bgpvpn¶

A bgpvpn resource contains a set of parameters to define a BGP-based VPN. BGP-based IP VPNs networks are widely used in the industry especially for enterprises. The networking BGP VPN project aims at supporting inter-connection between L3VPNs and Neutron resources, i.e. Networks, Routers and Ports.

Network v2

bgpvpn create¶

Create BGP VPN resource

openstack bgpvpn create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    [--name <name>]
    [--route-target <route-target>]
    [--import-target <import-target>]
    [--export-target <export-target>]
    [--route-distinguisher <route-distinguisher>]
    [--vni VNI]
    [--local-pref LOCAL_PREF]
    [--type {l2,l3}]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--project <project>¶: Owner’s project (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--name <name>¶: Name of the BGP VPN

--route-target <route-target>¶: Add Route Target to import/export list (repeat option for multiple Route Targets)

--import-target <import-target>¶: Add Route Target to import list (repeat option for multiple Route Targets)

--export-target <export-target>¶: Add Route Target to export list (repeat option for multiple Route Targets)

--route-distinguisher <route-distinguisher>¶: Add Route Distinguisher to the list of Route Distinguishers from which a Route Distinguishers will be picked from to advertise a VPN route (repeat option for multiple Route Distinguishers)

--vni <VNI>¶: VXLAN Network Identifier to be used for this BGPVPN when a VXLAN encapsulation is used

--local-pref <LOCAL_PREF>¶: Default BGP LOCAL_PREF to use in route advertisementstowards this BGPVPN.

--type <TYPE>¶: BGP VPN type selection between IP VPN (l3) and Ethernet VPN (l2) (default: l3)

This command is provided by the python-neutronclient plugin.

bgpvpn delete¶

Delete BGP VPN resource(s)

openstack bgpvpn delete <bgpvpn> [<bgpvpn> ...]

bgpvpn¶: BGP VPN(s) to delete (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn list¶

List BGP VPN resources

openstack bgpvpn list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--project <project>]
    [--project-domain <project-domain>]
    [--long]
    [--property <key=value>]

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending¶: sort the column(s) in ascending order

--sort-descending¶: sort the column(s) in descending order

--project <project>¶: Owner’s project (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--long¶: List additional fields in output

--property <key=value>¶: Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

This command is provided by the python-neutronclient plugin.

bgpvpn set¶

Set BGP VPN properties

openstack bgpvpn set
    [--name <name>]
    [--route-target <route-target>]
    [--no-route-target]
    [--import-target <import-target>]
    [--no-import-target]
    [--export-target <export-target>]
    [--no-export-target]
    [--route-distinguisher <route-distinguisher>]
    [--no-route-distinguisher]
    [--vni VNI]
    [--local-pref LOCAL_PREF]
    <bgpvpn>

--name <name>¶: Name of the BGP VPN

--route-target <route-target>¶: Add Route Target to import/export list (repeat option for multiple Route Targets)

--no-route-target¶: Empty route target list

--import-target <import-target>¶: Add Route Target to import list (repeat option for multiple Route Targets)

--no-import-target¶: Empty import route target list

--export-target <export-target>¶: Add Route Target to export list (repeat option for multiple Route Targets)

--no-export-target¶: Empty export route target list

--route-distinguisher <route-distinguisher>¶: Add Route Distinguisher to the list of Route Distinguishers from which a Route Distinguishers will be picked from to advertise a VPN route (repeat option for multiple Route Distinguishers)

--no-route-distinguisher¶: Empty route distinguisher list

--vni <VNI>¶: VXLAN Network Identifier to be used for this BGPVPN when a VXLAN encapsulation is used

--local-pref <LOCAL_PREF>¶: Default BGP LOCAL_PREF to use in route advertisementstowards this BGPVPN.

bgpvpn¶: BGP VPN to update (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn show¶

Show information of a given BGP VPN

openstack bgpvpn show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <bgpvpn>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

bgpvpn¶: BGP VPN to display (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn unset¶

Unset BGP VPN properties

openstack bgpvpn unset
    [--route-target <route-target>]
    [--all-route-target]
    [--import-target <import-target>]
    [--all-import-target]
    [--export-target <export-target>]
    [--all-export-target]
    [--route-distinguisher <route-distinguisher>]
    [--all-route-distinguisher]
    [--vni VNI]
    [--local-pref LOCAL_PREF]
    <bgpvpn>

--route-target <route-target>¶: Remove Route Target from import/export list (repeat option for multiple Route Targets)

--all-route-target¶: Empty route target list

--import-target <import-target>¶: Remove Route Target from import list (repeat option for multiple Route Targets)

--all-import-target¶: Empty import route target list

--export-target <export-target>¶: Remove Route Target from export list (repeat option for multiple Route Targets)

--all-export-target¶: Empty export route target list

--route-distinguisher <route-distinguisher>¶: Remove Route Distinguisher from the list of Route Distinguishers from which a Route Distinguishers will be picked from to advertise a VPN route (repeat option for multiple Route Distinguishers)

--all-route-distinguisher¶: Empty route distinguisher list

--vni <VNI>¶: VXLAN Network Identifier to be used for this BGPVPN when a VXLAN encapsulation is used

--local-pref <LOCAL_PREF>¶: Default BGP LOCAL_PREF to use in route advertisementstowards this BGPVPN.

bgpvpn¶: BGP VPN to update (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association create¶

Create a BGP VPN network association

openstack bgpvpn network association create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    <bgpvpn>
    <network>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--project <project>¶: Owner’s project (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

bgpvpn¶: BGP VPN to apply the network association (name or ID)

network¶: Network to associate the BGP VPN (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association delete¶

Delete a BGP VPN network association(s) for a given BGP VPN

openstack bgpvpn network association delete
    <network
    association
    ID>
    [<network association ID> ...]
    <bgpvpn>

network association ID¶: Network association ID(s) to remove

bgpvpn¶: BGP VPN the network association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association list¶

List BGP VPN network associations for a given BGP VPN

openstack bgpvpn network association list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--long]
    [--property <key=value>]
    <bgpvpn>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending¶: sort the column(s) in ascending order

--sort-descending¶: sort the column(s) in descending order

--long¶: List additional fields in output

--property <key=value>¶: Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

bgpvpn¶: BGP VPN listed associations belong to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn network association show¶

Show information of a given BGP VPN network association

openstack bgpvpn network association show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <network
    association
    ID>
    <bgpvpn>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

network association ID¶: Network association ID to look up

bgpvpn¶: BGP VPN the association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association create¶

Create a BGP VPN router association

openstack bgpvpn router association create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    [--advertise_extra_routes | --no-advertise_extra_routes]
    <bgpvpn>
    <router>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--project <project>¶: Owner’s project (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--advertise_extra_routes¶: Routes will be advertised to the BGP VPN (default)

--no-advertise_extra_routes¶: Routes from the router will not be advertised to the BGP VPN

bgpvpn¶: BGP VPN to apply the router association (name or ID)

router¶: Router to associate the BGP VPN (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association delete¶

Delete a BGP VPN router association(s) for a given BGP VPN

openstack bgpvpn router association delete
    <router
    association
    ID>
    [<router association ID> ...]
    <bgpvpn>

router association ID¶: Router association ID(s) to remove

bgpvpn¶: BGP VPN the router association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association list¶

List BGP VPN router associations for a given BGP VPN

openstack bgpvpn router association list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--long]
    [--property <key=value>]
    <bgpvpn>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending¶: sort the column(s) in ascending order

--sort-descending¶: sort the column(s) in descending order

--long¶: List additional fields in output

--property <key=value>¶: Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

bgpvpn¶: BGP VPN listed associations belong to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association set¶

Set BGP VPN router association properties

openstack bgpvpn router association set
    [--advertise_extra_routes | --no-advertise_extra_routes]
    <router
    association
    ID>
    <bgpvpn>

--advertise_extra_routes¶: Routes will be advertised to the BGP VPN

--no-advertise_extra_routes¶: Routes from the router will not be advertised to the BGP VPN

router association ID¶: Router association ID to update

bgpvpn¶: BGP VPN the router association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association show¶

Show information of a given BGP VPN router association

openstack bgpvpn router association show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <router
    association
    ID>
    <bgpvpn>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

router association ID¶: Router association ID to look up

bgpvpn¶: BGP VPN the association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn router association unset¶

Unset BGP VPN router association properties

openstack bgpvpn router association unset
    [--advertise_extra_routes | --no-advertise_extra_routes]
    <router
    association
    ID>
    <bgpvpn>

--advertise_extra_routes¶: Routes from the router will not be advertised to the BGP VPN

--no-advertise_extra_routes¶: Routes will be advertised to the BGP VPN

router association ID¶: Router association ID to update

bgpvpn¶: BGP VPN the router association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association create¶

Create a BGP VPN port association

openstack bgpvpn port association create
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--project <project>]
    [--project-domain <project-domain>]
    [--advertise-fixed-ips | --no-advertise-fixed-ips]
    [--prefix-route prefix=<cidr>[,local_pref=<integer>]]
    [--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]]
    <bgpvpn>
    <port>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--project <project>¶: Owner’s project (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--advertise-fixed-ips¶: Fixed IPs of the port will be advertised to the BGP VPN (default)

--no-advertise-fixed-ips¶: Fixed IPs of the port will not be advertised to the BGP VPN

--prefix-route prefix=<cidr>[,local_pref=<integer>]¶: Add prefix route in CIDR notation. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple prefix routes)

--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]¶: Add BGP VPN route for route leaking. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple BGP VPN routes)

bgpvpn¶: BGP VPN to apply the port association (name or ID)

port¶: Port to associate the BGP VPN (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association delete¶

Delete a BGP VPN port association(s) for a given BGP VPN

openstack bgpvpn port association delete
    <port
    association
    ID>
    [<port association ID> ...]
    <bgpvpn>

port association ID¶: Port association ID(s) to remove

bgpvpn¶: BGP VPN the port association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association list¶

List BGP VPN port associations for a given BGP VPN

openstack bgpvpn port association list
    [-f {csv,json,table,value,yaml}]
    [-c COLUMN]
    [--quote {all,minimal,none,nonnumeric}]
    [--noindent]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--long]
    [--property <key=value>]
    <bgpvpn>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--quote <QUOTE_MODE>¶: when to include quotes, defaults to nonnumeric

--noindent¶: whether to disable indenting the JSON

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending¶: sort the column(s) in ascending order

--sort-descending¶: sort the column(s) in descending order

--long¶: List additional fields in output

--property <key=value>¶: Filter property to apply on returned BGP VPNs (repeat to filter on multiple properties)

bgpvpn¶: BGP VPN listed associations belong to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association set¶

Set BGP VPN port association properties

openstack bgpvpn port association set
    [--advertise-fixed-ips | --no-advertise-fixed-ips]
    [--prefix-route prefix=<cidr>[,local_pref=<integer>]]
    [--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]]
    [--no-prefix-route]
    [--no-bgpvpn-route]
    <port
    association
    ID>
    <bgpvpn>

--advertise-fixed-ips¶: Fixed IPs of the port will be advertised to the BGP VPN

--no-advertise-fixed-ips¶: Fixed IPs of the port will not be advertised to the BGP VPN

--prefix-route prefix=<cidr>[,local_pref=<integer>]¶: Add prefix route in CIDR notation. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple prefix routes)

--bgpvpn-route bgpvpn=<BGP VPN ID or name>[,local_pref=<integer>]¶: Add BGP VPN route for route leaking. Optionally, can control the value of the BGP LOCAL_PREF of the routes that will be advertised (repeat option for multiple BGP VPN routes)

--no-prefix-route¶: Empty prefix route list

--no-bgpvpn-route¶: Empty BGP VPN route list

port association ID¶: Port association ID to update

bgpvpn¶: BGP VPN the port association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association show¶

Show information of a given BGP VPN port association

openstack bgpvpn port association show
    [-f {json,shell,table,value,yaml}]
    [-c COLUMN]
    [--noindent]
    [--prefix PREFIX]
    [--max-width <integer>]
    [--fit-width]
    [--print-empty]
    <port
    association
    ID>
    <bgpvpn>

-f <FORMATTER>, --format <FORMATTER>¶: the output format, defaults to table

-c COLUMN, --column COLUMN¶: specify the column(s) to include, can be repeated to show multiple columns

--noindent¶: whether to disable indenting the JSON

--prefix <PREFIX>¶: add a prefix to all variable names

--max-width <integer>¶: Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width¶: Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty¶: Print empty table if there is no data to show.

port association ID¶: Port association ID to look up

bgpvpn¶: BGP VPN the association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn port association unset¶

Unset BGP VPN port association properties

openstack bgpvpn port association unset
    [--advertise-fixed-ips | --no-advertise-fixed-ips]
    [--prefix-route <cidr>]
    [--bgpvpn-route <BGP VPN ID or name>]
    [--all-prefix-routes]
    [--all-bgpvpn-routes]
    <port
    association
    ID>
    <bgpvpn>

--advertise-fixed-ips¶: Fixed IPs of the port will not be advertised to the BGP VPN

--no-advertise-fixed-ips¶: Fixed IPs of the port will be advertised to the BGP VPN

--prefix-route <cidr>¶: Remove prefix route in CIDR notation (repeat option for multiple prefix routes)

--bgpvpn-route <BGP VPN ID or name>¶: Remove BGP VPN route (repeat option for multiple BGP VPN routes)

--all-prefix-routes¶: Empty prefix route list

--all-bgpvpn-routes¶: Empty BGP VPN route list

port association ID¶: Port association ID to update

bgpvpn¶: BGP VPN the port association belongs to (name or ID)

This command is provided by the python-neutronclient plugin.

bgpvpn

bgpvpn¶

bgpvpn create¶

bgpvpn delete¶

bgpvpn list¶

bgpvpn set¶

bgpvpn show¶

bgpvpn unset¶

bgpvpn network association create¶

bgpvpn network association delete¶

bgpvpn network association list¶

bgpvpn network association show¶

bgpvpn router association create¶

bgpvpn router association delete¶

bgpvpn router association list¶

bgpvpn router association set¶

bgpvpn router association show¶

bgpvpn router association unset¶

bgpvpn port association create¶

bgpvpn port association delete¶

bgpvpn port association list¶

bgpvpn port association set¶

bgpvpn port association show¶

bgpvpn port association unset¶

python-neutronclient 11.3.2.dev2

Page Contents