subnet¶

A subnet is a block of IP addresses and associated configuration state. Subnets are used to allocate IP addresses when new ports are created on a network.

Network v2

subnet create¶

Create a subnet

openstack subnet create
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--project <project>]
    [--project-domain <project-domain>]
    [--subnet-pool <subnet-pool> | --use-prefix-delegation | --use-default-subnet-pool]
    [--prefix-length <prefix-length>]
    [--subnet-range <subnet-range>]
    [--dhcp | --no-dhcp]
    [--dns-publish-fixed-ip | --no-dns-publish-fixed-ip]
    [--gateway <gateway>]
    [--ip-version {4,6}]
    [--ipv6-ra-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}]
    [--ipv6-address-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}]
    [--network-segment <network-segment>]
    --network <network>
    [--description <description>]
    [--allocation-pool start=<ip-address>,end=<ip-address>]
    [--dns-nameserver <dns-nameserver>]
    [--host-route destination=<subnet>,gateway=<ip-address>]
    [--service-type <service-type>]
    [--tag <tag> | --no-tag]
    <name>

--extra-property type=<property_type>,name=<property_name>,value=<property_value>¶: Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

--project <project>¶: Owner’s project (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--subnet-pool <subnet-pool>¶: Subnet pool from which this subnet will obtain a CIDR (Name or ID)

--use-prefix-delegation¶: Use ‘prefix-delegation’ if IP is IPv6 format and IP would be delegated externally

--use-default-subnet-pool¶: Use default subnet pool for –ip-version

--prefix-length <prefix-length>¶: Prefix length for subnet allocation from subnet pool

--subnet-range <subnet-range>¶: Subnet range in CIDR notation (required if –subnet-pool is not specified, optional otherwise)

--dhcp¶: Enable DHCP (default)

--no-dhcp¶: Disable DHCP

--dns-publish-fixed-ip¶: Enable publishing fixed IPs in DNS

--no-dns-publish-fixed-ip¶: Disable publishing fixed IPs in DNS (default)

--gateway <gateway>¶: Specify a gateway for the subnet. The three options are: <ip-address>: Specific IP address to use as the gateway, ‘auto’: Gateway address should automatically be chosen from within the subnet itself, ‘none’: This subnet will not use a gateway, e.g.: –gateway 192.168.9.1, –gateway auto, –gateway none (default is ‘auto’).

--ip-version <IP_VERSION>¶: IP version (default is 4). Note that when subnet pool is specified, IP version is determined from the subnet pool and this option is ignored.

--ipv6-ra-mode <IPV6_RA_MODE>¶: IPv6 RA (Router Advertisement) mode, valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac]

--ipv6-address-mode <IPV6_ADDRESS_MODE>¶: IPv6 address mode, valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac]

--network-segment <network-segment>¶: Network segment to associate with this subnet (name or ID)

--network <network>¶: Network this subnet belongs to (name or ID)

--description <description>¶: Set subnet description

--allocation-pool start=<ip-address>,end=<ip-address>¶: Allocation pool IP addresses for this subnet e.g.: start=192.168.199.2,end=192.168.199.254 (repeat option to add multiple IP addresses)

--dns-nameserver <dns-nameserver>¶: DNS server for this subnet (repeat option to set multiple DNS servers)

--host-route destination=<subnet>,gateway=<ip-address>¶: Additional route for this subnet e.g.: destination=10.10.0.0/16,gateway=192.168.71.254 destination: destination subnet (in CIDR notation) gateway: nexthop IP address (repeat option to add multiple routes)

--service-type <service-type>¶: Service type for this subnet e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to set multiple service types)

--tag <tag>¶: Tag to be added to the subnet (repeat option to set multiple tags)

--no-tag¶: No tags associated with the subnet

name¶: New subnet name

subnet delete¶

Delete subnet(s)

openstack subnet delete <subnet> [<subnet> ...]

subnet¶: Subnet(s) to delete (name or ID)

subnet list¶

List subnets

openstack subnet list
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--long]
    [--ip-version <ip-version>]
    [--dhcp | --no-dhcp]
    [--service-type <service-type>]
    [--project <project>]
    [--project-domain <project-domain>]
    [--network <network>]
    [--gateway <gateway>]
    [--name <name>]
    [--subnet-range <subnet-range>]
    [--subnet-pool <subnet-pool>]
    [--tags <tag>[,<tag>,...]]
    [--any-tags <tag>[,<tag>,...]]
    [--not-tags <tag>[,<tag>,...]]
    [--not-any-tags <tag>[,<tag>,...]]

--sort-column SORT_COLUMN¶: specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending¶: sort the column(s) in ascending order

--sort-descending¶: sort the column(s) in descending order

--long¶: List additional fields in output

--ip-version <ip-version>¶: List only subnets of given IP version in output. Allowed values for IP version are 4 and 6.

--dhcp¶: List subnets which have DHCP enabled

--no-dhcp¶: List subnets which have DHCP disabled

--service-type <service-type>¶: List only subnets of a given service type in output e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to list multiple service types)

--project <project>¶: List only subnets which belong to a given project in output (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--network <network>¶: List only subnets which belong to a given network in output (name or ID)

--gateway <gateway>¶: List only subnets of given gateway IP in output

--name <name>¶: List only subnets of given name in output

--subnet-range <subnet-range>¶: List only subnets of given subnet range (in CIDR notation) in output e.g.: –subnet-range 10.10.0.0/16

--subnet-pool <subnet-pool>¶: List only subnets which belong to a given subnet pool in output (Name or ID)

--tags <tag>[,<tag>,...]¶: List subnets which have all given tag(s) (Comma-separated list of tags)

--any-tags <tag>[,<tag>,...]¶: List subnets which have any given tag(s) (Comma-separated list of tags)

--not-tags <tag>[,<tag>,...]¶: Exclude subnets which have all given tag(s) (Comma-separated list of tags)

--not-any-tags <tag>[,<tag>,...]¶: Exclude subnets which have any given tag(s) (Comma-separated list of tags)

subnet set¶

Set subnet properties

openstack subnet set
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--name <name>]
    [--dhcp | --no-dhcp]
    [--dns-publish-fixed-ip | --no-dns-publish-fixed-ip]
    [--gateway <gateway>]
    [--network-segment <network-segment>]
    [--description <description>]
    [--tag <tag>]
    [--no-tag]
    [--allocation-pool start=<ip-address>,end=<ip-address>]
    [--no-allocation-pool]
    [--dns-nameserver <dns-nameserver>]
    [--no-dns-nameservers]
    [--host-route destination=<subnet>,gateway=<ip-address>]
    [--no-host-route]
    [--service-type <service-type>]
    <subnet>

--extra-property type=<property_type>,name=<property_name>,value=<property_value>¶: Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

--name <name>¶: Updated name of the subnet

--dhcp¶: Enable DHCP

--no-dhcp¶: Disable DHCP

--dns-publish-fixed-ip¶: Enable publishing fixed IPs in DNS

--no-dns-publish-fixed-ip¶: Disable publishing fixed IPs in DNS

--gateway <gateway>¶: Specify a gateway for the subnet. The options are: <ip-address>: Specific IP address to use as the gateway, ‘none’: This subnet will not use a gateway, e.g.: –gateway 192.168.9.1, –gateway none.

--network-segment <network-segment>¶: Network segment to associate with this subnet (name or ID). It is only allowed to set the segment if the current value is None, the network must also have only one segment and only one subnet can exist on the network.

--description <description>¶: Set subnet description

--tag <tag>¶: Tag to be added to the subnet (repeat option to set multiple tags)

--no-tag¶: Clear tags associated with the subnet. Specify both –tag and –no-tag to overwrite current tags

--allocation-pool start=<ip-address>,end=<ip-address>¶: Allocation pool IP addresses for this subnet e.g.: start=192.168.199.2,end=192.168.199.254 (repeat option to add multiple IP addresses)

--no-allocation-pool¶: Clear associated allocation-pools from the subnet. Specify both –allocation-pool and –no-allocation-pool to overwrite the current allocation pool information.

--dns-nameserver <dns-nameserver>¶: DNS server for this subnet (repeat option to set multiple DNS servers)

--no-dns-nameservers¶: Clear existing information of DNS Nameservers. Specify both –dns-nameserver and –no-dns-nameserver to overwrite the current DNS Nameserver information.

--host-route destination=<subnet>,gateway=<ip-address>¶: Additional route for this subnet e.g.: destination=10.10.0.0/16,gateway=192.168.71.254 destination: destination subnet (in CIDR notation) gateway: nexthop IP address (repeat option to add multiple routes)

--no-host-route¶: Clear associated host-routes from the subnet. Specify both –host-route and –no-host-route to overwrite the current host route information.

--service-type <service-type>¶: Service type for this subnet e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to set multiple service types)

subnet¶: Subnet to modify (name or ID)

subnet show¶

Display subnet details

openstack subnet show <subnet>

subnet¶: Subnet to display (name or ID)

subnet unset¶

Unset subnet properties

openstack subnet unset
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--allocation-pool start=<ip-address>,end=<ip-address>]
    [--gateway]
    [--dns-nameserver <dns-nameserver>]
    [--host-route destination=<subnet>,gateway=<ip-address>]
    [--service-type <service-type>]
    [--tag <tag> | --all-tag]
    <subnet>

--extra-property type=<property_type>,name=<property_name>,value=<property_value>¶: Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

--allocation-pool start=<ip-address>,end=<ip-address>¶: Allocation pool IP addresses to be removed from this subnet e.g.: start=192.168.199.2,end=192.168.199.254 (repeat option to unset multiple allocation pools)

--gateway¶: Remove gateway IP from this subnet

--dns-nameserver <dns-nameserver>¶: DNS server to be removed from this subnet (repeat option to unset multiple DNS servers)

--host-route destination=<subnet>,gateway=<ip-address>¶: Route to be removed from this subnet e.g.: destination=10.10.0.0/16,gateway=192.168.71.254 destination: destination subnet (in CIDR notation) gateway: nexthop IP address (repeat option to unset multiple host routes)

--service-type <service-type>¶: Service type to be removed from this subnet e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to unset multiple service types)

--tag <tag>¶: Tag to be removed from the subnet (repeat option to remove multiple tags)

--all-tag¶: Clear all tags associated with the subnet

subnet¶: Subnet to modify (name or ID)

subnet