The sushy.resources.constants Module¶

sushy.resources.constants.INDICATOR_LED_BLINKING = 'indicator led blinking'¶

The Indicator LED is blinking

sushy.resources.constants.INDICATOR_LED_LIT = 'indicator led lit'¶

The Indicator LED is lit

sushy.resources.constants.INDICATOR_LED_OFF = 'indicator led off'¶

The Indicator LED is off

sushy.resources.constants.INDICATOR_LED_UNKNOWN = 'indicator led unknown'¶

The state of the Indicator LED cannot be determine

sushy.resources.constants.POWER_STATE_OFF = 'off'¶

The resource is powered off, although some components may continue to have AUX power such as management controller

sushy.resources.constants.POWER_STATE_ON = 'on'¶

The resource is powered on

sushy.resources.constants.POWER_STATE_POWERING_OFF = 'powering off'¶

A temporary state between On and Off. The power off action can take time while the OS is in the shutdown process

sushy.resources.constants.POWER_STATE_POWERING_ON = 'powering on'¶

A temporary state between Off and On. This temporary state can be very short

sushy.resources.constants.RESET_TYPE_FORCE_OFF = 'force off'¶

Turn the unit off immediately (non-graceful shutdown)

sushy.resources.constants.RESET_TYPE_FORCE_ON = 'force on'¶

Turn the unit on immediately

sushy.resources.constants.RESET_TYPE_FORCE_RESTART = 'force restart'¶

Perform an immediate (non-graceful) shutdown, followed by a restart

sushy.resources.constants.RESET_TYPE_GRACEFUL_RESTART = 'graceful restart'¶

Perform a graceful shutdown followed by a restart of the system

sushy.resources.constants.RESET_TYPE_GRACEFUL_SHUTDOWN = 'graceful shutdown'¶

Perform a graceful shutdown and power off

sushy.resources.constants.RESET_TYPE_NMI = 'nmi'¶

Generate a Diagnostic Interrupt (usually an NMI on x86 systems) to cease normal operations, perform diagnostic actions and typically halt the system

sushy.resources.constants.RESET_TYPE_ON = 'on'¶

Turn the unit on

sushy.resources.constants.RESET_TYPE_POWER_CYCLE = 'power cycle'¶

Perform a power cycle of the unit

sushy.resources.constants.RESET_TYPE_PUSH_POWER_BUTTON = 'push power button'¶

Simulate the pressing of the physical power button on this unit