce stampeding.

When compute workers are restarted in unison across a cluster, they all end up running the periodic tasks at the same time causing problems for the external services. To mitigate this behavior, periodic_fuzzy_delay option allows you to introduce a random initial delay when starting the periodic task scheduler.

Possible Values:

Any positive integer (in seconds)
0 : disable the random delay

enabled_apis¶

Type: list
Default: ['osapi_compute', 'metadata']

List of APIs to be enabled by default.

enabled_ssl_apis¶

Type: list
Default: []

List of APIs with enabled SSL.

Nova provides SSL support for the API servers. enabled_ssl_apis option allows configuring the SSL support.

osapi_compute_listen¶

Type: string
Default: 0.0.0.0

IP address on which the OpenStack API will listen.

The OpenStack API service listens on this IP address for incoming requests.

osapi_compute_listen_port¶

Type: port number
Default: 8774
Minimum Value: 0
Maximum Value: 65535

Port on which the OpenStack API will listen.

The OpenStack API service listens on this port number for incoming requests.

osapi_compute_workers¶

Type: integer
Default: <None>
Minimum Value: 1

Number of workers for OpenStack API service. The default will be the number of CPUs available.

OpenStack API services can be configured to run as multi-process (workers). This overcomes the problem of reduction in throughput when API request concurrency increases. OpenStack API service will run in the specified number of processes.

Possible Values:

Any positive integer
None (default value)

metadata_listen¶

Type: string
Default: 0.0.0.0

IP address on which the metadata API will listen.

The metadata API service listens on this IP address for incoming requests.

metadata_listen_port¶

Type: port number
Default: 8775
Minimum Value: 0
Maximum Value: 65535

Port on which the metadata API will listen.

The metadata API service listens on this port number for incoming requests.

metadata_workers¶

Type: integer
Default: <None>
Minimum Value: 1

Number of workers for metadata service. If not specified the number of available CPUs will be used.

The metadata service can be configured to run as multi-process (workers). This overcomes the problem of reduction in throughput when API request concurrency increases. The metadata service will run in the specified number of processes.

Possible Values:

Any positive integer
None (default value)

servicegroup_driver¶

Type: string
Default: db
Valid Values: db, mc

This option specifies the driver to be used for the servicegroup service.

ServiceGroup API in nova enables checking status of a compute node. When a compute worker running the nova-compute daemon starts, it calls the join API to join the compute group. Services like nova scheduler can query the ServiceGroup API to check if a node is alive. Internally, the ServiceGroup client driver automatically updates the compute worker status. There are multiple backend implementations for this service: Database ServiceGroup driver and Memcache ServiceGroup driver.

Related Options:

service_down_time (maximum time since last check-in for up service)

Possible values

db: Database ServiceGroup driver
mc: Memcache ServiceGroup driver

api¶

Options under this group are used to define Nova API.

auth_strategy¶

Type: string
Default: keystone
Valid Values: keystone, noauth2

Determine the strategy to use for authentication.

Possible values

keystone: Use keystone for authentication.
noauth2: Designed for testing only, as it does no actual credential checking. ‘noauth2’ provides administrative credentials only if ‘admin’ is specified as the username.

Warning

This option is deprecated for removal since 21.0.0. Its value may be silently ignored in the future.

Reason: The only non-default choice, noauth2, is for internal development and testing purposes only and should not be used in deployments. This option and its middleware, NoAuthMiddleware[V2_18], will be removed in a future release.

use_forwarded_for¶

Type: boolean
Default: False

When True, the ‘X-Forwarded-For’ header is treated as the canonical remote address. When False (the default), the ‘remote_address’ header is used.

You should only enable this if you have an HTML sanitizing proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_forwarded_for

config_drive_skip_versions¶

Type: string
Default: 1.0 2007-01-19 2007-03-01 2007-08-29 2007-10-10 2007-12-15 2008-02-01 2008-09-01

When gathering the existing metadata for a config drive, the EC2-style metadata is returned for all versions that don’t appear in this option. As of the Liberty release, the available versions are:

1.0
2007-01-19
2007-03-01
2007-08-29
2007-10-10
2007-12-15
2008-02-01
2008-09-01
2009-04-04

The option is in the format of a single string, with each version separated by a space.

Possible values:

Any string that represents zero or more versions, separated by spaces.

Deprecated Variations¶
Group	Name
DEFAULT	config_drive_skip_versions

vendordata_providers¶

Type: list
Default: ['StaticJSON']

A list of vendordata providers.

vendordata providers are how deployers can provide metadata via configdrive and metadata that is specific to their deployment.

For more information on the requirements for implementing a vendordata dynamic endpoint, please see the vendordata.rst file in the nova developer reference.

Related options:

vendordata_dynamic_targets
vendordata_dynamic_ssl_certfile
vendordata_dynamic_connect_timeout
vendordata_dynamic_read_timeout
vendordata_dynamic_failure_fatal

Deprecated Variations¶
Group	Name
DEFAULT	vendordata_providers

vendordata_dynamic_targets¶

Type: list
Default: []

A list of targets for the dynamic vendordata provider. These targets are of the form <name>@<url>.

The dynamic vendordata provider collects metadata by contacting external REST services and querying them for information about the instance. This behaviour is documented in the vendordata.rst file in the nova developer reference.

Deprecated Variations¶
Group	Name
DEFAULT	vendordata_dynamic_targets

vendordata_dynamic_ssl_certfile¶

Type: string
Default: ''

Path to an optional certificate file or CA bundle to verify dynamic vendordata REST services ssl certificates against.

Possible values:

An empty string, or a path to a valid certificate file

Related options:

vendordata_providers
vendordata_dynamic_targets
vendordata_dynamic_connect_timeout
vendordata_dynamic_read_timeout
vendordata_dynamic_failure_fatal

Deprecated Variations¶
Group	Name
DEFAULT	vendordata_dynamic_ssl_certfile

vendordata_dynamic_connect_timeout¶

Type: integer
Default: 5
Minimum Value: 3

Maximum wait time for an external REST service to connect.

Possible values:

Any integer with a value greater than three (the TCP packet retransmission timeout). Note that instance start may be blocked during this wait time, so this value should be kept small.

Related options:

vendordata_providers
vendordata_dynamic_targets
vendordata_dynamic_ssl_certfile
vendordata_dynamic_read_timeout
vendordata_dynamic_failure_fatal

Deprecated Variations¶
Group	Name
DEFAULT	vendordata_dynamic_connect_timeout

vendordata_dynamic_read_timeout¶

Type: integer
Default: 5
Minimum Value: 0

Maximum wait time for an external REST service to return data once connected.

Possible values:

Any integer. Note that instance start is blocked during this wait time, so this value should be kept small.

Related options:

vendordata_providers
vendordata_dynamic_targets
vendordata_dynamic_ssl_certfile
vendordata_dynamic_connect_timeout
vendordata_dynamic_failure_fatal

Deprecated Variations¶
Group	Name
DEFAULT	vendordata_dynamic_read_timeout

vendordata_dynamic_failure_fatal¶

Type: boolean
Default: False

Should failures to fetch dynamic vendordata be fatal to instance boot?

Related options:

vendordata_providers
vendordata_dynamic_targets
vendordata_dynamic_ssl_certfile
vendordata_dynamic_connect_timeout
vendordata_dynamic_read_timeout

metadata_cache_expiration¶

Type: integer
Default: 15
Minimum Value: 0

This option is the time (in seconds) to cache metadata. When set to 0, metadata caching is disabled entirely; this is generally not recommended for performance reasons. Increasing this setting should improve response times of the metadata API when under heavy load. Higher values may increase memory usage, and result in longer times for host metadata changes to take effect.

Deprecated Variations¶
Group	Name
DEFAULT	metadata_cache_expiration

local_metadata_per_cell¶

Type: boolean
Default: False

Indicates that the nova-metadata API service has been deployed per-cell, so that we can have better performance and data isolation in a multi-cell deployment. Users should consider the use of this configuration depending on how neutron is setup. If you have networks that span cells, you might need to run nova-metadata API service globally. If your networks are segmented along cell boundaries, then you can run nova-metadata API service per cell. When running nova-metadata API service per cell, you should also configure each Neutron metadata-agent to point to the corresponding nova-metadata API service.

dhcp_domain¶

Type: string
Default: novalocal

Domain name used to configure FQDN for instances.

Configure a fully-qualified domain name for instance hostnames. If unset, only the hostname without a domain will be configured.

Possible values:

Any string that is a valid domain name.

Deprecated Variations¶
Group	Name
DEFAULT	dhcp_domain

vendordata_jsonfile_path¶

Type: string
Default: <None>

Cloud providers may store custom data in vendor data file that will then be available to the instances via the metadata service, and to the rendering of config-drive. The default class for this, JsonFileVendorData, loads this information from a JSON file, whose path is configured by this option. If there is no path set by this option, the class returns an empty dictionary.

Note that when using this to provide static vendor data to a configuration drive, the nova-compute service must be configured with this option and the file must be accessible from the nova-compute host.

Possible values:

Any string representing the path to the data file, or an empty string (default).

Deprecated Variations¶
Group	Name
DEFAULT	vendordata_jsonfile_path

max_limit¶

Type: integer
Default: 1000
Minimum Value: 0

As a query can potentially return many thousands of items, you can limit the maximum number of items in a single response by setting this option.

Deprecated Variations¶
Group	Name
DEFAULT	osapi_max_limit

compute_link_prefix¶

Type: string
Default: <None>

This string is prepended to the normal URL that is returned in links to the OpenStack Compute API. If it is empty (the default), the URLs are returned unchanged.

Possible values:

Any string, including an empty string (the default).

Deprecated Variations¶
Group	Name
DEFAULT	osapi_compute_link_prefix

glance_link_prefix¶

Type: string
Default: <None>

This string is prepended to the normal URL that is returned in links to Glance resources. If it is empty (the default), the URLs are returned unchanged.

Possible values:

Any string, including an empty string (the default).

Deprecated Variations¶
Group	Name
DEFAULT	osapi_glance_link_prefix

instance_list_per_project_cells¶

Type: boolean
Default: False

When enabled, this will cause the API to only query cell databases in which the tenant has mapped instances. This requires an additional (fast) query in the API database before each list, but also (potentially) limits the number of cell databases that must be queried to provide the result. If you have a small number of cells, or tenants are likely to have instances in all cells, then this should be False. If you have many cells, especially if you confine tenants to a small subset of those cells, this should be True.

instance_list_cells_batch_strategy¶

Type: string
Default: distributed
Valid Values: distributed, fixed

This controls the method by which the API queries cell databases in smaller batches during large instance list operations. If batching is performed, a large instance list operation will request some fraction of the overall API limit from each cell database initially, and will re-request that same batch size as records are consumed (returned) from each cell as necessary. Larger batches mean less chattiness between the API and the database, but potentially more wasted effort processing the results from the database which will not be returned to the user. Any strategy will yield a batch size of at least 100 records, to avoid a user causing many tiny database queries in their request.

Related options:

instance_list_cells_batch_fixed_size
max_limit

Possible values

distributed: Divide the limit requested by the user by the number of cells in the system. This requires counting the cells in the system initially, which will not be refreshed until service restart or SIGHUP. The actual batch size will be increased by 10% over the result of ($limit / $num_cells).
fixed: Request fixed-size batches from each cell, as defined by instance_list_cells_batch_fixed_size. If the limit is smaller than the batch size, the limit will be used instead. If you do not wish batching to be used at all, setting the fixed size equal to the max_limit value will cause only one request per cell database to be issued.

instance_list_cells_batch_fixed_size¶

Type: integer
Default: 100
Minimum Value: 100

This controls the batch size of instances requested from each cell database if instance_list_cells_batch_strategy` is set to fixed. This integral value will define the limit issued to each cell every time a batch of instances is requested, regardless of the number of cells in the system or any other factors. Per the general logic called out in the documentation for instance_list_cells_batch_strategy, the minimum value for this is 100 records per batch.

Related options:

instance_list_cells_batch_strategy
max_limit

list_records_by_skipping_down_cells¶

Type: boolean
Default: True

When set to False, this will cause the API to return a 500 error if there is an infrastructure failure like non-responsive cells. If you want the API to skip the down cells and return the results from the up cells set this option to True.

Note that from API microversion 2.69 there could be transient conditions in the deployment where certain records are not available and the results could be partial for certain requests containing those records. In those cases this option will be ignored. See “Handling Down Cells” section of the Compute API guide (https://docs.openstack.org/api-guide/compute/down_cells.html) for more information.

use_neutron_default_nets¶

Type: boolean
Default: False

When True, the TenantNetworkController will query the Neutron API to get the default networks to use.

Related options:

neutron_default_tenant_id

Deprecated Variations¶
Group	Name
DEFAULT	use_neutron_default_nets

neutron_default_tenant_id¶

Type: string
Default: default

Tenant ID for getting the default network from Neutron API (also referred in some places as the ‘project ID’) to use.

Related options:

use_neutron_default_nets

Deprecated Variations¶
Group	Name
DEFAULT	neutron_default_tenant_id

enable_instance_password¶

Type: boolean
Default: True

Enables returning of the instance password by the relevant server API calls such as create, rebuild, evacuate, or rescue. If the hypervisor does not support password injection, then the password returned will not be correct, so if your hypervisor does not support password injection, set this to False.

Deprecated Variations¶
Group	Name
DEFAULT	enable_instance_password

api_database¶

The Nova API Database is a separate database which is used for information which is used across cells. This database is mandatory since the Mitaka release (13.0.0).

This group should not be configured for the nova-compute service.

connection¶

Type: string
Default: <None>

The SQLAlchemy connection string to use to connect to the database. Do not set this for the nova-compute service.

connection_parameters¶

Type: string
Default: ''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

sqlite_synchronous¶

Type: boolean
Default: True

If True, SQLite uses synchronous mode.

slave_connection¶

Type: string
Default: <None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode¶

Type: string
Default: TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

connection_recycle_time¶

Type: integer
Default: 3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

Deprecated Variations¶
Group	Name
api_database	idle_timeout

max_pool_size¶

Type: integer
Default: <None>

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries¶

Type: integer
Default: 10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

retry_interval¶

Type: integer
Default: 10

Interval between retries of opening a SQL connection.

max_overflow¶

Type: integer
Default: <None>

If set, use this value for max_overflow with SQLAlchemy.

connection_debug¶

Type: integer
Default: 0

Verbosity of SQL debugging information: 0=None, 100=Everything.

connection_trace¶

Type: boolean
Default: False

Add Python stack traces to SQL as comment strings.

pool_timeout¶

Type: integer
Default: <None>

If set, use this value for pool_timeout with SQLAlchemy.

barbican¶

barbican_endpoint¶

Type: string
Default: <None>

Use this endpoint to connect to Barbican, for example: “http://localhost:9311/”

barbican_api_version¶

Type: string
Default: <None>

Version of the Barbican API, for example: “v1”

auth_endpoint¶

Type: string
Default: http://localhost/identity/v3

Use this endpoint to connect to Keystone

Deprecated Variations¶
Group	Name
key_manager	auth_url

retry_delay¶

Type: integer
Default: 1

Number of seconds to wait before retrying poll for key creation completion

number_of_retries¶

Type: integer
Default: 60

Number of times to retry poll for key creation completion

verify_ssl¶

Type: boolean
Default: True

Specifies if insecure TLS (https) requests. If False, the server’s certificate will not be validated, if True, we can set the verify_ssl_path config meanwhile.

verify_ssl_path¶

Type: string
Default: <None>

A path to a bundle or CA certs to check against, or None for requests to attempt to locate and use certificates which verify_ssh is True. If verify_ssl is False, this is ignored.

barbican_endpoint_type¶

Type: string
Default: public
Valid Values: public, internal, admin

Specifies the type of endpoint. Allowed values are: public, private, and admin

cache¶

config_prefix¶

Type: string
Default: cache.oslo

Prefix for building the configuration dictionary for the cache region. This should not need to be changed unless there is another dogpile.cache region with the same configuration name.

expiration_time¶

Type: integer
Default: 600

Default TTL, in seconds, for any cached item in the dogpile.cache region. This applies to any cached method that doesn’t have an explicit cache expiration time defined for it.

backend¶

Type: string
Default: dogpile.cache.null
Valid Values: oslo_cache.memcache_pool, oslo_cache.dict, oslo_cache.mongo, oslo_cache.etcd3gw, dogpile.cache.pymemcache, dogpile.cache.memcached, dogpile.cache.pylibmc, dogpile.cache.bmemcached, dogpile.cache.dbm, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.memory_pickle, dogpile.cache.null

Cache backend module. For eventlet-based or environments with hundreds of threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is recommended. For environments with less than 100 threaded servers, Memcached (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test environments with a single instance of the server can use the dogpile.cache.memory backend.

backend_argument¶

Type: multi-valued
Default: ''

Arguments supplied to the backend module. Specify this option once per argument to be passed to the dogpile.cache backend. Example format: “<argname>:<value>”.

proxies¶

Type: list
Default: []

Proxy classes to import that will affect the way the dogpile.cache backend functions. See the dogpile.cache documentation on changing-backend-behavior.

enabled¶

Type: boolean
Default: False

Global toggle for caching.

debug_cache_backend¶

Type: boolean
Default: False

Extra debugging from the cache backend (cache keys, get/set/delete/etc calls). This is only really useful if you need to see the specific cache-backend get/set/delete calls with the keys/values. Typically this should be left set to false.

memcache_servers¶

Type: list
Default: ['localhost:11211']

Memcache servers in the format of “host:port”. (dogpile.cache.memcached and oslo_cache.memcache_pool backends only). If a given host refer to an IPv6 or a given domain refer to IPv6 then you should prefix the given address with the address family (inet6) (e.g inet6[::1]:11211, inet6:[fd12:3456:789a:1::1]:11211, inet6:[controller-0.internalapi]:11211). If the address family is not given then default address family used will be inet which correspond to IPv4

memcache_dead_retry¶

Type: integer
Default: 300

Number of seconds memcached server is considered dead before it is tried again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_socket_timeout¶

Type: floating point
Default: 1.0

Timeout in seconds for every call to a server. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_pool_maxsize¶

Type: integer
Default: 10

Max total number of open connections to every memcached server. (oslo_cache.memcache_pool backend only).

memcache_pool_unused_timeout¶

Type: integer
Default: 60

Number of seconds a connection to memcached is held unused in the pool before it is closed. (oslo_cache.memcache_pool backend only).

memcache_pool_connection_get_timeout¶

Type: integer
Default: 10

Number of seconds that an operation will wait to get a memcache client connection.

memcache_pool_flush_on_reconnect¶

Type: boolean
Default: False

Global toggle if memcache will be flushed on reconnect. (oslo_cache.memcache_pool backend only).

tls_enabled¶

Type: boolean
Default: False

Global toggle for TLS usage when comunicating with the caching servers.

tls_cafile¶

Type: string
Default: <None>

Path to a file of concatenated CA certificates in PEM format necessary to establish the caching servers’ authenticity. If tls_enabled is False, this option is ignored.

tls_certfile¶

Type: string
Default: <None>

Path to a single file in PEM format containing the client’s certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. This file is only required when client side authentication is necessary. If tls_enabled is False, this option is ignored.

tls_keyfile¶

Type: string
Default: <None>

Path to a single file containing the client’s private key in. Otherwhise the private key will be taken from the file specified in tls_certfile. If tls_enabled is False, this option is ignored.

tls_allowed_ciphers¶

Type: string
Default: <None>

Set the available ciphers for sockets created with the TLS context. It should be a string in the OpenSSL cipher list format. If not specified, all OpenSSL enabled ciphers will be available.

enable_socket_keepalive¶

Type: boolean
Default: False

Global toggle for the socket keepalive of dogpile’s pymemcache backend

socket_keepalive_idle¶

Type: integer
Default: 1
Minimum Value: 0

The time (in seconds) the connection needs to remain idle before TCP starts sending keepalive probes. Should be a positive integer most greater than zero.

socket_keepalive_interval¶

Type: integer
Default: 1
Minimum Value: 0

The time (in seconds) between individual keepalive probes. Should be a positive integer greater than zero.

socket_keepalive_count¶

Type: integer
Default: 1
Minimum Value: 0

The maximum number of keepalive probes TCP should send before dropping the connection. Should be a positive integer greater than zero.

enable_retry_client¶

Type: boolean
Default: False

Enable retry client mechanisms to handle failure. Those mechanisms can be used to wrap all kind of pymemcache clients. The wrapper allows you to define how many attempts to make and how long to wait between attemots.

retry_attempts¶

Type: integer
Default: 2
Minimum Value: 1

Number of times to attempt an action before failing.

retry_delay¶

Type: floating point
Default: 0

Number of seconds to sleep between each attempt.

hashclient_retry_attempts¶

Type: integer
Default: 2
Minimum Value: 1

Amount of times a client should be tried before it is marked dead and removed from the pool in the HashClient’s internal mechanisms.

hashclient_retry_delay¶

Type: floating point
Default: 1

Time in seconds that should pass between retry attempts in the HashClient’s internal mechanisms.

dead_timeout¶

Type: floating point
Default: 60

Time in seconds before attempting to add a node back in the pool in the HashClient’s internal mechanisms.

cinder¶

catalog_info¶

Type: string
Default: volumev3::publicURL

Info to match when looking for cinder in the service catalog.

The <service_name> is optional and omitted by default since it should not be necessary in most deployments.

Possible values:

Format is separated values of the form: <service_type>:<service_name>:<endpoint_type>

Note: Nova does not support the Cinder v2 API since the Nova 17.0.0 Queens release.

Related options:

endpoint_template - Setting this option will override catalog_info

endpoint_template¶

Type: string
Default: <None>

If this option is set then it will override service catalog lookup with this template for cinder endpoint

Possible values:

URL for cinder endpoint API e.g. http://localhost:8776/v3/%(project_id)s

Note: Nova does not support the Cinder v2 API since the Nova 17.0.0 Queens release.

Related options:

catalog_info - If endpoint_template is not set, catalog_info will be used.

os_region_name¶

Type: string
Default: <None>

Region name of this node. This is used when picking the URL in the service catalog.

Possible values:

Any string representing region name

http_retries¶

Type: integer
Default: 3
Minimum Value: 0

Number of times cinderclient should retry on any failed http call. 0 means connection is attempted only once. Setting it to any positive integer means that on failure connection is retried that many times e.g. setting it to 3 means total attempts to connect will be 4.

Possible values:

Any integer value. 0 means connection is attempted only once

cross_az_attach¶

Type: boolean
Default: True

Allow attach between instance and volume in different availability zones.

If False, volumes attached to an instance must be in the same availability zone in Cinder as the instance availability zone in Nova.

This also means care should be taken when booting an instance from a volume where source is not “volume” because Nova will attempt to create a volume using the same availability zone as what is assigned to the instance.

If that AZ is not in Cinder (or allow_availability_zone_fallback=False in cinder.conf), the volume create request will fail and the instance will fail the build request.

By default there is no availability zone restriction on volume attach.

Related options:

[DEFAULT]/default_schedule_zone

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
cinder	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

auth_url¶

Type: unknown type
Default: <None>

Authentication URL

system_scope¶

Type: unknown type
Default: <None>

Scope for system operations

domain_id¶

Type: unknown type
Default: <None>

Domain ID to scope to

domain_name¶

Type: unknown type
Default: <None>

Domain name to scope to

project_id¶

Type: unknown type
Default: <None>

Project ID to scope to

project_name¶

Type: unknown type
Default: <None>

Project name to scope to

project_domain_id¶

Type: unknown type
Default: <None>

Domain ID containing project

project_domain_name¶

Type: unknown type
Default: <None>

Domain name containing project

trust_id¶

Type: unknown type
Default: <None>

Trust ID

default_domain_id¶

Type: unknown type
Default: <None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name¶

Type: unknown type
Default: <None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

user_id¶

Type: unknown type
Default: <None>

User ID

username¶

Type: unknown type
Default: <None>

Username

Deprecated Variations¶
Group	Name
cinder	user-name
cinder	user_name

user_domain_id¶

Type: unknown type
Default: <None>

User’s domain id

user_domain_name¶

Type: unknown type
Default: <None>

User’s domain name

password¶

Type: unknown type
Default: <None>

User’s password

tenant_id¶

Type: unknown type
Default: <None>

Tenant ID

tenant_name¶

Type: unknown type
Default: <None>

Tenant Name

compute¶

consecutive_build_service_disable_threshold¶

Type: integer
Default: 10

Enables reporting of build failures to the scheduler.

Any nonzero value will enable sending build failure statistics to the scheduler for use by the BuildFailureWeigher.

Possible values:

Any positive integer enables reporting build failures.
Zero to disable reporting build failures.

Related options:

[filter_scheduler]/build_failure_weight_multiplier

shutdown_retry_interval¶

Type: integer
Default: 10
Minimum Value: 1

Time to wait in seconds before resending an ACPI shutdown signal to instances.

The overall time to wait is set by shutdown_timeout.

Possible values:

Any integer greater than 0 in seconds

Related options:

shutdown_timeout

resource_provider_association_refresh¶

Type: integer
Default: 300
Minimum Value: 0
Mutable: This option can be changed without restarting.

Interval for updating nova-compute-side cache of the compute node resource provider’s inventories, aggregates, and traits.

This option specifies the number of seconds between attempts to update a provider’s inventories, aggregates and traits in the local cache of the compute node.

A value of zero disables cache refresh completely.

The cache can be cleared manually at any time by sending SIGHUP to the compute process, causing it to be repopulated the next time the data is accessed.

Possible values:

Any positive integer in seconds, or zero to disable refresh.

cpu_shared_set¶

Type: string
Default: <None>

Mask of host CPUs that can be used for VCPU resources and offloaded emulator threads.

The behavior of this option depends on the definition of the deprecated vcpu_pin_set option.

If vcpu_pin_set is not defined, [compute] cpu_shared_set will be be used to provide VCPU inventory and to determine the host CPUs that unpinned instances can be scheduled to. It will also be used to determine the host CPUS that instance emulator threads should be offloaded to for instances configured with the share emulator thread policy (hw:emulator_threads_policy=share).
If vcpu_pin_set is defined, [compute] cpu_shared_set will only be used to determine the host CPUs that instance emulator threads should be offloaded to for instances configured with the share emulator thread policy (hw:emulator_threads_policy=share). vcpu_pin_set will be used to provide VCPU inventory and to determine the host CPUs that both pinned and unpinned instances can be scheduled to.

This behavior will be simplified in a future release when vcpu_pin_set is removed.

Possible values:

A comma-separated list of physical CPU numbers that instance VCPUs can be allocated from. Each element should be either a single CPU number, a range of CPU numbers, or a caret followed by a CPU number to be excluded from a previous range. For example:
```
cpu_shared_set = "4-12,^8,15"
```

Related options:

[compute] cpu_dedicated_set: This is the counterpart option for defining where PCPU resources should be allocated from.
vcpu_pin_set: A legacy option whose definition may change the behavior of this option.

cpu_dedicated_set¶

Type: string
Default: <None>

Mask of host CPUs that can be used for PCPU resources.

The behavior of this option affects the behavior of the deprecated vcpu_pin_set option.

If this option is defined, defining vcpu_pin_set will result in an error.
If this option is not defined, vcpu_pin_set will be used to determine inventory for VCPU resources and to limit the host CPUs that both pinned and unpinned instances can be scheduled to.

This behavior will be simplified in a future release when vcpu_pin_set is removed.

Possible values:

A comma-separated list of physical CPU numbers that instance VCPUs can be allocated from. Each element should be either a single CPU number, a range of CPU numbers, or a caret followed by a CPU number to be excluded from a previous range. For example:
```
cpu_dedicated_set = "4-12,^8,15"
```

Related options:

[compute] cpu_shared_set: This is the counterpart option for defining where VCPU resources should be allocated from.
vcpu_pin_set: A legacy option that this option partially replaces.

live_migration_wait_for_vif_plug¶

Type: boolean
Default: True

Determine if the source compute host should wait for a network-vif-plugged event from the (neutron) networking service before starting the actual transfer of the guest to the destination compute host.

Note that this option is read on the destination host of a live migration. If you set this option the same on all of your compute hosts, which you should do if you use the same networking backend universally, you do not have to worry about this.

Before starting the transfer of the guest, some setup occurs on the destination compute host, including plugging virtual interfaces. Depending on the networking backend on the destination host, a network-vif-plugged event may be triggered and then received on the source compute host and the source compute can wait for that event to ensure networking is set up on the destination host before starting the guest transfer in the hypervisor.

Note

The compute service cannot reliably determine which types of virtual interfaces (port.binding:vif_type) will send network-vif-plugged events without an accompanying port binding:host_id change. Open vSwitch and linuxbridge should be OK, but OpenDaylight is at least one known backend that will not currently work in this case, see bug https://launchpad.net/bugs/1755890 for more details.

Possible values:

True: wait for network-vif-plugged events before starting guest transfer
False: do not wait for network-vif-plugged events before starting guest transfer (this is the legacy behavior)

Related options:

[DEFAULT]/vif_plugging_is_fatal: if live_migration_wait_for_vif_plug is True and vif_plugging_timeout is greater than 0, and a timeout is reached, the live migration process will fail with an error but the guest transfer will not have started to the destination host
[DEFAULT]/vif_plugging_timeout: if live_migration_wait_for_vif_plug is True, this controls the amount of time to wait before timing out and either failing if vif_plugging_is_fatal is True, or simply continuing with the live migration

max_concurrent_disk_ops¶

Type: integer
Default: 0
Minimum Value: 0

Number of concurrent disk-IO-intensive operations (glance image downloads, image format conversions, etc.) that we will do in parallel. If this is set too high then response time suffers. The default value of 0 means no limit.

max_disk_devices_to_attach¶

Type: integer
Default: -1
Minimum Value: -1

Maximum number of disk devices allowed to attach to a single server. Note that the number of disks supported by an server depends on the bus used. For example, the ide disk bus is limited to 4 attached devices. The configured maximum is enforced during server create, rebuild, evacuate, unshelve, live migrate, and attach volume.

Usually, disk bus is determined automatically from the device type or disk device, and the virtualization type. However, disk bus can also be specified via a block device mapping or an image property. See the disk_bus field in Block Device Mapping in Nova for more information about specifying disk bus in a block device mapping, and see https://docs.openstack.org/glance/latest/admin/useful-image-properties.html for more information about the hw_disk_bus image property.

Operators changing the [compute]/max_disk_devices_to_attach on a compute service that is hosting servers should be aware that it could cause rebuilds to fail, if the maximum is decreased lower than the number of devices already attached to servers. For example, if server A has 26 devices attached and an operators changes [compute]/max_disk_devices_to_attach to 20, a request to rebuild server A will fail and go into ERROR state because 26 devices are already attached and exceed the new configured maximum of 20.

Operators setting [compute]/max_disk_devices_to_attach should also be aware that during a cold migration, the configured maximum is only enforced in-place and the destination is not checked before the move. This means if an operator has set a maximum of 26 on compute host A and a maximum of 20 on compute host B, a cold migration of a server with 26 attached devices from compute host A to compute host B will succeed. Then, once the server is on compute host B, a subsequent request to rebuild the server will fail and go into ERROR state because 26 devices are already attached and exceed the configured maximum of 20 on compute host B.

The configured maximum is not enforced on shelved offloaded servers, as they have no compute host.

Warning

If this option is set to 0, the nova-compute service will fail to start, as 0 disk devices is an invalid configuration that would prevent instances from being able to boot.

Possible values:

-1 means unlimited
Any integer >= 1 represents the maximum allowed. A value of 0 will cause the nova-compute service to fail to start, as 0 disk devices is an invalid configuration that would prevent instances from being able to boot.

provider_config_location¶

Type: string
Default: /etc/nova/provider_config/

Location of YAML files containing resource provider configuration data.

These files allow the operator to specify additional custom inventory and traits to assign to one or more resource providers.

Additional documentation is available here:

https://docs.openstack.org/nova/latest/admin/managing-resource-providers.html

image_type_exclude_list¶

Type: list
Default: []

A list of image formats that should not be advertised as supported by this compute node.

In some situations, it may be desirable to have a compute node refuse to support an expensive or complex image format. This factors into the decisions made by the scheduler about which compute node to select when booted with a given image.

Possible values:

Any glance image disk_format name (i.e. raw, qcow2, etc)

Related options:

[scheduler]query_placement_for_image_type_support - enables filtering computes based on supported image types, which is required to be enabled for this to take effect.

vmdk_allowed_types¶

Type: list
Default: ['streamOptimized', 'monolithicSparse']

A list of strings describing allowed VMDK “create-type” subformats that will be allowed. This is recommended to only include single-file-with-sparse-header variants to avoid potential host file exposure due to processing named extents. If this list is empty, then no form of VMDK image will be allowed.

conductor¶

Options under this group are used to define Conductor’s communication, which manager should be act as a proxy between computes and database, and finally, how many worker processes will be used.

workers¶

Type: integer
Default: <None>

Number of workers for OpenStack Conductor service. The default will be the number of CPUs available.

console¶

Options under this group allow to tune the configuration of the console proxy service.

Note: in configuration of every compute is a console_host option, which allows to select the console proxy service to connect to.

allowed_origins¶

Type: list
Default: []

Adds list of allowed origins to the console websocket proxy to allow connections from other origin hostnames. Websocket proxy matches the host header with the origin header to prevent cross-site requests. This list specifies if any there are values other than host are allowed in the origin header.

Possible values:

A list where each element is an allowed origin hostnames, else an empty list

Deprecated Variations¶
Group	Name
DEFAULT	console_allowed_origins

ssl_ciphers¶

Type: string
Default: <None>

OpenSSL cipher preference string that specifies what ciphers to allow for TLS connections from clients. For example:

ssl_ciphers = "kEECDH+aECDSA+AES:kEECDH+AES+aRSA:kEDH+aRSA+AES"

See the man page for the OpenSSL ciphers command for details of the cipher preference string format and allowed values:

https://www.openssl.org/docs/man1.1.0/man1/ciphers.html

Related options:

[DEFAULT] cert
[DEFAULT] key

ssl_minimum_version¶

Type: string
Default: default
Valid Values: default, tlsv1_1, tlsv1_2, tlsv1_3

Minimum allowed SSL/TLS protocol version.

Related options:

[DEFAULT] cert
[DEFAULT] key

Possible values

default: Use the underlying system OpenSSL defaults
tlsv1_1: Require TLS v1.1 or greater for TLS connections
tlsv1_2: Require TLS v1.2 or greater for TLS connections
tlsv1_3: Require TLS v1.3 or greater for TLS connections

consoleauth¶

token_ttl¶

Type: integer
Default: 600
Minimum Value: 0

The lifetime of a console auth token (in seconds).

A console auth token is used in authorizing console access for a user. Once the auth token time to live count has elapsed, the token is considered expired. Expired tokens are then deleted.

Deprecated Variations¶
Group	Name
DEFAULT	console_token_ttl

cors¶

allowed_origin¶

Type: list
Default: <None>

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials¶

Type: boolean
Default: True

Indicate that the actual request can include user credentials

expose_headers¶

Type: list
Default: ['X-Auth-Token', 'X-Openstack-Request-Id', 'X-Subject-Token', 'X-Service-Token', 'X-OpenStack-Nova-API-Version', 'OpenStack-API-Version']

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age¶

Type: integer
Default: 3600

Maximum cache age of CORS preflight requests.

allow_methods¶

Type: list
Default: ['GET', 'PUT', 'POST', 'DELETE', 'PATCH']

Indicate which methods can be used during the actual request.

allow_headers¶

Type: list
Default: ['X-Auth-Token', 'X-Openstack-Request-Id', 'X-Identity-Status', 'X-Roles', 'X-Service-Catalog', 'X-User-Id', 'X-Tenant-Id', 'X-OpenStack-Nova-API-Version', 'OpenStack-API-Version']

Indicate which header field names may be used during the actual request.

cyborg¶

Configuration options for Cyborg (accelerator as a service).

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

service_type¶

Type: string
Default: accelerator

The default service_type for endpoint URL discovery.

service_name¶

Type: string
Default: <None>

The default service_name for endpoint URL discovery.

valid_interfaces¶

Type: list
Default: ['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

region_name¶

Type: string
Default: <None>

The default region_name for endpoint URL discovery.

endpoint_override¶

Type: string
Default: <None>

Always use this endpoint URL for requests for this client. NOTE: The unversioned endpoint should be specified here; to request a particular API version, use the version, min-version, and/or max-version options.

connect_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

status_code_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

database¶

sqlite_synchronous¶

Type: boolean
Default: True

If True, SQLite uses synchronous mode.

Deprecated Variations¶
Group	Name
DEFAULT	sqlite_synchronous

backend¶

Type: string
Default: sqlalchemy

The back end to use for the database.

Deprecated Variations¶
Group	Name
DEFAULT	db_backend

connection¶

Type: string
Default: <None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations¶
Group	Name
DEFAULT	sql_connection
DATABASE	sql_connection
sql	connection

slave_connection¶

Type: string
Default: <None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode¶

Type: string
Default: TRADITIONAL

mysql_enable_ndb¶

Type: boolean
Default: False

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time¶

Type: integer
Default: 3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

Deprecated Variations¶
Group	Name
DATABASE	idle_timeout
database	idle_timeout
DEFAULT	sql_idle_timeout
DATABASE	sql_idle_timeout
sql	idle_timeout

max_pool_size¶

Type: integer
Default: 5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

Deprecated Variations¶
Group	Name
DEFAULT	sql_max_pool_size
DATABASE	sql_max_pool_size

max_retries¶

Type: integer
Default: 10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations¶
Group	Name
DEFAULT	sql_max_retries
DATABASE	sql_max_retries

retry_interval¶

Type: integer
Default: 10

Interval between retries of opening a SQL connection.

Deprecated Variations¶
Group	Name
DEFAULT	sql_retry_interval
DATABASE	reconnect_interval

max_overflow¶

Type: integer
Default: 50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations¶
Group	Name
DEFAULT	sql_max_overflow
DATABASE	sqlalchemy_max_overflow

connection_debug¶

Type: integer
Default: 0
Minimum Value: 0
Maximum Value: 100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations¶
Group	Name
DEFAULT	sql_connection_debug

connection_trace¶

Type: boolean
Default: False

Add Python stack traces to SQL as comment strings.

Deprecated Variations¶
Group	Name
DEFAULT	sql_connection_trace

pool_timeout¶

Type: integer
Default: <None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations¶
Group	Name
DATABASE	sqlalchemy_pool_timeout

use_db_reconnect¶

Type: boolean
Default: False

Enable the experimental use of database reconnect on connection lost.

db_retry_interval¶

Type: integer
Default: 1

Seconds between retries of a database transaction.

db_inc_retry_interval¶

Type: boolean
Default: True

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval¶

Type: integer
Default: 10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries¶

Type: integer
Default: 20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters¶

Type: string
Default: ''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

use_tpool¶

Type: boolean
Default: False

Enable the experimental use of thread pooling for all DB API calls

Deprecated Variations¶
Group	Name
DEFAULT	dbapi_use_tpool

devices¶

enabled_vgpu_types¶

Type: list
Default: []

The vGPU types enabled in the compute node.

Some pGPUs (e.g. NVIDIA GRID K1) support different vGPU types. User can use this option to specify a list of enabled vGPU types that may be assigned to a guest instance.

If more than one single vGPU type is provided, then for each vGPU type an additional section, [vgpu_$(VGPU_TYPE)], must be added to the configuration file. Each section then must be configured with a single configuration option, device_addresses, which should be a list of PCI addresses corresponding to the physical GPU(s) to assign to this type.

If one or more sections are missing (meaning that a specific type is not wanted to use for at least one physical GPU) or if no device addresses are provided, then Nova will only use the first type that was provided by [devices]/enabled_vgpu_types.

If the same PCI address is provided for two different types, nova-compute will return an InvalidLibvirtGPUConfig exception at restart.

An example is as the following:

[devices]
enabled_vgpu_types = nvidia-35, nvidia-36

[vgpu_nvidia-35]
device_addresses = 0000:84:00.0,0000:85:00.0

[vgpu_nvidia-36]
device_addresses = 0000:86:00.0

ephemeral_storage_encryption¶

enabled¶

Type: boolean
Default: False

Enables/disables LVM ephemeral storage encryption.

cipher¶

Type: string
Default: aes-xts-plain64

Cipher-mode string to be used.

The cipher and mode to be used to encrypt ephemeral storage. The set of cipher-mode combinations available depends on kernel support. According to the dm-crypt documentation, the cipher is expected to be in the format: “<cipher>-<chainmode>-<ivmode>”.

Possible values:

Any crypto option listed in /proc/crypto.

key_size¶

Type: integer
Default: 512
Minimum Value: 1

Encryption key length in bits.

The bit length of the encryption key to be used to encrypt ephemeral storage. In XTS mode only half of the bits are used for encryption key.

filter_scheduler¶

host_subset_size¶

Type: integer
Default: 1
Minimum Value: 1

Size of subset of best hosts selected by scheduler.

New instances will be scheduled on a host chosen randomly from a subset of the N best hosts, where N is the value set by this option.

Setting this to a value greater than 1 will reduce the chance that multiple scheduler processes handling similar requests will select the same host, creating a potential race condition. By selecting a host randomly from the N hosts that best fit the request, the chance of a conflict is reduced. However, the higher you set this value, the less optimal the chosen host may be for a given request.

Possible values:

An integer, where the integer corresponds to the size of a host subset.

Deprecated Variations¶
Group	Name
DEFAULT	scheduler_host_subset_size

max_io_ops_per_host¶

Type: integer
Default: 8
Minimum Value: 0

The number of instances that can be actively performing IO on a host.

Instances performing IO includes those in the following states: build, resize, snapshot, migrate, rescue, unshelve.

Note that this setting only affects scheduling if the IoOpsFilter filter is enabled.

Possible values:

An integer, where the integer corresponds to the max number of instances that can be actively performing IO on any given host.

Related options:

[filter_scheduler] enabled_filters

Deprecated Variations¶
Group	Name
DEFAULT	max_io_ops_per_host

max_instances_per_host¶

Type: integer
Default: 50
Minimum Value: 1

Maximum number of instances that can exist on a host.

If you need to limit the number of instances on any given host, set this option to the maximum number of instances you want to allow. The NumInstancesFilter and AggregateNumInstancesFilter will reject any host that has at least as many instances as this option’s value.

Note that this setting only affects scheduling if the NumInstancesFilter or AggregateNumInstancesFilter filter is enabled.

Possible values:

An integer, where the integer corresponds to the max instances that can be scheduled on a host.

Related options:

[filter_scheduler] enabled_filters

Deprecated Variations¶
Group	Name
DEFAULT	max_instances_per_host

track_instance_changes¶

Type: boolean
Default: True

Enable querying of individual hosts for instance information.

The scheduler may need information about the instances on a host in order to evaluate its filters and weighers. The most common need for this information is for the (anti-)affinity filters, which need to choose a host based on the instances already running on a host.

If the configured filters and weighers do not need this information, disabling this option will improve performance. It may also be disabled when the tracking overhead proves too heavy, although this will cause classes requiring host usage data to query the database on each request instead.

Note

In a multi-cell (v2) setup where the cell MQ is separated from the top-level, computes cannot directly communicate with the scheduler. Thus, this option cannot be enabled in that scenario. See also the [workarounds] disable_group_policy_check_upcall option.

Related options:

[filter_scheduler] enabled_filters
[workarounds] disable_group_policy_check_upcall

Deprecated Variations¶
Group	Name
DEFAULT	scheduler_tracks_instance_changes

available_filters¶

Type: multi-valued
Default: nova.scheduler.filters.all_filters

Filters that the scheduler can use.

An unordered list of the filter classes the nova scheduler may apply. Only the filters specified in the [filter_scheduler] enabled_filters option will be used, but any filter appearing in that option must also be included in this list.

By default, this is set to all filters that are included with nova.

Possible values:

A list of zero or more strings, where each string corresponds to the name of a filter that may be used for selecting a host

Related options:

[filter_scheduler] enabled_filters

Deprecated Variations¶
Group	Name
DEFAULT	scheduler_available_filters

enabled_filters¶

Type: list
Default: ['AvailabilityZoneFilter', 'ComputeFilter', 'ComputeCapabilitiesFilter', 'ImagePropertiesFilter', 'ServerGroupAntiAffinityFilter', 'ServerGroupAffinityFilter']

Filters that the scheduler will use.

An ordered list of filter class names that will be used for filtering hosts. These filters will be applied in the order they are listed so place your most restrictive filters first to make the filtering process more efficient.

All of the filters in this option must be present in the [scheduler_filter] available_filter option, or a SchedulerHostFilterNotFound exception will be raised.

Possible values:

A list of zero or more strings, where each string corresponds to the name of a filter to be used for selecting a host

Related options:

[filter_scheduler] available_filters

Deprecated Variations¶
Group	Name
DEFAULT	scheduler_default_filters

weight_classes¶

Type: list
Default: ['nova.scheduler.weights.all_weighers']

Weighers that the scheduler will use.

Only hosts which pass the filters are weighed. The weight for any host starts at 0, and the weighers order these hosts by adding to or subtracting from the weight assigned by the previous weigher. Weights may become negative. An instance will be scheduled to one of the N most-weighted hosts, where N is [filter_scheduler] host_subset_size.

By default, this is set to all weighers that are included with Nova.

Possible values:

A list of zero or more strings, where each string corresponds to the name of a weigher that will be used for selecting a host

Deprecated Variations¶
Group	Name
DEFAULT	scheduler_weight_classes

ram_weight_multiplier¶

Type: floating point
Default: 1.0

RAM weight multipler ratio.

This option determines how hosts with more or less available RAM are weighed. A positive value will result in the scheduler preferring hosts with more available RAM, and a negative number will result in the scheduler preferring hosts with less available RAM. Another way to look at it is that positive values for this option will tend to spread instances across many hosts, while negative values will tend to fill up (stack) hosts as much as possible before scheduling to a less-used host. The absolute value, whether positive or negative, controls how strong the RAM weigher is relative to other weighers.

Note that this setting only affects scheduling if the RAMWeigher weigher is enabled.

Possible values:

An integer or float value, where the value corresponds to the multipler ratio for this weigher.

Related options:

[filter_scheduler] weight_classes

Deprecated Variations¶
Group	Name
DEFAULT	ram_weight_multiplier

cpu_weight_multiplier¶

Type: floating point
Default: 1.0

CPU weight multiplier ratio.

Multiplier used for weighting free vCPUs. Negative numbers indicate stacking rather than spreading.

Note that this setting only affects scheduling if the CPUWeigher weigher is enabled.

Possible values:

An integer or float value, where the value corresponds to the multipler ratio for this weigher.

Related options:

[filter_scheduler] weight_classes

disk_weight_multiplier¶

Type: floating point
Default: 1.0

Disk weight multipler ratio.

Multiplier used for weighing free disk space. Negative numbers mean to stack vs spread.

Note that this setting only affects scheduling if the DiskWeigher weigher is enabled.

Possible values:

An integer or float value, where the value corresponds to the multipler ratio for this weigher.

Deprecated Variations¶
Group	Name
DEFAULT	disk_weight_multiplier

io_ops_weight_multiplier¶

Type: floating point
Default: -1.0

IO operations weight multipler ratio.

This option determines how hosts with differing workloads are weighed. Negative values, such as the default, will result in the scheduler preferring hosts with lighter workloads whereas positive values will prefer hosts with heavier workloads. Another way to look at it is that positive values for this option will tend to schedule instances onto hosts that are already busy, while negative values will tend to distribute the workload across more hosts. The absolute value, whether positive or negative, controls how strong the io_ops weigher is relative to other weighers.

Note that this setting only affects scheduling if the IoOpsWeigher weigher is enabled.

Possible values:

An integer or float value, where the value corresponds to the multipler ratio for this weigher.

Related options:

[filter_scheduler] weight_classes

Deprecated Variations¶
Group	Name
DEFAULT	io_ops_weight_multiplier

pci_weight_multiplier¶

Type: floating point
Default: 1.0
Minimum Value: 0.0

PCI device affinity weight multiplier.

The PCI device affinity weighter computes a weighting based on the number of PCI devices on the host and the number of PCI devices requested by the instance.

Note that this setting only affects scheduling if the PCIWeigher weigher and NUMATopologyFilter filter are enabled.

Possible values:

A positive integer or float value, where the value corresponds to the multiplier ratio for this weigher.

Related options:

[filter_scheduler] weight_classes

soft_affinity_weight_multiplier¶

Type: floating point
Default: 1.0
Minimum Value: 0.0

Multiplier used for weighing hosts for group soft-affinity.

Note that this setting only affects scheduling if the ServerGroupSoftAffinityWeigher weigher is enabled.

Possible values:

A non-negative integer or float value, where the value corresponds to weight multiplier for hosts with group soft affinity.

Related options:

[filter_scheduler] weight_classes

soft_anti_affinity_weight_multiplier¶

Type: floating point
Default: 1.0
Minimum Value: 0.0

Multiplier used for weighing hosts for group soft-anti-affinity.

Note that this setting only affects scheduling if the ServerGroupSoftAntiAffinityWeigher weigher is enabled.

Possible values:

A non-negative integer or float value, where the value corresponds to weight multiplier for hosts with group soft anti-affinity.

Related options:

[filter_scheduler] weight_classes

build_failure_weight_multiplier¶

Type: floating point
Default: 1000000.0

Multiplier used for weighing hosts that have had recent build failures.

This option determines how much weight is placed on a compute node with recent build failures. Build failures may indicate a failing, misconfigured, or otherwise ailing compute node, and avoiding it during scheduling may be beneficial. The weight is inversely proportional to the number of recent build failures the compute node has experienced. This value should be set to some high value to offset weight given by other enabled weighers due to available resources. To disable weighing compute hosts by the number of recent failures, set this to zero.

Note that this setting only affects scheduling if the BuildFailureWeigher weigher is enabled.

Possible values:

An integer or float value, where the value corresponds to the multiplier ratio for this weigher.

Related options:

[compute] consecutive_build_service_disable_threshold - Must be nonzero for a compute to report data considered by this weigher.
[filter_scheduler] weight_classes

cross_cell_move_weight_multiplier¶

Type: floating point
Default: 1000000.0

Multiplier used for weighing hosts during a cross-cell move.

This option determines how much weight is placed on a host which is within the same source cell when moving a server, for example during cross-cell resize. By default, when moving an instance, the scheduler will prefer hosts within the same cell since cross-cell move operations can be slower and riskier due to the complicated nature of cross-cell migrations.

Note that this setting only affects scheduling if the CrossCellWeigher weigher is enabled. If your cloud is not configured to support cross-cell migrations, then this option has no effect.

The value of this configuration option can be overridden per host aggregate by setting the aggregate metadata key with the same name (cross_cell_move_weight_multiplier).

Possible values:

An integer or float value, where the value corresponds to the multiplier ratio for this weigher. Positive values mean the weigher will prefer hosts within the same cell in which the instance is currently running. Negative values mean the weigher will prefer hosts in other cells from which the instance is currently running.

Related options:

[filter_scheduler] weight_classes

shuffle_best_same_weighed_hosts¶

Type: boolean
Default: False

Enable spreading the instances between hosts with the same best weight.

Enabling it is beneficial for cases when [filter_scheduler] host_subset_size is 1 (default), but there is a large number of hosts with same maximal weight. This scenario is common in Ironic deployments where there are typically many baremetal nodes with identical weights returned to the scheduler. In such case enabling this option will reduce contention and chances for rescheduling events. At the same time it will make the instance packing (even in unweighed case) less dense.

image_properties_default_architecture¶

Type: string
Default: <None>
Valid Values: alpha, armv6, armv7l, armv7b, aarch64, cris, i686, ia64, lm32, m68k, microblaze, microblazeel, mips, mipsel, mips64, mips64el, openrisc, parisc, parisc64, ppc, ppcle, ppc64, ppc64le, ppcemb, s390, s390x, sh4, sh4eb, sparc, sparc64, unicore32, x86_64, xtensa, xtensaeb

The default architecture to be used when using the image properties filter.

When using the ImagePropertiesFilter, it is possible that you want to define a default architecture to make the user experience easier and avoid having something like x86_64 images landing on AARCH64 compute nodes because the user did not specify the hw_architecture property in Glance.

Possible values:

CPU Architectures such as x86_64, aarch64, s390x.

isolated_images¶

Type: list
Default: []

List of UUIDs for images that can only be run on certain hosts.

If there is a need to restrict some images to only run on certain designated hosts, list those image UUIDs here.

Note that this setting only affects scheduling if the IsolatedHostsFilter filter is enabled.

Possible values:

A list of UUID strings, where each string corresponds to the UUID of an image

Related options:

[filter_scheduler] isolated_hosts
[filter_scheduler] restrict_isolated_hosts_to_isolated_images

Deprecated Variations¶
Group	Name
DEFAULT	isolated_images

isolated_hosts¶

Type: list
Default: []

List of hosts that can only run certain images.

If there is a need to restrict some images to only run on certain designated hosts, list those host names here.

Note that this setting only affects scheduling if the IsolatedHostsFilter filter is enabled.

Possible values:

A list of strings, where each string corresponds to the name of a host

Related options:

[filter_scheduler] isolated_images
[filter_scheduler] restrict_isolated_hosts_to_isolated_images

Deprecated Variations¶
Group	Name
DEFAULT	isolated_hosts

restrict_isolated_hosts_to_isolated_images¶

Type: boolean
Default: True

Prevent non-isolated images from being built on isolated hosts.

Note that this setting only affects scheduling if the IsolatedHostsFilter filter is enabled. Even then, this option doesn’t affect the behavior of requests for isolated images, which will always be restricted to isolated hosts.

Related options:

[filter_scheduler] isolated_images
[filter_scheduler] isolated_hosts

Deprecated Variations¶
Group	Name
DEFAULT	restrict_isolated_hosts_to_isolated_images

aggregate_image_properties_isolation_namespace¶

Type: string
Default: <None>

Image property namespace for use in the host aggregate.

Images and hosts can be configured so that certain images can only be scheduled to hosts in a particular aggregate. This is done with metadata values set on the host aggregate that are identified by beginning with the value of this option. If the host is part of an aggregate with such a metadata key, the image in the request spec must have the value of that metadata in its properties in order for the scheduler to consider the host as acceptable.

Note that this setting only affects scheduling if the AggregateImagePropertiesIsolation filter is enabled.

Possible values:

A string, where the string corresponds to an image property namespace

Related options:

[filter_scheduler] aggregate_image_properties_isolation_separator

Deprecated Variations¶
Group	Name
DEFAULT	aggregate_image_properties_isolation_namespace

aggregate_image_properties_isolation_separator¶

Type: string
Default: .

Separator character(s) for image property namespace and name.

When using the aggregate_image_properties_isolation filter, the relevant metadata keys are prefixed with the namespace defined in the aggregate_image_properties_isolation_namespace configuration option plus a separator. This option defines the separator to be used.

Note that this setting only affects scheduling if the AggregateImagePropertiesIsolation filter is enabled.

Possible values:

A string, where the string corresponds to an image property namespace separator character

Related options:

[filter_scheduler] aggregate_image_properties_isolation_namespace

Deprecated Variations¶
Group	Name
DEFAULT	aggregate_image_properties_isolation_separator

glance¶

Configuration options for the Image service

api_servers¶

Type: list
Default: <None>

List of glance api servers endpoints available to nova.

https is used for ssl-based glance api servers.

NOTE: The preferred mechanism for endpoint discovery is via keystoneauth1 loading options. Only use api_servers if you need multiple endpoints and are unable to use a load balancer for some reason.

Possible values:

A list of any fully qualified url of the form “scheme://hostname:port[/path]” (i.e. “http://10.0.1.0:9292” or “https://my.glance.server/image”).

Warning

This option is deprecated for removal since 21.0.0. Its value may be silently ignored in the future.

Reason: Support for image service configuration via standard keystoneauth1 Adapter options was added in the 17.0.0 Queens release. The api_servers option was retained temporarily to allow consumers time to cut over to a real load balancing solution.

num_retries¶

Type: integer
Default: 3
Minimum Value: 0

Enable glance operation retries.

Specifies the number of retries when uploading / downloading an image to / from glance. 0 means no retries.

verify_glance_signatures¶

Type: boolean
Default: False

Enable image signature verification.

nova uses the image signature metadata from glance and verifies the signature of a signed image while downloading that image. If the image signature cannot be verified or if the image signature metadata is either incomplete or unavailable, then nova will not boot the image and instead will place the instance into an error state. This provides end users with stronger assurances of the integrity of the image data they are using to create servers.

Related options:

The options in the key_manager group, as the key_manager is used for the signature validation.
Both enable_certificate_validation and default_trusted_certificate_ids below depend on this option being enabled.

enable_certificate_validation¶

Type: boolean
Default: False

Enable certificate validation for image signature verification.

During image signature verification nova will first verify the validity of the image’s signing certificate using the set of trusted certificates associated with the instance. If certificate validation fails, signature verification will not be performed and the instance will be placed into an error state. This provides end users with stronger assurances that the image data is unmodified and trustworthy. If left disabled, image signature verification can still occur but the end user will not have any assurance that the signing certificate used to generate the image signature is still trustworthy.

Related options:

This option only takes effect if verify_glance_signatures is enabled.
The value of default_trusted_certificate_ids may be used when this option is enabled.

Warning

This option is deprecated for removal since 16.0.0. Its value may be silently ignored in the future.

Reason: This option is intended to ease the transition for deployments leveraging image signature verification. The intended state long-term is for signature verification and certificate validation to always happen together.

default_trusted_certificate_ids¶

Type: list
Default: []

List of certificate IDs for certificates that should be trusted.

May be used as a default list of trusted certificate IDs for certificate validation. The value of this option will be ignored if the user provides a list of trusted certificate IDs with an instance API request. The value of this option will be persisted with the instance data if signature verification and certificate validation are enabled and if the user did not provide an alternative list. If left empty when certificate validation is enabled the user must provide a list of trusted certificate IDs otherwise certificate validation will fail.

Related options:

The value of this option may be used if both verify_glance_signatures and enable_certificate_validation are enabled.

enable_rbd_download¶

Type: boolean
Default: False

Enable download of Glance images directly via RBD.

Allow compute hosts to quickly download and cache images localy directly from Ceph rather than slow dowloads from the Glance API. This can reduce download time for images in the ten to hundreds of GBs from tens of minutes to tens of seconds, but requires a Ceph-based deployment and access from the compute nodes to Ceph.

Related options:

[glance] rbd_user
[glance] rbd_connect_timeout
[glance] rbd_pool
[glance] rbd_ceph_conf

rbd_user¶

Type: string
Default: ''

The RADOS client name for accessing Glance images stored as rbd volumes.

Related options:

This option is only used if [glance] enable_rbd_download is set to True.

rbd_connect_timeout¶

Type: integer
Default: 5

The RADOS client timeout in seconds when initially connecting to the cluster.

Related options:

This option is only used if [glance] enable_rbd_download is set to True.

rbd_pool¶

Type: string
Default: ''

The RADOS pool in which the Glance images are stored as rbd volumes.

Related options:

This option is only used if [glance] enable_rbd_download is set to True.

rbd_ceph_conf¶

Type: string
Default: ''

Path to the ceph configuration file to use.

Related options:

This option is only used if [glance] enable_rbd_download is set to True.

debug¶

Type: boolean
Default: False

Enable or disable debug logging with glanceclient.

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

service_type¶

Type: string
Default: image

The default service_type for endpoint URL discovery.

service_name¶

Type: string
Default: <None>

The default service_name for endpoint URL discovery.

valid_interfaces¶

Type: list
Default: ['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

region_name¶

Type: string
Default: <None>

The default region_name for endpoint URL discovery.

endpoint_override¶

Type: string
Default: <None>

connect_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

status_code_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

guestfs¶

libguestfs is a set of tools for accessing and modifying virtual machine (VM) disk images. You can use this for viewing and editing files inside guests, scripting changes to VMs, monitoring disk used/free statistics, creating guests, P2V, V2V, performing backups, cloning VMs, building VMs, formatting disks and resizing disks.

debug¶

Type: boolean
Default: False

Enable/disables guestfs logging.

This configures guestfs to debug messages and push them to OpenStack logging system. When set to True, it traces libguestfs API calls and enable verbose debug messages. In order to use the above feature, “libguestfs” package must be installed.

Related options:

Since libguestfs access and modifies VM’s managed by libvirt, below options should be set to give access to those VM’s.

libvirt.inject_key
libvirt.inject_partition
libvirt.inject_password

healthcheck¶

path¶

Type: string
Default: /healthcheck

The path to respond to healtcheck requests on.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

detailed¶

Type: boolean
Default: False

Show more detailed information as part of the response. Security note: Enabling this option may expose sensitive details about the service being monitored. Be sure to verify that it will not violate your security policies.

backends¶

Type: list
Default: []

Additional backends that can perform health checks and report that information back as part of a request.

disable_by_file_path¶

Type: string
Default: <None>

Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin.

disable_by_file_paths¶

Type: list
Default: []

Check the presence of a file based on a port to determine if an application is running on a port. Expects a “port:path” list of strings. Used by DisableByFilesPortsHealthcheck plugin.

hyperv¶

The hyperv feature allows you to configure the Hyper-V hypervisor driver to be used within an OpenStack deployment.

dynamic_memory_ratio¶

Type: floating point
Default: 1.0

Dynamic memory ratio

Enables dynamic memory allocation (ballooning) when set to a value greater than 1. The value expresses the ratio between the total RAM assigned to an instance and its startup RAM amount. For example a ratio of 2.0 for an instance with 1024MB of RAM implies 512MB of RAM allocated at startup.

Possible values:

1.0: Disables dynamic memory allocation (Default).
Float values greater than 1.0: Enables allocation of total implied RAM divided by this value for startup.

enable_instance_metrics_collection¶

Type: boolean
Default: False

Enable instance metrics collection

Enables metrics collections for an instance by using Hyper-V’s metric APIs. Collected data can be retrieved by other apps and services, e.g.: Ceilometer.

instances_path_share¶

Type: string
Default: ''

Instances path share

The name of a Windows share mapped to the “instances_path” dir and used by the resize feature to copy files to the target host. If left blank, an administrative share (hidden network share) will be used, looking for the same “instances_path” used locally.

Possible values:

“”: An administrative share will be used (Default).
Name of a Windows share.

Related options:

“instances_path”: The directory which will be used if this option here is left blank.

limit_cpu_features¶

Type: boolean
Default: False

Limit CPU features

This flag is needed to support live migration to hosts with different CPU features and checked during instance creation in order to limit the CPU features used by the instance.

mounted_disk_query_retry_count¶

Type: integer
Default: 10
Minimum Value: 0

Mounted disk query retry count

The number of times to retry checking for a mounted disk. The query runs until the device can be found or the retry count is reached.

Possible values:

Positive integer values. Values greater than 1 is recommended (Default: 10).

Related options:

Time interval between disk mount retries is declared with “mounted_disk_query_retry_interval” option.

mounted_disk_query_retry_interval¶

Type: integer
Default: 5
Minimum Value: 0

Mounted disk query retry interval

Interval between checks for a mounted disk, in seconds.

Possible values:

Time in seconds (Default: 5).

Related options:

This option is meaningful when the mounted_disk_query_retry_count is greater than 1.
The retry loop runs with mounted_disk_query_retry_count and mounted_disk_query_retry_interval configuration options.

power_state_check_timeframe¶

Type: integer
Default: 60
Minimum Value: 0

Power state check timeframe

The timeframe to be checked for instance power state changes. This option is used to fetch the state of the instance from Hyper-V through the WMI interface, within the specified timeframe.

Possible values:

Timeframe in seconds (Default: 60).

power_state_event_polling_interval¶

Type: integer
Default: 2
Minimum Value: 0

Power state event polling interval

Instance power state change event polling frequency. Sets the listener interval for power state events to the given value. This option enhances the internal lifecycle notifications of instances that reboot themselves. It is unlikely that an operator has to change this value.

Possible values:

Time in seconds (Default: 2).

qemu_img_cmd¶

Type: string
Default: qemu-img.exe

qemu-img command

qemu-img is required for some of the image related operations like converting between different image types. You can get it from here: (http://qemu.weilnetz.de/) or you can install the Cloudbase OpenStack Hyper-V Compute Driver (https://cloudbase.it/openstack-hyperv-driver/) which automatically sets the proper path for this config option. You can either give the full path of qemu-img.exe or set its path in the PATH environment variable and leave this option to the default value.

Possible values:

Name of the qemu-img executable, in case it is in the same directory as the nova-compute service or its path is in the PATH environment variable (Default).
Path of qemu-img command (DRIVELETTER:PATHTOQEMU-IMGCOMMAND).

Related options:

If the config_drive_cdrom option is False, qemu-img will be used to convert the ISO to a VHD, otherwise the config drive will remain an ISO. To use config drive with Hyper-V, you must set the mkisofs_cmd value to the full path to an mkisofs.exe installation.

vswitch_name¶

Type: string
Default: <None>

External virtual switch name

The Hyper-V Virtual Switch is a software-based layer-2 Ethernet network switch that is available with the installation of the Hyper-V server role. The switch includes programmatically managed and extensible capabilities to connect virtual machines to both virtual networks and the physical network. In addition, Hyper-V Virtual Switch provides policy enforcement for security, isolation, and service levels. The vSwitch represented by this config option must be an external one (not internal or private).

Possible values:

If not provided, the first of a list of available vswitches is used. This list is queried using WQL.
Virtual switch name.

wait_soft_reboot_seconds¶

Type: integer
Default: 60
Minimum Value: 0

Wait soft reboot seconds

Number of seconds to wait for instance to shut down after soft reboot request is made. We fall back to hard reboot if instance does not shutdown within this window.

Possible values:

Time in seconds (Default: 60).

config_drive_cdrom¶

Type: boolean
Default: False

Mount config drive as a CD drive.

OpenStack can be configured to write instance metadata to a config drive, which is then attached to the instance before it boots. The config drive can be attached as a disk drive (default) or as a CD drive.

Related options:

This option is meaningful with force_config_drive option set to True or when the REST API call to create an instance will have --config-drive=True flag.
config_drive_format option must be set to iso9660 in order to use CD drive as the config drive image.
To use config drive with Hyper-V, you must set the mkisofs_cmd value to the full path to an mkisofs.exe installation. Additionally, you must set the qemu_img_cmd value to the full path to an qemu-img command installation.
You can configure the Compute service to always create a configuration drive by setting the force_config_drive option to True.

config_drive_inject_password¶

Type: boolean
Default: False

Inject password to config drive.

When enabled, the admin password will be available from the config drive image.

Related options:

This option is meaningful when used with other options that enable config drive usage with Hyper-V, such as force_config_drive.

volume_attach_retry_count¶

Type: integer
Default: 10
Minimum Value: 0

Volume attach retry count

The number of times to retry attaching a volume. Volume attachment is retried until success or the given retry count is reached.

Possible values:

Positive integer values (Default: 10).

Related options:

Time interval between attachment attempts is declared with volume_attach_retry_interval option.

volume_attach_retry_interval¶

Type: integer
Default: 5
Minimum Value: 0

Volume attach retry interval

Interval between volume attachment attempts, in seconds.

Possible values:

Time in seconds (Default: 5).

Related options:

This options is meaningful when volume_attach_retry_count is greater than 1.
The retry loop runs with volume_attach_retry_count and volume_attach_retry_interval configuration options.

enable_remotefx¶

Type: boolean
Default: False

Enable RemoteFX feature

This requires at least one DirectX 11 capable graphics adapter for Windows / Hyper-V Server 2012 R2 or newer and RDS-Virtualization feature has to be enabled.

Instances with RemoteFX can be requested with the following flavor extra specs:

os:resolution. Guest VM screen resolution size. Acceptable values:

1024x768, 1280x1024, 1600x1200, 1920x1200, 2560x1600, 3840x2160

3840x2160 is only available on Windows / Hyper-V Server 2016.

os:monitors. Guest VM number of monitors. Acceptable values:

[1, 4] - Windows / Hyper-V Server 2012 R2
[1, 8] - Windows / Hyper-V Server 2016

os:vram. Guest VM VRAM amount. Only available on Windows / Hyper-V Server 2016. Acceptable values:

64, 128, 256, 512, 1024

use_multipath_io¶

Type: boolean
Default: False

Use multipath connections when attaching iSCSI or FC disks.

This requires the Multipath IO Windows feature to be enabled. MPIO must be configured to claim such devices.

iscsi_initiator_list¶

Type: list
Default: []

List of iSCSI initiators that will be used for estabilishing iSCSI sessions.

If none are specified, the Microsoft iSCSI initiator service will choose the initiator.

image_cache¶

A collection of options specific to image caching.

manager_interval¶

Type: integer
Default: 2400
Minimum Value: -1

Number of seconds to wait between runs of the image cache manager.

Note that when using shared storage for the [DEFAULT]/instances_path configuration option across multiple nova-compute services, this periodic could process a large number of instances. Similarly, using a compute driver that manages a cluster (like vmwareapi.VMwareVCDriver) could result in processing a large number of instances. Therefore you may need to adjust the time interval for the anticipated load, or only run on one nova-compute service within a shared storage aggregate.

Possible values:

0: run at the default interval of 60 seconds (not recommended)
-1: disable
Any other value

Related options:

[DEFAULT]/compute_driver
[DEFAULT]/instances_path

Deprecated Variations¶
Group	Name
DEFAULT	image_cache_manager_interval

subdirectory_name¶

Type: string
Default: _base

Location of cached images.

This is NOT the full path - just a folder name relative to ‘$instances_path’. For per-compute-host cached images, set to ‘_base_$my_ip’

Deprecated Variations¶
Group	Name
DEFAULT	image_cache_subdirectory_name

remove_unused_base_images¶

Type: boolean
Default: True

Should unused base images be removed?

Deprecated Variations¶
Group	Name
DEFAULT	remove_unused_base_images

remove_unused_original_minimum_age_seconds¶

Type: integer
Default: 86400

Unused unresized base images younger than this will not be removed.

Deprecated Variations¶
Group	Name
DEFAULT	remove_unused_original_minimum_age_seconds

remove_unused_resized_minimum_age_seconds¶

Type: integer
Default: 3600

Unused resized base images younger than this will not be removed.

Deprecated Variations¶
Group	Name
libvirt	remove_unused_resized_minimum_age_seconds

precache_concurrency¶

Type: integer
Default: 1
Minimum Value: 1

Maximum number of compute hosts to trigger image precaching in parallel.

When an image precache request is made, compute nodes will be contacted to initiate the download. This number constrains the number of those that will happen in parallel. Higher numbers will cause more computes to work in parallel and may result in reduced time to complete the operation, but may also DDoS the image service. Lower numbers will result in more sequential operation, lower image service load, but likely longer runtime to completion.

ironic¶

Configuration options for Ironic driver (Bare Metal). If using the Ironic driver following options must be set: * auth_type * auth_url * project_name * username * password * project_domain_id or project_domain_name * user_domain_id or user_domain_name

api_max_retries¶

Type: integer
Default: 60
Minimum Value: 0

The number of times to retry when a request conflicts. If set to 0, only try once, no retries.

Related options:

api_retry_interval

api_retry_interval¶

Type: integer
Default: 2
Minimum Value: 0

The number of seconds to wait before retrying the request.

Related options:

api_max_retries

serial_console_state_timeout¶

Type: integer
Default: 10
Minimum Value: 0

Timeout (seconds) to wait for node serial console state changed. Set to 0 to disable timeout.

partition_key¶

Type: string
Default: <None>
Mutable: This option can be changed without restarting.

Case-insensitive key to limit the set of nodes that may be managed by this service to the set of nodes in Ironic which have a matching conductor_group property. If unset, all available nodes will be eligible to be managed by this service. Note that setting this to the empty string ("") will match the default conductor group, and is different than leaving the option unset.

peer_list¶

Type: list
Default: []
Mutable: This option can be changed without restarting.

List of hostnames for all nova-compute services (including this host) with this partition_key config value. Nodes matching the partition_key value will be distributed between all services specified here. If partition_key is unset, this option is ignored.

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
ironic	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

auth_url¶

Type: unknown type
Default: <None>

Authentication URL

system_scope¶

Type: unknown type
Default: <None>

Scope for system operations

domain_id¶

Type: unknown type
Default: <None>

Domain ID to scope to

domain_name¶

Type: unknown type
Default: <None>

Domain name to scope to

project_id¶

Type: unknown type
Default: <None>

Project ID to scope to

project_name¶

Type: unknown type
Default: <None>

Project name to scope to

project_domain_id¶

Type: unknown type
Default: <None>

Domain ID containing project

project_domain_name¶

Type: unknown type
Default: <None>

Domain name containing project

trust_id¶

Type: unknown type
Default: <None>

Trust ID

user_id¶

Type: unknown type
Default: <None>

User ID

username¶

Type: unknown type
Default: <None>

Username

Deprecated Variations¶
Group	Name
ironic	user-name
ironic	user_name

user_domain_id¶

Type: unknown type
Default: <None>

User’s domain id

user_domain_name¶

Type: unknown type
Default: <None>

User’s domain name

password¶

Type: unknown type
Default: <None>

User’s password

service_type¶

Type: string
Default: baremetal

The default service_type for endpoint URL discovery.

service_name¶

Type: string
Default: <None>

The default service_name for endpoint URL discovery.

valid_interfaces¶

Type: list
Default: ['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

region_name¶

Type: string
Default: <None>

The default region_name for endpoint URL discovery.

endpoint_override¶

Type: string
Default: <None>

connect_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

status_code_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

key_manager¶

fixed_key¶

Type: string
Default: <None>

Fixed key returned by key manager, specified in hex.

Possible values:

Empty string or a key in hex value

Deprecated Variations¶
Group	Name
keymgr	fixed_key

backend¶

Type: string
Default: barbican

Specify the key manager implementation. Options are “barbican” and “vault”. Default is “barbican”. Will support the values earlier set using [key_manager]/api_class for some time.

Deprecated Variations¶
Group	Name
key_manager	api_class

auth_type¶

Type: string
Default: <None>

The type of authentication credential to create. Possible values are ‘token’, ‘password’, ‘keystone_token’, and ‘keystone_password’. Required if no context is passed to the credential factory.

token¶

Type: string
Default: <None>

Token for authentication. Required for ‘token’ and ‘keystone_token’ auth_type if no context is passed to the credential factory.

username¶

Type: string
Default: <None>

Username for authentication. Required for ‘password’ auth_type. Optional for the ‘keystone_password’ auth_type.

password¶

Type: string
Default: <None>

Password for authentication. Required for ‘password’ and ‘keystone_password’ auth_type.

auth_url¶

Type: string
Default: <None>

Use this endpoint to connect to Keystone.

user_id¶

Type: string
Default: <None>

User ID for authentication. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

user_domain_id¶

Type: string
Default: <None>

User’s domain ID for authentication. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

user_domain_name¶

Type: string
Default: <None>

User’s domain name for authentication. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

trust_id¶

Type: string
Default: <None>

Trust ID for trust scoping. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

domain_id¶

Type: string
Default: <None>

Domain ID for domain scoping. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

domain_name¶

Type: string
Default: <None>

Domain name for domain scoping. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

project_id¶

Type: string
Default: <None>

Project ID for project scoping. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

project_name¶

Type: string
Default: <None>

Project name for project scoping. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

project_domain_id¶

Type: string
Default: <None>

Project’s domain ID for project. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

project_domain_name¶

Type: string
Default: <None>

Project’s domain name for project. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

reauthenticate¶

Type: boolean
Default: True

Allow fetching a new token if the current one is going to expire. Optional for ‘keystone_token’ and ‘keystone_password’ auth_type.

keystone¶

Configuration options for the identity service

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

service_type¶

Type: string
Default: identity

The default service_type for endpoint URL discovery.

service_name¶

Type: string
Default: <None>

The default service_name for endpoint URL discovery.

valid_interfaces¶

Type: list
Default: ['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

region_name¶

Type: string
Default: <None>

The default region_name for endpoint URL discovery.

endpoint_override¶

Type: string
Default: <None>

connect_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

status_code_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

keystone_authtoken¶

www_authenticate_uri¶

Type: string
Default: <None>

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

Deprecated Variations¶
Group	Name
keystone_authtoken	auth_uri

auth_uri¶

Type: string
Default: <None>

Warning

This option is deprecated for removal since Queens. Its value may be silently ignored in the future.

Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version¶

Type: string
Default: <None>

API version of the Identity API endpoint.

interface¶

Type: string
Default: internal

Interface to use for the Identity API endpoint. Valid values are “public”, “internal” (default) or “admin”.

delay_auth_decision¶

Type: boolean
Default: False

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout¶

Type: integer
Default: <None>

Request timeout value for communicating with Identity API server.

http_request_max_retries¶

Type: integer
Default: 3

How many times are we trying to reconnect when communicating with Identity API Server.

cache¶

Type: string
Default: <None>

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile¶

Type: string
Default: <None>

Required if identity server requires client certificate

keyfile¶

Type: string
Default: <None>

Required if identity server requires client certificate

cafile¶

Type: string
Default: <None>

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

region_name¶

Type: string
Default: <None>

The region in which the identity server can be found.

memcached_servers¶

Type: list
Default: <None>

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations¶
Group	Name
keystone_authtoken	memcache_servers

token_cache_time¶

Type: integer
Default: 300

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

memcache_security_strategy¶

Type: string
Default: None
Valid Values: None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key¶

Type: string
Default: <None>

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry¶

Type: integer
Default: 300

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize¶

Type: integer
Default: 10

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout¶

Type: integer
Default: 3

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout¶

Type: integer
Default: 60

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout¶

Type: integer
Default: 10

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool¶

Type: boolean
Default: False

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

include_service_catalog¶

Type: boolean
Default: True

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind¶

Type: string
Default: permissive

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

service_token_roles¶

Type: list
Default: ['service']

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required¶

Type: boolean
Default: False

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

service_type¶

Type: string
Default: <None>

The name or type of the service as it appears in the service catalog. This is used to validate tokens that have restricted access rules.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
keystone_authtoken	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

libvirt¶

Libvirt options allows cloud administrator to configure related libvirt hypervisor driver to be used within an OpenStack deployment.

Almost all of the libvirt config options are influence by virt_type config which describes the virtualization type (or so called domain type) libvirt should use for specific features such as live migration, snapshot.

rescue_image_id¶

Type: string
Default: <None>

The ID of the image to boot from to rescue data from a corrupted instance.

If the rescue REST API operation doesn’t provide an ID of an image to use, the image which is referenced by this ID is used. If this option is not set, the image from the instance is used.

Possible values:

An ID of an image or nothing. If it points to an Amazon Machine Image (AMI), consider to set the config options rescue_kernel_id and rescue_ramdisk_id too. If nothing is set, the image of the instance is used.

Related options:

rescue_kernel_id: If the chosen rescue image allows the separate definition of its kernel disk, the value of this option is used, if specified. This is the case when Amazon’s AMI/AKI/ARI image format is used for the rescue image.
rescue_ramdisk_id: If the chosen rescue image allows the separate definition of its RAM disk, the value of this option is used if, specified. This is the case when Amazon’s AMI/AKI/ARI image format is used for the rescue image.

rescue_kernel_id¶

Type: string
Default: <None>

The ID of the kernel (AKI) image to use with the rescue image.

If the chosen rescue image allows the separate definition of its kernel disk, the value of this option is used, if specified. This is the case when Amazon’s AMI/AKI/ARI image format is used for the rescue image.

Possible values:

An ID of an kernel image or nothing. If nothing is specified, the kernel disk from the instance is used if it was launched with one.

Related options:

rescue_image_id: If that option points to an image in Amazon’s AMI/AKI/ARI image format, it’s useful to use rescue_kernel_id too.

rescue_ramdisk_id¶

Type: string
Default: <None>

The ID of the RAM disk (ARI) image to use with the rescue image.

If the chosen rescue image allows the separate definition of its RAM disk, the value of this option is used, if specified. This is the case when Amazon’s AMI/AKI/ARI image format is used for the rescue image.

Possible values:

An ID of a RAM disk image or nothing. If nothing is specified, the RAM disk from the instance is used if it was launched with one.

Related options:

rescue_image_id: If that option points to an image in Amazon’s AMI/AKI/ARI image format, it’s useful to use rescue_ramdisk_id too.

virt_type¶

Type: string
Default: kvm
Valid Values: kvm, lxc, qemu, parallels

Describes the virtualization type (or so called domain type) libvirt should use.

The choice of this type must match the underlying virtualization strategy you have chosen for this host.

Related options:

connection_uri: depends on this
disk_prefix: depends on this
cpu_mode: depends on this
cpu_models: depends on this

connection_uri¶

Type: string
Default: ''

Overrides the default libvirt URI of the chosen virtualization type.

If set, Nova will use this URI to connect to libvirt.

Possible values:

An URI like qemu:///system.

This is only necessary if the URI differs to the commonly known URIs for the chosen virtualization type.

Related options:

virt_type: Influences what is used as default value here.

inject_password¶

Type: boolean
Default: False

Allow the injection of an admin password for instance only at create and rebuild process.

There is no agent needed within the image to do this. If libguestfs is available on the host, it will be used. Otherwise nbd is used. The file system of the image will be mounted and the admin password, which is provided in the REST API call will be injected as password for the root user. If no root user is available, the instance won’t be launched and an error is thrown. Be aware that the injection is not possible when the instance gets launched from a volume.

Linux distribution guest only.

Possible values:

True: Allows the injection.
False: Disallows the injection. Any via the REST API provided admin password will be silently ignored.

Related options:

inject_partition: That option will decide about the discovery and usage of the file system. It also can disable the injection at all.

inject_key¶

Type: boolean
Default: False

Allow the injection of an SSH key at boot time.

There is no agent needed within the image to do this. If libguestfs is available on the host, it will be used. Otherwise nbd is used. The file system of the image will be mounted and the SSH key, which is provided in the REST API call will be injected as SSH key for the root user and appended to the authorized_keys of that user. The SELinux context will be set if necessary. Be aware that the injection is not possible when the instance gets launched from a volume.

This config option will enable directly modifying the instance disk and does not affect what cloud-init may do using data from config_drive option or the metadata service.

Linux distribution guest only.

Related options:

inject_partition: That option will decide about the discovery and usage of the file system. It also can disable the injection at all.

inject_partition¶

Type: integer
Default: -2
Minimum Value: -2

Determines how the file system is chosen to inject data into it.

libguestfs is used to inject data. If libguestfs is not able to determine the root partition (because there are more or less than one root partition) or cannot mount the file system it will result in an error and the instance won’t boot.

Possible values:

-2 => disable the injection of data.
-1 => find the root partition with the file system to mount with libguestfs
0 => The image is not partitioned
>0 => The number of the partition to use for the injection

Linux distribution guest only.

Related options:

inject_key: If this option allows the injection of a SSH key it depends on value greater or equal to -1 for inject_partition.
inject_password: If this option allows the injection of an admin password it depends on value greater or equal to -1 for inject_partition.
[guestfs]/debug You can enable the debug log level of libguestfs with this config option. A more verbose output will help in debugging issues.
virt_type: If you use lxc as virt_type it will be treated as a single partition image

live_migration_scheme¶

Type: string
Default: <None>

URI scheme for live migration used by the source of live migration traffic.

Override the default libvirt live migration scheme (which is dependent on virt_type). If this option is set to None, nova will automatically choose a sensible default based on the hypervisor. It is not recommended that you change this unless you are very sure that hypervisor supports a particular scheme.

Related options:

virt_type: This option is meaningful only when virt_type is set to kvm or qemu.
live_migration_uri: If live_migration_uri value is not None, the scheme used for live migration is taken from live_migration_uri instead.

live_migration_inbound_addr¶

Type: host address
Default: <None>

IP address used as the live migration address for this host.

This option indicates the IP address which should be used as the target for live migration traffic when migrating to this hypervisor. This metadata is then used by the source of the live migration traffic to construct a migration URI.

If this option is set to None, the hostname of the migration target compute node will be used.

This option is useful in environments where the live-migration traffic can impact the network plane significantly. A separate network for live-migration traffic can then use this config option and avoids the impact on the management network.

live_migration_uri¶

Type: string
Default: <None>

Live migration target URI used by the source of live migration traffic.

Override the default libvirt live migration target URI (which is dependent on virt_type). Any included “%s” is replaced with the migration target hostname, or live_migration_inbound_addr if set.

If this option is set to None (which is the default), Nova will automatically generate the live_migration_uri value based on only 4 supported virt_type in following list:

‘kvm’: ‘qemu+tcp://%s/system’
‘qemu’: ‘qemu+tcp://%s/system’
‘parallels’: ‘parallels+tcp://%s/system’

Related options:

live_migration_inbound_addr: If live_migration_inbound_addr value is not None and live_migration_tunnelled is False, the ip/hostname address of target compute node is used instead of live_migration_uri as the uri for live migration.
live_migration_scheme: If live_migration_uri is not set, the scheme used for live migration is taken from live_migration_scheme instead.

Warning

This option is deprecated for removal since 15.0.0. Its value may be silently ignored in the future.

Reason: live_migration_uri is deprecated for removal in favor of two other options that allow to change live migration scheme and target URI: live_migration_scheme and live_migration_inbound_addr respectively.

live_migration_tunnelled¶

Type: boolean
Default: False

Enable tunnelled migration.

This option enables the tunnelled migration feature, where migration data is transported over the libvirtd connection. If enabled, we use the VIR_MIGRATE_TUNNELLED migration flag, avoiding the need to configure the network to allow direct hypervisor to hypervisor communication. If False, use the native transport. If not set, Nova will choose a sensible default based on, for example the availability of native encryption support in the hypervisor. Enabling this option will definitely impact performance massively.

Note that this option is NOT compatible with use of block migration.

Warning

This option is deprecated for removal since 23.0.0. Its value may be silently ignored in the future.

Reason: The “tunnelled live migration” has two inherent limitations: it cannot handle live migration of disks in a non-shared storage setup; and it has a huge performance cost. Both these problems are solved by live_migration_with_native_tls (requires a pre-configured TLS environment), which is the recommended approach for securing all live migration streams.

live_migration_bandwidth¶

Type: integer
Default: 0

Maximum bandwidth(in MiB/s) to be used during migration.

If set to 0, the hypervisor will choose a suitable default. Some hypervisors do not support this feature and will return an error if bandwidth is not 0. Please refer to the libvirt documentation for further details.

live_migration_downtime¶

Type: integer
Default: 500
Minimum Value: 100

Maximum permitted downtime, in milliseconds, for live migration switchover.

Will be rounded up to a minimum of 100ms. You can increase this value if you want to allow live-migrations to complete faster, or avoid live-migration timeout errors by allowing the guest to be paused for longer during the live-migration switch over.

Related options:

live_migration_completion_timeout

live_migration_downtime_steps¶

Type: integer
Default: 10
Minimum Value: 3

Number of incremental steps to reach max downtime value.

Will be rounded up to a minimum of 3 steps.

live_migration_downtime_delay¶

Type: integer
Default: 75
Minimum Value: 3

Time to wait, in seconds, between each step increase of the migration downtime.

Minimum delay is 3 seconds. Value is per GiB of guest RAM + disk to be transferred, with lower bound of a minimum of 2 GiB per device.

live_migration_completion_timeout¶

Type: integer
Default: 800
Minimum Value: 0
Mutable: This option can be changed without restarting.

Time to wait, in seconds, for migration to successfully complete transferring data before aborting the operation.

Value is per GiB of guest RAM + disk to be transferred, with lower bound of a minimum of 2 GiB. Should usually be larger than downtime delay * downtime steps. Set to 0 to disable timeouts.

Related options:

live_migration_downtime
live_migration_downtime_steps
live_migration_downtime_delay

live_migration_timeout_action¶

Type: string
Default: abort
Valid Values: abort, force_complete
Mutable: This option can be changed without restarting.

This option will be used to determine what action will be taken against a VM after live_migration_completion_timeout expires. By default, the live migrate operation will be aborted after completion timeout. If it is set to force_complete, the compute service will either pause the VM or trigger post-copy depending on if post copy is enabled and available (live_migration_permit_post_copy is set to True).

Related options:

live_migration_completion_timeout
live_migration_permit_post_copy

live_migration_permit_post_copy¶

Type: boolean
Default: False

This option allows nova to switch an on-going live migration to post-copy mode, i.e., switch the active VM to the one on the destination node before the migration is complete, therefore ensuring an upper bound on the memory that needs to be transferred. Post-copy requires libvirt>=1.3.3 and QEMU>=2.5.0.

When permitted, post-copy mode will be automatically activated if we reach the timeout defined by live_migration_completion_timeout and live_migration_timeout_action is set to ‘force_complete’. Note if you change to no timeout or choose to use ‘abort’, i.e. live_migration_completion_timeout = 0, then there will be no automatic switch to post-copy.

The live-migration force complete API also uses post-copy when permitted. If post-copy mode is not available, force complete falls back to pausing the VM to ensure the live-migration operation will complete.

When using post-copy mode, if the source and destination hosts lose network connectivity, the VM being live-migrated will need to be rebooted. For more details, please see the Administration guide.

Related options:

live_migration_permit_auto_converge
live_migration_timeout_action

live_migration_permit_auto_converge¶

Type: boolean
Default: False

This option allows nova to start live migration with auto converge on.

Auto converge throttles down CPU if a progress of on-going live migration is slow. Auto converge will only be used if this flag is set to True and post copy is not permitted or post copy is unavailable due to the version of libvirt and QEMU in use.

Related options:

live_migration_permit_post_copy

snapshot_image_format¶

Type: string
Default: <None>
Valid Values: raw, qcow2, vmdk, vdi

Determine the snapshot image format when sending to the image service.

If set, this decides what format is used when sending the snapshot to the image service. If not set, defaults to same type as source image.

Possible values

raw: RAW disk format
qcow2: KVM default disk format
vmdk: VMWare default disk format
vdi: VirtualBox default disk format

live_migration_with_native_tls¶

Type: boolean
Default: False

Use QEMU-native TLS encryption when live migrating.

This option will allow both migration stream (guest RAM plus device state) and disk stream to be transported over native TLS, i.e. TLS support built into QEMU.

Prerequisite: TLS environment is configured correctly on all relevant Compute nodes. This means, Certificate Authority (CA), server, client certificates, their corresponding keys, and their file permisssions are in place, and are validated.

Notes:

To have encryption for migration stream and disk stream (also called: “block migration”), live_migration_with_native_tls is the preferred config attribute instead of live_migration_tunnelled.
The live_migration_tunnelled will be deprecated in the long-term for two main reasons: (a) it incurs a huge performance penalty; and (b) it is not compatible with block migration. Therefore, if your compute nodes have at least libvirt 4.4.0 and QEMU 2.11.0, it is strongly recommended to use live_migration_with_native_tls.
The live_migration_tunnelled and live_migration_with_native_tls should not be used at the same time.
Unlike live_migration_tunnelled, the live_migration_with_native_tls is compatible with block migration. That is, with this option, NBD stream, over which disks are migrated to a target host, will be encrypted.

Related options:

live_migration_tunnelled: This transports migration stream (but not disk stream) over libvirtd.

disk_prefix¶

Type: string
Default: <None>

Override the default disk prefix for the devices attached to an instance.

If set, this is used to identify a free disk device name for a bus.

Possible values:

Any prefix which will result in a valid disk device name like ‘sda’ or ‘hda’ for example. This is only necessary if the device names differ to the commonly known device name prefixes for a virtualization type such as: sd, xvd, uvd, vd.

Related options:

virt_type: Influences which device type is used, which determines the default disk prefix.

wait_soft_reboot_seconds¶

Type: integer
Default: 120

Number of seconds to wait for instance to shut down after soft reboot request is made. We fall back to hard reboot if instance does not shutdown within this window.

cpu_mode¶

Type: string
Default: <None>
Valid Values: host-model, host-passthrough, custom, none

Is used to set the CPU mode an instance should have.

If virt_type="kvm|qemu", it will default to host-model, otherwise it will default to none.

Related options:

cpu_models: This should be set ONLY when cpu_mode is set to custom. Otherwise, it would result in an error and the instance launch will fail.

Possible values

host-model: Clone the host CPU feature flags
host-passthrough: Use the host CPU model exactly
custom: Use the CPU model in [libvirt]cpu_models
none: Don’t set a specific CPU model. For instances with [libvirt] virt_type as KVM/QEMU, the default CPU model from QEMU will be used, which provides a basic set of CPU features that are compatible with most hosts

cpu_models¶

Type: list
Default: []

An ordered list of CPU models the host supports.

It is expected that the list is ordered so that the more common and less advanced CPU models are listed earlier. Here is an example: SandyBridge,IvyBridge,Haswell,Broadwell, the latter CPU model’s features is richer that the previous CPU model.

Possible values:

The named CPU models can be found via virsh cpu-models ARCH, where ARCH is your host architecture.

Related options:

cpu_mode: This should be set to custom ONLY when you want to configure (via cpu_models) a specific named CPU model. Otherwise, it would result in an error and the instance launch will fail.
virt_type: Only the virtualization types kvm and qemu use this.

Note

Be careful to only specify models which can be fully supported in hardware.

Deprecated Variations¶
Group	Name
libvirt	cpu_model

cpu_model_extra_flags¶

Type: list
Default: []

Enable or disable guest CPU flags.

To explicitly enable or disable CPU flags, use the +flag or -flag notation – the + sign will enable the CPU flag for the guest, while a - sign will disable it. If neither + nor - is specified, the flag will be enabled, which is the default behaviour. For example, if you specify the following (assuming the said CPU model and features are supported by the host hardware and software):

[libvirt]
cpu_mode = custom
cpu_models = Cascadelake-Server
cpu_model_extra_flags = -hle, -rtm, +ssbd, mtrr

Nova will disable the hle and rtm flags for the guest; and it will enable ssbd and mttr (because it was specified with neither + nor - prefix).

The CPU flags are case-insensitive. In the following example, the pdpe1gb flag will be disabled for the guest; vmx and pcid flags will be enabled:

[libvirt]
cpu_mode = custom
cpu_models = Haswell-noTSX-IBRS
cpu_model_extra_flags = -PDPE1GB, +VMX, pcid

Specifying extra CPU flags is valid in combination with all the three possible values of cpu_mode config attribute: custom (this also requires an explicit CPU model to be specified via the cpu_models config attribute), host-model, or host-passthrough.

There can be scenarios where you may need to configure extra CPU flags even for host-passthrough CPU mode, because sometimes QEMU may disable certain CPU features. An example of this is Intel’s “invtsc” (Invariable Time Stamp Counter) CPU flag – if you need to expose this flag to a Nova instance, you need to explicitly enable it.

The possible values for cpu_model_extra_flags depends on the CPU model in use. Refer to /usr/share/libvirt/cpu_map/*.xml` for possible CPU feature flags for a given CPU model.

A special note on a particular CPU flag: pcid (an Intel processor feature that alleviates guest performance degradation as a result of applying the ‘Meltdown’ CVE fixes). When configuring this flag with the custom CPU mode, not all CPU models (as defined by QEMU and libvirt) need it:

The only virtual CPU models that include the pcid capability are Intel “Haswell”, “Broadwell”, and “Skylake” variants.
The libvirt / QEMU CPU models “Nehalem”, “Westmere”, “SandyBridge”, and “IvyBridge” will _not_ expose the pcid capability by default, even if the host CPUs by the same name include it. I.e. ‘PCID’ needs to be explicitly specified when using the said virtual CPU models.

The libvirt driver’s default CPU mode, host-model, will do the right thing with respect to handling ‘PCID’ CPU flag for the guest – assuming you are running updated processor microcode, host and guest kernel, libvirt, and QEMU. The other mode, host-passthrough, checks if ‘PCID’ is available in the hardware, and if so directly passes it through to the Nova guests. Thus, in context of ‘PCID’, with either of these CPU modes (host-model or host-passthrough), there is no need to use the cpu_model_extra_flags.

Related options:

cpu_mode
cpu_models

snapshots_directory¶

Type: string
Default: $instances_path/snapshots

Location where libvirt driver will store snapshots before uploading them to image service

disk_cachemodes¶

Type: list
Default: []

Specific cache modes to use for different disk types.

For example: file=directsync,block=none,network=writeback

For local or direct-attached storage, it is recommended that you use writethrough (default) mode, as it ensures data integrity and has acceptable I/O performance for applications running in the guest, especially for read operations. However, caching mode none is recommended for remote NFS storage, because direct I/O operations (O_DIRECT) perform better than synchronous I/O operations (with O_SYNC). Caching mode none effectively turns all guest I/O operations into direct I/O operations on the host, which is the NFS client in this environment.

Possible cache modes:

default: “It Depends” – For Nova-managed disks, none, if the host file system is capable of Linux’s ‘O_DIRECT’ semantics; otherwise writeback. For volume drivers, the default is driver-dependent: none for everything except for SMBFS and Virtuzzo (which use writeback).
none: With caching mode set to none, the host page cache is disabled, but the disk write cache is enabled for the guest. In this mode, the write performance in the guest is optimal because write operations bypass the host page cache and go directly to the disk write cache. If the disk write cache is battery-backed, or if the applications or storage stack in the guest transfer data properly (either through fsync operations or file system barriers), then data integrity can be ensured. However, because the host page cache is disabled, the read performance in the guest would not be as good as in the modes where the host page cache is enabled, such as writethrough mode. Shareable disk devices, like for a multi-attachable block storage volume, will have their cache mode set to ‘none’ regardless of configuration.
writethrough: With caching set to writethrough mode, the host page cache is enabled, but the disk write cache is disabled for the guest. Consequently, this caching mode ensures data integrity even if the applications and storage stack in the guest do not transfer data to permanent storage properly (either through fsync operations or file system barriers). Because the host page cache is enabled in this mode, the read performance for applications running in the guest is generally better. However, the write performance might be reduced because the disk write cache is disabled.
writeback: With caching set to writeback mode, both the host page cache and the disk write cache are enabled for the guest. Because of this, the I/O performance for applications running in the guest is good, but the data is not protected in a power failure. As a result, this caching mode is recommended only for temporary data where potential data loss is not a concern. NOTE: Certain backend disk mechanisms may provide safe writeback cache semantics. Specifically those that bypass the host page cache, such as QEMU’s integrated RBD driver. Ceph documentation recommends setting this to writeback for maximum performance while maintaining data safety.
directsync: Like “writethrough”, but it bypasses the host page cache.
unsafe: Caching mode of unsafe ignores cache transfer operations completely. As its name implies, this caching mode should be used only for temporary data where data loss is not a concern. This mode can be useful for speeding up guest installations, but you should switch to another caching mode in production environments.

rng_dev_path¶

Type: string
Default: /dev/urandom

The path to an RNG (Random Number Generator) device that will be used as the source of entropy on the host. Since libvirt 1.3.4, any path (that returns random numbers when read) is accepted. The recommended source of entropy is /dev/urandom – it is non-blocking, therefore relatively fast; and avoids the limitations of /dev/random, which is a legacy interface. For more details (and comparision between different RNG sources), refer to the “Usage” section in the Linux kernel API documentation for [u]random: http://man7.org/linux/man-pages/man4/urandom.4.html and http://man7.org/linux/man-pages/man7/random.7.html.

hw_machine_type¶

Type: list
Default: <None>

For qemu or KVM guests, set this option to specify a default machine type per host architecture. You can find a list of supported machine types in your environment by checking the output of the virsh capabilities command. The format of the value for this config option is host-arch=machine-type. For example: x86_64=machinetype1,armv7l=machinetype2.

sysinfo_serial¶

Type: string
Default: unique
Valid Values: none, os, hardware, auto, unique

The data source used to the populate the host “serial” UUID exposed to guest in the virtual BIOS. All choices except unique will change the serial when migrating the instance to another host. Changing the choice of this option will also affect existing instances on this host once they are stopped and started again. It is recommended to use the default choice (unique) since that will not change when an instance is migrated. However, if you have a need for per-host serials in addition to per-instance serial numbers, then consider restricting flavors via host aggregates.

Possible values

none: A serial number entry is not added to the guest domain xml.
os: A UUID serial number is generated from the host /etc/machine-id file.
hardware: A UUID for the host hardware as reported by libvirt. This is typically from the host SMBIOS data, unless it has been overridden in libvirtd.conf.
auto: Uses the “os” source if possible, else “hardware”.
unique: Uses instance UUID as the serial number.

mem_stats_period_seconds¶

Type: integer
Default: 10

A number of seconds to memory usage statistics period. Zero or negative value mean to disable memory usage statistics.

uid_maps¶

Type: list
Default: []

List of uid targets and ranges.Syntax is guest-uid:host-uid:count. Maximum of 5 allowed.

gid_maps¶

Type: list
Default: []

List of guid targets and ranges.Syntax is guest-gid:host-gid:count. Maximum of 5 allowed.

realtime_scheduler_priority¶

Type: integer
Default: 1

In a realtime host context vCPUs for guest will run in that scheduling priority. Priority depends on the host kernel (usually 1-99)

enabled_perf_events¶

Type: list
Default: []

Performance events to monitor and collect statistics for.

This will allow you to specify a list of events to monitor low-level performance of guests, and collect related statistics via the libvirt driver, which in turn uses the Linux kernel’s perf infrastructure. With this config attribute set, Nova will generate libvirt guest XML to monitor the specified events.

For example, to monitor the count of CPU cycles (total/elapsed) and the count of cache misses, enable them as follows:

[libvirt]
enabled_perf_events = cpu_clock, cache_misses

Possible values: A string list. The list of supported events can be found here. Note that Intel CMT events - cmt, mbmbt and mbml - are unsupported by recent Linux kernel versions (4.14+) and will be ignored by nova.

num_pcie_ports¶

Type: integer
Default: 0
Minimum Value: 0
Maximum Value: 28

The number of PCIe ports an instance will get.

Libvirt allows a custom number of PCIe ports (pcie-root-port controllers) a target instance will get. Some will be used by default, rest will be available for hotplug use.

By default we have just 1-2 free ports which limits hotplug.

More info: https://github.com/qemu/qemu/blob/master/docs/pcie.txt

Due to QEMU limitations for aarch64/virt maximum value is set to ‘28’.

Default value ‘0’ moves calculating amount of ports to libvirt.

file_backed_memory¶

Type: integer
Default: 0
Minimum Value: 0

Available capacity in MiB for file-backed memory.

Set to 0 to disable file-backed memory.

When enabled, instances will create memory files in the directory specified in /etc/libvirt/qemu.conf’s memory_backing_dir option. The default location is /var/lib/libvirt/qemu/ram.

When enabled, the value defined for this option is reported as the node memory capacity. Compute node system memory will be used as a cache for file-backed memory, via the kernel’s pagecache mechanism.

Note

This feature is not compatible with hugepages.

Note

This feature is not compatible with memory overcommit.

Related options:

virt_type must be set to kvm or qemu.
ram_allocation_ratio must be set to 1.0.

num_memory_encrypted_guests¶

Type: integer
Default: <None>
Minimum Value: 0

Maximum number of guests with encrypted memory which can run concurrently on this compute host.

For now this is only relevant for AMD machines which support SEV (Secure Encrypted Virtualization). Such machines have a limited number of slots in their memory controller for storing encryption keys. Each running guest with encrypted memory will consume one of these slots.

The option may be reused for other equivalent technologies in the future. If the machine does not support memory encryption, the option will be ignored and inventory will be set to 0.

If the machine does support memory encryption, for now a value of None means an effectively unlimited inventory, i.e. no limit will be imposed by Nova on the number of SEV guests which can be launched, even though the underlying hardware will enforce its own limit. However it is expected that in the future, auto-detection of the inventory from the hardware will become possible, at which point None will cause auto-detection to automatically impose the correct limit.

Note

It is recommended to read the deployment documentation’s section on this option before deciding whether to configure this setting or leave it at the default.

Related options:

libvirt.virt_type must be set to kvm.
It’s recommended to consider including x86_64=q35 in libvirt.hw_machine_type; see Enabling SEV for more on this.

device_detach_attempts¶

Type: integer
Default: 8
Minimum Value: 1

Maximum number of attempts the driver tries to detach a device in libvirt.

Related options:

libvirt.device_detach_timeout

device_detach_timeout¶

Type: integer
Default: 20
Minimum Value: 1

Maximum number of seconds the driver waits for the success or the failure event from libvirt for a given device detach attempt before it re-trigger the detach.

Related options:

libvirt.device_detach_attempts

images_type¶

Type: string
Default: default
Valid Values: raw, flat, qcow2, lvm, rbd, ploop, default

VM Images format.

If default is specified, then use_cow_images flag is used instead of this one.

Related options:

compute.use_cow_images
images_volume_group
[workarounds]/ensure_libvirt_rbd_instance_dir_cleanup
compute.force_raw_images

images_volume_group¶

Type: string
Default: <None>

LVM Volume Group that is used for VM images, when you specify images_type=lvm

Related options:

images_type

sparse_logical_volumes¶

Type: boolean
Default: False

Create sparse logical volumes (with virtualsize) if this flag is set to True.

Warning

This option is deprecated for removal since 18.0.0. Its value may be silently ignored in the future.

Reason: Sparse logical volumes is a feature that is not tested hence not supported. LVM logical volumes are preallocated by default. If you want thin provisioning, use Cinder thin-provisioned volumes.

images_rbd_pool¶

Type: string
Default: rbd

The RADOS pool in which rbd volumes are stored

images_rbd_ceph_conf¶

Type: string
Default: ''

Path to the ceph configuration file to use

images_rbd_glance_store_name¶

Type: string
Default: ''

The name of the Glance store that represents the rbd cluster in use by this node. If set, this will allow Nova to request that Glance copy an image from an existing non-local store into the one named by this option before booting so that proper Copy-on-Write behavior is maintained.

Related options:

images_type - must be set to rbd
images_rbd_glance_copy_poll_interval - controls the status poll frequency
images_rbd_glance_copy_timeout - controls the overall copy timeout

images_rbd_glance_copy_poll_interval¶

Type: integer
Default: 15

The interval in seconds with which to poll Glance after asking for it to copy an image to the local rbd store. This affects how often we ask Glance to report on copy completion, and thus should be short enough that we notice quickly, but not too aggressive that we generate undue load on the Glance server.

Related options:

images_type - must be set to rbd
images_rbd_glance_store_name - must be set to a store name

images_rbd_glance_copy_timeout¶

Type: integer
Default: 600

The overall maximum time we will wait for Glance to complete an image copy to our local rbd store. This should be long enough to allow large images to be copied over the network link between our local store and the one where images typically reside. The downside of setting this too long is just to catch the case where the image copy is stalled or proceeding too slowly to be useful. Actual errors will be reported by Glance and noticed according to the poll interval.

Related options: * images_type - must be set to rbd * images_rbd_glance_store_name - must be set to a store name * images_rbd_glance_copy_poll_interval - controls the failure time-to-notice

hw_disk_discard¶

Type: string
Default: <None>
Valid Values: ignore, unmap

Discard option for nova managed disks.

Requires:

Libvirt >= 1.0.6
Qemu >= 1.5 (raw format)
Qemu >= 1.6 (qcow2 format)

volume_clear¶

Type: string
Default: zero
Valid Values: zero, shred, none

Method used to wipe ephemeral disks when they are deleted. Only takes effect if LVM is set as backing storage.

Related options:

images_type - must be set to lvm
volume_clear_size

Possible values

zero: Overwrite volumes with zeroes
shred: Overwrite volumes repeatedly
none: Do not wipe deleted volumes

volume_clear_size¶

Type: integer
Default: 0
Minimum Value: 0

Size of area in MiB, counting from the beginning of the allocated volume, that will be cleared using method set in volume_clear option.

Possible values:

0 - clear whole volume
>0 - clear specified amount of MiB

Related options:

images_type - must be set to lvm
volume_clear - must be set and the value must be different than none for this option to have any impact

snapshot_compression¶

Type: boolean
Default: False

Enable snapshot compression for qcow2 images.

Note: you can set snapshot_image_format to qcow2 to force all snapshots to be in qcow2 format, independently from their original image type.

Related options:

snapshot_image_format

use_virtio_for_bridges¶

Type: boolean
Default: True

Use virtio for bridge interfaces with KVM/QEMU

volume_use_multipath¶

Type: boolean
Default: False

Use multipath connection of the iSCSI or FC volume

Volumes can be connected in the LibVirt as multipath devices. This will provide high availability and fault tolerance.

Deprecated Variations¶
Group	Name
libvirt	iscsi_use_multipath

num_volume_scan_tries¶

Type: integer
Default: 5

Number of times to scan given storage protocol to find volume.

Deprecated Variations¶
Group	Name
libvirt	num_iscsi_scan_tries

num_aoe_discover_tries¶

Type: integer
Default: 3

Number of times to rediscover AoE target to find volume.

Nova provides support for block storage attaching to hosts via AOE (ATA over Ethernet). This option allows the user to specify the maximum number of retry attempts that can be made to discover the AoE device.

iscsi_iface¶

Type: string
Default: <None>

The iSCSI transport iface to use to connect to target in case offload support is desired.

Default format is of the form <transport_name>.<hwaddress>, where <transport_name> is one of (be2iscsi, bnx2i, cxgb3i, cxgb4i, qla4xxx, ocs, tcp) and <hwaddress> is the MAC address of the interface and can be generated via the iscsiadm -m iface command. Do not confuse the iscsi_iface parameter to be provided here with the actual transport name.

Deprecated Variations¶
Group	Name
libvirt	iscsi_transport

num_iser_scan_tries¶

Type: integer
Default: 5

Number of times to scan iSER target to find volume.

iSER is a server network protocol that extends iSCSI protocol to use Remote Direct Memory Access (RDMA). This option allows the user to specify the maximum number of scan attempts that can be made to find iSER volume.

iser_use_multipath¶

Type: boolean
Default: False

Use multipath connection of the iSER volume.

iSER volumes can be connected as multipath devices. This will provide high availability and fault tolerance.

rbd_user¶

Type: string
Default: <None>

The RADOS client name for accessing rbd(RADOS Block Devices) volumes.

Libvirt will refer to this user when connecting and authenticating with the Ceph RBD server.

rbd_secret_uuid¶

Type: string
Default: <None>

The libvirt UUID of the secret for the rbd_user volumes.

rbd_connect_timeout¶

Type: integer
Default: 5

The RADOS client timeout in seconds when initially connecting to the cluster.

rbd_destroy_volume_retry_interval¶

Type: integer
Default: 5
Minimum Value: 0

Number of seconds to wait between each consecutive retry to destroy a RBD volume.

Related options:

[libvirt]/images_type = ‘rbd’

rbd_destroy_volume_retries¶

Type: integer
Default: 12
Minimum Value: 0

Number of retries to destroy a RBD volume.

Related options:

[libvirt]/images_type = ‘rbd’

nfs_mount_point_base¶

Type: string
Default: $state_path/mnt

Directory where the NFS volume is mounted on the compute node. The default is ‘mnt’ directory of the location where nova’s Python module is installed.

NFS provides shared storage for the OpenStack Block Storage service.

Possible values:

A string representing absolute path of mount point.

nfs_mount_options¶

Type: string
Default: <None>

Mount options passed to the NFS client. See section of the nfs man page for details.

Mount options controls the way the filesystem is mounted and how the NFS client behaves when accessing files on this mount point.

Possible values:

Any string representing mount options separated by commas.
Example string: vers=3,lookupcache=pos

quobyte_mount_point_base¶

Type: string
Default: $state_path/mnt

Directory where the Quobyte volume is mounted on the compute node.

Nova supports Quobyte volume driver that enables storing Block Storage service volumes on a Quobyte storage back end. This Option specifies the path of the directory where Quobyte volume is mounted.

Possible values:

A string representing absolute path of mount point.

quobyte_client_cfg¶

Type: string
Default: <None>

Path to a Quobyte Client configuration file.

smbfs_mount_point_base¶

Type: string
Default: $state_path/mnt

Directory where the SMBFS shares are mounted on the compute node.

smbfs_mount_options¶

Type: string
Default: ''

Mount options passed to the SMBFS client.

Provide SMBFS options as a single string containing all parameters. See mount.cifs man page for details. Note that the libvirt-qemu uid and gid must be specified.

remote_filesystem_transport¶

Type: string
Default: ssh
Valid Values: ssh, rsync

libvirt’s transport method for remote file operations.

Because libvirt cannot use RPC to copy files over network to/from other compute nodes, other method must be used for:

creating directory on remote host
creating file on remote host
removing file from remote host
copying file to remote host

vzstorage_mount_point_base¶

Type: string
Default: $state_path/mnt

Directory where the Virtuozzo Storage clusters are mounted on the compute node.

This option defines non-standard mountpoint for Vzstorage cluster.

Related options:

vzstorage_mount_* group of parameters

vzstorage_mount_user¶

Type: string
Default: stack

Mount owner user name.

This option defines the owner user of Vzstorage cluster mountpoint.

Related options:

vzstorage_mount_* group of parameters

vzstorage_mount_group¶

Type: string
Default: qemu

Mount owner group name.

This option defines the owner group of Vzstorage cluster mountpoint.

Related options:

vzstorage_mount_* group of parameters

vzstorage_mount_perms¶

Type: string
Default: 0770

Mount access mode.

This option defines the access bits of Vzstorage cluster mountpoint, in the format similar to one of chmod(1) utility, like this: 0770. It consists of one to four digits ranging from 0 to 7, with missing lead digits assumed to be 0’s.

Related options:

vzstorage_mount_* group of parameters

vzstorage_log_path¶

Type: string
Default: /var/log/vstorage/%(cluster_name)s/nova.log.gz

Path to vzstorage client log.

This option defines the log of cluster operations, it should include “%(cluster_name)s” template to separate logs from multiple shares.

Related options:

vzstorage_mount_opts may include more detailed logging options.

vzstorage_cache_path¶

Type: string
Default: <None>

Path to the SSD cache file.

You can attach an SSD drive to a client and configure the drive to store a local cache of frequently accessed data. By having a local cache on a client’s SSD drive, you can increase the overall cluster performance by up to 10 and more times. WARNING! There is a lot of SSD models which are not server grade and may loose arbitrary set of data changes on power loss. Such SSDs should not be used in Vstorage and are dangerous as may lead to data corruptions and inconsistencies. Please consult with the manual on which SSD models are known to be safe or verify it using vstorage-hwflush-check(1) utility.

This option defines the path which should include “%(cluster_name)s” template to separate caches from multiple shares.

Related options:

vzstorage_mount_opts may include more detailed cache options.

vzstorage_mount_opts¶

Type: list
Default: []

Extra mount options for pstorage-mount

For full description of them, see https://static.openvz.org/vz-man/man1/pstorage-mount.1.gz.html Format is a python string representation of arguments list, like: “[‘-v’, ‘-R’, ‘500’]” Shouldn’t include -c, -l, -C, -u, -g and -m as those have explicit vzstorage_* options.

Related options:

All other vzstorage_* options

rx_queue_size¶

Type: unknown type
Default: <None>
Valid Values: 256, 512, 1024

Configure virtio rx queue size.

This option is only usable for virtio-net device with vhost and vhost-user backend. Available only with QEMU/KVM. Requires libvirt v2.3 QEMU v2.7.

tx_queue_size¶

Type: unknown type
Default: <None>
Valid Values: 256, 512, 1024

Configure virtio tx queue size.

This option is only usable for virtio-net device with vhost-user backend. Available only with QEMU/KVM. Requires libvirt v3.7 QEMU v2.10.

max_queues¶

Type: integer
Default: <None>
Minimum Value: 1

The maximum number of virtio queue pairs that can be enabled when creating a multiqueue guest. The number of virtio queues allocated will be the lesser of the CPUs requested by the guest and the max value defined. By default, this value is set to none meaning the legacy limits based on the reported kernel major version will be used.

num_nvme_discover_tries¶

Type: integer
Default: 5

Number of times to rediscover NVMe target to find volume

Nova provides support for block storage attaching to hosts via NVMe (Non-Volatile Memory Express). This option allows the user to specify the maximum number of retry attempts that can be made to discover the NVMe device.

pmem_namespaces¶

Type: list
Default: []

Configure persistent memory(pmem) namespaces.

These namespaces must have been already created on the host. This config option is in the following format:

"$LABEL:$NSNAME[|$NSNAME][,$LABEL:$NSNAME[|$NSNAME]]"

$NSNAME is the name of the pmem namespace.
$LABEL represents one resource class, this is used to generate
the resource class name as CUSTOM_PMEM_NAMESPACE_$LABEL.

For example:

[libvirt]
pmem_namespaces=128G:ns0|ns1|ns2|ns3,262144MB:ns4|ns5,MEDIUM:ns6|ns7

swtpm_enabled¶

Type: boolean
Default: False

Enable emulated TPM (Trusted Platform Module) in guests.

swtpm_user¶

Type: string
Default: tss

User that swtpm binary runs as.

When using emulated TPM, the swtpm binary will run to emulate a TPM device. The user this binary runs as depends on libvirt configuration, with tss being the default.

In order to support cold migration and resize, nova needs to know what user the swtpm binary is running as in order to ensure that files get the proper ownership after being moved between nodes.

Related options:

swtpm_group must also be set.

swtpm_group¶

Type: string
Default: tss

Group that swtpm binary runs as.

When using emulated TPM, the swtpm binary will run to emulate a TPM device. The user this binary runs as depends on libvirt configuration, with tss being the default.

In order to support cold migration and resize, nova needs to know what group the swtpm binary is running as in order to ensure that files get the proper ownership after being moved between nodes.

Related options:

swtpm_user must also be set.

metrics¶

Configuration options for metrics

Options under this group allow to adjust how values assigned to metrics are calculated.

weight_multiplier¶

Type: floating point
Default: 1.0

Multiplier used for weighing hosts based on reported metrics.

When using metrics to weight the suitability of a host, you can use this option to change how the calculated weight influences the weight assigned to a host as follows:

>1.0: increases the effect of the metric on overall weight
1.0: no change to the calculated weight
>0.0,<1.0: reduces the effect of the metric on overall weight
0.0: the metric value is ignored, and the value of the [metrics] weight_of_unavailable option is returned instead
>-1.0,<0.0: the effect is reduced and reversed
-1.0: the effect is reversed
<-1.0: the effect is increased proportionally and reversed

Possible values:

An integer or float value, where the value corresponds to the multipler ratio for this weigher.

Related options:

[filter_scheduler] weight_classes
[metrics] weight_of_unavailable

weight_setting¶

Type: list
Default: []

Mapping of metric to weight modifier.

This setting specifies the metrics to be weighed and the relative ratios for each metric. This should be a single string value, consisting of a series of one or more ‘name=ratio’ pairs, separated by commas, where name is the name of the metric to be weighed, and ratio is the relative weight for that metric.

Note that if the ratio is set to 0, the metric value is ignored, and instead the weight will be set to the value of the [metrics] weight_of_unavailable option.

As an example, let’s consider the case where this option is set to:

name1=1.0, name2=-1.3

The final weight will be:

(name1.value * 1.0) + (name2.value * -1.3)

Possible values:

A list of zero or more key/value pairs separated by commas, where the key is a string representing the name of a metric and the value is a numeric weight for that metric. If any value is set to 0, the value is ignored and the weight will be set to the value of the [metrics] weight_of_unavailable option.

Related options:

[metrics] weight_of_unavailable

required¶

Type: boolean
Default: True

Whether metrics are required.

This setting determines how any unavailable metrics are treated. If this option is set to True, any hosts for which a metric is unavailable will raise an exception, so it is recommended to also use the MetricFilter to filter out those hosts before weighing.

Possible values:

A boolean value, where False ensures any metric being unavailable for a host will set the host weight to [metrics] weight_of_unavailable.

Related options:

[metrics] weight_of_unavailable

weight_of_unavailable¶

Type: floating point
Default: -10000.0

Default weight for unavailable metrics.

When any of the following conditions are met, this value will be used in place of any actual metric value:

One of the metrics named in [metrics] weight_setting is not available for a host, and the value of required is False.
The ratio specified for a metric in [metrics] weight_setting is 0.
The [metrics] weight_multiplier option is set to 0.

Possible values:

An integer or float value, where the value corresponds to the multipler ratio for this weigher.

Related options:

[metrics] weight_setting
[metrics] required
[metrics] weight_multiplier

mks¶

Nova compute node uses WebMKS, a desktop sharing protocol to provide instance console access to VM’s created by VMware hypervisors.

Related options: Following options must be set to provide console access. * mksproxy_base_url * enabled

mksproxy_base_url¶

Type: URI
Default: http://127.0.0.1:6090/

Location of MKS web console proxy

The URL in the response points to a WebMKS proxy which starts proxying between client and corresponding vCenter server where instance runs. In order to use the web based console access, WebMKS proxy should be installed and configured

Possible values:

Must be a valid URL of the form:http://host:port/ or https://host:port/

enabled¶

Type: boolean
Default: False

Enables graphical console access for virtual machines.

neutron¶

Configuration options for neutron (network connectivity as a service).

ovs_bridge¶

Type: string
Default: br-int

Default name for the Open vSwitch integration bridge.

Specifies the name of an integration bridge interface used by OpenvSwitch. This option is only used if Neutron does not specify the OVS bridge name in port binding responses.

default_floating_pool¶

Type: string
Default: nova

Default name for the floating IP pool.

Specifies the name of floating IP pool used for allocating floating IPs. This option is only used if Neutron does not specify the floating IP pool name in port binding reponses.

extension_sync_interval¶

Type: integer
Default: 600
Minimum Value: 0

Integer value representing the number of seconds to wait before querying Neutron for extensions. After this number of seconds the next time Nova needs to create a resource in Neutron it will requery Neutron for the extensions that it has loaded. Setting value to 0 will refresh the extensions with no wait.

physnets¶

Type: list
Default: []

List of physnets present on this host.

For each physnet listed, an additional section, [neutron_physnet_$PHYSNET], will be added to the configuration file. Each section must be configured with a single configuration option, numa_nodes, which should be a list of node IDs for all NUMA nodes this physnet is associated with. For example:

[neutron]
physnets = foo, bar

[neutron_physnet_foo]
numa_nodes = 0

[neutron_physnet_bar]
numa_nodes = 0,1

Any physnet that is not listed using this option will be treated as having no particular NUMA node affinity.

Tunnelled networks (VXLAN, GRE, …) cannot be accounted for in this way and are instead configured using the [neutron_tunnel] group. For example:

[neutron_tunnel]
numa_nodes = 1

Related options:

[neutron_tunnel] numa_nodes can be used to configure NUMA affinity for all tunneled networks
[neutron_physnet_$PHYSNET] numa_nodes must be configured for each value of $PHYSNET specified by this option

http_retries¶

Type: integer
Default: 3
Minimum Value: 0

Number of times neutronclient should retry on any failed http call.

0 means connection is attempted only once. Setting it to any positive integer means that on failure connection is retried that many times e.g. setting it to 3 means total attempts to connect will be 4.

Possible values:

Any integer value. 0 means connection is attempted only once

service_metadata_proxy¶

Type: boolean
Default: False

When set to True, this option indicates that Neutron will be used to proxy metadata requests and resolve instance ids. Otherwise, the instance ID must be passed to the metadata request in the ‘X-Instance-ID’ header.

Related options:

metadata_proxy_shared_secret

metadata_proxy_shared_secret¶

Type: string
Default: ''

This option holds the shared secret string used to validate proxy requests to Neutron metadata requests. In order to be used, the ‘X-Metadata-Provider-Signature’ header must be supplied in the request.

Related options:

service_metadata_proxy

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
neutron	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

auth_url¶

Type: unknown type
Default: <None>

Authentication URL

system_scope¶

Type: unknown type
Default: <None>

Scope for system operations

domain_id¶

Type: unknown type
Default: <None>

Domain ID to scope to

domain_name¶

Type: unknown type
Default: <None>

Domain name to scope to

project_id¶

Type: unknown type
Default: <None>

Project ID to scope to

project_name¶

Type: unknown type
Default: <None>

Project name to scope to

project_domain_id¶

Type: unknown type
Default: <None>

Domain ID containing project

project_domain_name¶

Type: unknown type
Default: <None>

Domain name containing project

trust_id¶

Type: unknown type
Default: <None>

Trust ID

default_domain_id¶

Type: unknown type
Default: <None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name¶

Type: unknown type
Default: <None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

user_id¶

Type: unknown type
Default: <None>

User ID

username¶

Type: unknown type
Default: <None>

Username

Deprecated Variations¶
Group	Name
neutron	user-name
neutron	user_name

user_domain_id¶

Type: unknown type
Default: <None>

User’s domain id

user_domain_name¶

Type: unknown type
Default: <None>

User’s domain name

password¶

Type: unknown type
Default: <None>

User’s password

tenant_id¶

Type: unknown type
Default: <None>

Tenant ID

tenant_name¶

Type: unknown type
Default: <None>

Tenant Name

service_type¶

Type: string
Default: network

The default service_type for endpoint URL discovery.

service_name¶

Type: string
Default: <None>

The default service_name for endpoint URL discovery.

valid_interfaces¶

Type: list
Default: ['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

region_name¶

Type: string
Default: <None>

The default region_name for endpoint URL discovery.

endpoint_override¶

Type: string
Default: <None>

connect_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

status_code_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

notifications¶

Most of the actions in Nova which manipulate the system state generate notifications which are posted to the messaging component (e.g. RabbitMQ) and can be consumed by any service outside the OpenStack. More technical details at https://docs.openstack.org/nova/latest/reference/notifications.html

notify_on_state_change¶

Type: string
Default: <None>
Valid Values: <None>, vm_state, vm_and_task_state

If set, send compute.instance.update notifications on instance state changes.

Please refer to https://docs.openstack.org/nova/latest/reference/notifications.html for additional information on notifications.

Possible values

<None>: no notifications
vm_state: Notifications are sent with VM state transition information in the old_state and state fields. The old_task_state and new_task_state fields will be set to the current task_state of the instance
vm_and_task_state: Notifications are sent with VM and task state transition information

Deprecated Variations¶
Group	Name
DEFAULT	notify_on_state_change

default_level¶

Type: string
Default: INFO
Valid Values: DEBUG, INFO, WARN, ERROR, CRITICAL

Default notification level for outgoing notifications.

Deprecated Variations¶
Group	Name
DEFAULT	default_notification_level

notification_format¶

Type: string
Default: unversioned
Valid Values: both, versioned, unversioned

Specifies which notification format shall be emitted by nova.

The versioned notification interface are in feature parity with the legacy interface and the versioned interface is actively developed so new consumers should used the versioned interface.

However, the legacy interface is heavily used by ceilometer and other mature OpenStack components so it remains the default.

Note that notifications can be completely disabled by setting driver=noop in the [oslo_messaging_notifications] group.

The list of versioned notifications is visible in https://docs.openstack.org/nova/latest/reference/notifications.html

Possible values

both: Both the legacy unversioned and the new versioned notifications are emitted
versioned: Only the new versioned notifications are emitted
unversioned: Only the legacy unversioned notifications are emitted

Deprecated Variations¶
Group	Name
DEFAULT	notification_format

versioned_notifications_topics¶

Type: list
Default: ['versioned_notifications']

Specifies the topics for the versioned notifications issued by nova.

The default value is fine for most deployments and rarely needs to be changed. However, if you have a third-party service that consumes versioned notifications, it might be worth getting a topic for that service. Nova will send a message containing a versioned notification payload to each topic queue in this list.

The list of versioned notifications is visible in https://docs.openstack.org/nova/latest/reference/notifications.html

bdms_in_notifications¶

Type: boolean
Default: False

If enabled, include block device information in the versioned notification payload. Sending block device information is disabled by default as providing that information can incur some overhead on the system since the information may need to be loaded from the database.

oslo_concurrency¶

disable_process_locking¶

Type: boolean
Default: False

Enables or disables inter-process locks.

Deprecated Variations¶
Group	Name
DEFAULT	disable_process_locking

lock_path¶

Type: string
Default: <None>

Directory to use for lock files. For security, the specified directory should only be writable by the user running the processes that need locking. Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, a lock path must be set.

Deprecated Variations¶
Group	Name
DEFAULT	lock_path

oslo_messaging_amqp¶

container_name¶

Type: string
Default: <None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations¶
Group	Name
amqp1	container_name

idle_timeout¶

Type: integer
Default: 0

Timeout for inactive connections (in seconds)

Deprecated Variations¶
Group	Name
amqp1	idle_timeout

trace¶

Type: boolean
Default: False

Debug: dump AMQP frames to stdout

Deprecated Variations¶
Group	Name
amqp1	trace

ssl¶

Type: boolean
Default: False

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file¶

Type: string
Default: ''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations¶
Group	Name
amqp1	ssl_ca_file

ssl_cert_file¶

Type: string
Default: ''

Self-identifying certificate PEM file for client authentication

Deprecated Variations¶
Group	Name
amqp1	ssl_cert_file

ssl_key_file¶

Type: string
Default: ''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_file

ssl_key_password¶

Type: string
Default: <None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_password

ssl_verify_vhost¶

Type: boolean
Default: False

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

sasl_mechanisms¶

Type: string
Default: ''

Space separated list of acceptable SASL mechanisms

Deprecated Variations¶
Group	Name
amqp1	sasl_mechanisms

sasl_config_dir¶

Type: string
Default: ''

Path to directory that contains the SASL configuration

Deprecated Variations¶
Group	Name
amqp1	sasl_config_dir

sasl_config_name¶

Type: string
Default: ''

Name of configuration file (without .conf suffix)

Deprecated Variations¶
Group	Name
amqp1	sasl_config_name

sasl_default_realm¶

Type: string
Default: ''

SASL realm to use if no realm present in username

connection_retry_interval¶

Type: integer
Default: 1
Minimum Value: 1

Seconds to pause before attempting to re-connect.

connection_retry_backoff¶

Type: integer
Default: 2
Minimum Value: 0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max¶

Type: integer
Default: 30
Minimum Value: 1

Maximum limit for connection_retry_interval + connection_retry_backoff

link_retry_delay¶

Type: integer
Default: 10
Minimum Value: 1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry¶

Type: integer
Default: 0
Minimum Value: -1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for an rpc reply message delivery.

default_send_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout¶

Type: integer
Default: 30
Minimum Value: 5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout¶

Type: integer
Default: 600
Minimum Value: 1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode¶

Type: string
Default: dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost¶

Type: boolean
Default: True

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix¶

Type: string
Default: exclusive

address prefix used when sending to a specific server

Deprecated Variations¶
Group	Name
amqp1	server_request_prefix

broadcast_prefix¶

Type: string
Default: broadcast

address prefix used when broadcasting to all servers

Deprecated Variations¶
Group	Name
amqp1	broadcast_prefix

group_request_prefix¶

Type: string
Default: unicast

address prefix when sending to any server in group

Deprecated Variations¶
Group	Name
amqp1	group_request_prefix

rpc_address_prefix¶

Type: string
Default: openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix¶

Type: string
Default: openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address¶

Type: string
Default: multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address¶

Type: string
Default: unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address¶

Type: string
Default: anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange¶

Type: string
Default: <None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange¶

Type: string
Default: <None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

reply_link_credit¶

Type: integer
Default: 200
Minimum Value: 1

Window size for incoming RPC Reply messages.

rpc_server_credit¶

Type: integer
Default: 100
Minimum Value: 1

Window size for incoming RPC Request messages

notify_server_credit¶

Type: integer
Default: 100
Minimum Value: 1

Window size for incoming Notification messages

pre_settled¶

Type: multi-valued
Default: rpc-cast
Default: rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

oslo_messaging_kafka¶

kafka_max_fetch_bytes¶

Type: integer
Default: 1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout¶

Type: floating point
Default: 1.0

Default timeout(s) for Kafka consumers

pool_size¶

Type: integer
Default: 10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

conn_pool_min_size¶

Type: integer
Default: 2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

conn_pool_ttl¶

Type: integer
Default: 1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Driver no longer uses connection pool.

consumer_group¶

Type: string
Default: oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout¶

Type: floating point
Default: 0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size¶

Type: integer
Default: 16384

Size of batch for the producer async send

compression_codec¶

Type: string
Default: none
Valid Values: none, gzip, snappy, lz4, zstd

The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version

enable_auto_commit¶

Type: boolean
Default: False

Enable asynchronous consumer commits

max_poll_records¶

Type: integer
Default: 500

The maximum number of records returned in a poll call

security_protocol¶

Type: string
Default: PLAINTEXT
Valid Values: PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism¶

Type: string
Default: PLAIN

Mechanism when security protocol is SASL

ssl_cafile¶

Type: string
Default: ''

CA certificate PEM file used to verify the server certificate

ssl_client_cert_file¶

Type: string
Default: ''

Client certificate PEM file used for authentication.

ssl_client_key_file¶

Type: string
Default: ''

Client key PEM file used for authentication.

ssl_client_key_password¶

Type: string
Default: ''

Client key password file used for authentication.

oslo_messaging_notifications¶

driver¶

Type: multi-valued
Default: ''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations¶
Group	Name
DEFAULT	notification_driver

transport_url¶

Type: string
Default: <None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations¶
Group	Name
DEFAULT	notification_transport_url

topics¶

Type: list
Default: ['notifications']

AMQP topic used for OpenStack notifications.

Deprecated Variations¶
Group	Name
rpc_notifier2	topics
DEFAULT	notification_topics

retry¶

Type: integer
Default: -1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

oslo_messaging_rabbit¶

amqp_durable_queues¶

Type: boolean
Default: False

Use durable queues in AMQP.

amqp_auto_delete¶

Type: boolean
Default: False

Auto-delete queues in AMQP.

Deprecated Variations¶
Group	Name
DEFAULT	amqp_auto_delete

ssl¶

Type: boolean
Default: False

Connect over SSL.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	rabbit_use_ssl

ssl_version¶

Type: string
Default: ''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_version

ssl_key_file¶

Type: string
Default: ''

SSL key file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_keyfile

ssl_cert_file¶

Type: string
Default: ''

SSL cert file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_certfile

ssl_ca_file¶

Type: string
Default: ''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_ca_certs

heartbeat_in_pthread¶

Type: boolean
Default: True

Run the health check heartbeat thread through a native python thread by default. If this option is equal to False then the health check heartbeat will inherit the execution model from the parent process. For example if the parent process has monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

kombu_reconnect_delay¶

Type: floating point
Default: 1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations¶
Group	Name
DEFAULT	kombu_reconnect_delay

kombu_compression¶

Type: string
Default: <None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout¶

Type: integer
Default: 60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_reconnect_timeout

kombu_failover_strategy¶

Type: string
Default: round-robin
Valid Values: round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_login_method¶

Type: string
Default: AMQPLAIN
Valid Values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_login_method

rabbit_retry_interval¶

Type: integer
Default: 1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff¶

Type: integer
Default: 2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_retry_backoff

rabbit_interval_max¶

Type: integer
Default: 30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_ha_queues¶

Type: boolean
Default: False

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_ha_queues

rabbit_transient_queues_ttl¶

Type: integer
Default: 1800
Minimum Value: 1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count¶

Type: integer
Default: 0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold¶

Type: integer
Default: 60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).

heartbeat_rate¶

Type: integer
Default: 2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

direct_mandatory_flag¶

Type: boolean
Default: True

(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason: Mandatory flag no longer deactivable.

enable_cancel_on_failover¶

Type: boolean
Default: False

Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down

oslo_middleware¶

max_request_body_size¶

Type: integer
Default: 114688

The maximum body size for each request, in bytes.

Deprecated Variations¶
Group	Name
DEFAULT	osapi_max_request_body_size
DEFAULT	max_request_body_size

secure_proxy_ssl_header¶

Type: string
Default: X-Forwarded-Proto

The HTTP Header that will be used to determine what the original request protocol scheme was, even if it was hidden by a SSL termination proxy.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

enable_proxy_headers_parsing¶

Type: boolean
Default: False

Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.

oslo_policy¶

enforce_scope¶

Type: boolean
Default: False

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

enforce_new_defaults¶

Type: boolean
Default: False

This option controls whether or not to use old deprecated defaults when evaluating policies. If True, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with the enforce_scope flag so that you can get the benefits of new defaults and scope_type together

policy_file¶

Type: string
Default: policy.yaml

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

Deprecated Variations¶
Group	Name
DEFAULT	policy_file

policy_default_rule¶

Type: string
Default: default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations¶
Group	Name
DEFAULT	policy_default_rule

policy_dirs¶

Type: multi-valued
Default: policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations¶
Group	Name
DEFAULT	policy_dirs

remote_content_type¶

Type: string
Default: application/x-www-form-urlencoded
Valid Values: application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt¶

Type: boolean
Default: False

server identity verification for REST based policy check

remote_ssl_ca_crt_file¶

Type: string
Default: <None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file¶

Type: string
Default: <None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file¶

Type: string
Default: <None>

Absolute path client key file REST based policy check

pci¶

alias¶

Type: multi-valued
Default: ''

An alias for a PCI passthrough device requirement.

This allows users to specify the alias in the extra specs for a flavor, without needing to repeat all the PCI property requirements.

This should be configured for the nova-api service and, assuming you wish to use move operations, for each nova-compute service.

Possible Values:

A dictionary of JSON values which describe the aliases. For example:
```
alias = {
  "name": "QuickAssist",
  "product_id": "0443",
  "vendor_id": "8086",
  "device_type": "type-PCI",
  "numa_policy": "required"
}
```
This defines an alias for the Intel QuickAssist card. (multi valued). Valid key values are :

name
Name of the PCI alias.

product_id
Product ID of the device in hexadecimal.

vendor_id
Vendor ID of the device in hexadecimal.

device_type
Type of PCI device. Valid values are: type-PCI, type-PF and type-VF. Note that "device_type": "type-PF" must be specified if you wish to passthrough a device that supports SR-IOV in its entirety.

numa_policy
Required NUMA affinity of device. Valid values are: legacy, preferred and required.

Supports multiple aliases by repeating the option (not by specifying a list value):

alias = {
  "name": "QuickAssist-1",
  "product_id": "0443",
  "vendor_id": "8086",
  "device_type": "type-PCI",
  "numa_policy": "required"
}
alias = {
  "name": "QuickAssist-2",
  "product_id": "0444",
  "vendor_id": "8086",
  "device_type": "type-PCI",
  "numa_policy": "required"
}

Deprecated Variations¶
Group	Name
DEFAULT	pci_alias

passthrough_whitelist¶

Type: multi-valued
Default: ''

White list of PCI devices available to VMs.

Possible values:

A JSON dictionary which describe a whitelisted PCI device. It should take the following format:

["vendor_id": "<id>",] ["product_id": "<id>",]
["address": "[[[[<domain>]:]<bus>]:][<slot>][.[<function>]]" |
 "devname": "<name>",]
{"<tag>": "<tag_value>",}

Where [ indicates zero or one occurrences, { indicates zero or multiple occurrences, and | mutually exclusive options. Note that any missing fields are automatically wildcarded.

Valid key values are :

vendor_id

Vendor ID of the device in hexadecimal.

product_id

Product ID of the device in hexadecimal.

address

PCI address of the device. Both traditional glob style and regular expression syntax is supported. Please note that the address fields are restricted to the following maximum values:

domain - 0xFFFF
bus - 0xFF
slot - 0x1F
function - 0x7

devname

Device name of the device (for e.g. interface name). Not all PCI devices have a name.

<tag>

Additional <tag> and <tag_value> used for matching PCI devices. Supported <tag> values are :

physical_network
trusted

Valid examples are:

passthrough_whitelist = {"devname":"eth0",
                         "physical_network":"physnet"}
passthrough_whitelist = {"address":"*:0a:00.*"}
passthrough_whitelist = {"address":":0a:00.",
                         "physical_network":"physnet1"}
passthrough_whitelist = {"vendor_id":"1137",
                         "product_id":"0071"}
passthrough_whitelist = {"vendor_id":"1137",
                         "product_id":"0071",
                         "address": "0000:0a:00.1",
                         "physical_network":"physnet1"}
passthrough_whitelist = {"address":{"domain": ".*",
                                    "bus": "02", "slot": "01",
                                    "function": "[2-7]"},
                         "physical_network":"physnet1"}
passthrough_whitelist = {"address":{"domain": ".*",
                                    "bus": "02", "slot": "0[1-2]",
                                    "function": ".*"},
                         "physical_network":"physnet1"}
passthrough_whitelist = {"devname": "eth0", "physical_network":"physnet1",
                         "trusted": "true"}

The following are invalid, as they specify mutually exclusive options:

passthrough_whitelist = {"devname":"eth0",
                         "physical_network":"physnet",
                         "address":"*:0a:00.*"}

A JSON list of JSON dictionaries corresponding to the above format. For example:

passthrough_whitelist = [{"product_id":"0001", "vendor_id":"8086"},
                         {"product_id":"0002", "vendor_id":"8086"}]

Deprecated Variations¶
Group	Name
DEFAULT	pci_passthrough_whitelist

placement¶

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
placement	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

auth_url¶

Type: unknown type
Default: <None>

Authentication URL

system_scope¶

Type: unknown type
Default: <None>

Scope for system operations

domain_id¶

Type: unknown type
Default: <None>

Domain ID to scope to

domain_name¶

Type: unknown type
Default: <None>

Domain name to scope to

project_id¶

Type: unknown type
Default: <None>

Project ID to scope to

project_name¶

Type: unknown type
Default: <None>

Project name to scope to

project_domain_id¶

Type: unknown type
Default: <None>

Domain ID containing project

project_domain_name¶

Type: unknown type
Default: <None>

Domain name containing project

trust_id¶

Type: unknown type
Default: <None>

Trust ID

default_domain_id¶

Type: unknown type
Default: <None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name¶

Type: unknown type
Default: <None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

user_id¶

Type: unknown type
Default: <None>

User ID

username¶

Type: unknown type
Default: <None>

Username

Deprecated Variations¶
Group	Name
placement	user-name
placement	user_name

user_domain_id¶

Type: unknown type
Default: <None>

User’s domain id

user_domain_name¶

Type: unknown type
Default: <None>

User’s domain name

password¶

Type: unknown type
Default: <None>

User’s password

tenant_id¶

Type: unknown type
Default: <None>

Tenant ID

tenant_name¶

Type: unknown type
Default: <None>

Tenant Name

service_type¶

Type: string
Default: placement

The default service_type for endpoint URL discovery.

service_name¶

Type: string
Default: <None>

The default service_name for endpoint URL discovery.

valid_interfaces¶

Type: list
Default: ['internal', 'public']

List of interfaces, in order of preference, for endpoint URL.

region_name¶

Type: string
Default: <None>

The default region_name for endpoint URL discovery.

endpoint_override¶

Type: string
Default: <None>

connect_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for connection errors.

connect_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for connection errors. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

status_code_retries¶

Type: integer
Default: <None>

The maximum number of retries that should be attempted for retriable HTTP status codes.

status_code_retry_delay¶

Type: floating point
Default: <None>

Delay (in seconds) between two retries for retriable status codes. If not set, exponential retry starting with 0.5 seconds up to a maximum of 60 seconds is used.

powervm¶

PowerVM options allow cloud administrators to configure how OpenStack will work with the PowerVM hypervisor.

proc_units_factor¶

Type: floating point
Default: 0.1
Minimum Value: 0.05
Maximum Value: 1

Factor used to calculate the amount of physical processor compute power given to each vCPU. E.g. A value of 1.0 means a whole physical processor, whereas 0.05 means 1/20th of a physical processor.

disk_driver¶

Type: string
Default: localdisk
Valid Values: localdisk, ssp

The disk driver to use for PowerVM disks. PowerVM provides support for localdisk and PowerVM Shared Storage Pool disk drivers.

Related options:

volume_group_name - required when using localdisk

volume_group_name¶

Type: string
Default: ''

Volume Group to use for block device operations. If disk_driver is localdisk, then this attribute must be specified. It is strongly recommended NOT to use rootvg since that is used by the management partition and filling it will cause failures.

privsep¶

Configuration options for the oslo.privsep daemon. Note that this group name can be changed by the consuming service. Check the service’s docs to see if this is the case.

user¶

Type: string
Default: <None>

User that the privsep daemon should run as.

group¶

Type: string
Default: <None>

Group that the privsep daemon should run as.

capabilities¶

Type: unknown type
Default: []

List of Linux capabilities retained by the privsep daemon.

thread_pool_size¶

Type: integer
Default: multiprocessing.cpu_count()
Minimum Value: 1

This option has a sample default set, which means that its actual default value may vary from the one documented above.

The number of threads available for privsep to concurrently run processes. Defaults to the number of CPU cores in the system.

helper_command¶

Type: string
Default: <None>

Command to invoke to start the privsep daemon if not using the “fork” method. If not specified, a default is generated using “sudo privsep-helper” and arguments designed to recreate the current configuration. This command must accept suitable –privsep_context and –privsep_sock_path arguments.

profiler¶

enabled¶

Type: boolean
Default: False

Enable the profiling for all services on this node.

Default value is False (fully disable the profiling feature).

Possible values:

True: Enables the feature
False: Disables the feature. The profiling cannot be started via this project operations. If the profiling is triggered by another project, this project part will be empty.

Deprecated Variations¶
Group	Name
profiler	profiler_enabled

trace_sqlalchemy¶

Type: boolean
Default: False

Enable SQL requests profiling in services.

Default value is False (SQL requests won’t be traced).

Possible values:

True: Enables SQL requests profiling. Each SQL query will be part of the trace and can the be analyzed by how much time was spent for that.
False: Disables SQL requests profiling. The spent time is only shown on a higher level of operations. Single SQL queries cannot be analyzed this way.

hmac_keys¶

Type: string
Default: SECRET_KEY

Secret key(s) to use for encrypting context data for performance profiling.

This string value should have the following format: <key1>[,<key2>,…<keyn>], where each key is some random string. A user who triggers the profiling via the REST API has to set one of these keys in the headers of the REST API call to include profiling results of this node for this particular project.

Both “enabled” flag and “hmac_keys” config options should be set to enable profiling. Also, to generate correct profiling information across all services at least one key needs to be consistent between OpenStack projects. This ensures it can be used from client side to generate the trace, containing information from all possible resources.

connection_string¶

Type: string
Default: messaging://

Connection string for a notifier backend.

Default value is messaging:// which sets the notifier to oslo_messaging.

Examples of possible values:

messaging:// - use oslo_messaging driver for sending spans.
redis://127.0.0.1:6379 - use redis driver for sending spans.
mongodb://127.0.0.1:27017 - use mongodb driver for sending spans.
elasticsearch://127.0.0.1:9200 - use elasticsearch driver for sending spans.
jaeger://127.0.0.1:6831 - use jaeger tracing as driver for sending spans.

es_doc_type¶

Type: string
Default: notification

Document type for notification indexing in elasticsearch.

es_scroll_time¶

Type: string
Default: 2m

This parameter is a time value parameter (for example: es_scroll_time=2m), indicating for how long the nodes that participate in the search will maintain relevant resources in order to continue and support it.

es_scroll_size¶

Type: integer
Default: 10000

Elasticsearch splits large requests in batches. This parameter defines maximum size of each batch (for example: es_scroll_size=10000).

socket_timeout¶

Type: floating point
Default: 0.1

Redissentinel provides a timeout option on the connections. This parameter defines that timeout (for example: socket_timeout=0.1).

sentinel_service_name¶

Type: string
Default: mymaster

Redissentinel uses a service name to identify a master redis service. This parameter defines the name (for example: sentinal_service_name=mymaster).

filter_error_trace¶

Type: boolean
Default: False

Enable filter traces that contain error/exception to a separated place.

Default value is set to False.

Possible values:

True: Enable filter traces that contain error/exception.
False: Disable the filter.

quota¶

Quota options allow to manage quotas in openstack deployment.

instances¶

Type: integer
Default: 10
Minimum Value: -1

The number of instances allowed per project.

Possible Values

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_instances

cores¶

Type: integer
Default: 20
Minimum Value: -1

The number of instance cores or vCPUs allowed per project.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_cores

ram¶

Type: integer
Default: 51200
Minimum Value: -1

The number of megabytes of instance RAM allowed per project.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_ram

metadata_items¶

Type: integer
Default: 128
Minimum Value: -1

The number of metadata items allowed per instance.

Users can associate metadata with an instance during instance creation. This metadata takes the form of key-value pairs.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_metadata_items

injected_files¶

Type: integer
Default: 5
Minimum Value: -1

The number of injected files allowed.

File injection allows users to customize the personality of an instance by injecting data into it upon boot. Only text file injection is permitted: binary or ZIP files are not accepted. During file injection, any existing files that match specified files are renamed to include .bak extension appended with a timestamp.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_injected_files

injected_file_content_bytes¶

Type: integer
Default: 10240
Minimum Value: -1

The number of bytes allowed per injected file.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_injected_file_content_bytes

injected_file_path_length¶

Type: integer
Default: 255
Minimum Value: -1

The maximum allowed injected file path length.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_injected_file_path_length

key_pairs¶

Type: integer
Default: 100
Minimum Value: -1

The maximum number of key pairs allowed per user.

Users can create at least one key pair for each project and use the key pair for multiple instances that belong to that project.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_key_pairs

server_groups¶

Type: integer
Default: 10
Minimum Value: -1

The maxiumum number of server groups per project.

Server groups are used to control the affinity and anti-affinity scheduling policy for a group of servers or instances. Reducing the quota will not affect any existing group, but new servers will not be allowed into groups that have become over quota.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_server_groups

server_group_members¶

Type: integer
Default: 10
Minimum Value: -1

The maximum number of servers per server group.

Possible values:

A positive integer or 0.
-1 to disable the quota.

Deprecated Variations¶
Group	Name
DEFAULT	quota_server_group_members

driver¶

Type: string
Default: nova.quota.DbQuotaDriver
Valid Values: nova.quota.DbQuotaDriver, nova.quota.NoopQuotaDriver

Provides abstraction for quota checks. Users can configure a specific driver to use for quota checks.

Possible values

nova.quota.DbQuotaDriver: Stores quota limit information in the database and relies on the quota_* configuration options for default quota limit values. Counts quota usage on-demand.
nova.quota.NoopQuotaDriver: Ignores quota and treats all resources as unlimited.

recheck_quota¶

Type: boolean
Default: True

Recheck quota after resource creation to prevent allowing quota to be exceeded.

This defaults to True (recheck quota after resource creation) but can be set to False to avoid additional load if allowing quota to be exceeded because of racing requests is considered acceptable. For example, when set to False, if a user makes highly parallel REST API requests to create servers, it will be possible for them to create more servers than their allowed quota during the race. If their quota is 10 servers, they might be able to create 50 during the burst. After the burst, they will not be able to create any more servers but they will be able to keep their 50 servers until they delete them.

The initial quota check is done before resources are created, so if multiple parallel requests arrive at the same time, all could pass the quota check and create resources, potentially exceeding quota. When recheck_quota is True, quota will be checked a second time after resources have been created and if the resource is over quota, it will be deleted and OverQuota will be raised, usually resulting in a 403 response to the REST API user. This makes it impossible for a user to exceed their quota with the caveat that it will, however, be possible for a REST API user to be rejected with a 403 response in the event of a collision close to reaching their quota limit, even if the user has enough quota available when they made the request.

count_usage_from_placement¶

Type: boolean
Default: False

Enable the counting of quota usage from the placement service.

Starting in Train, it is possible to count quota usage for cores and ram from the placement service and instances from the API database instead of counting from cell databases.

This works well if there is only one Nova deployment running per placement deployment. However, if an operator is running more than one Nova deployment sharing a placement deployment, they should not set this option to True because currently the placement service has no way to partition resource providers per Nova deployment. When this option is left as the default or set to False, Nova will use the legacy counting method to count quota usage for instances, cores, and ram from its cell databases.

Note that quota usage behavior related to resizes will be affected if this option is set to True. Placement resource allocations are claimed on the destination while holding allocations on the source during a resize, until the resize is confirmed or reverted. During this time, when the server is in VERIFY_RESIZE state, quota usage will reflect resource consumption on both the source and the destination. This can be beneficial as it reserves space for a revert of a downsize, but it also means quota usage will be inflated until a resize is confirmed or reverted.

Behavior will also be different for unscheduled servers in ERROR state. A server in ERROR state that has never been scheduled to a compute host will not have placement allocations, so it will not consume quota usage for cores and ram.

Behavior will be different for servers in SHELVED_OFFLOADED state. A server in SHELVED_OFFLOADED state will not have placement allocations, so it will not consume quota usage for cores and ram. Note that because of this, it will be possible for a request to unshelve a server to be rejected if the user does not have enough quota available to support the cores and ram needed by the server to be unshelved.

The populate_queued_for_delete and populate_user_id online data migrations must be completed before usage can be counted from placement. Until the data migration is complete, the system will fall back to legacy quota usage counting from cell databases depending on the result of an EXISTS database query during each quota check, if this configuration option is set to True. Operators who want to avoid the performance hit from the EXISTS queries should wait to set this configuration option to True until after they have completed their online data migrations via nova-manage db online_data_migrations.

rdp¶

Options under this group enable and configure Remote Desktop Protocol ( RDP) related features.

This group is only relevant to Hyper-V users.

enabled¶

Type: boolean
Default: False

Enable Remote Desktop Protocol (RDP) related features.

Hyper-V, unlike the majority of the hypervisors employed on Nova compute nodes, uses RDP instead of VNC and SPICE as a desktop sharing protocol to provide instance console access. This option enables RDP for graphical console access for virtual machines created by Hyper-V.

Note: RDP should only be enabled on compute nodes that support the Hyper-V virtualization platform.

Related options:

compute_driver: Must be hyperv.

html5_proxy_base_url¶

Type: URI
Default: http://127.0.0.1:6083/

The URL an end user would use to connect to the RDP HTML5 console proxy. The console proxy service is called with this token-embedded URL and establishes the connection to the proper instance.

An RDP HTML5 console proxy service will need to be configured to listen on the address configured here. Typically the console proxy service would be run on a controller node. The localhost address used as default would only work in a single node environment i.e. devstack.

An RDP HTML5 proxy allows a user to access via the web the text or graphical console of any Windows server or workstation using RDP. RDP HTML5 console proxy services include FreeRDP, wsgate. See https://github.com/FreeRDP/FreeRDP-WebConnect

Possible values:

<scheme>://<ip-address>:<port-number>/

The scheme must be identical to the scheme configured for the RDP HTML5 console proxy service. It is http or https.

The IP address must be identical to the address on which the RDP HTML5 console proxy service is listening.

The port must be identical to the port on which the RDP HTML5 console proxy service is listening.

Related options:

rdp.enabled: Must be set to True for html5_proxy_base_url to be effective.

remote_debug¶

host¶

Type: host address
Default: <None>

Debug host (IP or name) to connect to.

This command line parameter is used when you want to connect to a nova service via a debugger running on a different host.

Note that using the remote debug option changes how nova uses the eventlet library to support async IO. This could result in failures that do not occur under normal operation. Use at your own risk.

Possible Values:

IP address of a remote host as a command line parameter to a nova service. For example:

nova-compute --config-file /etc/nova/nova.conf       --remote_debug-host <IP address of the debugger>

port¶

Type: port number
Default: <None>
Minimum Value: 0
Maximum Value: 65535

Debug port to connect to.

This command line parameter allows you to specify the port you want to use to connect to a nova service via a debugger running on different host.

Note that using the remote debug option changes how nova uses the eventlet library to support async IO. This could result in failures that do not occur under normal operation. Use at your own risk.

Possible Values:

Port number you want to use as a command line parameter to a nova service. For example:

nova-compute --config-file /etc/nova/nova.conf       --remote_debug-host <IP address of the debugger>       --remote_debug-port <port debugger is listening on>.

scheduler¶

max_attempts¶

Type: integer
Default: 3
Minimum Value: 1

The maximum number of schedule attempts.

This is the maximum number of attempts that will be made for a given instance build/move operation. It limits the number of alternate hosts returned by the scheduler. When that list of hosts is exhausted, a MaxRetriesExceeded exception is raised and the instance is set to an error state.

Possible values:

A positive integer, where the integer corresponds to the max number of attempts that can be made when building or moving an instance.

Deprecated Variations¶
Group	Name
DEFAULT	scheduler_max_attempts

discover_hosts_in_cells_interval¶

Type: integer
Default: -1
Minimum Value: -1

Periodic task interval.

This value controls how often (in seconds) the scheduler should attempt to discover new hosts that have been added to cells. If negative (the default), no automatic discovery will occur.

Deployments where compute nodes come and go frequently may want this enabled, where others may prefer to manually discover hosts when one is added to avoid any overhead from constantly checking. If enabled, every time this runs, we will select any unmapped hosts out of each cell database on every run.

Possible values:

An integer, where the integer corresponds to periodic task interval in seconds. 0 uses the default interval (60 seconds). A negative value disables periodic tasks.

max_placement_results¶

Type: integer
Default: 1000
Minimum Value: 1

The maximum number of placement results to request.

This setting determines the maximum limit on results received from the placement service during a scheduling operation. It effectively limits the number of hosts that may be considered for scheduling requests that match a large number of candidates.

A value of 1 (the minimum) will effectively defer scheduling to the placement service strictly on “will it fit” grounds. A higher value will put an upper cap on the number of results the scheduler will consider during the filtering and weighing process. Large deployments may need to set this lower than the total number of hosts available to limit memory consumption, network traffic, etc. of the scheduler.

Possible values:

An integer, where the integer corresponds to the number of placement results to return.

workers¶

Type: integer
Default: <None>
Minimum Value: 0

Number of workers for the nova-scheduler service.

Defaults to the number of CPUs available.

Possible values:

An integer, where the integer corresponds to the number of worker processes.

query_placement_for_routed_network_aggregates¶

Type: boolean
Default: False

Enable the scheduler to filter compute hosts affined to routed network segment aggregates.

See https://docs.openstack.org/neutron/latest/admin/config-routed-networks.html for details.

limit_tenants_to_placement_aggregate¶

Type: boolean
Default: False

Restrict tenants to specific placement aggregates.

This setting causes the scheduler to look up a host aggregate with the metadata key of filter_tenant_id set to the project of an incoming request, and request results from placement be limited to that aggregate. Multiple tenants may be added to a single aggregate by appending a serial number to the key, such as filter_tenant_id:123.

The matching aggregate UUID must be mirrored in placement for proper operation. If no host aggregate with the tenant id is found, or that aggregate does not match one in placement, the result will be the same as not finding any suitable hosts for the request.

Possible values:

A boolean value.

Related options:

[scheduler] placement_aggregate_required_for_tenants

placement_aggregate_required_for_tenants¶

Type: boolean
Default: False

Require a placement aggregate association for all tenants.

This setting, when limit_tenants_to_placement_aggregate=True, will control whether or not a tenant with no aggregate affinity will be allowed to schedule to any available node. If aggregates are used to limit some tenants but not all, then this should be False. If all tenants should be confined via aggregate, then this should be True to prevent them from receiving unrestricted scheduling to any available node.

Possible values:

A boolean value.

Related options:

[scheduler] placement_aggregate_required_for_tenants

query_placement_for_availability_zone¶

Type: boolean
Default: False

Use placement to determine availability zones.

This setting causes the scheduler to look up a host aggregate with the metadata key of availability_zone set to the value provided by an incoming request, and request results from placement be limited to that aggregate.

The matching aggregate UUID must be mirrored in placement for proper operation. If no host aggregate with the availability_zone key is found, or that aggregate does not match one in placement, the result will be the same as not finding any suitable hosts.

Note that if you enable this flag, you can disable the (less efficient) AvailabilityZoneFilter in the scheduler.

Possible values:

A boolean value.

Related options:

[filter_scheduler] enabled_filters

query_placement_for_image_type_support¶

Type: boolean
Default: False

Use placement to determine host support for the instance’s image type.

This setting causes the scheduler to ask placement only for compute hosts that support the disk_format of the image used in the request.

Possible values:

A boolean value.

enable_isolated_aggregate_filtering¶

Type: boolean
Default: False

Restrict use of aggregates to instances with matching metadata.

This setting allows the scheduler to restrict hosts in aggregates based on matching required traits in the aggregate metadata and the instance flavor/image. If an aggregate is configured with a property with key trait:$TRAIT_NAME and value required, the instance flavor extra_specs and/or image metadata must also contain trait:$TRAIT_NAME=required to be eligible to be scheduled to hosts in that aggregate. More technical details at https://docs.openstack.org/nova/latest/reference/isolate-aggregates.html

Possible values:

A boolean value.

image_metadata_prefilter¶

Type: boolean
Default: False

Use placement to filter hosts based on image metadata.

This setting causes the scheduler to transform well known image metadata properties into placement required traits to filter host based on image metadata. This feature requires host support and is currently supported by the following compute drivers:

libvirt.LibvirtDriver (since Ussuri (21.0.0))

Possible values:

A boolean value.

Related options:

[compute] compute_driver

serial_console¶

The serial console feature allows you to connect to a guest in case a graphical console like VNC, RDP or SPICE is not available. This is only currently supported for the libvirt, Ironic and hyper-v drivers.

enabled¶

Type: boolean
Default: False

Enable the serial console feature.

In order to use this feature, the service nova-serialproxy needs to run. This service is typically executed on the controller node.

port_range¶

Type: string
Default: 10000:20000

A range of TCP ports a guest can use for its backend.

Each instance which gets created will use one port out of this range. If the range is not big enough to provide another port for an new instance, this instance won’t get launched.

Possible values:

Each string which passes the regex ^\d+:\d+$ For example 10000:20000. Be sure that the first port number is lower than the second port number and that both are in range from 0 to 65535.

base_url¶

Type: URI
Default: ws://127.0.0.1:6083/

The URL an end user would use to connect to the nova-serialproxy service.

The nova-serialproxy service is called with this token enriched URL and establishes the connection to the proper instance.

Related options:

The IP address must be identical to the address to which the nova-serialproxy service is listening (see option serialproxy_host in this section).
The port must be the same as in the option serialproxy_port of this section.
If you choose to use a secured websocket connection, then start this option with wss:// instead of the unsecured ws://. The options cert and key in the [DEFAULT] section have to be set for that.

proxyclient_address¶

Type: string
Default: 127.0.0.1

The IP address to which proxy clients (like nova-serialproxy) should connect to get the serial console of an instance.

This is typically the IP address of the host of a nova-compute service.

serialproxy_host¶

Type: string
Default: 0.0.0.0

The IP address which is used by the nova-serialproxy service to listen for incoming requests.

The nova-serialproxy service listens on this IP address for incoming connection requests to instances which expose serial console.

Related options:

Ensure that this is the same IP address which is defined in the option base_url of this section or use 0.0.0.0 to listen on all addresses.

serialproxy_port¶

Type: port number
Default: 6083
Minimum Value: 0
Maximum Value: 65535

The port number which is used by the nova-serialproxy service to listen for incoming requests.

The nova-serialproxy service listens on this port number for incoming connection requests to instances which expose serial console.

Related options:

Ensure that this is the same port number which is defined in the option base_url of this section.

service_user¶

Configuration options for service to service authentication using a service token. These options allow sending a service token along with the user’s token when contacting external REST APIs.

send_service_user_token¶

Type: boolean
Default: False

When True, if sending a user token to a REST API, also send a service token.

Nova often reuses the user token provided to the nova-api to talk to other REST APIs, such as Cinder, Glance and Neutron. It is possible that while the user token was valid when the request was made to Nova, the token may expire before it reaches the other service. To avoid any failures, and to make it clear it is Nova calling the service on the user’s behalf, we include a service token along with the user token. Should the user’s token have expired, a valid service token ensures the REST API request will still be accepted by the keystone middleware.

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
service_user	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

auth_url¶

Type: unknown type
Default: <None>

Authentication URL

system_scope¶

Type: unknown type
Default: <None>

Scope for system operations

domain_id¶

Type: unknown type
Default: <None>

Domain ID to scope to

domain_name¶

Type: unknown type
Default: <None>

Domain name to scope to

project_id¶

Type: unknown type
Default: <None>

Project ID to scope to

project_name¶

Type: unknown type
Default: <None>

Project name to scope to

project_domain_id¶

Type: unknown type
Default: <None>

Domain ID containing project

project_domain_name¶

Type: unknown type
Default: <None>

Domain name containing project

trust_id¶

Type: unknown type
Default: <None>

Trust ID

default_domain_id¶

Type: unknown type
Default: <None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name¶

Type: unknown type
Default: <None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

user_id¶

Type: unknown type
Default: <None>

User ID

username¶

Type: unknown type
Default: <None>

Username

Deprecated Variations¶
Group	Name
service_user	user-name
service_user	user_name

user_domain_id¶

Type: unknown type
Default: <None>

User’s domain id

user_domain_name¶

Type: unknown type
Default: <None>

User’s domain name

password¶

Type: unknown type
Default: <None>

User’s password

tenant_id¶

Type: unknown type
Default: <None>

Tenant ID

tenant_name¶

Type: unknown type
Default: <None>

Tenant Name

spice¶

SPICE console feature allows you to connect to a guest virtual machine. SPICE is a replacement for fairly limited VNC protocol.

Following requirements must be met in order to use SPICE:

Virtualization driver must be libvirt
spice.enabled set to True
vnc.enabled set to False
update html5proxy_base_url
update server_proxyclient_address

enabled¶

Type: boolean
Default: False

Enable SPICE related features.

Related options:

VNC must be explicitly disabled to get access to the SPICE console. Set the enabled option to False in the [vnc] section to disable the VNC console.

agent_enabled¶

Type: boolean
Default: True

Enable the SPICE guest agent support on the instances.

The Spice agent works with the Spice protocol to offer a better guest console experience. However, the Spice console can still be used without the Spice Agent. With the Spice agent installed the following features are enabled:

Copy & Paste of text and images between the guest and client machine
Automatic adjustment of resolution when the client screen changes - e.g. if you make the Spice console full screen the guest resolution will adjust to match it rather than letterboxing.
Better mouse integration - The mouse can be captured and released without needing to click inside the console or press keys to release it. The performance of mouse movement is also improved.

html5proxy_base_url¶

Type: URI
Default: http://127.0.0.1:6082/spice_auto.html

Location of the SPICE HTML5 console proxy.

End user would use this URL to connect to the nova-spicehtml5proxy` service. This service will forward request to the console of an instance.

In order to use SPICE console, the service nova-spicehtml5proxy should be running. This service is typically launched on the controller node.

Possible values:

Must be a valid URL of the form: http://host:port/spice_auto.html where host is the node running nova-spicehtml5proxy and the port is typically 6082. Consider not using default value as it is not well defined for any real deployment.

Related options:

This option depends on html5proxy_host and html5proxy_port options. The access URL returned by the compute node must have the host and port where the nova-spicehtml5proxy service is listening.

server_listen¶

Type: string
Default: 127.0.0.1

The address where the SPICE server running on the instances should listen.

Typically, the nova-spicehtml5proxy proxy client runs on the controller node and connects over the private network to this address on the compute node(s).

Possible values:

IP address to listen on.

server_proxyclient_address¶

Type: string
Default: 127.0.0.1

The address used by nova-spicehtml5proxy client to connect to instance console.

Typically, the nova-spicehtml5proxy proxy client runs on the controller node and connects over the private network to this address on the compute node(s).

Possible values:

Any valid IP address on the compute node.

Related options:

This option depends on the server_listen option. The proxy client must be able to access the address specified in server_listen using the value of this option.

html5proxy_host¶

Type: host address
Default: 0.0.0.0

IP address or a hostname on which the nova-spicehtml5proxy service listens for incoming requests.

Related options:

This option depends on the html5proxy_base_url option. The nova-spicehtml5proxy service must be listening on a host that is accessible from the HTML5 client.

html5proxy_port¶

Type: port number
Default: 6082
Minimum Value: 0
Maximum Value: 65535

Port on which the nova-spicehtml5proxy service listens for incoming requests.

Related options:

This option depends on the html5proxy_base_url option. The nova-spicehtml5proxy service must be listening on a port that is accessible from the HTML5 client.

upgrade_levels¶

upgrade_levels options are used to set version cap for RPC messages sent between different nova services.

By default all services send messages using the latest version they know about.

The compute upgrade level is an important part of rolling upgrades where old and new nova-compute services run side by side.

The other options can largely be ignored, and are only kept to help with a possible future backport issue.

compute¶

Type: string
Default: <None>

Compute RPC API version cap.

By default, we always send messages using the most recent version the client knows about.

Where you have old and new compute services running, you should set this to the lowest deployed version. This is to guarantee that all services never send messages that one of the compute nodes can’t understand. Note that we only support upgrading from release N to release N+1.

Set this option to “auto” if you want to let the compute RPC module automatically determine what version to use based on the service versions in the deployment.

Possible values:

By default send the latest version the client knows about
‘auto’: Automatically determines what version to use based on the service versions in the deployment.
A string representing a version number in the format ‘N.N’; for example, possible values might be ‘1.12’ or ‘2.0’.
An OpenStack release name, in lower case, such as ‘mitaka’ or ‘liberty’.

cert¶

Type: string
Default: <None>

Cert RPC API version cap.

Possible values:

By default send the latest version the client knows about
A string representing a version number in the format ‘N.N’; for example, possible values might be ‘1.12’ or ‘2.0’.
An OpenStack release name, in lower case, such as ‘mitaka’ or ‘liberty’.

Warning

This option is deprecated for removal since 18.0.0. Its value may be silently ignored in the future.

Reason: The nova-cert service was removed in 16.0.0 (Pike) so this option is no longer used.

scheduler¶

Type: string
Default: <None>

Scheduler RPC API version cap.

Possible values:

By default send the latest version the client knows about
A string representing a version number in the format ‘N.N’; for example, possible values might be ‘1.12’ or ‘2.0’.
An OpenStack release name, in lower case, such as ‘mitaka’ or ‘liberty’.

conductor¶

Type: string
Default: <None>

Conductor RPC API version cap.

Possible values:

By default send the latest version the client knows about
A string representing a version number in the format ‘N.N’; for example, possible values might be ‘1.12’ or ‘2.0’.
An OpenStack release name, in lower case, such as ‘mitaka’ or ‘liberty’.

baseapi¶

Type: string
Default: <None>

Base API RPC API version cap.

Possible values:

By default send the latest version the client knows about
A string representing a version number in the format ‘N.N’; for example, possible values might be ‘1.12’ or ‘2.0’.
An OpenStack release name, in lower case, such as ‘mitaka’ or ‘liberty’.

vault¶

root_token_id¶

Type: string
Default: <None>

root token for vault

approle_role_id¶

Type: string
Default: <None>

AppRole role_id for authentication with vault

approle_secret_id¶

Type: string
Default: <None>

AppRole secret_id for authentication with vault

kv_mountpoint¶

Type: string
Default: secret

Mountpoint of KV store in Vault to use, for example: secret

kv_version¶

Type: integer
Default: 2

Version of KV store in Vault to use, for example: 2

vault_url¶

Type: string
Default: http://127.0.0.1:8200

Use this endpoint to connect to Vault, for example: “http://127.0.0.1:8200”

ssl_ca_crt_file¶

Type: string
Default: <None>

Absolute path to ca cert file

use_ssl¶

Type: boolean
Default: False

SSL Enabled/Disabled

vendordata_dynamic_auth¶

Options within this group control the authentication of the vendordata subsystem of the metadata API server (and config drive) with external systems.

cafile¶

Type: string
Default: <None>

PEM encoded Certificate Authority to use when verifying HTTPs connections.

certfile¶

Type: string
Default: <None>

PEM encoded client certificate cert file

keyfile¶

Type: string
Default: <None>

PEM encoded client certificate key file

insecure¶

Type: boolean
Default: False

Verify HTTPS connections.

timeout¶

Type: integer
Default: <None>

Timeout value for http requests

collect_timing¶

Type: boolean
Default: False

Collect per-API call timing information.

split_loggers¶

Type: boolean
Default: False

Log requests to multiple loggers.

auth_type¶

Type: unknown type
Default: <None>

Authentication type to load

Deprecated Variations¶
Group	Name
vendordata_dynamic_auth	auth_plugin

auth_section¶

Type: unknown type
Default: <None>

Config Section from which to load plugin specific options

auth_url¶

Type: unknown type
Default: <None>

Authentication URL

system_scope¶

Type: unknown type
Default: <None>

Scope for system operations

domain_id¶

Type: unknown type
Default: <None>

Domain ID to scope to

domain_name¶

Type: unknown type
Default: <None>

Domain name to scope to

project_id¶

Type: unknown type
Default: <None>

Project ID to scope to

project_name¶

Type: unknown type
Default: <None>

Project name to scope to

project_domain_id¶

Type: unknown type
Default: <None>

Domain ID containing project

project_domain_name¶

Type: unknown type
Default: <None>

Domain name containing project

trust_id¶

Type: unknown type
Default: <None>

Trust ID

default_domain_id¶

Type: unknown type
Default: <None>

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name¶

Type: unknown type
Default: <None>

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

user_id¶

Type: unknown type
Default: <None>

User ID

username¶

Type: unknown type
Default: <None>

Username

Deprecated Variations¶
Group	Name
vendordata_dynamic_auth	user-name
vendordata_dynamic_auth	user_name

user_domain_id¶

Type: unknown type
Default: <None>

User’s domain id

user_domain_name¶

Type: unknown type
Default: <None>

User’s domain name

password¶

Type: unknown type
Default: <None>

User’s password

tenant_id¶

Type: unknown type
Default: <None>

Tenant ID

tenant_name¶

Type: unknown type
Default: <None>

Tenant Name

vmware¶

Related options: Following options must be set in order to launch VMware-based virtual machines.

compute_driver: Must use vmwareapi.VMwareVCDriver.
vmware.host_username
vmware.host_password
vmware.cluster_name

integration_bridge¶

Type: string
Default: <None>

This option should be configured only when using the NSX-MH Neutron plugin. This is the name of the integration bridge on the ESXi server or host. This should not be set for any other Neutron plugin. Hence the default value is not set.

Possible values:

Any valid string representing the name of the integration bridge

console_delay_seconds¶

Type: integer
Default: <None>
Minimum Value: 0

Set this value if affected by an increased network latency causing repeated characters when typing in a remote console.

serial_port_service_uri¶

Type: string
Default: <None>

Identifies the remote system where the serial port traffic will be sent.

This option adds a virtual serial port which sends console output to a configurable service URI. At the service URI address there will be virtual serial port concentrator that will collect console logs. If this is not set, no serial ports will be added to the created VMs.

Possible values:

Any valid URI

serial_port_proxy_uri¶

Type: URI
Default: <None>

Identifies a proxy service that provides network access to the serial_port_service_uri.

Possible values:

Any valid URI (The scheme is ‘telnet’ or ‘telnets’.)

Related options: This option is ignored if serial_port_service_uri is not specified. * serial_port_service_uri

serial_log_dir¶

Type: string
Default: /opt/vmware/vspc

Specifies the directory where the Virtual Serial Port Concentrator is storing console log files. It should match the ‘serial_log_dir’ config value of VSPC.

host_ip¶

Type: host address
Default: <None>

Hostname or IP address for connection to VMware vCenter host.

host_port¶

Type: port number
Default: 443
Minimum Value: 0
Maximum Value: 65535

Port for connection to VMware vCenter host.

host_username¶

Type: string
Default: <None>

Username for connection to VMware vCenter host.

host_password¶

Type: string
Default: <None>

Password for connection to VMware vCenter host.

ca_file¶

Type: string
Default: <None>

Specifies the CA bundle file to be used in verifying the vCenter server certificate.

insecure¶

Type: boolean
Default: False

If true, the vCenter server certificate is not verified. If false, then the default CA truststore is used for verification.

Related options: * ca_file: This option is ignored if “ca_file” is set.

cluster_name¶

Type: string
Default: <None>

Name of a VMware Cluster ComputeResource.

datastore_regex¶

Type: string
Default: <None>

Regular expression pattern to match the name of datastore.

The datastore_regex setting specifies the datastores to use with Compute. For example, datastore_regex=”nas.*” selects all the data stores that have a name starting with “nas”.

NOTE: If no regex is given, it just picks the datastore with the most freespace.

Possible values:

Any matching regular expression to a datastore must be given

task_poll_interval¶

Type: floating point
Default: 0.5

Time interval in seconds to poll remote tasks invoked on VMware VC server.

api_retry_count¶

Type: integer
Default: 10
Minimum Value: 0

Number of times VMware vCenter server API must be retried on connection failures, e.g. socket error, etc.

vnc_port¶

Type: port number
Default: 5900
Minimum Value: 0
Maximum Value: 65535

This option specifies VNC starting port.

Every VM created by ESX host has an option of enabling VNC client for remote connection. Above option ‘vnc_port’ helps you to set default starting port for the VNC client.

Possible values:

Any valid port number within 5900 -(5900 + vnc_port_total)

Related options: Below options should be set to enable VNC client. * vnc.enabled = True * vnc_port_total

vnc_port_total¶

Type: integer
Default: 10000
Minimum Value: 0

Total number of VNC ports.

vnc_keymap¶

Type: string
Default: en-us

Keymap for VNC.

The keyboard mapping (keymap) determines which keyboard layout a VNC session should use by default.

Possible values:

A keyboard layout which is supported by the underlying hypervisor on this node. This is usually an ‘IETF language tag’ (for example ‘en-us’).

use_linked_clone¶

Type: boolean
Default: True

This option enables/disables the use of linked clone.

The ESX hypervisor requires a copy of the VMDK file in order to boot up a virtual machine. The compute driver must download the VMDK via HTTP from the OpenStack Image service to a datastore that is visible to the hypervisor and cache it. Subsequent virtual machines that need the VMDK use the cached version and don’t have to copy the file again from the OpenStack Image service.

If set to false, even with a cached VMDK, there is still a copy operation from the cache location to the hypervisor file directory in the shared datastore. If set to true, the above copy operation is avoided as it creates copy of the virtual machine that shares virtual disks with its parent VM.

connection_pool_size¶

Type: integer
Default: 10
Minimum Value: 10

This option sets the http connection pool size

The connection pool size is the maximum number of connections from nova to vSphere. It should only be increased if there are warnings indicating that the connection pool is full, otherwise, the default should suffice.

pbm_enabled¶

Type: boolean
Default: False

This option enables or disables storage policy based placement of instances.

Related options:

pbm_default_policy

pbm_wsdl_location¶

Type: string
Default: <None>

This option specifies the PBM service WSDL file location URL.

Setting this will disable storage policy based placement of instances.

Possible values:

Any valid file path e.g file:///opt/SDK/spbm/wsdl/pbmService.wsdl

pbm_default_policy¶

Type: string
Default: <None>

This option specifies the default policy to be used.

If pbm_enabled is set and there is no defined storage policy for the specific request, then this policy will be used.

Possible values:

Any valid storage policy such as VSAN default storage policy

Related options:

pbm_enabled

maximum_objects¶

Type: integer
Default: 100
Minimum Value: 0

This option specifies the limit on the maximum number of objects to return in a single result.

A positive value will cause the operation to suspend the retrieval when the count of objects reaches the specified limit. The server may still limit the count to something less than the configured value. Any remaining objects may be retrieved with additional requests.

cache_prefix¶

Type: string
Default: <None>

This option adds a prefix to the folder where cached images are stored

This is not the full path - just a folder prefix. This should only be used when a datastore cache is shared between compute nodes.

Note: This should only be used when the compute nodes are running on same host or they have a shared file system.

Possible values:

Any string representing the cache prefix to the folder

vnc¶

Virtual Network Computer (VNC) can be used to provide remote desktop console access to instances for tenants and/or administrators.

enabled¶

Type: boolean
Default: True

Enable VNC related features.

Guests will get created with graphical devices to support this. Clients (for example Horizon) can then establish a VNC connection to the guest.

Deprecated Variations¶
Group	Name
DEFAULT	vnc_enabled

server_listen¶

Type: host address
Default: 127.0.0.1

The IP address or hostname on which an instance should listen to for incoming VNC connection requests on this node.

Deprecated Variations¶
Group	Name
DEFAULT	vncserver_listen
vnc	vncserver_listen

server_proxyclient_address¶

Type: host address
Default: 127.0.0.1

Private, internal IP address or hostname of VNC console proxy.

The VNC proxy is an OpenStack component that enables compute service users to access their instances through VNC clients.

This option sets the private address to which proxy clients, such as nova-novncproxy, should connect to.

Deprecated Variations¶
Group	Name
DEFAULT	vncserver_proxyclient_address
vnc	vncserver_proxyclient_address

novncproxy_base_url¶

Type: URI
Default: http://127.0.0.1:6080/vnc_auto.html

Public address of noVNC VNC console proxy.

The VNC proxy is an OpenStack component that enables compute service users to access their instances through VNC clients. noVNC provides VNC support through a websocket-based client.

This option sets the public base URL to which client systems will connect. noVNC clients can use this address to connect to the noVNC instance and, by extension, the VNC sessions.

If using noVNC >= 1.0.0, you should use vnc_lite.html instead of vnc_auto.html.

Related options:

novncproxy_host
novncproxy_port

Deprecated Variations¶
Group	Name
DEFAULT	novncproxy_base_url

novncproxy_host¶

Type: string
Default: 0.0.0.0

IP address that the noVNC console proxy should bind to.

The VNC proxy is an OpenStack component that enables compute service users to access their instances through VNC clients. noVNC provides VNC support through a websocket-based client.

This option sets the private address to which the noVNC console proxy service should bind to.

Related options:

novncproxy_port
novncproxy_base_url

Deprecated Variations¶
Group	Name
DEFAULT	novncproxy_host

novncproxy_port¶

Type: port number
Default: 6080
Minimum Value: 0
Maximum Value: 65535

Port that the noVNC console proxy should bind to.

The VNC proxy is an OpenStack component that enables compute service users to access their instances through VNC clients. noVNC provides VNC support through a websocket-based client.

This option sets the private port to which the noVNC console proxy service should bind to.

Related options:

novncproxy_host
novncproxy_base_url

Deprecated Variations¶
Group	Name
DEFAULT	novncproxy_port

auth_schemes¶

Type: list
Default: ['none']

The authentication schemes to use with the compute node.

Control what RFB authentication schemes are permitted for connections between the proxy and the compute host. If multiple schemes are enabled, the first matching scheme will be used, thus the strongest schemes should be listed first.

Related options:

[vnc]vencrypt_client_key, [vnc]vencrypt_client_cert: must also be set

vencrypt_client_key¶

Type: string
Default: <None>

The path to the client certificate PEM file (for x509)

The fully qualified path to a PEM file containing the private key which the VNC proxy server presents to the compute node during VNC authentication.

Related options:

vnc.auth_schemes: must include vencrypt
vnc.vencrypt_client_cert: must also be set

vencrypt_client_cert¶

Type: string
Default: <None>

The path to the client key file (for x509)

The fully qualified path to a PEM file containing the x509 certificate which the VNC proxy server presents to the compute node during VNC authentication.

Realted options:

vnc.auth_schemes: must include vencrypt
vnc.vencrypt_client_key: must also be set

vencrypt_ca_certs¶

Type: string
Default: <None>

The path to the CA certificate PEM file

The fully qualified path to a PEM file containing one or more x509 certificates for the certificate authorities used by the compute node VNC server.

Related options:

vnc.auth_schemes: must include vencrypt

workarounds¶

A collection of workarounds used to mitigate bugs or issues found in system tools (e.g. Libvirt or QEMU) or Nova itself under certain conditions. These should only be enabled in exceptional circumstances. All options are linked against bug IDs, where more information on the issue can be found.

disable_rootwrap¶

Type: boolean
Default: False

Use sudo instead of rootwrap.

Allow fallback to sudo for performance reasons.

For more information, refer to the bug report:

https://bugs.launchpad.net/nova/+bug/1415106

Possible values:

True: Use sudo instead of rootwrap
False: Use rootwrap as usual

Interdependencies to other options:

Any options that affect ‘rootwrap’ will be ignored.

disable_libvirt_livesnapshot¶

Type: boolean
Default: False

Disable live snapshots when using the libvirt driver.

Live snapshots allow the snapshot of the disk to happen without an interruption to the guest, using coordination with a guest agent to quiesce the filesystem.

When using libvirt 1.2.2 live snapshots fail intermittently under load (likely related to concurrent libvirt/qemu operations). This config option provides a mechanism to disable live snapshot, in favor of cold snapshot, while this is resolved. Cold snapshot causes an instance outage while the guest is going through the snapshotting process.

For more information, refer to the bug report:

https://bugs.launchpad.net/nova/+bug/1334398

Possible values:

True: Live snapshot is disabled when using libvirt
False: Live snapshots are always used when snapshotting (as long as there is a new enough libvirt and the backend storage supports it)

Warning

This option is deprecated for removal since 19.0.0. Its value may be silently ignored in the future.

Reason: This option was added to work around issues with libvirt 1.2.2. We no longer support this version of libvirt, which means this workaround is no longer necessary. It will be removed in a future release.

handle_virt_lifecycle_events¶

Type: boolean
Default: True

Enable handling of events emitted from compute drivers.

Many compute drivers emit lifecycle events, which are events that occur when, for example, an instance is starting or stopping. If the instance is going through task state changes due to an API operation, like resize, the events are ignored.

This is an advanced feature which allows the hypervisor to signal to the compute service that an unexpected state change has occurred in an instance and that the instance can be shutdown automatically. Unfortunately, this can race in some conditions, for example in reboot operations or when the compute service or when host is rebooted (planned or due to an outage). If such races are common, then it is advisable to disable this feature.

Care should be taken when this feature is disabled and ‘sync_power_state_interval’ is set to a negative value. In this case, any instances that get out of sync between the hypervisor and the Nova database will have to be synchronized manually.

For more information, refer to the bug report: https://bugs.launchpad.net/bugs/1444630

Interdependencies to other options:

If sync_power_state_interval is negative and this feature is disabled, then instances that get out of sync between the hypervisor and the Nova database will have to be synchronized manually.

disable_group_policy_check_upcall¶

Type: boolean
Default: False

Disable the server group policy check upcall in compute.

In order to detect races with server group affinity policy, the compute service attempts to validate that the policy was not violated by the scheduler. It does this by making an upcall to the API database to list the instances in the server group for one that it is booting, which violates our api/cell isolation goals. Eventually this will be solved by proper affinity guarantees in the scheduler and placement service, but until then, this late check is needed to ensure proper affinity policy.

Operators that desire api/cell isolation over this check should enable this flag, which will avoid making that upcall from compute.

Related options:

[filter_scheduler]/track_instance_changes also relies on upcalls from the compute service to the scheduler service.

enable_numa_live_migration¶

Type: boolean
Default: False

Enable live migration of instances with NUMA topologies.

Live migration of instances with NUMA topologies when using the libvirt driver is only supported in deployments that have been fully upgraded to Train. In previous versions, or in mixed Stein/Train deployments with a rolling upgrade in progress, live migration of instances with NUMA topologies is disabled by default when using the libvirt driver. This includes live migration of instances with CPU pinning or hugepages. CPU pinning and huge page information for such instances is not currently re-calculated, as noted in bug #1289064. This means that if instances were already present on the destination host, the migrated instance could be placed on the same dedicated cores as these instances or use hugepages allocated for another instance. Alternately, if the host platforms were not homogeneous, the instance could be assigned to non-existent cores or be inadvertently split across host NUMA nodes.

Despite these known issues, there may be cases where live migration is necessary. By enabling this option, operators that are aware of the issues and are willing to manually work around them can enable live migration support for these instances.

Related options:

compute_driver: Only the libvirt driver is affected.

Warning

This option is deprecated for removal since 20.0.0. Its value may be silently ignored in the future.

Reason: This option was added to mitigate known issues when live migrating instances with a NUMA topology with the libvirt driver. Those issues are resolved in Train. Clouds using the libvirt driver and fully upgraded to Train support NUMA-aware live migration. This option will be removed in a future release.

ensure_libvirt_rbd_instance_dir_cleanup¶

Type: boolean
Default: False

Ensure the instance directory is removed during clean up when using rbd.

When enabled this workaround will ensure that the instance directory is always removed during cleanup on hosts using [libvirt]/images_type=rbd. This avoids the following bugs with evacuation and revert resize clean up that lead to the instance directory remaining on the host:

https://bugs.launchpad.net/nova/+bug/1414895

https://bugs.launchpad.net/nova/+bug/1761062

Both of these bugs can then result in DestinationDiskExists errors being raised if the instances ever attempt to return to the host.

Warning

Operators will need to ensure that the instance directory itself, specified by [DEFAULT]/instances_path, is not shared between computes before enabling this workaround otherwise the console.log, kernels, ramdisks and any additional files being used by the running instance will be lost.

Related options:

compute_driver (libvirt)
[libvirt]/images_type (rbd)
instances_path

disable_fallback_pcpu_query¶

Type: boolean
Default: False

Disable fallback request for VCPU allocations when using pinned instances.

Starting in Train, compute nodes using the libvirt virt driver can report PCPU inventory and will use this for pinned instances. The scheduler will automatically translate requests using the legacy CPU pinning-related flavor extra specs, hw:cpu_policy and hw:cpu_thread_policy, their image metadata property equivalents, and the emulator threads pinning flavor extra spec, hw:emulator_threads_policy, to new placement requests. However, compute nodes require additional configuration in order to report PCPU inventory and this configuration may not be present immediately after an upgrade. To ensure pinned instances can be created without this additional configuration, the scheduler will make a second request to placement for old-style VCPU-based allocations and fallback to these allocation candidates if necessary. This has a slight performance impact and is not necessary on new or upgraded deployments where the new configuration has been set on all hosts. By setting this option, the second lookup is disabled and the scheduler will only request PCPU-based allocations.

Warning

This option is deprecated for removal since 20.0.0. Its value may be silently ignored in the future.

never_download_image_if_on_rbd¶

Type: boolean
Default: False

When booting from an image on a ceph-backed compute node, if the image does not already reside on the ceph cluster (as would be the case if glance is also using the same cluster), nova will download the image from glance and upload it to ceph itself. If using multiple ceph clusters, this may cause nova to unintentionally duplicate the image in a non-COW-able way in the local ceph deployment, wasting space.

For more information, refer to the bug report:

https://bugs.launchpad.net/nova/+bug/1858877

Enabling this option will cause nova to refuse to boot an instance if it would require downloading the image from glance and uploading it to ceph itself.

Related options:

compute_driver (libvirt)
[libvirt]/images_type (rbd)

disable_native_luksv1¶

Type: boolean
Default: False

When attaching encrypted LUKSv1 Cinder volumes to instances the Libvirt driver configures the encrypted disks to be natively decrypted by QEMU.

A performance issue has been discovered in the libgcrypt library used by QEMU that serverly limits the I/O performance in this scenario.

For more information please refer to the following bug report:

RFE: hardware accelerated AES-XTS mode https://bugzilla.redhat.com/show_bug.cgi?id=1762765

Enabling this workaround option will cause Nova to use the legacy dm-crypt based os-brick encryptor to decrypt the LUKSv1 volume.

Note that enabling this option while using volumes that do not provide a host block device such as Ceph will result in a failure to boot from or attach the volume to an instance. See the [workarounds]/rbd_block_device option for a way to avoid this for RBD.

Related options:

compute_driver (libvirt)
rbd_block_device (workarounds)

Warning

This option is deprecated for removal since 23.0.0. Its value may be silently ignored in the future.

Reason: The underlying performance regression within libgcrypt that prompted this workaround has been resolved as of 1.8.5

rbd_volume_local_attach¶

Type: boolean
Default: False

Attach RBD Cinder volumes to the compute as host block devices.

When enabled this option instructs os-brick to connect RBD volumes locally on the compute host as block devices instead of natively through QEMU.

This workaround does not currently support extending attached volumes.

This can be used with the disable_native_luksv1 workaround configuration option to avoid the recently discovered performance issues found within the libgcrypt library.

This workaround is temporary and will be removed during the W release once all impacted distributions have been able to update their versions of the libgcrypt library.

Related options:

compute_driver (libvirt)
disable_qemu_native_luksv1 (workarounds)

Warning

This option is deprecated for removal since 23.0.0. Its value may be silently ignored in the future.

Reason: The underlying performance regression within libgcrypt that prompted this workaround has been resolved as of 1.8.5

reserve_disk_resource_for_image_cache¶

Type: boolean
Default: False

If it is set to True then the libvirt driver will reserve DISK_GB resource for the images stored in the image cache. If the DEFAULT.instances_path is on different disk partition than the image cache directory then the driver will not reserve resource for the cache.

Such disk reservation is done by a periodic task in the resource tracker that runs every update_resources_interval seconds. So the reservation is not updated immediately when an image is cached.

Related options:

DEFAULT.instances_path
image_cache.subdirectory_name
update_resources_interval

libvirt_disable_apic¶

Type: boolean
Default: False

With some kernels initializing the guest apic can result in a kernel hang that renders the guest unusable. This happens as a result of a kernel bug. In most cases the correct fix it to update the guest image kernel to one that is patched however in some cases this is not possible. This workaround allows the emulation of an apic to be disabled per host however it is not recommended to use outside of a CI or developer cloud.

wait_for_vif_plugged_event_during_hard_reboot¶

Type: list
Default: []

The libvirt virt driver implements power on and hard reboot by tearing down every vif of the instance being rebooted then plug them again. By default nova does not wait for network-vif-plugged event from neutron before it lets the instance run. This can cause the instance to requests the IP via DHCP before the neutron backend has a chance to set up the networking backend after the vif plug.

This flag defines which vifs nova expects network-vif-plugged events from during hard reboot. The possible values are neutron port vnic types:

normal
direct
macvtap
baremetal
direct-physical
virtio-forwarder
smart-nic
vdpa
accelerator-direct
accelerator-direct-physical

Adding a vnic_type to this configuration makes Nova wait for a network-vif-plugged event for each of the instance’s vifs having the specific vnic_type before unpausing the instance, similarly to how new instance creation works.

Please note that not all neutron networking backends send plug time events, for certain vnic_type therefore this config is empty by default.

The ml2/ovs and the networking-odl backends are known to send plug time events for ports with normal vnic_type so it is safe to add normal to this config if you are using only those backends in the compute host.

The neutron in-tree SRIOV backend does not reliably send network-vif-plugged event during plug time for ports with direct vnic_type and never sends that event for port with direct-physical vnic_type during plug time. For other vnic_type and backend pairs, please consult the developers of the backend.

Related options:

DEFAULT.vif_plugging_timeout

enable_qemu_monitor_announce_self¶

Type: boolean
Default: False

If it is set to True the libvirt driver will try as a best effort to send the announce-self command to the QEMU monitor so that it generates RARP frames to update network switches in the post live migration phase on the destination.

Please note that this causes the domain to be considered tainted by libvirt.

Related options:

DEFAULT.compute_driver (libvirt)

disable_compute_service_check_for_ffu¶

Type: boolean
Default: False

If this is set, the normal safety check for old compute services will be treated as a warning instead of an error. This is only to be enabled to facilitate a Fast-Forward upgrade where new control services are being started before compute nodes have been able to update their service record. In an FFU, the service records in the database will be more than one version old until the compute nodes start up, but control services need to be online first.

wsgi¶

Options under this group are used to configure WSGI (Web Server Gateway Interface). WSGI is used to serve API requests.

api_paste_config¶

Type: string
Default: api-paste.ini

This option represents a file name for the paste.deploy config for nova-api.

Possible values:

A string representing file name for the paste.deploy config.

Deprecated Variations¶
Group	Name
DEFAULT	api_paste_config

wsgi_log_format¶

Type: string
Default: %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f

It represents a python format string that is used as the template to generate log lines. The following values can be formatted into it: client_ip, date_time, request_line, status_code, body_length, wall_seconds.

This option is used for building custom request loglines when running nova-api under eventlet. If used under uwsgi or apache, this option has no effect.

Possible values:

‘%(client_ip)s “%(request_line)s” status: %(status_code)s ‘ ‘len: %(body_length)s time: %(wall_seconds).7f’ (default)
Any formatted string formed by specific values.

Deprecated Variations¶
Group	Name
DEFAULT	wsgi_log_format

Warning

This option is deprecated for removal since 16.0.0. Its value may be silently ignored in the future.

Reason: This option only works when running nova-api under eventlet, and encodes very eventlet specific pieces of information. Starting in Pike the preferred model for running nova-api is under uwsgi or apache mod_wsgi.

secure_proxy_ssl_header¶

Type: string
Default: <None>

This option specifies the HTTP header used to determine the protocol scheme for the original request, even if it was removed by a SSL terminating proxy.

Possible values:

None (default) - the request scheme is not influenced by any HTTP headers
Valid HTTP header, like HTTP_X_FORWARDED_PROTO

WARNING: Do not set this unless you know what you are doing.

Make sure ALL of the following are true before setting this (assuming the values from the example above):

Your API is behind a proxy.
Your proxy strips the X-Forwarded-Proto header from all incoming requests. In other words, if end users include that header in their requests, the proxy will discard it.
Your proxy sets the X-Forwarded-Proto header and sends it to API, but only for requests that originally come in via HTTPS.

If any of those are not true, you should keep this setting set to None.

Deprecated Variations¶
Group	Name
DEFAULT	secure_proxy_ssl_header

ssl_ca_file¶

Type: string
Default: <None>

This option allows setting path to the CA certificate file that should be used to verify connecting clients.

Possible values:

String representing path to the CA certificate file.

Related options:

enabled_ssl_apis

Deprecated Variations¶
Group	Name
DEFAULT	ssl_ca_file

ssl_cert_file¶

Type: string
Default: <None>

This option allows setting path to the SSL certificate of API server.

Possible values:

String representing path to the SSL certificate.

Related options:

enabled_ssl_apis

Deprecated Variations¶
Group	Name
DEFAULT	ssl_cert_file

ssl_key_file¶

Type: string
Default: <None>

This option specifies the path to the file where SSL private key of API server is stored when SSL is in effect.

Possible values:

String representing path to the SSL private key.

Related options:

enabled_ssl_apis

Deprecated Variations¶
Group	Name
DEFAULT	ssl_key_file

tcp_keepidle¶

Type: integer
Default: 600
Minimum Value: 0

This option sets the value of TCP_KEEPIDLE in seconds for each server socket. It specifies the duration of time to keep connection active. TCP generates a KEEPALIVE transmission for an application that requests to keep connection active. Not supported on OS X.

Related options:

keep_alive

Deprecated Variations¶
Group	Name
DEFAULT	tcp_keepidle

default_pool_size¶

Type: integer
Default: 1000
Minimum Value: 0

This option specifies the size of the pool of greenthreads used by wsgi. It is possible to limit the number of concurrent connections using this option.

Deprecated Variations¶
Group	Name
DEFAULT	wsgi_default_pool_size

max_header_line¶

Type: integer
Default: 16384
Minimum Value: 0

This option specifies the maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those generated by the Keystone v3 API with big service catalogs).

Since TCP is a stream based protocol, in order to reuse a connection, the HTTP has to have a way to indicate the end of the previous response and beginning of the next. Hence, in a keep_alive case, all messages must have a self-defined message length.

Deprecated Variations¶
Group	Name
DEFAULT	max_header_line

keep_alive¶

Type: boolean
Default: True

This option allows using the same TCP connection to send and receive multiple HTTP requests/responses, as opposed to opening a new one for every single request/response pair. HTTP keep-alive indicates HTTP connection reuse.

Possible values:

True : reuse HTTP connection.
False : closes the client socket connection explicitly.

Related options:

tcp_keepidle

Deprecated Variations¶
Group	Name
DEFAULT	wsgi_keep_alive

client_socket_timeout¶

Type: integer
Default: 900
Minimum Value: 0

This option specifies the timeout for client connections’ socket operations. If an incoming connection is idle for this number of seconds it will be closed. It indicates timeout on individual read/writes on the socket connection. To wait forever set to 0.

Deprecated Variations¶
Group	Name
DEFAULT	client_socket_timeout

zvm¶

zvm options allows cloud administrator to configure related z/VM hypervisor driver to be used within an OpenStack deployment.

zVM options are used when the compute_driver is set to use zVM (compute_driver=zvm.ZVMDriver)

cloud_connector_url¶

Type: URI
Default: http://zvm.example.org:8080/

This option has a sample default set, which means that its actual default value may vary from the one documented above.

URL to be used to communicate with z/VM Cloud Connector.

ca_file¶

Type: string
Default: <None>

CA certificate file to be verified in httpd server with TLS enabled

A string, it must be a path to a CA bundle to use.

image_tmp_path¶

Type: string
Default: $state_path/images

This option has a sample default set, which means that its actual default value may vary from the one documented above.

The path at which images will be stored (snapshot, deploy, etc).

Images used for deploy and images captured via snapshot need to be stored on the local disk of the compute host. This configuration identifies the directory location.

Possible values:: A file system path on the host running the compute service.

reachable_timeout¶

Type: integer
Default: 300

Timeout (seconds) to wait for an instance to start.

The z/VM driver relies on communication between the instance and cloud connector. After an instance is created, it must have enough time to wait for all the network info to be written into the user directory. The driver will keep rechecking network status to the instance with the timeout value, If setting network failed, it will notify the user that starting the instance failed and put the instance in ERROR state. The underlying z/VM guest will then be deleted.

Possible Values:: Any positive integer. Recommended to be at least 300 seconds (5 minutes), but it will vary depending on instance and system load. A value of 0 is used for debug. In this case the underlying z/VM guest will not be deleted when the instance is marked in ERROR state.

Configuration Options

Configuration Options¶

DEFAULT¶

api¶

api_database¶

barbican¶

cache¶

cinder¶

compute¶

conductor¶

console¶

consoleauth¶

cors¶

cyborg¶

database¶

devices¶

ephemeral_storage_encryption¶

filter_scheduler¶

glance¶

guestfs¶

healthcheck¶

hyperv¶

image_cache¶

ironic¶

key_manager¶

keystone¶

keystone_authtoken¶

libvirt¶

metrics¶

mks¶

neutron¶

notifications¶

oslo_concurrency¶

oslo_messaging_amqp¶

oslo_messaging_kafka¶

oslo_messaging_notifications¶

oslo_messaging_rabbit¶

oslo_middleware¶

oslo_policy¶

pci¶

placement¶

powervm¶

privsep¶

profiler¶

quota¶

rdp¶

remote_debug¶

scheduler¶

serial_console¶

service_user¶

spice¶

upgrade_levels¶

vault¶

vendordata_dynamic_auth¶

vmware¶

vnc¶

workarounds¶

wsgi¶

zvm¶

nova 23.2.3.dev51

Page Contents