Nodes

updated: None

Nodes

Nodes¶

Concept¶

A Node is a logical object managed by the Senlin service. A node can be a member of at most one cluster at any time. A node can be an orphan node which means it doesn’t belong to any clusters. Senlin provides APIs and command line supports to manage node’s cluster membership. Please refer to Cluster Membership for details.

A node has a profile_id property when created that specifies which Profile to use when creating a physical object that backs the node. Please refer to Profiles for the creation and management of profile objects.

Listing Nodes¶

To list nodes that are managed by the Senlin service, you will use the command openstack cluster node list. For example:

$ openstack cluster node list
+----------+--------+-------+--------+------------+-------------+...
| id       | name   | index | status | cluster_id | physical_id |
+----------+--------+-------+--------+------------+-------------+...
| e1b39a08 | node1  | -1    | ACTIVE |            | 89ce0d2b    |
| 57962220 | node-3 | -1    | ACTIVE |            | 3386e306    |
| b28692a5 | stack1 | -1    | ACTIVE | 2b7e9294   | fdf028a6    |
| 4be10a88 | stack2 | -1    | ACTIVE | 2b7e9294   | 7c87f545    |
+----------+--------+-------+--------+------------+-------------+...

Note that some columns in the output table are short ID of objects. Senlin command line use short IDs to save real estate on screen so that more useful information can be shown on a single line. To show the full ID in the list, you can add the option --full-id to the command.

Sorting the List¶

You can specify the sorting keys and sorting direction when list nodes, using the option --sort. The --sort option accepts a string of format key1[:dir1],key2[:dir2],key3[:dir3], where the keys used are node properties and the dirs can be one of asc and desc. When omitted, Senlin sorts a given key using asc as the default direction.

For example, the following command sorts the nodes using the status property in descending order:

$ openstack cluster node list --sort status:desc

When sorting the list of nodes, you can use one of index, name, status, init_at, created_at and updated_at.

Filtering the List¶

You can specify the option --cluster to list nodes that are members of a specific cluster. For example:

$ openstack cluster node list --cluster c3
+----------+---------+-------+--------+------------+-------------+...
| id       | name    | index | status | cluster_id | physical_id |
+----------+---------+-------+--------+------------+-------------+...
| b28692a5 | stack1  | -1    | ACTIVE | 2b7e9294   | fdf028a6    |
| 4be10a88 | stack2  | -1    | ACTIVE | 2b7e9294   | 7c87f545    |
+----------+---------+-------+--------+------------+-------------+...

Besides these two options, you can add the option --filters to the command openstack cluster node list to specify keys (node property names) and values you want to filter the list. The valid keys for filtering are name and status. For example, the command below filters the list by node status ACTIVE:

$ openstack cluster node list --filters status=ACTIVE

Paginating the List¶

In case you have a large number of nodes, you can limit the number of nodes returned from Senlin server each time, using the option --limit. For example:

$ openstack cluster node list --limit 1

Another option you can specify is the ID of a node after which you want to see the returned list starts. In other words, you don’t want to see those nodes with IDs that is or come before the one you specify. You can use the option --marker for this purpose. For example:

$ openstack node-list --marker 765385ed-f480-453a-8601-6fb256f512fc

With option --marker and option --limit, you will be able to control how many node records you will get from each request.

Creating a Node¶

To create a node, you need to specify the ID or name of the profile to be used. For example, the following example creates a node named test_node using a profile named pstack:

$ senlin node-create --profile pstack test_node
+---------------+--------------------------------------+
| Property      | Value                                |
+---------------+--------------------------------------+
| cluster_id    | None                                 |
| created_at    | None                                 |
| data          | {}                                   |
| dependents    | {}                                   |
| details       | None                                 |
| id            | 1984b5a0-9dd7-4dda-b1e6-e8c1f640598f |
| index         | -1                                   |
| init_at       | 2015-07-09T11:41:18                  |
| metadata      | {}                                   |
| name          | test_node                            |
| physical_id   |                                      |
| profile_id    | 9b127538-a675-4271-ab9b-f24f54cfe173 |
| profile_name  | pstack                               |
| project       | 333acb15a43242f4a609a27cb097a8f2     |
| role          | None                                 |
| status        | CREATING                             |
| status_reason | Creation in progress                 |
| updated_at    | None                                 |
+---------------+--------------------------------------+

When processing this request, Senlin engine will verify if the profile value specified is a profile name, a profile ID or the short ID of a profile object. If the profile is not found or multiple profiles found matching the value, you will receive an error message.

Note that the index property of the new node is -1. This is because we didn’t specify the owning cluster for the node. To join a node to an existing cluster, you can either use the openstack cluster member add command (Cluster Membership) after the node is created, or specify the owning cluster upon node creation, as shown by the following example:

$ senlin node-create --profile pstack --cluster c1 test_node

The command above creates a new node using profile pstack and makes it a member of the cluster c1, specified using the option --cluster. When a node becomes a member of a cluster, it will get a value for its index property that uniquely identifies itself within the owning cluster.

When the owning cluster is specified, Senlin engine will verify if the cluster specified is referencing a profile that has the same profile type as that of the new node. If the profile types don’t match, you will receive an error message from the openstack cluster command.

Another argument that could be useful when creating a new node is the option --role. The value could be used by a profile type implementation to treat nodes differently. For example, the following command creates a node with a master role:

$ senlin node-create --profile pstack --cluster c1 \
    --role master master_node

A profile type implementation may check this role value when operating the physical object that backs the node. It is okay for a profile type implementation to ignore this value.

The last argument you can specify when creating a new node is the option --metadata. The value for this option is a list of key-value pairs separated by a semicolon (‘;‘). These key-value pairs are attached to the node and can be used for whatever purposes. For example:

$ senlin node-create --profile pstack \
    --metadata owner=JohnWhite test_node

Showing Details of a Node¶

You can use the name, the ID or the “short ID” of a node to name a node for show. The Senlin API and engine will verify if the identifier you specified can uniquely identify a node. An error message will be returned if there is no node matching the identifier or if more than one node matching it.

An example is shown below:

$ openstack cluster node show test_node
+---------------+--------------------------------------+
| Property      | Value                                |
+---------------+--------------------------------------+
| cluster_id    | None                                 |
| created_at    | 2015-07-09T11:41:20                  |
| data          | {}                                   |
| dependents    | {}                                   |
| details       | {}                                   |
| id            | 1984b5a0-9dd7-4dda-b1e6-e8c1f640598f |
| index         | -1                                   |
| init_at       | 2015-07-09T11:41:18                  |
| metadata      | {}                                   |
| name          | test_node                            |
| physical_id   | 0e444642-b280-4c88-8be4-76ad0d158dac |
| profile_id    | 9b127538-a675-4271-ab9b-f24f54cfe173 |
| profile_name  | pstack                               |
| project       | 333acb15a43242f4a609a27cb097a8f2     |
| role          | None                                 |
| status        | ACTIVE                               |
| status_reason | Creation succeeded                   |
| updated_at    | None                                 |
+---------------+--------------------------------------+

From the output, you can see the physical_id of a node (if it has been successfully created). For different profile types, this value may be the ID of an object that is of certain type. For example, if the profile type used is “os.heat.stack”, this means the Heat stack ID; if the profile type used is “os.nova.server”, it gives the Nova server ID.

An useful argument for the command openstack cluster node show is the option --details. When specified, you will get the details about the physical object that backs the node. For example:

$ openstack cluster node show --details test_node

Updating a Node¶

Once a node has been created, you can change its properties using the command openstack cluster node update. For example, to change the name of a node, you can use the option --name , as shown by the following command:

$ openstack cluster node update --name new_node_name old_node_name

Similarly, you can modify the role property of a node using the option --role. For example:

$ openstack cluster node update --role slave master_node

You can change the metadata associated with a node using the option --metadata:

$ openstack cluster node update --metadata version=2.1 my_node

Using the openstack cluster node update command, you can change the profile used by a node. The following example updates a node for switching to use a different profile:

$ senlin node-update --profile fedora21_server fedora20_server

Suppose the node fedora20_server is now using a profile of type os.nova.server where a Fedora 20 image is used, the command above will initiate an upgrade to use a new profile with a Fedora 21 image.

Senlin engine will verify whether the new profile has the same profile type with that of the existing one and whether the new profile has a well-formed spec property. If everything is fine, the engine will start profile update process.

Deleting a Node¶

A node can be deleted using the openstack cluster node delete command, for example:

$ openstack cluster node delete my_node

Note that in this command you can use the name, the ID or the “short ID” to specify the node you want to delete. If the specified criteria cannot match any nodes, you will get a ResourceNotFound exception. If more than one node matches the criteria, you will get a MultipleChoices exception.