Command Reference¶

List of released CLI commands available in openstack client. These commands can be referenced by doing openstack help baremetal.

baremetal allocation¶

baremetal allocation create¶

Create a new baremetal allocation.

openstack baremetal allocation create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--resource-class RESOURCE_CLASS]
    [--trait TRAITS]
    [--candidate-node CANDIDATE_NODES]
    [--name NAME]
    [--uuid UUID]
    [--owner OWNER]
    [--extra <key=value>]
    [--wait [<time-out>]]
    [--node NODE]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--resource-class <RESOURCE_CLASS>¶: Resource class to request.

--trait <TRAITS>¶: A trait to request. Can be specified multiple times.

--candidate-node <CANDIDATE_NODES>¶: A candidate node for this allocation. Can be specified multiple times. If at least one is specified, only the provided candidate nodes are considered for the allocation.

--name <NAME>¶: Unique name of the allocation.

--uuid <UUID>¶: UUID of the allocation.

--owner <OWNER>¶: Owner of the allocation.

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

--wait <time-out>¶: Wait for the new allocation to become active. An error is returned if allocation fails and –wait is used. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

--node <NODE>¶: Backfill this allocation from the provided node that has already been deployed. Bypasses the normal allocation process.

This command is provided by the python-ironicclient plugin.

baremetal allocation delete¶

Unregister baremetal allocation(s).

openstack baremetal allocation delete <allocation> [<allocation> ...]

allocation¶: Allocations(s) to delete (name or UUID).

This command is provided by the python-ironicclient plugin.

baremetal allocation list¶

List baremetal allocations.

openstack baremetal allocation list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--limit <limit>]
    [--marker <allocation>]
    [--sort <key>[:<direction>]]
    [--node <node>]
    [--resource-class <resource_class>]
    [--state <state>]
    [--owner <owner>]
    [--long | --fields <field> [<field> ...]]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--limit <limit>¶: Maximum number of allocations to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service.

--marker <allocation>¶: Allocation UUID (for example, of the last allocation in the list from a previous request). Returns the list of allocations after this UUID.

--sort <key>[:<direction>]¶: Sort output by specified allocation fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma.

--node <node>¶: Only list allocations of this node (name or UUID).

--resource-class <resource_class>¶: Only list allocations with this resource class.

--state <state>¶: Only list allocations in this state.

--owner <owner>¶: Only list allocations with this owner.

--long¶: Show detailed information about the allocations.

--fields <field>¶: One or more allocation fields. Only these fields will be fetched from the server. Can not be used when ‘–long’ is specified.

This command is provided by the python-ironicclient plugin.

baremetal allocation set¶

Set baremetal allocation properties.

openstack baremetal allocation set
    [--name <name>]
    [--extra <key=value>]
    <allocation>

--name <name>¶: Set the name of the allocation

--extra <key=value>¶: Extra property to set on this allocation (repeat option to set multiple extra properties)

allocation¶: Name or UUID of the allocation

This command is provided by the python-ironicclient plugin.

baremetal allocation show¶

Show baremetal allocation details.

openstack baremetal allocation show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--fields <field> [<field> ...]]
    <id>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--fields <field>¶: One or more allocation fields. Only these fields will be fetched from the server.

id¶: UUID or name of the allocation

This command is provided by the python-ironicclient plugin.

baremetal allocation unset¶

Unset baremetal allocation properties.

openstack baremetal allocation unset
    [--name]
    [--extra <key>]
    <allocation>

--name¶: Unset the name of the allocation

--extra <key>¶: Extra property to unset on this baremetal allocation (repeat option to unset multiple extra property).

allocation¶: Name or UUID of the allocation

This command is provided by the python-ironicclient plugin.

baremetal chassis¶

baremetal chassis create¶

Create a new chassis.

openstack baremetal chassis create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--description <description>]
    [--extra <key=value>]
    [--uuid <uuid>]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--description <description>¶: Description for the chassis

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

--uuid <uuid>¶: Unique UUID of the chassis

This command is provided by the python-ironicclient plugin.

baremetal chassis delete¶

Delete a chassis.

openstack baremetal chassis delete <chassis> [<chassis> ...]

chassis¶: UUIDs of chassis to delete

This command is provided by the python-ironicclient plugin.

baremetal chassis list¶

List the chassis.

openstack baremetal chassis list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--fields <field> [<field> ...]]
    [--limit <limit>]
    [--long]
    [--marker <chassis>]
    [--sort <key>[:<direction>]]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--fields <field>¶: One or more chassis fields. Only these fields will be fetched from the server. Cannot be used when ‘–long’ is specified.

--limit <limit>¶: Maximum number of chassis to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service.

--long¶: Show detailed information about the chassis

--marker <chassis>¶: Chassis UUID (for example, of the last chassis in the list from a previous request). Returns the list of chassis after this UUID.

--sort <key>[:<direction>]¶: Sort output by specified chassis fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma.

This command is provided by the python-ironicclient plugin.

baremetal chassis set¶

Set chassis properties.

openstack baremetal chassis set
    [--description <description>]
    [--extra <key=value>]
    <chassis>

--description <description>¶: Set the description of the chassis

--extra <key=value>¶: Extra to set on this chassis (repeat option to set multiple extras)

chassis¶: UUID of the chassis

This command is provided by the python-ironicclient plugin.

baremetal chassis show¶

Show chassis details.

openstack baremetal chassis show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--fields <field> [<field> ...]]
    <chassis>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--fields <field>¶: One or more chassis fields. Only these fields will be fetched from the server.

chassis¶: UUID of the chassis

This command is provided by the python-ironicclient plugin.

baremetal chassis unset¶

Unset chassis properties.

openstack baremetal chassis unset
    [--description]
    [--extra <key>]
    <chassis>

--description¶: Clear the chassis description

--extra <key>¶: Extra to unset on this chassis (repeat option to unset multiple extras)

chassis¶: UUID of the chassis

This command is provided by the python-ironicclient plugin.

baremetal create¶

Create resources from files

openstack baremetal create <file> [<file> ...]

file¶: File (.yaml or .json) containing descriptions of the resources to create. Can be specified multiple times.

This command is provided by the python-ironicclient plugin.

baremetal driver¶

baremetal driver list¶

List the enabled drivers.

openstack baremetal driver list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--type <type>]
    [--long]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--type <type>¶: Type of driver (“classic” or “dynamic”). The default is to list all of them.

--long¶: Show detailed information about the drivers.

This command is provided by the python-ironicclient plugin.

baremetal driver passthru call¶

Call a vendor passthru method for a driver.

openstack baremetal driver passthru call
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--arg <key=value>]
    [--http-method <http-method>]
    <driver>
    <method>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--arg <key=value>¶: Argument to pass to the passthru method (repeat option to specify multiple arguments).

--http-method <http-method>¶: The HTTP method to use in the passthru request. One of DELETE, GET, PATCH, POST, PUT. Defaults to ‘POST’.

driver¶: Name of the driver.

method¶: Vendor passthru method to be called.

This command is provided by the python-ironicclient plugin.

baremetal driver passthru list¶

List available vendor passthru methods for a driver.

openstack baremetal driver passthru list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <driver>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

driver¶: Name of the driver.

This command is provided by the python-ironicclient plugin.

baremetal driver property list¶

List the driver properties.

openstack baremetal driver property list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <driver>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

driver¶: Name of the driver.

This command is provided by the python-ironicclient plugin.

baremetal driver raid property list¶

List a driver’s RAID logical disk properties.

openstack baremetal driver raid property list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <driver>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

driver¶: Name of the driver.

This command is provided by the python-ironicclient plugin.

baremetal driver show¶

Show information about a driver.

openstack baremetal driver show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <driver>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

driver¶: Name of the driver.

This command is provided by the python-ironicclient plugin.

baremetal node¶

baremetal node abort¶

Set provision state of baremetal node to ‘abort’

openstack baremetal node abort <node>

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node add trait¶

Add traits to a node.

openstack baremetal node add trait <node> <trait> [<trait> ...]

node¶: Name or UUID of the node

trait¶: Trait(s) to add

This command is provided by the python-ironicclient plugin.

baremetal node adopt¶

Set provision state of baremetal node to ‘adopt’

openstack baremetal node adopt [--wait [<time-out>]] <node>

--wait <time-out>¶: Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node bios setting list¶

List a node’s BIOS settings.

openstack baremetal node bios setting list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node bios setting show¶

Show a specific BIOS setting for a node.

openstack baremetal node bios setting show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <node>
    <setting
    name>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

node¶: Name or UUID of the node

setting name¶: Setting name to show

This command is provided by the python-ironicclient plugin.

baremetal node boot device set¶

Set the boot device for a node

openstack baremetal node boot device set [--persistent] <node> <device>

--persistent¶: Make changes persistent for all future boots

node¶: Name or UUID of the node

device¶: One of bios, cdrom, disk, pxe, safe, wanboot

This command is provided by the python-ironicclient plugin.

baremetal node boot device show¶

Show the boot device information for a node

openstack baremetal node boot device show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--supported]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--supported¶: Show the supported boot devices

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node clean¶

Set provision state of baremetal node to ‘clean’

openstack baremetal node clean
    [--wait [<time-out>]]
    --clean-steps <clean-steps>
    <node>

--wait <time-out>¶: Wait for a node to reach the desired state, manageable. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

--clean-steps <clean-steps>¶: The clean steps in JSON format. May be the path to a file containing the clean steps; OR ‘-‘, with the clean steps being read from standard input; OR a string. The value should be a list of clean-step dictionaries; each dictionary should have keys ‘interface’ and ‘step’, and optional key ‘args’.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node console disable¶

Disable console access for a node

openstack baremetal node console disable <node>

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node console enable¶

Enable console access for a node

openstack baremetal node console enable <node>

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node console show¶

Show console information for a node

openstack baremetal node console show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node create¶

openstack baremetal node create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--chassis-uuid <chassis>]
    --driver <driver>
    [--driver-info <key=value>]
    [--property <key=value>]
    [--extra <key=value>]
    [--uuid <uuid>]
    [--name <name>]
    [--bios-interface <bios_interface>]
    [--boot-interface <boot_interface>]
    [--console-interface <console_interface>]
    [--deploy-interface <deploy_interface>]
    [--inspect-interface <inspect_interface>]
    [--management-interface <management_interface>]
    [--network-data <network data>]
    [--network-interface <network_interface>]
    [--power-interface <power_interface>]
    [--raid-interface <raid_interface>]
    [--rescue-interface <rescue_interface>]
    [--storage-interface <storage_interface>]
    [--vendor-interface <vendor_interface>]
    [--resource-class <resource_class>]
    [--conductor-group <conductor_group>]
    [--automated-clean]
    [--owner <owner>]
    [--lessee <lessee>]
    [--description <description>]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--chassis-uuid <chassis>¶: UUID of the chassis that this node belongs to.

--driver <driver>¶: Driver used to control the node [REQUIRED].

--driver-info <key=value>¶: Key/value pair used by the driver, such as out-of-band management credentials. Can be specified multiple times.

--property <key=value>¶: Key/value pair describing the physical characteristics of the node. This is exported to Nova and used by the scheduler. Can be specified multiple times.

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

--uuid <uuid>¶: Unique UUID for the node.

--name <name>¶: Unique name for the node.

--bios-interface <bios_interface>¶: BIOS interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--boot-interface <boot_interface>¶: Boot interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--console-interface <console_interface>¶: Console interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--deploy-interface <deploy_interface>¶: Deploy interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--inspect-interface <inspect_interface>¶: Inspect interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--management-interface <management_interface>¶: Management interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--network-data <network data>¶: JSON string or a file or ‘-‘ for stdin to read static network configuration for the baremetal node associated with this ironic node. Format of this file should comply with Nova network data metadata (network_data.json). Depending on ironic boot interface capabilities being used, network configuration may or may not been served to the node for offline network configuration.

--network-interface <network_interface>¶: Network interface used for switching node to cleaning/provisioning networks.

--power-interface <power_interface>¶: Power interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--raid-interface <raid_interface>¶: RAID interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--rescue-interface <rescue_interface>¶: Rescue interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--storage-interface <storage_interface>¶: Storage interface used by the node’s driver.

--vendor-interface <vendor_interface>¶: Vendor interface used by the node’s driver. This is only applicable when the specified –driver is a hardware type.

--resource-class <resource_class>¶: Resource class for mapping nodes to Nova flavors

--conductor-group <conductor_group>¶: Conductor group the node will belong to

--automated-clean¶: Enable automated cleaning for the node

--owner <owner>¶: Owner of the node.

--lessee <lessee>¶: Lessee of the node.

--description <description>¶: Description for the node.

This command is provided by the python-ironicclient plugin.

baremetal node delete¶

Unregister baremetal node(s)

openstack baremetal node delete <node> [<node> ...]

node¶: Node(s) to delete (name or UUID)

This command is provided by the python-ironicclient plugin.

baremetal node deploy¶

Set provision state of baremetal node to ‘deploy’

openstack baremetal node deploy
    [--wait [<time-out>]]
    [--config-drive <config-drive>]
    <node>

--wait <time-out>¶: Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

--config-drive <config-drive>¶: A gzipped, base64-encoded configuration drive string OR the path to the configuration drive file OR the path to a directory containing the config drive files OR a JSON object to build config drive from. In case it’s a directory, a config drive will be generated from it. In case it’s a JSON object with optional keys meta_data, user_data and network_data, a config drive will be generated on the server side (see the bare metal API reference for more details).

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node inject nmi¶

Inject NMI to baremetal node

openstack baremetal node inject nmi <node>

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node inspect¶

Set provision state of baremetal node to ‘inspect’

openstack baremetal node inspect [--wait [<time-out>]] <node>

--wait <time-out>¶: Wait for a node to reach the desired state, manageable. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node list¶

List baremetal nodes

openstack baremetal node list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--limit <limit>]
    [--marker <node>]
    [--sort <key>[:<direction>]]
    [--maintenance | --no-maintenance]
    [--retired | --no-retired]
    [--fault <fault>]
    [--associated | --unassociated]
    [--provision-state <provision state>]
    [--driver <driver>]
    [--resource-class <resource class>]
    [--conductor-group <conductor_group>]
    [--conductor <conductor>]
    [--chassis <chassis UUID>]
    [--owner <owner>]
    [--lessee <lessee>]
    [--description-contains <description_contains>]
    [--long | --fields <field> [<field> ...]]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--limit <limit>¶: Maximum number of nodes to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service.

--marker <node>¶: Node UUID (for example, of the last node in the list from a previous request). Returns the list of nodes after this UUID.

--sort <key>[:<direction>]¶: Sort output by specified node fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma.

--maintenance¶: Limit list to nodes in maintenance mode

--no-maintenance¶: Limit list to nodes not in maintenance mode

--retired¶: Limit list to retired nodes.

--no-retired¶: Limit list to not retired nodes.

--fault <fault>¶: List nodes in specified fault.

--associated¶: List only nodes associated with an instance.

--unassociated¶: List only nodes not associated with an instance.

--provision-state <provision state>¶: List nodes in specified provision state.

--driver <driver>¶: Limit list to nodes with driver <driver>

--resource-class <resource class>¶: Limit list to nodes with resource class <resource class>

--conductor-group <conductor_group>¶: Limit list to nodes with conductor group <conductor group>

--conductor <conductor>¶: Limit list to nodes with conductor <conductor>

--chassis <chassis UUID>¶: Limit list to nodes of this chassis

--owner <owner>¶: Limit list to nodes with owner <owner>

--lessee <lessee>¶: Limit list to nodes with lessee <lessee>

--description-contains <description_contains>¶: Limit list to nodes with description contains <description_contains>

--long¶: Show detailed information about the nodes.

--fields <field>¶: One or more node fields. Only these fields will be fetched from the server. Can not be used when ‘–long’ is specified.

This command is provided by the python-ironicclient plugin.

baremetal node maintenance set¶

Set baremetal node to maintenance mode

openstack baremetal node maintenance set [--reason <reason>] <node>

--reason <reason>¶: Reason for setting maintenance mode.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node maintenance unset¶

Unset baremetal node from maintenance mode

openstack baremetal node maintenance unset <node>

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node manage¶

Set provision state of baremetal node to ‘manage’

openstack baremetal node manage [--wait [<time-out>]] <node>

--wait <time-out>¶: Wait for a node to reach the desired state, manageable. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node passthru call¶

Call a vendor passthu method for a node

openstack baremetal node passthru call
    [--arg <key=value>]
    [--http-method <http-method>]
    <node>
    <method>

--arg <key=value>¶: Argument to pass to the passthru method (repeat option to specify multiple arguments)

--http-method <http-method>¶: The HTTP method to use in the passthru request. One of DELETE, GET, PATCH, POST, PUT. Defaults to POST.

node¶: Name or UUID of the node

method¶: Vendor passthru method to be executed

This command is provided by the python-ironicclient plugin.

baremetal node passthru list¶

List vendor passthru methods for a node

openstack baremetal node passthru list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node power off¶

Power off a node

openstack baremetal node power off
    [--power-timeout <power-timeout>]
    [--soft]
    <node>

--power-timeout <power-timeout>¶: Timeout (in seconds, positive integer) to wait for the target power state before erroring out.

--soft¶: Request graceful power-off.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node power on¶

Power on a node

openstack baremetal node power on
    [--power-timeout <power-timeout>]
    <node>

--power-timeout <power-timeout>¶: Timeout (in seconds, positive integer) to wait for the target power state before erroring out.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node provide¶

Set provision state of baremetal node to ‘provide’

openstack baremetal node provide [--wait [<time-out>]] <node>

--wait <time-out>¶: Wait for a node to reach the desired state, available. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node reboot¶

Reboot baremetal node

openstack baremetal node reboot
    [--soft]
    [--power-timeout <power-timeout>]
    <node>

--soft¶: Request Graceful reboot.

--power-timeout <power-timeout>¶: Timeout (in seconds, positive integer) to wait for the target power state before erroring out.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node rebuild¶

Set provision state of baremetal node to ‘rebuild’

openstack baremetal node rebuild
    [--wait [<time-out>]]
    [--config-drive <config-drive>]
    <node>

--wait <time-out>¶: Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

--config-drive <config-drive>¶: A gzipped, base64-encoded configuration drive string OR the path to the configuration drive file OR the path to a directory containing the config drive files OR a JSON object to build config drive from. In case it’s a directory, a config drive will be generated from it. In case it’s a JSON object with optional keys meta_data, user_data and network_data, a config drive will be generated on the server side (see the bare metal API reference for more details).

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node remove trait¶

Remove trait(s) from a node.

openstack baremetal node remove trait
    [--all]
    <node>
    [<trait> [<trait> ...]]

--all¶: Remove all traits

node¶: Name or UUID of the node

trait¶: Trait(s) to remove

This command is provided by the python-ironicclient plugin.

baremetal node rescue¶

Set provision state of baremetal node to ‘rescue’

openstack baremetal node rescue
    [--wait [<time-out>]]
    --rescue-password <rescue-password>
    <node>

--wait <time-out>¶: Wait for a node to reach the desired state, rescue. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

--rescue-password <rescue-password>¶: The password that will be used to login to the rescue ramdisk. The value should be a non-empty string.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node set¶

Set baremetal properties

openstack baremetal node set
    [--instance-uuid <uuid>]
    [--name <name>]
    [--chassis-uuid <chassis UUID>]
    [--driver <driver>]
    [--bios-interface <bios_interface> | --reset-bios-interface]
    [--boot-interface <boot_interface> | --reset-boot-interface]
    [--console-interface <console_interface> | --reset-console-interface]
    [--deploy-interface <deploy_interface> | --reset-deploy-interface]
    [--inspect-interface <inspect_interface> | --reset-inspect-interface]
    [--management-interface <management_interface> | --reset-management-interface]
    [--network-interface <network_interface> | --reset-network-interface]
    [--network-data <network data>]
    [--power-interface <power_interface> | --reset-power-interface]
    [--raid-interface <raid_interface> | --reset-raid-interface]
    [--rescue-interface <rescue_interface> | --reset-rescue-interface]
    [--storage-interface <storage_interface> | --reset-storage-interface]
    [--vendor-interface <vendor_interface> | --reset-vendor-interface]
    [--reset-interfaces]
    [--resource-class <resource_class>]
    [--conductor-group <conductor_group>]
    [--automated-clean]
    [--protected]
    [--protected-reason <protected_reason>]
    [--retired]
    [--retired-reason <retired_reason>]
    [--target-raid-config <target_raid_config>]
    [--property <key=value>]
    [--extra <key=value>]
    [--driver-info <key=value>]
    [--instance-info <key=value>]
    [--owner <owner>]
    [--lessee <lessee>]
    [--description <description>]
    <node>

--instance-uuid <uuid>¶: Set instance UUID of node to <uuid>

--name <name>¶: Set the name of the node

--chassis-uuid <chassis UUID>¶: Set the chassis for the node

--driver <driver>¶: Set the driver for the node

--bios-interface <bios_interface>¶: Set the BIOS interface for the node

--reset-bios-interface¶: Reset the BIOS interface to its hardware type default

--boot-interface <boot_interface>¶: Set the boot interface for the node

--reset-boot-interface¶: Reset the boot interface to its hardware type default

--console-interface <console_interface>¶: Set the console interface for the node

--reset-console-interface¶: Reset the console interface to its hardware type default

--deploy-interface <deploy_interface>¶: Set the deploy interface for the node

--reset-deploy-interface¶: Reset the deploy interface to its hardware type default

--inspect-interface <inspect_interface>¶: Set the inspect interface for the node

--reset-inspect-interface¶: Reset the inspect interface to its hardware type default

--management-interface <management_interface>¶: Set the management interface for the node

--reset-management-interface¶: Reset the management interface to its hardware type default

--network-interface <network_interface>¶: Set the network interface for the node

--reset-network-interface¶: Reset the network interface to its hardware type default

--network-data <network data>¶: JSON string or a file or ‘-‘ for stdin to read static network configuration for the baremetal node associated with this ironic node. Format of this file should comply with Nova network data metadata (network_data.json). Depending on ironic boot interface capabilities being used, network configuration may or may not been served to the node for offline network configuration.

--power-interface <power_interface>¶: Set the power interface for the node

--reset-power-interface¶: Reset the power interface to its hardware type default

--raid-interface <raid_interface>¶: Set the RAID interface for the node

--reset-raid-interface¶: Reset the RAID interface to its hardware type default

--rescue-interface <rescue_interface>¶: Set the rescue interface for the node

--reset-rescue-interface¶: Reset the rescue interface to its hardware type default

--storage-interface <storage_interface>¶: Set the storage interface for the node

--reset-storage-interface¶: Reset the storage interface to its hardware type default

--vendor-interface <vendor_interface>¶: Set the vendor interface for the node

--reset-vendor-interface¶: Reset the vendor interface to its hardware type default

--reset-interfaces¶: Reset all interfaces not specified explicitly to their default implementations. Only valid with –driver.

--resource-class <resource_class>¶: Set the resource class for the node

--conductor-group <conductor_group>¶: Set the conductor group for the node

--automated-clean¶: Enable automated cleaning for the node

--protected¶: Mark the node as protected

--protected-reason <protected_reason>¶: Set the reason of marking the node as protected

--retired¶: Mark the node as retired

--retired-reason <retired_reason>¶: Set the reason of marking the node as retired

--target-raid-config <target_raid_config>¶: Set the target RAID configuration (JSON) for the node. This can be one of: 1. a file containing JSON data of the RAID configuration; 2. “-” to read the contents from standard input; or 3. a valid JSON string.

--property <key=value>¶: Property to set on this baremetal node (repeat option to set multiple properties)

--extra <key=value>¶: Extra to set on this baremetal node (repeat option to set multiple extras)

--driver-info <key=value>¶: Driver information to set on this baremetal node (repeat option to set multiple driver infos)

--instance-info <key=value>¶: Instance information to set on this baremetal node (repeat option to set multiple instance infos)

--owner <owner>¶: Set the owner for the node

--lessee <lessee>¶: Set the lessee for the node

--description <description>¶: Set the description for the node

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node show¶

Show baremetal node details

openstack baremetal node show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--instance]
    [--fields <field> [<field> ...]]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--instance¶: <node> is an instance UUID.

--fields <field>¶: One or more node fields. Only these fields will be fetched from the server.

node¶: Name or UUID of the node (or instance UUID if –instance is specified)

This command is provided by the python-ironicclient plugin.

baremetal node trait list¶

List a node’s traits.

openstack baremetal node trait list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node undeploy¶

Set provision state of baremetal node to ‘deleted’

openstack baremetal node undeploy [--wait [<time-out>]] <node>

--wait <time-out>¶: Wait for a node to reach the desired state, available. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node unrescue¶

Set provision state of baremetal node to ‘unrescue’

openstack baremetal node unrescue [--wait [<time-out>]] <node>

--wait <time-out>¶: Wait for a node to reach the desired state, active. Optionally takes a timeout value (in seconds). The default value is 0, meaning it will wait indefinitely.

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node unset¶

Unset baremetal properties

openstack baremetal node unset
    [--instance-uuid]
    [--name]
    [--resource-class]
    [--target-raid-config]
    [--property <key>]
    [--extra <key>]
    [--driver-info <key>]
    [--instance-info <key>]
    [--chassis-uuid]
    [--bios-interface]
    [--boot-interface]
    [--console-interface]
    [--deploy-interface]
    [--inspect-interface]
    [--network-data]
    [--management-interface]
    [--network-interface]
    [--power-interface]
    [--raid-interface]
    [--rescue-interface]
    [--storage-interface]
    [--vendor-interface]
    [--conductor-group]
    [--automated-clean]
    [--protected]
    [--protected-reason]
    [--retired]
    [--retired-reason]
    [--owner]
    [--lessee]
    [--description]
    <node>

--instance-uuid¶: Unset instance UUID on this baremetal node

--name¶: Unset the name of the node

--resource-class¶: Unset the resource class of the node

--target-raid-config¶: Unset the target RAID configuration of the node

--property <key>¶: Property to unset on this baremetal node (repeat option to unset multiple properties)

--extra <key>¶: Extra to unset on this baremetal node (repeat option to unset multiple extras)

--driver-info <key>¶: Driver information to unset on this baremetal node (repeat option to unset multiple driver informations)

--instance-info <key>¶: Instance information to unset on this baremetal node (repeat option to unset multiple instance informations)

--chassis-uuid¶: Unset chassis UUID on this baremetal node

--bios-interface¶: Unset BIOS interface on this baremetal node

--boot-interface¶: Unset boot interface on this baremetal node

--console-interface¶: Unset console interface on this baremetal node

--deploy-interface¶: Unset deploy interface on this baremetal node

--inspect-interface¶: Unset inspect interface on this baremetal node

--network-data¶: Unset network data on this baremetal port.

--management-interface¶: Unset management interface on this baremetal node

--network-interface¶: Unset network interface on this baremetal node

--power-interface¶: Unset power interface on this baremetal node

--raid-interface¶: Unset RAID interface on this baremetal node

--rescue-interface¶: Unset rescue interface on this baremetal node

--storage-interface¶: Unset storage interface on this baremetal node

--vendor-interface¶: Unset vendor interface on this baremetal node

--conductor-group¶: Unset conductor group for this baremetal node (the default group will be used)

--automated-clean¶: Unset automated clean option on this baremetal node (the value from configuration will be used)

--protected¶: Unset the protected flag on the node

--protected-reason¶: Unset the protected reason (gets unset automatically when protected is unset)

--retired¶: Unset the retired flag on the node

--retired-reason¶: Unset the retired reason (gets unset automatically when retired is unset)

--owner¶: Unset the owner field of the node

--lessee¶: Unset the lessee field of the node

--description¶: Unset the description field of the node

node¶: Name or UUID of the node.

This command is provided by the python-ironicclient plugin.

baremetal node validate¶

Validate a node’s driver interfaces

openstack baremetal node validate
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal node vif attach¶

Attach VIF to a given node

openstack baremetal node vif attach
    [--port-uuid <port-uuid>]
    [--vif-info <key=value>]
    <node>
    <vif-id>

--port-uuid <port-uuid>¶: UUID of the baremetal port to attach the VIF to.

--vif-info <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times. The mandatory ‘id’ parameter cannot be specified as a key.

node¶: Name or UUID of the node

vif-id¶: Name or UUID of the VIF to attach to a node.

This command is provided by the python-ironicclient plugin.

baremetal node vif detach¶

Detach VIF from a given node

openstack baremetal node vif detach <node> <vif-id>

node¶: Name or UUID of the node

vif-id¶: Name or UUID of the VIF to detach from a node.

This command is provided by the python-ironicclient plugin.

baremetal node vif list¶

Show attached VIFs for a node

openstack baremetal node vif list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    <node>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

node¶: Name or UUID of the node

This command is provided by the python-ironicclient plugin.

baremetal port¶

baremetal port create¶

Create a new port

openstack baremetal port create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    --node <uuid>
    [--uuid <uuid>]
    [--extra <key=value>]
    [--local-link-connection <key=value>]
    [-l <key=value>]
    [--pxe-enabled <boolean>]
    [--port-group <uuid>]
    [--physical-network <physical network>]
    [--is-smartnic]
    <address>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--node <uuid>¶: UUID of the node that this port belongs to.

--uuid <uuid>¶: UUID of the port.

--extra <key=value>¶: Record arbitrary key/value metadata. Argument can be specified multiple times.

--local-link-connection <key=value>¶: Key/value metadata describing Local link connection information. Valid keys are ‘switch_info’, ‘switch_id’, ‘port_id’ and ‘hostname’. The keys ‘switch_id’ and ‘port_id’ are required. In case of a Smart NIC port, the required keys are ‘port_id’ and ‘hostname’. Argument can be specified multiple times.

-l <key=value>¶: DEPRECATED. Please use –local-link-connection instead. Key/value metadata describing Local link connection information. Valid keys are ‘switch_info’, ‘switch_id’, and ‘port_id’. The keys ‘switch_id’ and ‘port_id’ are required. Can be specified multiple times.

--pxe-enabled <boolean>¶: Indicates whether this Port should be used when PXE booting this Node.

--port-group <uuid>¶: UUID of the port group that this port belongs to.

--physical-network <physical network>¶: Name of the physical network to which this port is connected.

--is-smartnic¶: Indicates whether this Port is a Smart NIC port

address¶: MAC address for this port.

This command is provided by the python-ironicclient plugin.

baremetal port delete¶

Delete port(s).

openstack baremetal port delete <port> [<port> ...]

port¶: UUID(s) of the port(s) to delete.

This command is provided by the python-ironicclient plugin.

baremetal port group create¶

Create a new baremetal port group.

openstack baremetal port group create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    --node <uuid>
    [--address <mac-address>]
    [--name NAME]
    [--uuid UUID]
    [--extra <key=value>]
    [--mode MODE]
    [--property <key=value>]
    [--support-standalone-ports | --unsupport-standalone-ports]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--node <uuid>¶: UUID of the node that this port group belongs to.

--address <mac-address>¶: MAC address for this port group.

--name <NAME>¶: Name of the port group.

--uuid <UUID>¶: UUID of the port group.

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

--mode <MODE>¶: Mode of the port group. For possible values, refer to https://www.kernel.org/doc/Documentation/networking/bonding.txt.

--property <key=value>¶: Key/value property related to this port group’s configuration. Can be specified multiple times.

--support-standalone-ports¶: Ports that are members of this port group can be used as stand-alone ports. (default)

--unsupport-standalone-ports¶: Ports that are members of this port group cannot be used as stand-alone ports.

This command is provided by the python-ironicclient plugin.

baremetal port group delete¶

Unregister baremetal port group(s).

openstack baremetal port group delete <port group> [<port group> ...]

port group¶: Port group(s) to delete (name or UUID).

This command is provided by the python-ironicclient plugin.

baremetal port group list¶

List baremetal port groups.

openstack baremetal port group list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--limit <limit>]
    [--marker <port group>]
    [--sort <key>[:<direction>]]
    [--address <mac-address>]
    [--node <node>]
    [--long | --fields <field> [<field> ...]]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--limit <limit>¶: Maximum number of port groups to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service.

--marker <port group>¶: Port group UUID (for example, of the last port group in the list from a previous request). Returns the list of port groups after this UUID.

--sort <key>[:<direction>]¶: Sort output by specified port group fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma.

--address <mac-address>¶: Only show information for the port group with this MAC address.

--node <node>¶: Only list port groups of this node (name or UUID).

--long¶: Show detailed information about the port groups.

--fields <field>¶: One or more port group fields. Only these fields will be fetched from the server. Can not be used when ‘–long’ is specified.

This command is provided by the python-ironicclient plugin.

baremetal port group set¶

Set baremetal port group properties.

openstack baremetal port group set
    [--node <uuid>]
    [--address <mac-address>]
    [--name <name>]
    [--extra <key=value>]
    [--mode MODE]
    [--property <key=value>]
    [--support-standalone-ports | --unsupport-standalone-ports]
    <port
    group>

--node <uuid>¶: Update UUID of the node that this port group belongs to.

--address <mac-address>¶: MAC address for this port group.

--name <name>¶: Name of the port group.

--extra <key=value>¶: Extra to set on this baremetal port group (repeat option to set multiple extras).

--mode <MODE>¶: Mode of the port group. For possible values, refer to https://www.kernel.org/doc/Documentation/networking/bonding.txt.

--property <key=value>¶: Key/value property related to this port group’s configuration (repeat option to set multiple properties).

--support-standalone-ports¶: Ports that are members of this port group can be used as stand-alone ports.

--unsupport-standalone-ports¶: Ports that are members of this port group cannot be used as stand-alone ports.

port group¶: Name or UUID of the port group.

This command is provided by the python-ironicclient plugin.

baremetal port group show¶

Show baremetal port group details.

openstack baremetal port group show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--address]
    [--fields <field> [<field> ...]]
    <id>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--address¶: <id> is the MAC address (instead of UUID or name) of the port group.

--fields <field>¶: One or more port group fields. Only these fields will be fetched from the server.

id¶: UUID or name of the port group (or MAC address if –address is specified).

This command is provided by the python-ironicclient plugin.

baremetal port group unset¶

Unset baremetal port group properties.

openstack baremetal port group unset
    [--name]
    [--address]
    [--extra <key>]
    [--property <key>]
    <port
    group>

--name¶: Unset the name of the port group.

--address¶: Unset the address of the port group.

--extra <key>¶: Extra to unset on this baremetal port group (repeat option to unset multiple extras).

--property <key>¶: Property to unset on this baremetal port group (repeat option to unset multiple properties).

port group¶: Name or UUID of the port group.

This command is provided by the python-ironicclient plugin.

baremetal port list¶

List baremetal ports.

openstack baremetal port list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--address <mac-address>]
    [--node <node>]
    [--port-group <port group>]
    [--limit <limit>]
    [--marker <port>]
    [--sort <key>[:<direction>]]
    [--long | --fields <field> [<field> ...]]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--address <mac-address>¶: Only show information for the port with this MAC address.

--node <node>¶: Only list ports of this node (name or UUID).

--port-group <port group>¶: Only list ports of this port group (name or UUID).

--limit <limit>¶: Maximum number of ports to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service.

--marker <port>¶: Port UUID (for example, of the last port in the list from a previous request). Returns the list of ports after this UUID.

--sort <key>[:<direction>]¶: Sort output by specified port fields and directions (asc or desc) (default: asc). Multiple fields and directions can be specified, separated by comma.

--long¶: Show detailed information about ports.

--fields <field>¶: One or more port fields. Only these fields will be fetched from the server. Can not be used when ‘–long’ is specified.

This command is provided by the python-ironicclient plugin.

baremetal port set¶

Set baremetal port properties.

openstack baremetal port set
    [--node <uuid>]
    [--address <address>]
    [--extra <key=value>]
    [--port-group <uuid>]
    [--local-link-connection <key=value>]
    [--pxe-enabled | --pxe-disabled]
    [--physical-network <physical network>]
    [--is-smartnic]
    <port>

--node <uuid>¶: Set UUID of the node that this port belongs to

--address <address>¶: Set MAC address for this port

--extra <key=value>¶: Extra to set on this baremetal port (repeat option to set multiple extras)

--port-group <uuid>¶: Set UUID of the port group that this port belongs to.

--local-link-connection <key=value>¶: Key/value metadata describing local link connection information. Valid keys are ‘switch_info’, ‘switch_id’, ‘port_id’ and ‘hostname’. The keys ‘switch_id’ and ‘port_id’ are required. In case of a Smart NIC port, the required keys are ‘port_id’ and ‘hostname’. Argument can be specified multiple times.

--pxe-enabled¶: Indicates that this port should be used when PXE booting this node (default)

--pxe-disabled¶: Indicates that this port should not be used when PXE booting this node

--physical-network <physical network>¶: Set the name of the physical network to which this port is connected.

--is-smartnic¶: Set port to be Smart NIC port

port¶: UUID of the port

This command is provided by the python-ironicclient plugin.

baremetal port show¶

Show baremetal port details.

openstack baremetal port show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--address]
    [--fields <field> [<field> ...]]
    <id>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--address¶: <id> is the MAC address (instead of the UUID) of the port.

--fields <field>¶: One or more port fields. Only these fields will be fetched from the server.

id¶: UUID of the port (or MAC address if –address is specified).

This command is provided by the python-ironicclient plugin.

baremetal port unset¶

Unset baremetal port properties.

openstack baremetal port unset
    [--extra <key>]
    [--port-group]
    [--physical-network]
    [--is-smartnic]
    <port>

--extra <key>¶: Extra to unset on this baremetal port (repeat option to unset multiple extras)

--port-group¶: Remove port from the port group

--physical-network¶: Unset the physical network on this baremetal port.

--is-smartnic¶: Set Port as not Smart NIC port

port¶: UUID of the port.

This command is provided by the python-ironicclient plugin.

baremetal volume¶

baremetal volume connector create¶

Create a new baremetal volume connector.

openstack baremetal volume connector create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    --node <uuid>
    --type <type>
    --connector-id <connector
    id>
    [--uuid <uuid>]
    [--extra <key=value>]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--node <uuid>¶: UUID of the node that this volume connector belongs to.

--type <type>¶: Type of the volume connector. Can be ‘iqn’, ‘ip’, ‘mac’, ‘wwnn’, ‘wwpn’, ‘port’, ‘portgroup’.

--connector-id <connector id>¶: ID of the volume connector in the specified type. For example, the iSCSI initiator IQN for the node if the type is ‘iqn’.

--uuid <uuid>¶: UUID of the volume connector.

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

This command is provided by the python-ironicclient plugin.

baremetal volume connector delete¶

Unregister baremetal volume connector(s).

openstack baremetal volume connector delete
    <volume
    connector>
    [<volume connector> ...]

volume connector¶: UUID(s) of the volume connector(s) to delete.

This command is provided by the python-ironicclient plugin.

baremetal volume connector list¶

List baremetal volume connectors.

openstack baremetal volume connector list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--node <node>]
    [--limit <limit>]
    [--marker <volume connector>]
    [--sort <key>[:<direction>]]
    [--long | --fields <field> [<field> ...]]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--node <node>¶: Only list volume connectors of this node (name or UUID).

--limit <limit>¶: Maximum number of volume connectors to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service.

--marker <volume connector>¶: Volume connector UUID (for example, of the last volume connector in the list from a previous request). Returns the list of volume connectors after this UUID.

--sort <key>[:<direction>]¶: Sort output by specified volume connector fields and directions (asc or desc) (default:asc). Multiple fields and directions can be specified, separated by comma.

--long¶: Show detailed information about volume connectors.

--fields <field>¶: One or more volume connector fields. Only these fields will be fetched from the server. Can not be used when ‘–long’ is specified.

This command is provided by the python-ironicclient plugin.

baremetal volume connector set¶

Set baremetal volume connector properties.

openstack baremetal volume connector set
    [--node <uuid>]
    [--type <type>]
    [--connector-id <connector id>]
    [--extra <key=value>]
    <volume
    connector>

--node <uuid>¶: UUID of the node that this volume connector belongs to.

--type <type>¶: Type of the volume connector. Can be ‘iqn’, ‘ip’, ‘mac’, ‘wwnn’, ‘wwpn’, ‘port’, ‘portgroup’.

--connector-id <connector id>¶: ID of the volume connector in the specified type.

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

volume connector¶: UUID of the volume connector.

This command is provided by the python-ironicclient plugin.

baremetal volume connector show¶

Show baremetal volume connector details.

openstack baremetal volume connector show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--fields <field> [<field> ...]]
    <id>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--fields <field>¶: One or more volume connector fields. Only these fields will be fetched from the server.

id¶: UUID of the volume connector.

This command is provided by the python-ironicclient plugin.

baremetal volume connector unset¶

Unset baremetal volume connector properties.

openstack baremetal volume connector unset
    [--extra <key>]
    <volume
    connector>

--extra <key>¶: Extra to unset (repeat option to unset multiple extras)

volume connector¶: UUID of the volume connector.

This command is provided by the python-ironicclient plugin.

baremetal volume target create¶

Create a new baremetal volume target.

openstack baremetal volume target create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    --node <uuid>
    --type <volume
    type>
    [--property <key=value>]
    --boot-index <boot
    index>
    --volume-id <volume
    id>
    [--uuid <uuid>]
    [--extra <key=value>]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--node <uuid>¶: UUID of the node that this volume target belongs to.

--type <volume type>¶: Type of the volume target, e.g. ‘iscsi’, ‘fibre_channel’.

--property <key=value>¶: Key/value property related to the type of this volume target. Can be specified multiple times.

--boot-index <boot index>¶: Boot index of the volume target.

--volume-id <volume id>¶: ID of the volume associated with this target.

--uuid <uuid>¶: UUID of the volume target.

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

This command is provided by the python-ironicclient plugin.

baremetal volume target delete¶

Unregister baremetal volume target(s).

openstack baremetal volume target delete
    <volume
    target>
    [<volume target> ...]

volume target¶: UUID(s) of the volume target(s) to delete.

This command is provided by the python-ironicclient plugin.

baremetal volume target list¶

List baremetal volume targets.

openstack baremetal volume target list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--node <node>]
    [--limit <limit>]
    [--marker <volume target>]
    [--sort <key>[:<direction>]]
    [--long | --fields <field> [<field> ...]]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--node <node>¶: Only list volume targets of this node (name or UUID).

--limit <limit>¶: Maximum number of volume targets to return per request, 0 for no limit. Default is the maximum number used by the Baremetal API Service.

--marker <volume target>¶: Volume target UUID (for example, of the last volume target in the list from a previous request). Returns the list of volume targets after this UUID.

--sort <key>[:<direction>]¶: Sort output by specified volume target fields and directions (asc or desc) (default:asc). Multiple fields and directions can be specified, separated by comma.

--long¶: Show detailed information about volume targets.

--fields <field>¶: One or more volume target fields. Only these fields will be fetched from the server. Can not be used when ‘–long’ is specified.

This command is provided by the python-ironicclient plugin.

baremetal volume target set¶

Set baremetal volume target properties.

openstack baremetal volume target set
    [--node <uuid>]
    [--type <volume type>]
    [--property <key=value>]
    [--boot-index <boot index>]
    [--volume-id <volume id>]
    [--extra <key=value>]
    <volume
    target>

--node <uuid>¶: UUID of the node that this volume target belongs to.

--type <volume type>¶: Type of the volume target, e.g. ‘iscsi’, ‘fibre_channel’.

--property <key=value>¶: Key/value property related to the type of this volume target. Can be specified multiple times.

--boot-index <boot index>¶: Boot index of the volume target.

--volume-id <volume id>¶: ID of the volume associated with this target.

--extra <key=value>¶: Record arbitrary key/value metadata. Can be specified multiple times.

volume target¶: UUID of the volume target.

This command is provided by the python-ironicclient plugin.

baremetal volume target show¶

Show baremetal volume target details.

openstack baremetal volume target show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--fields <field> [<field> ...]]
    <id>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--fields <field>¶: One or more volume target fields. Only these fields will be fetched from the server.

id¶: UUID of the volume target.

This command is provided by the python-ironicclient plugin.

baremetal volume target unset¶

Unset baremetal volume target properties.

openstack baremetal volume target unset
    [--extra <key>]
    [--property <key>]
    <volume
    target>

--extra <key>¶: Extra to unset (repeat option to unset multiple extras)

--property <key>¶: Property to unset on this baremetal volume target (repeat option to unset multiple properties).

volume target¶: UUID of the volume target.

This command is provided by the python-ironicclient plugin.