SAIO (Swift All In One)

Note

This guide assumes an existing Linux server. A physical machine or VM will work. We recommend configuring it with at least 2GB of memory and 40GB of storage space. We recommend using a VM in order to isolate Swift and its dependencies from other projects you may be working on.

Instructions for setting up a development VM

This section documents setting up a virtual machine for doing Swift development. The virtual machine will emulate running a four node Swift cluster. To begin:

  • Get a Linux system server image, this guide will cover:

    • Ubuntu 14.04, 16.04 LTS

    • CentOS 7

    • Fedora

    • OpenSuse

  • Create guest virtual machine from the image.

What’s in a <your-user-name>

Much of the configuration described in this guide requires escalated administrator (root) privileges; however, we assume that administrator logs in as an unprivileged user and can use sudo to run privileged commands.

Swift processes also run under a separate user and group, set by configuration option, and referenced as <your-user-name>:<your-group-name>. The default user is swift, which may not exist on your system. These instructions are intended to allow a developer to use his/her username for <your-user-name>:<your-group-name>.

Note

For OpenSuse users, a user’s primary group is users, so you have 2 options:

  • Change ${USER}:${USER} to ${USER}:users in all references of this guide; or

  • Create a group for your username and add yourself to it:

    sudo groupadd ${USER} && sudo gpasswd -a ${USER} ${USER} && newgrp ${USER}

Installing dependencies

  • On apt based systems:

    sudo apt-get update
sudo apt-get install curl gcc memcached rsync sqlite3 xfsprogs \
                     git-core libffi-dev python-setuptools \
                     liberasurecode-dev libssl-dev
sudo apt-get install python-coverage python-dev python-nose \
                     python-xattr python-eventlet \
                     python-greenlet python-pastedeploy \
                     python-netifaces python-pip python-dnspython \
                     python-mock

  • On CentOS (requires additional repositories):

    sudo yum update
sudo yum install epel-release
sudo yum-config-manager --enable epel extras
sudo yum install centos-release-openstack-train
sudo yum install curl gcc memcached rsync sqlite xfsprogs git-core \
                 libffi-devel xinetd liberasurecode-devel \
                 openssl-devel python-setuptools \
                 python-coverage python-devel python-nose \
                 pyxattr python-eventlet \
                 python-greenlet python-paste-deploy \
                 python-netifaces python-pip python-dns \
                 python-mock

  • On Fedora:

    sudo dnf update
sudo dnf install curl gcc memcached rsync-daemon sqlite xfsprogs git-core \
                 libffi-devel liberasurecode-devel python-pyeclib \
                 openssl-devel python-setuptools \
                 python-coverage python-devel python-nose \
                 python-pyxattr python-eventlet \
                 python-greenlet python-paste-deploy \
                 python-netifaces python-pip python-dns \
                 python-mock

  • On OpenSuse:

    sudo zypper install curl gcc memcached rsync sqlite3 xfsprogs git-core \
                    libffi-devel liberasurecode-devel python2-setuptools \
                    libopenssl-devel
sudo zypper install python2-coverage python-devel python2-nose \
                    python-xattr python-eventlet python2-greenlet \
                    python2-netifaces python2-pip python2-dnspython \
                    python2-mock

Note

This installs necessary system dependencies and most of the python dependencies. Later in the process setuptools/distribute or pip will install and/or upgrade packages.

Configuring storage

Swift requires some space on XFS filesystems to store data and run tests.

Choose either Using a partition for storage or Using a loopback device for storage.

Using a partition for storage

If you are going to use a separate partition for Swift data, be sure to add another device when creating the VM, and follow these instructions:

Note

The disk does not have to be /dev/sdb1 (for example, it could be /dev/vdb1) however the mount point should still be /mnt/sdb1.

  1. Set up a single partition on the device (this will wipe the drive):

    sudo parted /dev/sdb mklabel msdos mkpart p xfs 0% 100%

  2. Create an XFS file system on the partition:

    sudo mkfs.xfs /dev/sdb1

  3. Find the UUID of the new partition:

    sudo blkid

  4. Edit /etc/fstab and add:

    UUID="<UUID-from-output-above>" /mnt/sdb1 xfs noatime 0 0

  5. Create the Swift data mount point and test that mounting works:

    sudo mkdir /mnt/sdb1
sudo mount -a

  6. Next, skip to Common Post-Device Setup.

Using a loopback device for storage

If you want to use a loopback device instead of another partition, follow these instructions:

  1. Create the file for the loopback device:

    sudo mkdir -p /srv
sudo truncate -s 1GB /srv/swift-disk
sudo mkfs.xfs /srv/swift-disk

    Modify size specified in the truncate command to make a larger or smaller partition as needed.

  2. Edit /etc/fstab and add:

    /srv/swift-disk /mnt/sdb1 xfs loop,noatime 0 0

  3. Create the Swift data mount point and test that mounting works:

    sudo mkdir /mnt/sdb1
sudo mount -a

Common Post-Device Setup

  1. Create the individualized data links:

    sudo mkdir /mnt/sdb1/1 /mnt/sdb1/2 /mnt/sdb1/3 /mnt/sdb1/4
sudo chown ${USER}:${USER} /mnt/sdb1/*
for x in {1..4}; do sudo ln -s /mnt/sdb1/$x /srv/$x; done
sudo mkdir -p /srv/1/node/sdb1 /srv/1/node/sdb5 \
              /srv/2/node/sdb2 /srv/2/node/sdb6 \
              /srv/3/node/sdb3 /srv/3/node/sdb7 \
              /srv/4/node/sdb4 /srv/4/node/sdb8
sudo mkdir -p /var/run/swift
sudo mkdir -p /var/cache/swift /var/cache/swift2 \
              /var/cache/swift3 /var/cache/swift4
sudo chown -R ${USER}:${USER} /var/run/swift
sudo chown -R ${USER}:${USER} /var/cache/swift*
# **Make sure to include the trailing slash after /srv/$x/**
for x in {1..4}; do sudo chown -R ${USER}:${USER} /srv/$x/; done

    Note

    We create the mount points and mount the loopback file under /mnt/sdb1. This file will contain one directory per simulated Swift node, each owned by the current Swift user.

    We then create symlinks to these directories under /srv. If the disk sdb or loopback file is unmounted, files will not be written under /srv/*, because the symbolic link destination /mnt/sdb1/* will not exist. This prevents disk sync operations from writing to the root partition in the event a drive is unmounted.

  2. Restore appropriate permissions on reboot.

    • On traditional Linux systems, add the following lines to /etc/rc.local (before the exit 0):

      mkdir -p /var/cache/swift /var/cache/swift2 /var/cache/swift3 /var/cache/swift4
chown <your-user-name>:<your-group-name> /var/cache/swift*
mkdir -p /var/run/swift
chown <your-user-name>:<your-group-name> /var/run/swift

    • On CentOS and Fedora we can use systemd (rc.local is deprecated):

      cat << EOF |sudo tee /etc/tmpfiles.d/swift.conf
d /var/cache/swift 0755 ${USER} ${USER} - -
d /var/cache/swift2 0755 ${USER} ${USER} - -
d /var/cache/swift3 0755 ${USER} ${USER} - -
d /var/cache/swift4 0755 ${USER} ${USER} - -
d /var/run/swift 0755 ${USER} ${USER} - -
EOF

    • On OpenSuse place the lines in /etc/init.d/boot.local.

    Note

    On some systems the rc file might need to be an executable shell script.

Creating an XFS tmp dir

Tests require having a directory available on an XFS filesystem. By default the tests use /tmp, however this can be pointed elsewhere with the TMPDIR environment variable.

Note

If your root filesystem is XFS, you can skip this section if /tmp is just a directory and not a mounted tmpfs. Or you could simply point to any existing directory owned by your user by specifying it with the TMPDIR environment variable.

If your root filesystem is not XFS, you should create a loopback device, format it with XFS and mount it. You can mount it over /tmp or to another location and specify it with the TMPDIR environment variable.

  • Create the file for the tmp loopback device:

    sudo mkdir -p /srv
sudo truncate -s 1GB /srv/swift-tmp  # create 1GB file for XFS in /srv
sudo mkfs.xfs /srv/swift-tmp

  • To mount the tmp loopback device at /tmp, do the following:

    sudo mount -o loop,noatime /srv/swift-tmp /tmp
sudo chmod -R 1777 /tmp

    • To persist this, edit and add the following to /etc/fstab:

      /srv/swift-tmp /tmp xfs rw,noatime,attr2,inode64,noquota 0 0

  • To mount the tmp loopback at an alternate location (for example, /mnt/tmp), do the following:

    sudo mkdir -p /mnt/tmp
sudo mount -o loop,noatime /srv/swift-tmp /mnt/tmp
sudo chown ${USER}:${USER} /mnt/tmp

    • To persist this, edit and add the following to /etc/fstab:

      /srv/swift-tmp /mnt/tmp xfs rw,noatime,attr2,inode64,noquota 0 0

    • Set your TMPDIR environment dir so that Swift looks in the right location:

      export TMPDIR=/mnt/tmp
echo "export TMPDIR=/mnt/tmp" >> $HOME/.bashrc

Getting the code

  1. Check out the python-swiftclient repo:

    cd $HOME; git clone https://opendev.org/openstack/python-swiftclient.git

  2. Build a development installation of python-swiftclient:

    cd $HOME/python-swiftclient; sudo python setup.py develop; cd -

    Ubuntu 12.04 users need to install python-swiftclient’s dependencies before the installation of python-swiftclient. This is due to a bug in an older version of setup tools:

    cd $HOME/python-swiftclient; sudo pip install -r requirements.txt; sudo python setup.py develop; cd -

  3. Check out the Swift repo:

    git clone https://github.com/openstack/swift.git

  4. Build a development installation of Swift:

    cd $HOME/swift; sudo pip install --no-binary cryptography -r requirements.txt; sudo python setup.py develop; cd -

    Note

    Due to a difference in how libssl.so is named in OpenSuse vs. other Linux distros the wheel/binary won’t work; thus we use --no-binary cryptography to build cryptography locally.

    Fedora users might have to perform the following if development installation of Swift fails:

    sudo pip install -U xattr

  5. Install Swift’s test dependencies:

    cd $HOME/swift; sudo pip install -r test-requirements.txt

Setting up rsync

  1. Create /etc/rsyncd.conf:

    sudo cp $HOME/swift/doc/saio/rsyncd.conf /etc/
sudo sed -i "s/<your-user-name>/${USER}/" /etc/rsyncd.conf

    Here is the default rsyncd.conf file contents maintained in the repo that is copied and fixed up above:

    uid = <your-user-name>
gid = <your-user-name>
log file = /var/log/rsyncd.log
pid file = /var/run/rsyncd.pid
address = 0.0.0.0

[account6212]
max connections = 25
path = /srv/1/node/
read only = false
lock file = /var/lock/account6212.lock

[account6222]
max connections = 25
path = /srv/2/node/
read only = false
lock file = /var/lock/account6222.lock

[account6232]
max connections = 25
path = /srv/3/node/
read only = false
lock file = /var/lock/account6232.lock

[account6242]
max connections = 25
path = /srv/4/node/
read only = false
lock file = /var/lock/account6242.lock

[container6211]
max connections = 25
path = /srv/1/node/
read only = false
lock file = /var/lock/container6211.lock

[container6221]
max connections = 25
path = /srv/2/node/
read only = false
lock file = /var/lock/container6221.lock

[container6231]
max connections = 25
path = /srv/3/node/
read only = false
lock file = /var/lock/container6231.lock

[container6241]
max connections = 25
path = /srv/4/node/
read only = false
lock file = /var/lock/container6241.lock

[object6210]
max connections = 25
path = /srv/1/node/
read only = false
lock file = /var/lock/object6210.lock

[object6220]
max connections = 25
path = /srv/2/node/
read only = false
lock file = /var/lock/object6220.lock

[object6230]
max connections = 25
path = /srv/3/node/
read only = false
lock file = /var/lock/object6230.lock

[object6240]
max connections = 25
path = /srv/4/node/
read only = false
lock file = /var/lock/object6240.lock

  2. Enable rsync daemon

    • On Ubuntu, edit the following line in /etc/default/rsync:

      RSYNC_ENABLE=true

    Note

    You might have to create the file to perform the edits.

    • On CentOS and Fedora, enable the systemd service:

      sudo systemctl enable rsyncd

    • On OpenSuse, nothing needs to happen here.

  3. On platforms with SELinux in Enforcing mode, either set to Permissive:

    sudo setenforce Permissive
sudo sed -i 's/^SELINUX=.*/SELINUX=permissive/g' /etc/selinux/config

    Or just allow rsync full access:

    sudo setsebool -P rsync_full_access 1

  4. Start the rsync daemon

    • On Ubuntu 14.04, run:

      sudo service rsync restart

    • On Ubuntu 16.04, run:

      sudo systemctl enable rsync
sudo systemctl start rsync

    • On CentOS, Fedora and OpenSuse, run:

      sudo systemctl start rsyncd

    • On other xinetd based systems simply run:

      sudo service xinetd restart

  5. Verify rsync is accepting connections for all servers:

    rsync rsync://pub@localhost/

    You should see the following output from the above command:

    account6212
account6222
account6232
account6242
container6211
container6221
container6231
container6241
object6210
object6220
object6230
object6240

Starting memcached

On non-Ubuntu distros you need to ensure memcached is running:

sudo service memcached start
sudo chkconfig memcached on

or:

sudo systemctl enable memcached
sudo systemctl start memcached

The tempauth middleware stores tokens in memcached. If memcached is not running, tokens cannot be validated, and accessing Swift becomes impossible.

Optional: Setting up rsyslog for individual logging

Fedora and OpenSuse may not have rsyslog installed, in which case you will need to install it if you want to use individual logging.

  1. Install rsyslogd

    • On Fedora:

      sudo dnf install rsyslog

    • On OpenSuse:

      sudo zypper install rsyslog

  2. Install the Swift rsyslogd configuration:

    sudo cp $HOME/swift/doc/saio/rsyslog.d/10-swift.conf /etc/rsyslog.d/

    Be sure to review that conf file to determine if you want all the logs in one file vs. all the logs separated out, and if you want hourly logs for stats processing. For convenience, we provide its default contents below:

    # Uncomment the following to have a log containing all logs together
#local1,local2,local3,local4,local5.*   /var/log/swift/all.log

# Uncomment the following to have hourly proxy logs for stats processing
#$template HourlyProxyLog,"/var/log/swift/hourly/%$YEAR%%$MONTH%%$DAY%%$HOUR%"
#local1.*;local1.!notice ?HourlyProxyLog

local1.*;local1.!notice /var/log/swift/proxy.log
local1.notice           /var/log/swift/proxy.error
local1.*                ~

local2.*;local2.!notice /var/log/swift/storage1.log
local2.notice           /var/log/swift/storage1.error
local2.*                ~

local3.*;local3.!notice /var/log/swift/storage2.log
local3.notice           /var/log/swift/storage2.error
local3.*                ~

local4.*;local4.!notice /var/log/swift/storage3.log
local4.notice           /var/log/swift/storage3.error
local4.*                ~

local5.*;local5.!notice /var/log/swift/storage4.log
local5.notice           /var/log/swift/storage4.error
local5.*                ~

local6.*;local6.!notice /var/log/swift/expirer.log
local6.notice           /var/log/swift/expirer.error
local6.*                ~

  3. Edit /etc/rsyslog.conf and make the following change (usually in the “GLOBAL DIRECTIVES” section):

    $PrivDropToGroup adm

  4. If using hourly logs (see above) perform:

    sudo mkdir -p /var/log/swift/hourly

    Otherwise perform:

    sudo mkdir -p /var/log/swift

  5. Setup the logging directory and start syslog:

    • On Ubuntu:

      sudo chown -R syslog.adm /var/log/swift
sudo chmod -R g+w /var/log/swift
sudo service rsyslog restart

    • On CentOS, Fedora and OpenSuse:

      sudo chown -R root:adm /var/log/swift
sudo chmod -R g+w /var/log/swift
sudo systemctl restart rsyslog
sudo systemctl enable rsyslog

Configuring each node

After performing the following steps, be sure to verify that Swift has access to resulting configuration files (sample configuration files are provided with all defaults in line-by-line comments).

  1. Optionally remove an existing swift directory:

    sudo rm -rf /etc/swift

  2. Populate the /etc/swift directory itself:

    cd $HOME/swift/doc; sudo cp -r saio/swift /etc/swift; cd -
sudo chown -R ${USER}:${USER} /etc/swift

  3. Update <your-user-name> references in the Swift config files:

    find /etc/swift/ -name \*.conf | xargs sudo sed -i "s/<your-user-name>/${USER}/"

The contents of the configuration files provided by executing the above commands are as follows:

  1. /etc/swift/swift.conf

    [swift-hash]
# random unique strings that can never change (DO NOT LOSE)
# Use only printable chars (python -c "import string; print(string.printable)")
swift_hash_path_prefix = changeme
swift_hash_path_suffix = changeme

[storage-policy:0]
name = gold
policy_type = replication
default = yes

[storage-policy:1]
name = silver
policy_type = replication

[storage-policy:2]
name = ec42
policy_type = erasure_coding
ec_type = liberasurecode_rs_vand
ec_num_data_fragments = 4
ec_num_parity_fragments = 2

  2. /etc/swift/proxy-server.conf

    [DEFAULT]
bind_ip = 127.0.0.1
bind_port = 8080
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL1
eventlet_debug = true

[pipeline:main]
# Yes, proxy-logging appears twice. This is so that
# middleware-originated requests get logged too.
pipeline = catch_errors gatekeeper healthcheck proxy-logging cache etag-quoter listing_formats bulk tempurl ratelimit crossdomain container_sync tempauth staticweb copy container-quotas account-quotas mpu slo dlo versioned_writes symlink proxy-logging proxy-server

[filter:catch_errors]
use = egg:swift#catch_errors

[filter:healthcheck]
use = egg:swift#healthcheck

[filter:proxy-logging]
use = egg:swift#proxy_logging

[filter:bulk]
use = egg:swift#bulk

[filter:ratelimit]
use = egg:swift#ratelimit

[filter:crossdomain]
use = egg:swift#crossdomain

[filter:dlo]
use = egg:swift#dlo

[filter:mpu]
use = egg:swift#mpu

[filter:slo]
use = egg:swift#slo

[filter:container_sync]
use = egg:swift#container_sync
current = //saio/saio_endpoint

[filter:tempurl]
use = egg:swift#tempurl

[filter:tempauth]
use = egg:swift#tempauth
user_admin_admin = admin .admin .reseller_admin
user_test_tester = testing .admin
user_test_tester2 = testing2 .admin
user_test_tester3 = testing3
user_test2_tester2 = testing2 .admin

[filter:staticweb]
use = egg:swift#staticweb

[filter:account-quotas]
use = egg:swift#account_quotas

[filter:container-quotas]
use = egg:swift#container_quotas

[filter:cache]
use = egg:swift#memcache

[filter:etag-quoter]
use = egg:swift#etag_quoter
enable_by_default = false

[filter:gatekeeper]
use = egg:swift#gatekeeper

[filter:versioned_writes]
use = egg:swift#versioned_writes
allow_versioned_writes = true
allow_object_versioning = true

[filter:copy]
use = egg:swift#copy

[filter:listing_formats]
use = egg:swift#listing_formats

[filter:domain_remap]
use = egg:swift#domain_remap

[filter:symlink]
use = egg:swift#symlink

# To enable, add the s3api middleware to the pipeline before tempauth
[filter:s3api]
use = egg:swift#s3api
s3_acl = yes
check_bucket_owner = yes
cors_preflight_allow_origin = *

# Example to create root secret: `openssl rand -base64 32`
[filter:keymaster]
use = egg:swift#keymaster
encryption_root_secret = changeme/changeme/changeme/changeme/change/=

# To enable use of encryption add both middlewares to pipeline, example:
# <other middleware> keymaster encryption proxy-logging proxy-server
[filter:encryption]
use = egg:swift#encryption

[app:proxy-server]
use = egg:swift#proxy
allow_account_management = true
account_autocreate = true

  3. /etc/swift/object-expirer.conf

    [DEFAULT]
# swift_dir = /etc/swift
user = <your-user-name>
# You can specify default log routing here if you want:
log_name = object-expirer
log_facility = LOG_LOCAL6
log_level = INFO
#log_address = /dev/log
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =

[object-expirer]
interval = 300
# report_interval = 300
# concurrency is the level of concurrency to use to do the work, this value
# must be set to at least 1
# concurrency = 1
# processes is how many parts to divide the work into, one part per process
#   that will be doing the work
# processes set 0 means that a single process will be doing all the work
# processes can also be specified on the command line and will override the
#   config value
# processes = 0
# process is which of the parts a particular process will work on
# process can also be specified on the command line and will override the config
#   value
# process is "zero based", if you want to use 3 processes, you should run
#  processes with process set to 0, 1, and 2
# process = 0

[pipeline:main]
pipeline = catch_errors cache proxy-server

[app:proxy-server]
use = egg:swift#proxy
# See proxy-server.conf-sample for options

[filter:cache]
use = egg:swift#memcache
# See proxy-server.conf-sample for options

[filter:catch_errors]
use = egg:swift#catch_errors
# See proxy-server.conf-sample for options

  4. /etc/swift/container-sync-realms.conf

    [saio]
key = changeme
key2 = changeme
cluster_saio_endpoint = http://127.0.0.1:8080/v1/

  5. /etc/swift/account-server/1.conf

    [DEFAULT]
devices = /srv/1/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.1
bind_port = 6212
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL2
recon_cache_path = /var/cache/swift
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon account-server

[app:account-server]
use = egg:swift#account

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[account-replicator]
rsync_module = {replication_ip}::account{replication_port}

[account-auditor]

[account-reaper]

  6. /etc/swift/container-server/1.conf

    [DEFAULT]
devices = /srv/1/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.1
bind_port = 6211
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL2
recon_cache_path = /var/cache/swift
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon container-server

[app:container-server]
use = egg:swift#container

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[container-replicator]
rsync_module = {replication_ip}::container{replication_port}

[container-updater]

[container-auditor]

[container-sync]

[container-sharder]
auto_shard = true
rsync_module = {replication_ip}::container{replication_port}
# This is intentionally much smaller than the default of 1,000,000 so tests
# can run in a reasonable amount of time
shard_container_threshold = 100
# The probe tests make explicit assumptions about the batch sizes
shard_scanner_batch_size = 10
cleave_batch_size = 2

  7. /etc/swift/container-reconciler/1.conf

    [DEFAULT]
# swift_dir = /etc/swift
user = <your-user-name>
# You can specify default log routing here if you want:
# log_name = swift
log_facility = LOG_LOCAL2
# log_level = INFO
# log_address = /dev/log
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =

[container-reconciler]
# reclaim_age = 604800
# interval = 300
# request_tries = 3
processes = 4
process = 0

[pipeline:main]
pipeline = catch_errors proxy-logging cache proxy-server

[app:proxy-server]
use = egg:swift#proxy
# See proxy-server.conf-sample for options

[filter:cache]
use = egg:swift#memcache
# See proxy-server.conf-sample for options

[filter:proxy-logging]
use = egg:swift#proxy_logging

[filter:catch_errors]
use = egg:swift#catch_errors
# See proxy-server.conf-sample for options

  8. /etc/swift/object-server/1.conf

    [DEFAULT]
devices = /srv/1/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.1
bind_port = 6210
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL2
recon_cache_path = /var/cache/swift
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon object-server

[app:object-server]
use = egg:swift#object

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[object-replicator]
rsync_module = {replication_ip}::object{replication_port}

[object-reconstructor]

[object-updater]

[object-auditor]

[object-relinker]

  9. /etc/swift/account-server/2.conf

    [DEFAULT]
devices = /srv/2/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.2
bind_port = 6222
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL3
recon_cache_path = /var/cache/swift2
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon account-server

[app:account-server]
use = egg:swift#account

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[account-replicator]
rsync_module = {replication_ip}::account{replication_port}

[account-auditor]

[account-reaper]

  10. /etc/swift/container-server/2.conf

    [DEFAULT]
devices = /srv/2/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.2
bind_port = 6221
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL3
recon_cache_path = /var/cache/swift2
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon container-server

[app:container-server]
use = egg:swift#container

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[container-replicator]
rsync_module = {replication_ip}::container{replication_port}

[container-updater]

[container-auditor]

[container-sync]

[container-sharder]
auto_shard = true
rsync_module = {replication_ip}::container{replication_port}
# This is intentionally much smaller than the default of 1,000,000 so tests
# can run in a reasonable amount of time
shard_container_threshold = 100
# The probe tests make explicit assumptions about the batch sizes
shard_scanner_batch_size = 10
cleave_batch_size = 2

  11. /etc/swift/container-reconciler/2.conf

    [DEFAULT]
# swift_dir = /etc/swift
user = <your-user-name>
# You can specify default log routing here if you want:
# log_name = swift
log_facility = LOG_LOCAL3
# log_level = INFO
# log_address = /dev/log
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =

[container-reconciler]
# reclaim_age = 604800
# interval = 300
# request_tries = 3
processes = 4
process = 1

[pipeline:main]
pipeline = catch_errors proxy-logging cache proxy-server

[app:proxy-server]
use = egg:swift#proxy
# See proxy-server.conf-sample for options

[filter:cache]
use = egg:swift#memcache
# See proxy-server.conf-sample for options

[filter:proxy-logging]
use = egg:swift#proxy_logging

[filter:catch_errors]
use = egg:swift#catch_errors
# See proxy-server.conf-sample for options

  12. /etc/swift/object-server/2.conf

    [DEFAULT]
devices = /srv/2/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.2
bind_port = 6220
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL3
recon_cache_path = /var/cache/swift2
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon object-server

[app:object-server]
use = egg:swift#object

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[object-replicator]
rsync_module = {replication_ip}::object{replication_port}

[object-reconstructor]

[object-updater]

[object-auditor]

[object-relinker]

  13. /etc/swift/account-server/3.conf

    [DEFAULT]
devices = /srv/3/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.3
bind_port = 6232
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL4
recon_cache_path = /var/cache/swift3
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon account-server

[app:account-server]
use = egg:swift#account

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[account-replicator]
rsync_module = {replication_ip}::account{replication_port}

[account-auditor]

[account-reaper]

  14. /etc/swift/container-server/3.conf

    [DEFAULT]
devices = /srv/3/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.3
bind_port = 6231
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL4
recon_cache_path = /var/cache/swift3
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon container-server

[app:container-server]
use = egg:swift#container

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[container-replicator]
rsync_module = {replication_ip}::container{replication_port}

[container-updater]

[container-auditor]

[container-sync]

[container-sharder]
auto_shard = true
rsync_module = {replication_ip}::container{replication_port}
# This is intentionally much smaller than the default of 1,000,000 so tests
# can run in a reasonable amount of time
shard_container_threshold = 100
# The probe tests make explicit assumptions about the batch sizes
shard_scanner_batch_size = 10
cleave_batch_size = 2

  15. /etc/swift/container-reconciler/3.conf

    [DEFAULT]
# swift_dir = /etc/swift
user = <your-user-name>
# You can specify default log routing here if you want:
# log_name = swift
log_facility = LOG_LOCAL4
# log_level = INFO
# log_address = /dev/log
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =

[container-reconciler]
# reclaim_age = 604800
# interval = 300
# request_tries = 3
processes = 4
process = 2

[pipeline:main]
pipeline = catch_errors proxy-logging cache proxy-server

[app:proxy-server]
use = egg:swift#proxy
# See proxy-server.conf-sample for options

[filter:cache]
use = egg:swift#memcache
# See proxy-server.conf-sample for options

[filter:proxy-logging]
use = egg:swift#proxy_logging

[filter:catch_errors]
use = egg:swift#catch_errors
# See proxy-server.conf-sample for options

  16. /etc/swift/object-server/3.conf

    [DEFAULT]
devices = /srv/3/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.3
bind_port = 6230
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL4
recon_cache_path = /var/cache/swift3
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon object-server

[app:object-server]
use = egg:swift#object

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[object-replicator]
rsync_module = {replication_ip}::object{replication_port}

[object-reconstructor]

[object-updater]

[object-auditor]

[object-relinker]

  17. /etc/swift/account-server/4.conf

    [DEFAULT]
devices = /srv/4/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.4
bind_port = 6242
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL5
recon_cache_path = /var/cache/swift4
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon account-server

[app:account-server]
use = egg:swift#account

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[account-replicator]
rsync_module = {replication_ip}::account{replication_port}

[account-auditor]

[account-reaper]

  18. /etc/swift/container-server/4.conf

    [DEFAULT]
devices = /srv/4/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.4
bind_port = 6241
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL5
recon_cache_path = /var/cache/swift4
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon container-server

[app:container-server]
use = egg:swift#container

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[container-replicator]
rsync_module = {replication_ip}::container{replication_port}

[container-updater]

[container-auditor]

[container-sync]

[container-sharder]
auto_shard = true
rsync_module = {replication_ip}::container{replication_port}
# This is intentionally much smaller than the default of 1,000,000 so tests
# can run in a reasonable amount of time
shard_container_threshold = 100
# The probe tests make explicit assumptions about the batch sizes
shard_scanner_batch_size = 10
cleave_batch_size = 2

  19. /etc/swift/container-reconciler/4.conf

    [DEFAULT]
# swift_dir = /etc/swift
user = <your-user-name>
# You can specify default log routing here if you want:
# log_name = swift
log_facility = LOG_LOCAL5
# log_level = INFO
# log_address = /dev/log
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =

[container-reconciler]
# reclaim_age = 604800
# interval = 300
# request_tries = 3
processes = 4
process = 3

[pipeline:main]
pipeline = catch_errors proxy-logging cache proxy-server

[app:proxy-server]
use = egg:swift#proxy
# See proxy-server.conf-sample for options

[filter:cache]
use = egg:swift#memcache
# See proxy-server.conf-sample for options

[filter:proxy-logging]
use = egg:swift#proxy_logging

[filter:catch_errors]
use = egg:swift#catch_errors
# See proxy-server.conf-sample for options

  20. /etc/swift/object-server/4.conf

    [DEFAULT]
devices = /srv/4/node
mount_check = false
disable_fallocate = true
bind_ip = 127.0.0.4
bind_port = 6240
workers = 1
user = <your-user-name>
log_facility = LOG_LOCAL5
recon_cache_path = /var/cache/swift4
eventlet_debug = true

[pipeline:main]
pipeline = healthcheck recon object-server

[app:object-server]
use = egg:swift#object

[filter:recon]
use = egg:swift#recon

[filter:healthcheck]
use = egg:swift#healthcheck

[object-replicator]
rsync_module = {replication_ip}::object{replication_port}

[object-reconstructor]

[object-updater]

[object-auditor]

[object-relinker]

Setting up scripts for running Swift

  1. Copy the SAIO scripts for resetting the environment:

    mkdir -p $HOME/bin
cd $HOME/swift/doc; cp saio/bin/* $HOME/bin; cd -
chmod +x $HOME/bin/*

  2. Edit the $HOME/bin/resetswift script

    The template resetswift script looks like the following:

    #!/bin/bash

set -e

swift-init all kill
swift-orphans -a 0 -k KILL

# Remove the following line if you did not set up rsyslog for individual logging:
sudo find /var/log/swift -type f -exec rm -f {} \;
if cut -d' ' -f2 /proc/mounts | grep -q /mnt/sdb1 ; then
    sudo umount /mnt/sdb1
fi
# If you are using a loopback device set SAIO_BLOCK_DEVICE to "/srv/swift-disk"
sudo mkfs.xfs -f ${SAIO_BLOCK_DEVICE:-/dev/sdb1}
sudo mount /mnt/sdb1
sudo mkdir /mnt/sdb1/1 /mnt/sdb1/2 /mnt/sdb1/3 /mnt/sdb1/4
sudo chown ${USER}:${USER} /mnt/sdb1/*
mkdir -p /srv/1/node/sdb1 /srv/1/node/sdb5 \
         /srv/2/node/sdb2 /srv/2/node/sdb6 \
         /srv/3/node/sdb3 /srv/3/node/sdb7 \
         /srv/4/node/sdb4 /srv/4/node/sdb8
sudo rm -f /var/log/debug /var/log/messages /var/log/rsyncd.log /var/log/syslog
find /var/cache/swift* -type f -name *.recon -exec rm -f {} \;
if [ "`type -t systemctl`" == "file" ]; then
    sudo systemctl restart rsyslog
    sudo systemctl restart memcached
else
    sudo service rsyslog restart
    sudo service memcached restart
fi

    If you did not set up rsyslog for individual logging, remove the find /var/log/swift... line:

    sed -i "/find \/var\/log\/swift/d" $HOME/bin/resetswift

  3. Install the sample configuration file for running tests:

    cp $HOME/swift/test/sample.conf /etc/swift/test.conf

    The template test.conf looks like the following:

    [s3api_test]
# You just enable advanced compatibility features to pass all tests.  Add the
# following non-default options to the s3api section of your proxy-server.conf
# s3_acl = True
# check_bucket_owner = True
endpoint = http://127.0.0.1:8080
#ca_cert=/path/to/ca.crt
region = us-east-1
# First and second users should be account owners
access_key1 = test:tester
secret_key1 = testing
access_key2 = test:tester2
secret_key2 = testing2
# Third user should be unprivileged
access_key3 = test:tester3
secret_key3 = testing3

[func_test]
# Sample config for Swift with tempauth
auth_uri = http://127.0.0.1:8080/auth/v1.0
# Sample config for Swift with Keystone v2 API.
# For keystone v2 change auth_version to 2 and auth_prefix to /v2.0/.
# And "allow_account_management" should not be set "true".
#auth_version = 3
#auth_uri = http://localhost:5000/v3/

# Used by s3api functional tests, which don't contact auth directly
#s3_storage_url = http://127.0.0.1:8080/
#s3_region = us-east-1

# Primary functional test account (needs admin access to the account)
account = test
username = tester
password = testing
s3_access_key = test:tester
s3_secret_key = testing

# User on a second account (needs admin access to the account)
account2 = test2
username2 = tester2
password2 = testing2

# User on same account as first, but without admin access
username3 = tester3
password3 = testing3
# s3api requires the same account with the primary one and different users
# one swift owner:
s3_access_key2 = test:tester2
s3_secret_key2 = testing2
# one unprivileged:
s3_access_key3 = test:tester3
s3_secret_key3 = testing3

# Fourth user is required for keystone v3 specific tests.
# Account must be in a non-default domain.
#account4 = test4
#username4 = tester4
#password4 = testing4
#domain4 = test-domain

# Fifth user is required for service token-specific tests.
# The account must be different from the primary test account.
# The user must not have a group (tempauth) or role (keystoneauth) on
# the primary test account. The user must have a group/role that is unique
# and not given to the primary tester and is specified in the options
# <prefix>_require_group (tempauth) or <prefix>_service_roles (keystoneauth).
#account5 = test5
#username5 = tester5
#password5 = testing5

# The service_prefix option is used for service token-specific tests.
# If service_prefix or username5 above is not supplied, the tests are skipped.
# To set the value and enable the service token tests, look at the
# reseller_prefix option in /etc/swift/proxy-server.conf. There must be at
# least two prefixes. If not, add a prefix as follows (where we add SERVICE):
#     reseller_prefix = AUTH, SERVICE
# The service_prefix must match the <prefix> used in <prefix>_require_group
# (tempauth) or <prefix>_service_roles (keystoneauth); for example:
#    SERVICE_require_group = service
#    SERVICE_service_roles = service
# Note: Do not enable service token tests if the first prefix in
# reseller_prefix is the empty prefix AND the primary functional test
# account contains an underscore.
#service_prefix = SERVICE

# Sixth user is required for access control tests.
# Account must have a role for reseller_admin_role(keystoneauth).
#account6 = test
#username6 = tester6
#password6 = testing6

collate = C

# Only necessary if a pre-existing server uses self-signed certificate
insecure = no

# Tests that are dependent on domain_remap middleware being installed also
# require one of the domain_remap storage_domain values to be specified here,
# otherwise those tests will be skipped.
storage_domain =

[unit_test]
fake_syslog = False

[probe_test]
# check_server_timeout = 30
# subprocess_wait_timeout = 30
# validate_rsync = false
# proxy_base_url = http://localhost:8080

[swift-constraints]
# The functional test runner will try to use the constraint values provided in
# the swift-constraints section of test.conf.
#
# If a constraint value does not exist in that section, or because the
# swift-constraints section does not exist, the constraints values found in
# the /info API call (if successful) will be used.
#
# If a constraint value cannot be found in the /info results, either because
# the /info API call failed, or a value is not present, the constraint value
# used will fall back to those loaded by the constraints module at time of
# import (which will attempt to load /etc/swift/swift.conf, see the
# swift.common.constraints module for more information).
#
# Note that the cluster must have "sane" values for the test suite to pass
# (for some definition of sane).
#
#max_file_size = 5368709122
#max_meta_name_length = 128
#max_meta_value_length = 256
#max_meta_count = 90
#max_meta_overall_size = 4096
#max_header_size = 8192
#extra_header_count = 0
#max_object_name_length = 1024
#container_listing_limit = 10000
#account_listing_limit = 10000
#max_account_name_length = 256
#max_container_name_length = 256

# Newer swift versions default to strict cors mode, but older ones were the
# opposite.
#strict_cors_mode = true

Configure environment variables for Swift

  1. Add an environment variable for running tests below:

    echo "export SWIFT_TEST_CONFIG_FILE=/etc/swift/test.conf" >> $HOME/.bashrc

  2. Be sure that your PATH includes the bin directory:

    echo "export PATH=${PATH}:$HOME/bin" >> $HOME/.bashrc

  3. If you are using a loopback device for Swift Storage, add an environment var to substitute /dev/sdb1 with /srv/swift-disk:

    echo "export SAIO_BLOCK_DEVICE=/srv/swift-disk" >> $HOME/.bashrc

  4. If you are using a device other than /dev/sdb1 for Swift storage (for example, /dev/vdb1), add an environment var to substitute it:

    echo "export SAIO_BLOCK_DEVICE=/dev/vdb1" >> $HOME/.bashrc

  5. If you are using a location other than /tmp for Swift tmp data (for example, /mnt/tmp), add TMPDIR environment var to set it:

    export TMPDIR=/mnt/tmp
echo "export TMPDIR=/mnt/tmp" >> $HOME/.bashrc

  6. Source the above environment variables into your current environment:

    . $HOME/.bashrc

Constructing initial rings

  1. Construct the initial rings using the provided script:

    remakerings

    The remakerings script looks like the following:

    #!/bin/bash

set -e

cd /etc/swift

rm -f *.builder *.ring.gz backups/*.builder backups/*.ring.gz

swift-ring-builder object.builder create 10 3 1
swift-ring-builder object.builder add r1z1-127.0.0.1:6210/sdb1 1
swift-ring-builder object.builder add r1z2-127.0.0.2:6220/sdb2 1
swift-ring-builder object.builder add r1z3-127.0.0.3:6230/sdb3 1
swift-ring-builder object.builder add r1z4-127.0.0.4:6240/sdb4 1
swift-ring-builder object.builder rebalance
swift-ring-builder object-1.builder create 10 2 1
swift-ring-builder object-1.builder add r1z1-127.0.0.1:6210/sdb1 1
swift-ring-builder object-1.builder add r1z2-127.0.0.2:6220/sdb2 1
swift-ring-builder object-1.builder add r1z3-127.0.0.3:6230/sdb3 1
swift-ring-builder object-1.builder add r1z4-127.0.0.4:6240/sdb4 1
swift-ring-builder object-1.builder rebalance
swift-ring-builder object-2.builder create 10 6 1
swift-ring-builder object-2.builder add r1z1-127.0.0.1:6210/sdb1 1
swift-ring-builder object-2.builder add r1z1-127.0.0.1:6210/sdb5 1
swift-ring-builder object-2.builder add r1z2-127.0.0.2:6220/sdb2 1
swift-ring-builder object-2.builder add r1z2-127.0.0.2:6220/sdb6 1
swift-ring-builder object-2.builder add r1z3-127.0.0.3:6230/sdb3 1
swift-ring-builder object-2.builder add r1z3-127.0.0.3:6230/sdb7 1
swift-ring-builder object-2.builder add r1z4-127.0.0.4:6240/sdb4 1
swift-ring-builder object-2.builder add r1z4-127.0.0.4:6240/sdb8 1
swift-ring-builder object-2.builder rebalance
swift-ring-builder container.builder create 10 3 1
swift-ring-builder container.builder add r1z1-127.0.0.1:6211/sdb1 1
swift-ring-builder container.builder add r1z2-127.0.0.2:6221/sdb2 1
swift-ring-builder container.builder add r1z3-127.0.0.3:6231/sdb3 1
swift-ring-builder container.builder add r1z4-127.0.0.4:6241/sdb4 1
swift-ring-builder container.builder rebalance
swift-ring-builder account.builder create 10 3 1
swift-ring-builder account.builder add r1z1-127.0.0.1:6212/sdb1 1
swift-ring-builder account.builder add r1z2-127.0.0.2:6222/sdb2 1
swift-ring-builder account.builder add r1z3-127.0.0.3:6232/sdb3 1
swift-ring-builder account.builder add r1z4-127.0.0.4:6242/sdb4 1
swift-ring-builder account.builder rebalance

    You can expect the output from this command to produce the following. Note that 3 object rings are created in order to test storage policies and EC in the SAIO environment. The EC ring is the only one with all 8 devices. There are also two replication rings, one for 3x replication and another for 2x replication, but those rings only use 4 devices:

    Device d0r1z1-127.0.0.1:6210R127.0.0.1:6210/sdb1_"" with 1.0 weight got id 0
Device d1r1z2-127.0.0.2:6220R127.0.0.2:6220/sdb2_"" with 1.0 weight got id 1
Device d2r1z3-127.0.0.3:6230R127.0.0.3:6230/sdb3_"" with 1.0 weight got id 2
Device d3r1z4-127.0.0.4:6240R127.0.0.4:6240/sdb4_"" with 1.0 weight got id 3
Reassigned 3072 (300.00%) partitions. Balance is now 0.00.  Dispersion is now 0.00
Device d0r1z1-127.0.0.1:6210R127.0.0.1:6210/sdb1_"" with 1.0 weight got id 0
Device d1r1z2-127.0.0.2:6220R127.0.0.2:6220/sdb2_"" with 1.0 weight got id 1
Device d2r1z3-127.0.0.3:6230R127.0.0.3:6230/sdb3_"" with 1.0 weight got id 2
Device d3r1z4-127.0.0.4:6240R127.0.0.4:6240/sdb4_"" with 1.0 weight got id 3
Reassigned 2048 (200.00%) partitions. Balance is now 0.00.  Dispersion is now 0.00
Device d0r1z1-127.0.0.1:6210R127.0.0.1:6210/sdb1_"" with 1.0 weight got id 0
Device d1r1z1-127.0.0.1:6210R127.0.0.1:6210/sdb5_"" with 1.0 weight got id 1
Device d2r1z2-127.0.0.2:6220R127.0.0.2:6220/sdb2_"" with 1.0 weight got id 2
Device d3r1z2-127.0.0.2:6220R127.0.0.2:6220/sdb6_"" with 1.0 weight got id 3
Device d4r1z3-127.0.0.3:6230R127.0.0.3:6230/sdb3_"" with 1.0 weight got id 4
Device d5r1z3-127.0.0.3:6230R127.0.0.3:6230/sdb7_"" with 1.0 weight got id 5
Device d6r1z4-127.0.0.4:6240R127.0.0.4:6240/sdb4_"" with 1.0 weight got id 6
Device d7r1z4-127.0.0.4:6240R127.0.0.4:6240/sdb8_"" with 1.0 weight got id 7
Reassigned 6144 (600.00%) partitions. Balance is now 0.00.  Dispersion is now 0.00
Device d0r1z1-127.0.0.1:6211R127.0.0.1:6211/sdb1_"" with 1.0 weight got id 0
Device d1r1z2-127.0.0.2:6221R127.0.0.2:6221/sdb2_"" with 1.0 weight got id 1
Device d2r1z3-127.0.0.3:6231R127.0.0.3:6231/sdb3_"" with 1.0 weight got id 2
Device d3r1z4-127.0.0.4:6241R127.0.0.4:6241/sdb4_"" with 1.0 weight got id 3
Reassigned 3072 (300.00%) partitions. Balance is now 0.00.  Dispersion is now 0.00
Device d0r1z1-127.0.0.1:6212R127.0.0.1:6212/sdb1_"" with 1.0 weight got id 0
Device d1r1z2-127.0.0.2:6222R127.0.0.2:6222/sdb2_"" with 1.0 weight got id 1
Device d2r1z3-127.0.0.3:6232R127.0.0.3:6232/sdb3_"" with 1.0 weight got id 2
Device d3r1z4-127.0.0.4:6242R127.0.0.4:6242/sdb4_"" with 1.0 weight got id 3
Reassigned 3072 (300.00%) partitions. Balance is now 0.00.  Dispersion is now 0.00

  2. Read more about Storage Policies and your SAIO Adding Storage Policies to an Existing SAIO

Testing Swift

  1. Verify the unit tests run:

    $HOME/swift/.unittests

    Note that the unit tests do not require any Swift daemons running.

  2. Start the “main” Swift daemon processes (proxy, account, container, and object):

    startmain

    (The “Unable to increase file descriptor limit.  Running as non-root?” warnings are expected and ok.)

    The startmain script looks like the following:

    #!/bin/bash

set -e

swift-init main start

  3. Get an X-Storage-Url and X-Auth-Token:

    curl -v -H 'X-Storage-User: test:tester' -H 'X-Storage-Pass: testing' http://127.0.0.1:8080/auth/v1.0

  4. Check that you can GET account:

    curl -v -H 'X-Auth-Token: <token-from-x-auth-token-above>' <url-from-x-storage-url-above>

  5. Check that swift command provided by the python-swiftclient package works:

    swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing stat

  6. Verify the functional tests run:

    $HOME/swift/.functests

    (Note: functional tests will first delete everything in the configured accounts.)

  7. Verify the probe tests run:

    $HOME/swift/.probetests

    (Note: probe tests will reset your environment as they call resetswift for each test.)

Debugging Issues

If all doesn’t go as planned, and tests fail, or you can’t auth, or something doesn’t work, here are some good starting places to look for issues:

  1. Everything is logged using system facilities – usually in /var/log/syslog, but possibly in /var/log/messages on e.g. Fedora – so that is a good first place to look for errors (most likely python tracebacks).

  2. Make sure all of the server processes are running. For the base functionality, the Proxy, Account, Container, and Object servers should be running.

  3. If one of the servers are not running, and no errors are logged to syslog, it may be useful to try to start the server manually, for example: swift-object-server /etc/swift/object-server/1.conf will start the object server. If there are problems not showing up in syslog, then you will likely see the traceback on startup.

  4. If you need to, you can turn off syslog for unit tests. This can be useful for environments where /dev/log is unavailable, or which cannot rate limit (unit tests generate a lot of logs very quickly). Open the file SWIFT_TEST_CONFIG_FILE points to, and change the value of fake_syslog to True.

  5. If you encounter a 401 Unauthorized when following Step 12 where you check that you can GET account, use sudo service memcached status and check if memcache is running. If memcache is not running, start it using sudo service memcached start. Once memcache is running, rerun GET account.

Known Issues

Listed here are some “gotcha’s” that you may run into when using or testing your SAIO:

  1. fallocate_reserve - in most cases a SAIO doesn’t have a very large XFS partition so having fallocate enabled and fallocate_reserve set can cause issues, specifically when trying to run the functional tests. For this reason fallocate has been turned off on the object-servers in the SAIO. If you want to play with the fallocate_reserve settings then know that functional tests will fail unless you change the max_file_size constraint to something more reasonable then the default (5G). Ideally you’d make it 1/4 of your XFS file system size so the tests can pass.