6.19. Fuel Containerized Control Plane performance report during upgrade¶

Abstract: This document includes OpenStack Networking (aka Neutron) performance test results during upgrade from Mitaka to Newton. All tests have been performed regarding OpenStack Neutron Testing During Open Stack Upgrade Test Plan

6.19.1. Environment description¶

For Kubernetes pre-deployment Kargo tool was used. More information about fuel-ccp and how it can be installed can be found in official documentation.

6.19.1.1. Hardware configuration of each server¶

All servers have configuration describing in table below

Description of servers hardware¶
server	vendor,model	HP,DL380 Gen9
CPU	vendor,model	Intel,E5-2680 v3
	processor_count	2
	core_count	12
	frequency_MHz	2500
RAM	vendor,model	HP,752369-081
RAM	amount_MB	262144
NETWORK	interface_name	ens4f1
	vendor,model	Intel,X710 Dual Port
	bandwidth	10G
	interface_name	p1p1
	vendor,model	Intel,X710 Dual Port
	bandwidth	10G
STORAGE	dev_name	/dev/sda
	vendor,model	raid10 - HP P840 12 disks EH0600JEDHE
	SSD/HDD	HDD
	size	3,6TB

6.19.1.2. Network configuration of each server¶

All servers have same network configuration:

6.19.1.3. Fuel CCP configuration¶

CCP main configuration ccp.yaml

CCP Cluster configuration configs.yaml

CCP Cluster topology topology.yaml

CCP repositories configuration repos.yaml

CCP versions configuration for Mitaka versions-mitaka.yaml

CCP versions configuration for upgrade from Mitaka to Newton versions-newton.yaml

6.19.1.4. Upgrade and tests procedure¶

Install fuel-ccp
Rename ccp.yaml to /root/.ccp.ymal
Copy all yaml files to /root/
Rename versions-mitaka.yaml to versions.yaml
Execute ccp deploy and wait ok status for all services
Install shaker
On the node 172.20.9.40 execute shaker --scenario openstack/full_l2 --os-insecure --report full-l2.html --server-endpoint 172.20.9.40:31998
Wait message INFO shaker.engine.quorum [-] Finished processing operation: <shaker.engine.quorum.JoinOperation... from shaker
Rename versions-newton.yaml to versions.yaml
Execute ccp deploy and wait ok status for all services
Wait tests results from shaker

6.19.2. Test results¶

Shaker provides statistics about maximum, minimum and mean values of different connection measurements. For each test was found the maximum among all maximum values, minimum among all minimum values and counts the mean value from all mean values.

6.19.2.1. Test Case 1: Analysis of L2 metrics during Open Stack upgrade¶

Full L2 test results¶
Losts	Errors	Full report
10	0	`L2 Full tests report`

6.19.2.2. Test Case 2: Analysis of L3 metrics during Open Stack upgrade¶

Full L3 East West test results¶
Losts	Errors	Full report
0	11	`L3 East West Full tests report`

6.19. Fuel Containerized Control Plane performance report during upgrade