Configuration Options
oslo.messaging uses oslo.config to define and manage configuration
options to allow the deployer to control how an application uses the
underlying messaging system.
DEFAULT
-
rpc_conn_pool_size
-
Size of RPC connection pool.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_conn_pool_size |
-
conn_pool_min_size
-
The pool size limit for connections expiration policy
-
conn_pool_ttl
Type: | integer |
Default: | 1200 |
The time-to-live in sec of idle connections in the pool
-
rpc_zmq_bind_address
-
ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_bind_address |
-
rpc_zmq_matchmaker
Type: | string |
Default: | redis |
Valid Values: | redis, dummy |
MatchMaker driver.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_matchmaker |
-
rpc_zmq_contexts
-
Number of ZeroMQ contexts, defaults to 1.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_contexts |
-
rpc_zmq_topic_backlog
Type: | integer |
Default: | <None> |
Maximum number of ingress messages to locally buffer per topic. Default is unlimited.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_topic_backlog |
-
rpc_zmq_ipc_dir
Type: | string |
Default: | /var/run/openstack |
Directory for holding IPC sockets.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_ipc_dir |
-
rpc_zmq_host
Type: | string |
Default: | localhost |
Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_host |
-
rpc_cast_timeout
-
Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only supported by impl_zmq.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_cast_timeout |
-
rpc_poll_timeout
-
The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_poll_timeout |
-
zmq_target_expire
-
Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).
Deprecated Variations
Group |
Name |
DEFAULT |
zmq_target_expire |
-
zmq_target_update
-
Update period in seconds of a name service record about existing target.
Deprecated Variations
Group |
Name |
DEFAULT |
zmq_target_update |
-
use_pub_sub
Type: | boolean |
Default: | true |
Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
Deprecated Variations
Group |
Name |
DEFAULT |
use_pub_sub |
-
use_router_proxy
Type: | boolean |
Default: | true |
Use ROUTER remote proxy.
Deprecated Variations
Group |
Name |
DEFAULT |
use_router_proxy |
-
rpc_zmq_min_port
Type: | port number |
Default: | 49153 |
Minimum Value: | 0 |
Maximum Value: | 65535 |
Minimal port number for random ports range.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_min_port |
-
rpc_zmq_max_port
Type: | integer |
Default: | 65536 |
Minimum Value: | 1 |
Maximum Value: | 65536 |
Maximal port number for random ports range.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_max_port |
-
rpc_zmq_bind_port_retries
-
Number of retries to find free port number before fail with ZMQBindError.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_bind_port_retries |
-
rpc_zmq_serialization
Type: | string |
Default: | json |
Valid Values: | json, msgpack |
Default serialization mechanism for serializing/deserializing outgoing/incoming messages
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_serialization |
-
zmq_immediate
Type: | boolean |
Default: | false |
This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.
-
executor_thread_pool_size
-
Size of executor thread pool.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_thread_pool_size |
-
rpc_response_timeout
-
Seconds to wait for a response from a call.
-
transport_url
Type: | string |
Default: | <None> |
A URL representing the messaging driver to use and its full configuration.
-
rpc_backend
Type: | string |
Default: | rabbit |
The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
control_exchange
Type: | string |
Default: | openstack |
The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.
matchmaker_redis
-
host
Type: | string |
Default: | 127.0.0.1 |
Host to locate redis.
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
port
Type: | port number |
Default: | 6379 |
Minimum Value: | 0 |
Maximum Value: | 65535 |
Use this port to connect to redis host.
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
password
-
Password for Redis server (optional).
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
sentinel_hosts
-
List of Redis Sentinel hosts (fault tolerance mode) e.g. [host:port, host1:port ... ]
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
sentinel_group_name
Type: | string |
Default: | oslo-messaging-zeromq |
Redis replica set name.
-
wait_timeout
Type: | integer |
Default: | 2000 |
Time in ms to wait between connection attempts.
-
check_timeout
Type: | integer |
Default: | 20000 |
Time in ms to wait before the transaction is killed.
-
socket_timeout
Type: | integer |
Default: | 10000 |
Timeout in ms on blocking socket operations
oslo_messaging_amqp
-
container_name
Type: | string |
Default: | <None> |
Name for the AMQP container. must be globally unique. Defaults to a generated UUID
Deprecated Variations
Group |
Name |
amqp1 |
container_name |
-
idle_timeout
-
Timeout for inactive connections (in seconds)
Deprecated Variations
Group |
Name |
amqp1 |
idle_timeout |
-
trace
Type: | boolean |
Default: | false |
Debug: dump AMQP frames to stdout
Deprecated Variations
Group |
Name |
amqp1 |
trace |
-
ssl_ca_file
-
CA certificate PEM file to verify server certificate
Deprecated Variations
Group |
Name |
amqp1 |
ssl_ca_file |
-
ssl_cert_file
-
Identifying certificate PEM file to present to clients
Deprecated Variations
Group |
Name |
amqp1 |
ssl_cert_file |
-
ssl_key_file
-
Private key PEM file used to sign cert_file certificate
Deprecated Variations
Group |
Name |
amqp1 |
ssl_key_file |
-
ssl_key_password
Type: | string |
Default: | <None> |
Password for decrypting ssl_key_file (if encrypted)
Deprecated Variations
Group |
Name |
amqp1 |
ssl_key_password |
-
allow_insecure_clients
Type: | boolean |
Default: | false |
Accept clients using either SSL or plain TCP
Deprecated Variations
Group |
Name |
amqp1 |
allow_insecure_clients |
-
sasl_mechanisms
-
Space separated list of acceptable SASL mechanisms
Deprecated Variations
Group |
Name |
amqp1 |
sasl_mechanisms |
-
sasl_config_dir
-
Path to directory that contains the SASL configuration
Deprecated Variations
Group |
Name |
amqp1 |
sasl_config_dir |
-
sasl_config_name
-
Name of configuration file (without .conf suffix)
Deprecated Variations
Group |
Name |
amqp1 |
sasl_config_name |
-
username
-
User name for message broker authentication
Deprecated Variations
Group |
Name |
amqp1 |
username |
-
password
-
Password for message broker authentication
Deprecated Variations
Group |
Name |
amqp1 |
password |
-
connection_retry_interval
Type: | integer |
Default: | 1 |
Minimum Value: | 1 |
Seconds to pause before attempting to re-connect.
-
connection_retry_backoff
Type: | integer |
Default: | 2 |
Minimum Value: | 0 |
Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.
-
connection_retry_interval_max
Type: | integer |
Default: | 30 |
Minimum Value: | 1 |
Maximum limit for connection_retry_interval + connection_retry_backoff
-
link_retry_delay
Type: | integer |
Default: | 10 |
Minimum Value: | 1 |
Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.
-
default_reply_timeout
Type: | integer |
Default: | 30 |
Minimum Value: | 5 |
The deadline for an rpc reply message delivery. Only used when caller does not provide a timeout expiry.
-
default_send_timeout
Type: | integer |
Default: | 30 |
Minimum Value: | 5 |
The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.
-
default_notify_timeout
Type: | integer |
Default: | 30 |
Minimum Value: | 5 |
The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.
-
addressing_mode
Type: | string |
Default: | dynamic |
Indicates the addressing mode used by the driver.
Permitted values:
‘legacy’ - use legacy non-routable addressing
‘routable’ - use routable addresses
‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing
-
server_request_prefix
Type: | string |
Default: | exclusive |
address prefix used when sending to a specific server
Deprecated Variations
Group |
Name |
amqp1 |
server_request_prefix |
-
broadcast_prefix
Type: | string |
Default: | broadcast |
address prefix used when broadcasting to all servers
Deprecated Variations
Group |
Name |
amqp1 |
broadcast_prefix |
-
group_request_prefix
Type: | string |
Default: | unicast |
address prefix when sending to any server in group
Deprecated Variations
Group |
Name |
amqp1 |
group_request_prefix |
-
rpc_address_prefix
Type: | string |
Default: | openstack.org/om/rpc |
Address prefix for all generated RPC addresses
-
notify_address_prefix
Type: | string |
Default: | openstack.org/om/notify |
Address prefix for all generated Notification addresses
-
multicast_address
Type: | string |
Default: | multicast |
Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.
-
unicast_address
Type: | string |
Default: | unicast |
Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.
-
anycast_address
Type: | string |
Default: | anycast |
Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.
-
default_notification_exchange
Type: | string |
Default: | <None> |
Exchange name used in notification addresses.
Exchange name resolution precedence:
Target.exchange if set
else default_notification_exchange if set
else control_exchange if set
else ‘notify’
-
default_rpc_exchange
Type: | string |
Default: | <None> |
Exchange name used in RPC addresses.
Exchange name resolution precedence:
Target.exchange if set
else default_rpc_exchange if set
else control_exchange if set
else ‘rpc’
-
reply_link_credit
Type: | integer |
Default: | 200 |
Minimum Value: | 1 |
Window size for incoming RPC Reply messages.
-
rpc_server_credit
Type: | integer |
Default: | 100 |
Minimum Value: | 1 |
Window size for incoming RPC Request messages
-
notify_server_credit
Type: | integer |
Default: | 100 |
Minimum Value: | 1 |
Window size for incoming Notification messages
oslo_messaging_notifications
-
driver
Type: | multi-valued |
Default: | |
The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop
Deprecated Variations
Group |
Name |
DEFAULT |
notification_driver |
-
transport_url
Type: | string |
Default: | <None> |
A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.
Deprecated Variations
Group |
Name |
DEFAULT |
notification_transport_url |
-
topics
Type: | list |
Default: | notifications |
AMQP topic used for OpenStack notifications.
Deprecated Variations
Group |
Name |
rpc_notifier2 |
topics |
DEFAULT |
notification_topics |
oslo_messaging_rabbit
-
amqp_durable_queues
Type: | boolean |
Default: | false |
Use durable queues in AMQP.
Deprecated Variations
Group |
Name |
DEFAULT |
amqp_durable_queues |
DEFAULT |
rabbit_durable_queues |
-
amqp_auto_delete
Type: | boolean |
Default: | false |
Auto-delete queues in AMQP.
Deprecated Variations
Group |
Name |
DEFAULT |
amqp_auto_delete |
-
kombu_ssl_version
-
SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.
Deprecated Variations
Group |
Name |
DEFAULT |
kombu_ssl_version |
-
kombu_ssl_keyfile
-
SSL key file (valid only if SSL enabled).
Deprecated Variations
Group |
Name |
DEFAULT |
kombu_ssl_keyfile |
-
kombu_ssl_certfile
-
SSL cert file (valid only if SSL enabled).
Deprecated Variations
Group |
Name |
DEFAULT |
kombu_ssl_certfile |
-
kombu_ssl_ca_certs
-
SSL certification authority file (valid only if SSL enabled).
Deprecated Variations
Group |
Name |
DEFAULT |
kombu_ssl_ca_certs |
-
kombu_reconnect_delay
Type: | floating point |
Default: | 1.0 |
How long to wait before reconnecting in response to an AMQP consumer cancel notification.
Deprecated Variations
Group |
Name |
DEFAULT |
kombu_reconnect_delay |
-
kombu_compression
Type: | string |
Default: | <None> |
EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.
-
kombu_missing_consumer_retry_timeout
-
How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.
Deprecated Variations
Group |
Name |
oslo_messaging_rabbit |
kombu_reconnect_timeout |
-
kombu_failover_strategy
Type: | string |
Default: | round-robin |
Valid Values: | round-robin, shuffle |
Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.
-
rabbit_host
Type: | string |
Default: | localhost |
The RabbitMQ broker address where a single node is used.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_host |
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
rabbit_port
Type: | port number |
Default: | 5672 |
Minimum Value: | 0 |
Maximum Value: | 65535 |
The RabbitMQ broker port where a single node is used.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_port |
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
rabbit_hosts
Type: | list |
Default: | $rabbit_host:$rabbit_port |
RabbitMQ HA cluster host:port pairs.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_hosts |
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
rabbit_use_ssl
Type: | boolean |
Default: | false |
Connect over SSL for RabbitMQ.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_use_ssl |
-
rabbit_userid
Type: | string |
Default: | guest |
The RabbitMQ userid.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_userid |
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
rabbit_password
Type: | string |
Default: | guest |
The RabbitMQ password.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_password |
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
rabbit_login_method
Type: | string |
Default: | AMQPLAIN |
The RabbitMQ login method.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_login_method |
-
rabbit_virtual_host
-
The RabbitMQ virtual host.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_virtual_host |
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
Reason: | Replaced by [DEFAULT]/transport_url |
-
rabbit_retry_interval
-
How frequently to retry connecting with RabbitMQ.
-
rabbit_retry_backoff
-
How long to backoff for between retries when connecting to RabbitMQ.
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_retry_backoff |
-
rabbit_interval_max
-
Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-
rabbit_max_retries
-
Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_max_retries |
Warning
This option is deprecated for removal.
Its value may be silently ignored
in the future.
-
rabbit_ha_queues
Type: | boolean |
Default: | false |
Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “
Deprecated Variations
Group |
Name |
DEFAULT |
rabbit_ha_queues |
-
rabbit_transient_queues_ttl
Type: | integer |
Default: | 1800 |
Minimum Value: | 1 |
Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.
-
rabbit_qos_prefetch_count
-
Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.
-
heartbeat_timeout_threshold
-
Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL
-
heartbeat_rate
-
How often times during the heartbeat_timeout_threshold we check the heartbeat.
-
fake_rabbit
Type: | boolean |
Default: | false |
Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
Deprecated Variations
Group |
Name |
DEFAULT |
fake_rabbit |
-
channel_max
Type: | integer |
Default: | <None> |
Maximum number of channels to allow
-
frame_max
Type: | integer |
Default: | <None> |
The maximum byte size for an AMQP frame
-
heartbeat_interval
-
How often to send heartbeats for consumer’s connections
-
ssl
Type: | boolean |
Default: | <None> |
Enable SSL
-
ssl_options
-
Arguments passed to ssl.wrap_socket
-
socket_timeout
Type: | floating point |
Default: | 0.25 |
Set socket timeout in seconds for connection’s socket
-
tcp_user_timeout
Type: | floating point |
Default: | 0.25 |
Set TCP_USER_TIMEOUT in seconds for connection’s socket
-
host_connection_reconnect_delay
Type: | floating point |
Default: | 0.25 |
Set delay for reconnection to some host which has connection error
-
connection_factory
Type: | string |
Default: | single |
Valid Values: | new, single, read_write |
Connection factory implementation
-
pool_max_size
-
Maximum number of connections to keep queued.
-
pool_max_overflow
-
Maximum number of connections to create above pool_max_size.
-
pool_timeout
-
Default number of seconds to wait for a connections to available
-
pool_recycle
-
Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on acquire.
-
pool_stale
-
Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness. Stale connections are closed on acquire.
-
notification_persistence
Type: | boolean |
Default: | false |
Persist notification messages.
-
default_notification_exchange
Type: | string |
Default: | ${control_exchange}_notification |
Exchange name for sending notifications
-
notification_listener_prefetch_count
-
Max number of not acknowledged message which RabbitMQ can send to notification listener.
-
default_notification_retry_attempts
-
Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.
-
notification_retry_delay
Type: | floating point |
Default: | 0.25 |
Reconnecting retry delay in case of connectivity problem during sending notification message
-
rpc_queue_expiration
-
Time to live for rpc queues without consumers in seconds.
-
default_rpc_exchange
Type: | string |
Default: | ${control_exchange}_rpc |
Exchange name for sending RPC messages
-
rpc_reply_exchange
Type: | string |
Default: | ${control_exchange}_rpc_reply |
Exchange name for receiving RPC replies
-
rpc_listener_prefetch_count
-
Max number of not acknowledged message which RabbitMQ can send to rpc listener.
-
rpc_reply_listener_prefetch_count
-
Max number of not acknowledged message which RabbitMQ can send to rpc reply listener.
-
rpc_reply_retry_attempts
-
Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during rpc_timeout
-
rpc_reply_retry_delay
Type: | floating point |
Default: | 0.25 |
Reconnecting retry delay in case of connectivity problem during sending reply.
-
default_rpc_retry_attempts
-
Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If actual retry attempts in not 0 the rpc request could be processed more then one time
-
rpc_retry_delay
Type: | floating point |
Default: | 0.25 |
Reconnecting retry delay in case of connectivity problem during sending RPC message
oslo_messaging_zmq
-
rpc_zmq_bind_address
-
ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_bind_address |
-
rpc_zmq_matchmaker
Type: | string |
Default: | redis |
Valid Values: | redis, dummy |
MatchMaker driver.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_matchmaker |
-
rpc_zmq_contexts
-
Number of ZeroMQ contexts, defaults to 1.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_contexts |
-
rpc_zmq_topic_backlog
Type: | integer |
Default: | <None> |
Maximum number of ingress messages to locally buffer per topic. Default is unlimited.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_topic_backlog |
-
rpc_zmq_ipc_dir
Type: | string |
Default: | /var/run/openstack |
Directory for holding IPC sockets.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_ipc_dir |
-
rpc_zmq_host
Type: | string |
Default: | localhost |
Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_host |
-
rpc_cast_timeout
-
Seconds to wait before a cast expires (TTL). The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Only supported by impl_zmq.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_cast_timeout |
-
rpc_poll_timeout
-
The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_poll_timeout |
-
zmq_target_expire
-
Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).
Deprecated Variations
Group |
Name |
DEFAULT |
zmq_target_expire |
-
zmq_target_update
-
Update period in seconds of a name service record about existing target.
Deprecated Variations
Group |
Name |
DEFAULT |
zmq_target_update |
-
use_pub_sub
Type: | boolean |
Default: | true |
Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
Deprecated Variations
Group |
Name |
DEFAULT |
use_pub_sub |
-
use_router_proxy
Type: | boolean |
Default: | true |
Use ROUTER remote proxy.
Deprecated Variations
Group |
Name |
DEFAULT |
use_router_proxy |
-
rpc_zmq_min_port
Type: | port number |
Default: | 49153 |
Minimum Value: | 0 |
Maximum Value: | 65535 |
Minimal port number for random ports range.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_min_port |
-
rpc_zmq_max_port
Type: | integer |
Default: | 65536 |
Minimum Value: | 1 |
Maximum Value: | 65536 |
Maximal port number for random ports range.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_max_port |
-
rpc_zmq_bind_port_retries
-
Number of retries to find free port number before fail with ZMQBindError.
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_bind_port_retries |
-
rpc_zmq_serialization
Type: | string |
Default: | json |
Valid Values: | json, msgpack |
Default serialization mechanism for serializing/deserializing outgoing/incoming messages
Deprecated Variations
Group |
Name |
DEFAULT |
rpc_zmq_serialization |
-
zmq_immediate
Type: | boolean |
Default: | false |
This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.
API
-
oslo_messaging.opts.list_opts()
Return a list of oslo.config options available in the library.
The returned list includes all oslo.config options which may be registered
at runtime by the library.
Each element of the list is a tuple. The first element is the name of the
group under which the list of elements in the second element will be
registered. A group name of None corresponds to the [DEFAULT] group in
config files.
This function is also discoverable via the ‘oslo_messaging’ entry point
under the ‘oslo.config.opts’ namespace.
The purpose of this is to allow tools like the Oslo sample config file
generator to discover the options exposed to users by this library.
Returns: | a list of (group_name, opts) tuples |