Basic Load Balancing Cookbook Using Neutron Client (deprecated)¶

Deploy a basic HTTP load balancer¶

While this is technically the simplest complete load balancing solution that can be deployed, we recommend deploying HTTP load balancers with a health monitor to ensure back-end member availability. See Deploy a basic HTTP load balancer with a health monitor below.

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with an HTTP application on TCP port 80.
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• We want to configure a basic load balancer that is accessible from the internet, which distributes web requests to the back-end servers.

Solution:

1. Create load balancer lb1 on subnet public-subnet.
2. Create listener listener1.
3. Create pool pool1 as listener1’s default pool.
4. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.

CLI commands:

neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --name listener1 --loadbalancer lb1 --protocol HTTP --protocol-port 80
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1

Deploy a basic HTTP load balancer with a health monitor¶

This is the simplest recommended load balancing solution for HTTP applications. This solution is appropriate for operators with provider networks that are not compatible with Neutron floating-ip functionality (such as IPv6 networks). However, if you need to retain control of the external IP through which a load balancer is accessible, even if the load balancer needs to be destroyed or recreated, it may be more appropriate to deploy your basic load balancer using a floating IP. See Deploy a basic HTTP load balancer using a floating IP below.

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with an HTTP application on TCP port 80.
• These back-end servers have been configured with a health check at the URL path “/healthcheck”. See HTTP health monitors below.
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• We want to configure a basic load balancer that is accessible from the internet, which distributes web requests to the back-end servers, and which checks the “/healthcheck” path to ensure back-end member health.

Solution:

1. Create load balancer lb1 on subnet public-subnet.
2. Create listener listener1.
3. Create pool pool1 as listener1’s default pool.
4. Create a health monitor on pool1 which tests the “/healthcheck” path.
5. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.

CLI commands:

neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --name listener1 --loadbalancer lb1 --protocol HTTP --protocol-port 80
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP
neutron lbaas-healthmonitor-create --delay 5 --max-retries 4 --timeout 10 --type HTTP --url_path /healthcheck --pool pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1

Deploy a basic HTTP load balancer using a floating IP¶

It can be beneficial to use a floating IP when setting up a load balancer’s VIP in order to ensure you retain control of the IP that gets assigned as the floating IP in case the load balancer needs to be destroyed, moved, or recreated.

Note that this is not possible to do with IPv6 load balancers as floating IPs do not work with IPv6. Further, there is currently a bug in Neutron Distributed Virtual Routing (DVR) which prevents floating IPs from working correctly when DVR is in use. See: https://bugs.launchpad.net/neutron/+bug/1583694

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with an HTTP application on TCP port 80.
• These back-end servers have been configured with a health check at the URL path “/healthcheck”. See HTTP health monitors below.
• Neutron network public is a shared external network created by the cloud operator which is reachable from the internet.
• We want to configure a basic load balancer that is accessible from the internet, which distributes web requests to the back-end servers, and which checks the “/healthcheck” path to ensure back-end member health. Further, we want to do this using a floating IP.

Solution:

1. Create load balancer lb1 on subnet private-subnet.
2. Create listener listener1.
3. Create pool pool1 as listener1’s default pool.
4. Create a health monitor on pool1 which tests the “/healthcheck” path.
5. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.
6. Create a floating IP address on public-subnet.
7. Associate this floating IP with the lb1’s VIP port.

CLI commands:

neutron lbaas-loadbalancer-create --name lb1 private-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --name listener1 --loadbalancer lb1 --protocol HTTP --protocol-port 80
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP
neutron lbaas-healthmonitor-create --delay 5 --max-retries 4 --timeout 10 --type HTTP --url_path /healthcheck --pool pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1
neutron floatingip-create public
# The following IDs should be visible in the output of previous commands
neutron floatingip-associate <floating_ip_id> <load_balancer_vip_port_id>

Deploy a basic HTTP load balancer with session persistence¶

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with an HTTP application on TCP port 80.
• The application is written such that web clients should always be directed to the same back-end server throughout their web session, based on an application cookie inserted by the web application named ‘PHPSESSIONID’.
• These back-end servers have been configured with a health check at the URL path “/healthcheck”. See HTTP health monitors below.
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• We want to configure a basic load balancer that is accessible from the internet, which distributes web requests to the back-end servers, persists sessions using the PHPSESSIONID as a key, and which checks the “/healthcheck” path to ensure back-end member health.

Solution:

1. Create load balancer lb1 on subnet public-subnet.
2. Create listener listener1.
3. Create pool pool1 as listener1’s default pool which defines session persistence on the ‘PHPSESSIONID’ cookie.
4. Create a health monitor on pool1 which tests the “/healthcheck” path.
5. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.

CLI commands:

neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --name listener1 --loadbalancer lb1 --protocol HTTP --protocol-port 80
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP --session-persistence type=APP_COOKIE,cookie_name=PHPSESSIONID
neutron lbaas-healthmonitor-create --delay 5 --max-retries 4 --timeout 10 --type HTTP --url_path /healthcheck --pool pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1

Deploy a TCP load balancer¶

This is generally suitable when load balancing a non-HTTP TCP-based service.

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with an custom application on TCP port 23456
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• We want to configure a basic load balancer that is accessible from the internet, which distributes requests to the back-end servers.
• We want to employ a TCP health check to ensure that the back-end servers are available.

Solution:

1. Create load balancer lb1 on subnet public-subnet.
2. Create listener listener1.
3. Create pool pool1 as listener1’s default pool.
4. Create a health monitor on pool1 which probes pool1’s members’ TCP service port.
5. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.

CLI commands:

neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --name listener1 --loadbalancer lb1 --protocol TCP --protocol-port 23456
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol TCP
neutron lbaas-healthmonitor-create --delay 5 --max-retries 4 --timeout 10 --type TCP --pool pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1

Deploy a non-terminated HTTPS load balancer¶

A non-terminated HTTPS load balancer acts effectively like a generic TCP load balancer: The load balancer will forward the raw TCP traffic from the web client to the back-end servers without decrypting it. This means that the back-end servers themselves must be configured to terminate the HTTPS connection with the web clients, and in turn, the load balancer cannot insert headers into the HTTP session indicating the client IP address. (That is, to the back-end server, all web requests will appear to originate from the load balancer.) Also, advanced load balancer features (like Layer 7 functionality) cannot be used with non-terminated HTTPS.

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with a TLS-encrypted web application on TCP port 443.
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• We want to configure a basic load balancer that is accessible from the internet, which distributes requests to the back-end servers.
• We want to employ a TCP health check to ensure that the back-end servers are available.

Solution:

1. Create load balancer lb1 on subnet public-subnet.
2. Create listener listener1.
3. Create pool pool1 as listener1’s default pool.
4. Create a health monitor on pool1 which probes pool1’s members’ TCP service port.
5. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.

CLI commands:

neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --name listener1 --loadbalancer lb1 --protocol HTTPS --protocol-port 443
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTPS
neutron lbaas-healthmonitor-create --delay 5 --max-retries 4 --timeout 10 --type TCP --pool pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 443 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 443 pool1

Deploy a TLS-terminated HTTPS load balancer¶

With a TLS-terminated HTTPS load balancer, web clients communicate with the load balancer over TLS protocols. The load balancer terminates the TLS session and forwards the decrypted requests to the back-end servers. By terminating the TLS session on the load balancer, we offload the CPU-intensive encryption work to the load balancer, and enable the possibility of using advanced load balancer features, like Layer 7 features and header manipulation.

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with regular HTTP application on TCP port 80.
• These back-end servers have been configured with a health check at the URL path “/healthcheck”. See HTTP health monitors below.
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• A TLS certificate, key, and intermediate certificate chain for www.example.com have been obtained from an external certificate authority. These now exist in the files server.crt, server.key, and ca-chain.p7b in the current directory. The key and certificate are PEM-encoded, and the intermediate certificate chain is PKCS7 PEM encoded. The key is not encrypted with a passphrase.
• The admin user on this cloud installation has keystone ID admin_id
• We want to configure a TLS-terminated HTTPS load balancer that is accessible from the internet using the key and certificate mentioned above, which distributes requests to the back-end servers over the non-encrypted HTTP protocol.

Solution:

1. Create barbican secret resources for the certificate, key, and intermediate certificate chain. We will call these cert1, key1, and intermediates1 respectively.
2. Create a secret container resource combining all of the above. We will call this tls_container1.
3. Grant the admin user access to all the secret and secret container barbican resources above.
4. Create load balancer lb1 on subnet public-subnet.
5. Create listener listener1 as a TERMINATED_HTTPS listener referencing tls_container1 as its default TLS container.
6. Create pool pool1 as listener1’s default pool.
7. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.

CLI commands:

openstack secret store --name='cert1' --payload-content-type='text/plain' --payload="$(cat server.crt)"
openstack secret store --name='key1' --payload-content-type='text/plain' --payload="$(cat server.key)"
openstack secret store --name='intermediates1' --payload-content-type='text/plain' --payload="$(cat ca-chain.p7b)"
openstack secret container create --name='tls_container1' --type='certificate' --secret="certificate=$(openstack secret list | awk '/ cert1 / {print $2}')" --secret="private_key=$(openstack secret list | awk '/ key1 / {print $2}')" --secret="intermediates=$(openstack secret list | awk '/ intermediates1 / {print $2}')"
neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --loadbalancer lb1 --protocol-port 443 --protocol TERMINATED_HTTPS --name listener1 --default-tls-container=$(openstack secret container list | awk '/ tls_container1 / {print $2}')
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1

Deploy a TLS-terminated HTTPS load balancer with SNI¶

This example is exactly like Deploy a TLS-terminated HTTPS load balancer, except that we have multiple TLS certificates that we would like to use on the same listener using Server Name Indication (SNI) technology.

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with regular HTTP application on TCP port 80.
• These back-end servers have been configured with a health check at the URL path “/healthcheck”. See HTTP health monitors below.
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• TLS certificates, keys, and intermediate certificate chains for www.example.com and www2.example.com have been obtained from an external certificate authority. These now exist in the files server.crt, server.key, ca-chain.p7b, server2.crt, server2-encrypted.key, and ca-chain2.p7b in the current directory. The keys and certificates are PEM-encoded, and the intermediate certificate chains are PKCS7 PEM encoded.
• The key for www.example.com is not encrypted with a passphrase.
• The key for www2.example.com is encrypted with the passphrase “abc123”.
• The admin user on this cloud installation has keystone ID admin_id
• We want to configure a TLS-terminated HTTPS load balancer that is accessible from the internet using the keys and certificates mentioned above, which distributes requests to the back-end servers over the non-encrypted HTTP protocol.
• If a web client connects that is not SNI capable, we want the load balancer to respond with the certificate for www.example.com.

Solution:

1. Create barbican secret resources for the certificates, keys, and intermediate certificate chains. We will call these cert1, key1, intermediates1, cert2, key2 and intermediates2 respectively.
2. Create a barbican secret resource passphrase2 for the passphrase for key2
3. Create secret container resources combining the above appropriately. We will call these tls_container1 and tls_container2.
4. Grant the admin user access to all the secret and secret container barbican resources above.
5. Create load balancer lb1 on subnet public-subnet.
6. Create listener listener1 as a TERMINATED_HTTPS listener referencing tls_container1 as its default TLS container, and referencing both tls_container1 and tls_container2 using SNI.
7. Create pool pool1 as listener1’s default pool.
8. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.

CLI commands:

openstack secret store --name='cert1' --payload-content-type='text/plain' --payload="$(cat server.crt)"
openstack secret store --name='key1' --payload-content-type='text/plain' --payload="$(cat server.key)"
openstack secret store --name='intermediates1' --payload-content-type='text/plain' --payload="$(cat ca-chain.p7b)"
openstack secret container create --name='tls_container1' --type='certificate' --secret="certificate=$(openstack secret list | awk '/ cert1 / {print $2}')" --secret="private_key=$(openstack secret list | awk '/ key1 / {print $2}')" --secret="intermediates=$(openstack secret list | awk '/ intermediates1 / {print $2}')"
openstack secret store --name='cert2' --payload-content-type='text/plain' --payload="$(cat server2.crt)"
openstack secret store --name='key2' --payload-content-type='text/plain' --payload="$(cat server2-encrypted.key)"
openstack secret store --name='intermediates2' --payload-content-type='text/plain' --payload="$(cat ca-chain2.p7b)"
openstack secret store --name='passphrase2' --payload-content-type='text/plain' --payload="abc123"
openstack secret container create --name='tls_container2' --type='certificate' --secret="certificate=$(openstack secret list | awk '/ cert2 / {print $2}')" --secret="private_key=$(openstack secret list | awk '/ key2 / {print $2}')" --secret="intermediates=$(openstack secret list | awk '/ intermediates2 / {print $2}')" --secret="private_key_passphrase=$(openstack secret list | awk '/ passphrase2 / {print $2}')"
neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --loadbalancer lb1 --protocol-port 443 --protocol TERMINATED_HTTPS --name listener1 --default-tls-container=$(openstack secret container list | awk '/ tls_container1 / {print $2}') --sni-container_refs $(openstack secret container list | awk '/ tls_container1 / {print $2}') $(openstack secret container list | awk '/ tls_container2 / {print $2}')
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1

Deploy HTTP and TLS-terminated HTTPS load balancing on the same IP and backend¶

This example is exactly like Deploy a TLS-terminated HTTPS load balancer, except that we would like to have both an HTTP and TERMINATED_HTTPS listener that use the same back-end pool (and therefore, probably respond with the exact same content regardless of whether the web client uses the HTTP or HTTPS protocol to connect).

Please note that if you wish all HTTP requests to be redirected to HTTPS (so that requests are only served via HTTPS, and attempts to access content over HTTP just get redirected to the HTTPS listener), then please see the example in the Layer 7 Cookbook Using Neutron Client (deprecated).

Scenario description:

• Back-end servers 192.0.2.10 and 192.0.2.11 on subnet private-subnet have been configured with regular HTTP application on TCP port 80.
• These back-end servers have been configured with a health check at the URL path “/healthcheck”. See HTTP health monitors below.
• Subnet public-subnet is a shared external subnet created by the cloud operator which is reachable from the internet.
• A TLS certificate, key, and intermediate certificate chain for www.example.com have been obtained from an external certificate authority. These now exist in the files server.crt, server.key, and ca-chain.p7b in the current directory. The key and certificate are PEM-encoded, and the intermediate certificate chain is PKCS7 PEM encoded. The key is not encrypted with a passphrase.
• The admin user on this cloud installation has keystone ID admin_id
• We want to configure a TLS-terminated HTTPS load balancer that is accessible from the internet using the key and certificate mentioned above, which distributes requests to the back-end servers over the non-encrypted HTTP protocol.
• We also want to configure a HTTP load balancer on the same IP address as the above which serves the exact same content (ie. forwards to the same back-end pool) as the TERMINATED_HTTPS listener.

Solution:

1. Create barbican secret resources for the certificate, key, and intermediate certificate chain. We will call these cert1, key1, and intermediates1 respectively.
2. Create a secret container resource combining all of the above. We will call this tls_container1.
3. Grant the admin user access to all the secret and secret container barbican resources above.
4. Create load balancer lb1 on subnet public-subnet.
5. Create listener listener1 as a TERMINATED_HTTPS listener referencing tls_container1 as its default TLS container.
6. Create pool pool1 as listener1’s default pool.
7. Add members 192.0.2.10 and 192.0.2.11 on private-subnet to pool1.
8. Create listener listener2 as an HTTP listener with pool1 as its default pool.

CLI commands:

openstack secret store --name='cert1' --payload-content-type='text/plain' --payload="$(cat server.crt)"
openstack secret store --name='key1' --payload-content-type='text/plain' --payload="$(cat server.key)"
openstack secret store --name='intermediates1' --payload-content-type='text/plain' --payload="$(cat ca-chain.p7b)"
openstack secret container create --name='tls_container1' --type='certificate' --secret="certificate=$(openstack secret list | awk '/ cert1 / {print $2}')" --secret="private_key=$(openstack secret list | awk '/ key1 / {print $2}')" --secret="intermediates=$(openstack secret list | awk '/ intermediates1 / {print $2}')"
neutron lbaas-loadbalancer-create --name lb1 public-subnet
# Re-run the following until lb1 shows ACTIVE and ONLINE statuses:
neutron lbaas-loadbalancer-show lb1
neutron lbaas-listener-create --loadbalancer lb1 --protocol-port 443 --protocol TERMINATED_HTTPS --name listener1 --default-tls-container=$(openstack secret container list | awk '/ tls_container1 / {print $2}')
neutron lbaas-pool-create --name pool1 --lb-algorithm ROUND_ROBIN --listener listener1 --protocol HTTP
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.10 --protocol-port 80 pool1
neutron lbaas-member-create --subnet private-subnet --address 192.0.2.11 --protocol-port 80 pool1
neutron lbaas-listener-create --name listener2 --loadbalancer lb1 --protocol HTTP --protocol-port 80 --default-pool pool1

Heath monitor options¶

All of the health monitors Octavia supports have the following configurable options:

• delay: Number of seconds to wait between health checks.
• timeout: Number of seconds to wait for any given health check to complete. timeout should always be smaller than delay.
• max-retries: Number of subsequent health checks a given back-end server must fail before it is considered down, or that a failed back-end server must pass to be considered up again.

HTTP health monitors¶

In general, the application-side component of HTTP health checks are a part of the web application being load balanced. By default, Octavia will probe the “/” path on the application server. However, in many applications this is not appropriate because the “/” path ends up being a cached page, or causes the application server to do more work than is necessary for a basic health check.

In addition to the above options, HTTP health monitors also have the following options:

• url_path: Path part of the URL that should be retrieved from the back-end server. By default this is “/”.
• http_method: HTTP method that should be used to retrieve the url_path. By default this is “GET”.
• expected_codes: List of HTTP status codes that indicate an OK health check. By default this is just “200”.

Please keep the following best practices in mind when writing the code that generates the health check in your web application:

• The health monitor url_path should not require authentication to load.
• By default the health monitor url_path should return a HTTP 200 OK status code to indicate a healthy server unless you specify alternate expected_codes.
• The health check should do enough internal checks to ensure the application is healthy and no more. This may mean ensuring database or other external storage connections are up and running, server load is acceptable, the site is not in maintenance mode, and other tests specific to your application.
• The page generated by the health check should be very light weight:
  • It should return in a sub-second interval.
  • It should not induce significant load on the application server.
• The page generated by the health check should never be cached, though the code running the health check may reference cached data. For example, you may find it useful to run a more extensive health check via cron and store the results of this to disk. The code generating the page at the health monitor url_path would incorporate the results of this cron job in the tests it performs.
• Since Octavia only cares about the HTTP status code returned, and since health checks are run so frequently, it may make sense to use the “HEAD” or “OPTIONS” HTTP methods to cut down on unnecessary processing of a whole page.

Other heath monitors¶

Other health monitor types include PING, TCP, HTTPS, and TLS-HELLO.

PING health monitors send periodic ICMP PING requests to the back-end servers. Obviously, your back-end servers must be configured to allow PINGs in order for these health checks to pass.

TCP health monitors open a TCP connection to the back-end server’s protocol port. Your custom TCP application should be written to respond OK to the load balancer connecting, opening a TCP connection, and closing it again after the TCP handshake without sending any data.

HTTPS health monitors operate exactly like HTTP health monitors, but with ssl back-end servers. Unfortunately, this causes problems if the servers are performing client certificate validation, as HAProxy won’t have a valid cert. In this case, using TLS-HELLO type monitoring is an alternative.

TLS-HELLO health monitors simply ensure the back-end server responds to SSLv3 client hello messages. It will not check any other health metrics, like status code or body contents.

PEM-encoded chains¶

The simplest form of the intermediate chain is a PEM-encoded text file that either contains a sequence of individually-encoded PEM certificates, or a PEM encoded PKCS7 block(s). If this is the type of intermediate chain you have been provided, the file will contain either -----BEGIN PKCS7----- or -----BEGIN CERTIFICATE----- near the top of the file, and one or more blocks of 64-character lines of ASCII text (that will look like gobbedlygook to a human). These files are also typically named with a .crt or .pem extension.

To upload this type of intermediates chain to barbican, run a command similar to the following (assuming “intermediates-chain.pem” is the name of the file):

openstack secret store --name='intermediates1' --payload-content-type='text/plain' --payload="$(cat intermediates-chain.pem)"

DER-encoded chains¶

If the intermediates chain provided to you is a file that contains what appears to be random binary data, it is likely that it is a PKCS7 chain in DER format. These files also may be named with a .p7b extension. In order to use this intermediates chain, you can either convert it to a series of PEM-encoded certificates with the following command:

openssl pkcs7 -in intermediates-chain.p7b -inform DER -print_certs -out intermediates-chain.pem

…or convert it into a PEM-encoded PKCS7 bundle with the following command:

openssl pkcs7 -in intermediates-chain.p7b -inform DER -outform PEM -out intermediates-chain.pem

…or simply upload the binary DER file to barbican without conversion:

openstack secret store --name='intermediates1' --payload-content-type='application/octet-stream' --payload-content-encoding='base64' --payload="$(cat intermediates-chain.p7b | base64)"

In any case, if the file is not a PKCS7 DER bundle, then either of the above two openssl commands will fail.