subnet¶

A subnet is a block of IP addresses and associated configuration state. Subnets are used to allocate IP addresses when new ports are created on a network.

Network v2

subnet create¶

Create new subnet

openstack subnet create
    [--project <project> [--project-domain <project-domain>]]
    [--subnet-pool <subnet-pool> | --use-default-subnet-pool [--prefix-length <prefix-length>]]
    [--subnet-range <subnet-range>]
    [--allocation-pool start=<ip-address>,end=<ip-address>]
    [--dhcp | --no-dhcp]
    [--dns-nameserver <dns-nameserver>]
    [--gateway <gateway>]
    [--host-route destination=<subnet>,gateway=<ip-address>]
    [--ip-version {4,6}]
    [--description <description>]
    [--ipv6-ra-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}]
    [--ipv6-address-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}]
    [--network-segment <network-segment>]
    [--service-type <service-type>]
    --network <network>
    <name>

--project <project>¶: Owner’s project (name or ID)

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--subnet-pool <subnet-pool>¶: Subnet pool from which this subnet will obtain a CIDR (name or ID)

--use-default-subnet-pool¶: Use default subnet pool for --ip-version

--prefix-length <prefix-length>¶: Prefix length for subnet allocation from subnet pool

--subnet-range <subnet-range>¶: Subnet range in CIDR notation (required if --subnet-pool is not specified, optional otherwise)

--allocation-pool start=<ip-address>,end=<ip-address>¶: Allocation pool IP addresses for this subnet e.g.: start=192.168.199.2,end=192.168.199.254 (repeat option to add multiple IP addresses)

--dhcp¶: Enable DHCP (default)

--no-dhcp¶: Disable DHCP

--dns-nameserver <dns-nameserver>¶: DNS server for this subnet (repeat option to set multiple DNS servers)

--gateway <gateway>¶: Specify a gateway for the subnet. The three options are: <ip-address>: Specific IP address to use as the gateway, ‘auto’: Gateway address should automatically be chosen from within the subnet itself, ‘none’: This subnet will not use a gateway, e.g.: --gateway 192.168.9.1, --gateway auto, --gateway none (default is ‘auto’).

--host-route destination=<subnet>,gateway=<ip-address>¶: Additional route for this subnet e.g.: destination=10.10.0.0/16,gateway=192.168.71.254 destination: destination subnet (in CIDR notation) gateway: nexthop IP address (repeat option to add multiple routes)

--ip-version {4,6}¶: IP version (default is 4). Note that when subnet pool is specified, IP version is determined from the subnet pool and this option is ignored.

--description <description>¶: Set subnet description

--ipv6-ra-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}¶: IPv6 RA (Router Advertisement) mode, valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac]

--ipv6-address-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}¶: IPv6 address mode, valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac]

--network-segment <network-segment>¶: Network segment to associate with this subnet (name or ID)

--service-type <service-type>¶: Service type for this subnet e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to set multiple service types)

--network <network>¶: Network this subnet belongs to (name or ID)

<name>: Name of subnet to create

subnet delete¶

Delete subnet(s)

openstack subnet delete
    <subnet> [<subnet> ...]

<subnet>: Subnet(s) to delete (name or ID)

subnet list¶

List subnets

openstack subnet list
    [--long]
    [--ip-version {4,6}]
    [--dhcp | --no-dhcp]
    [--project <project> [--project-domain <project-domain>]]
    [--network <network>]
    [--gateway <gateway>]
    [--name <name>]
    [--subnet-range <subnet-range>]

--long¶: List additional fields in output

--ip-version {4, 6}¶: List only subnets of given IP version in output. Allowed values for IP version are 4 and 6.

--dhcp¶: List subnets which have DHCP enabled

--no-dhcp¶: List subnets which have DHCP disabled

--service-type <service-type>¶: List only subnets of a given service type in output e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to list multiple service types)

--project <project>¶: List only subnets which belong to a given project (name or ID) in output

--project-domain <project-domain>¶: Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--network <network>¶: List only subnets which belong to a given network (name or ID) in output

--gateway <gateway>¶: List only subnets of given gateway IP in output

--name <name>¶: List only subnets of given name in output

--subnet-range <subnet-range>¶: List only subnets of given subnet range (in CIDR notation) in output e.g.: --subnet-range 10.10.0.0/16

subnet set¶

Set subnet properties

openstack subnet set
    [--allocation-pool start=<ip-address>,end=<ip-address>]
    [--no-allocation-pool]
    [--dhcp | --no-dhcp]
    [--dns-nameserver <dns-nameserver>]
    [--no-dns-nameserver]
    [--gateway <gateway-ip>]
    [--host-route destination=<subnet>,gateway=<ip-address>]
    [--no-host-route]
    [--service-type <service-type>]
    [--name <new-name>]
    [--description <description>]
    <subnet>

--allocation-pool start=<ip-address>,end=<ip-address>¶: Allocation pool IP addresses for this subnet e.g.: start=192.168.199.2,end=192.168.199.254 (repeat option to add multiple IP addresses)

--no-allocation-pool¶: Clear associated allocation pools from this subnet. Specify both --allocation-pool and --no-allocation-pool to overwrite the current allocation pool information.

--dhcp¶: Enable DHCP

--no-dhcp¶: Disable DHCP

--dns-nameserver <dns-nameserver>¶: DNS server for this subnet (repeat option to set multiple DNS servers)

--no-dns-nameservers¶: Clear existing information of DNS servers. Specify both --dns-nameserver and --no-dns-nameservers to overwrite the current DNS server information.

--gateway <gateway>¶: Specify a gateway for the subnet. The options are: <ip-address>: Specific IP address to use as the gateway, ‘none’: This subnet will not use a gateway, e.g.: --gateway 192.168.9.1, --gateway none.

--host-route destination=<subnet>,gateway=<ip-address>¶: Additional route for this subnet e.g.: destination=10.10.0.0/16,gateway=192.168.71.254 destination: destination subnet (in CIDR notation) gateway: nexthop IP address

--no-host-route¶: Clear associated host routes from this subnet. Specify both --host-route and --no-host-route to overwrite the current host route information.

--service-type <service-type>¶: Service type for this subnet e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to set multiple service types)

--description <description>¶: Set subnet description

--name¶: Updated name of the subnet

<subnet>: Subnet to modify (name or ID)

subnet show¶

Display subnet details

openstack subnet show
    <subnet>

<subnet>: Subnet to display (name or ID)

subnet unset¶

Unset subnet properties

openstack subnet unset
    [--allocation-pool start=<ip-address>,end=<ip-address> [...]]
    [--dns-nameserver <dns-nameserver> [...]]
    [--host-route destination=<subnet>,gateway=<ip-address> [...]]
    [--service-type <service-type>]
    <subnet>

--dns-nameserver <dns-nameserver>¶: DNS server to be removed from this subnet (repeat option to unset multiple DNS servers)

--allocation-pool start=<ip-address>,end=<ip-address>¶: Allocation pool IP addresses to be removed from this subnet e.g.: start=192.168.199.2,end=192.168.199.254 (repeat option to unset multiple allocation pools)

--host-route destination=<subnet>,gateway=<ip-address>¶: Route to be removed from this subnet e.g.: destination=10.10.0.0/16,gateway=192.168.71.254 destination: destination subnet (in CIDR notation) gateway: nexthop IP address (repeat option to unset multiple host routes)

--service-type <service-type>¶: Service type to be removed from this subnet e.g.: network:floatingip_agent_gateway. Must be a valid device owner value for a network port (repeat option to unset multiple service types)

<subnet>: Subnet to modify (name or ID)

OpenStack

subnet¶

subnet create¶

subnet delete¶

subnet list¶

subnet set¶

subnet show¶

subnet unset¶

Table Of Contents

Previous topic

Next topic

This Page

OpenStack

subnet¶

subnet create¶

subnet delete¶

subnet list¶

subnet set¶

subnet show¶

subnet unset¶

Table Of Contents

Previous topic

Next topic

This Page

Quick search