ETSI NFV-SOL VNF error-handling¶
This document describes how to error-handling VNF in Tacker v1 API.
Note
This is a document for Tacker v1 API. See ETSI NFV-SOL VNF error-handling for Tacker v2 API.
Prerequisites¶
The following packages should be installed:
tacker
python-tackerclient
A default VIM should be registered according to VIM Management.
The VNF Package(sample_vnf_package_csar.zip) used below is prepared by referring to VNF Package.
The procedure of prepare for healing operation that from “register VIM” to “Instantiate VNF”, basically refer to ETSI NFV-SOL VNF Deployment as VM with TOSCA or ETSI NFV-SOL VNF Deployment as VM with LCM Operation User Data.
This procedure uses an example using the sample VNF package.
VNF Error-handling Procedures¶
As mentioned in Prerequisites, the VNF must be created before performing error-handling.
Details of CLI commands are described in VNF Lifecycle Management with v1 Tacker.
There are some operations to error-handling VNF.
Rollback VNF lifecycle management operation
Fail VNF lifecycle management operation
Retry VNF lifecycle management operation
In order to execute error-handling, it is necessary to specify VNF_LCM_OP_OCC_ID, which is the ID for the target LCM operation. First, the method of specifying the ID will be described.
Identify VNF_LCM_OP_OCC_ID¶
The VNF_LCM_OP_OCC_ID can be obtained via CLI.
Details of CLI commands are described in VNF Lifecycle Management with v1 Tacker.
Before checking the “VNF_LCM_OP_OCC_ID”, you should get VNF_INSTANCE_ID first.
$ openstack vnflcm op list
Result:
$ openstack vnflcm op list
+--------------------------------------+-----------------+--------------------------------------+-------------+
| ID | Operation State | VNF Instance ID | Operation |
+--------------------------------------+-----------------+--------------------------------------+-------------+
| c7afb90a-351b-4d33-a945-8f937deeadb4 | FAILED_TEMP | d45ae5cb-121b-4420-bc97-6a00f5fa63b6 | INSTANTIATE |
+--------------------------------------+-----------------+--------------------------------------+-------------+
Error-handling can be executed only when operationState is FAILED_TMP.
If the Subscription is registered, the above operation trigger that caused the FAILED_TEMP send a ‘Notification’ to the callbackUri of the Subscription.
vnfLcmOpOccId included in this ‘Notification’ corresponds to VNF_LCM_OP_OCC_ID.
See VNF LCM v1 API for details on the APIs used here.
Rollback VNF LCM Operation¶
LCM Operation |
Description of Rollback |
Precondition |
Postcondition |
|---|---|---|---|
Instantiate |
VNFM removes all VMs and resources.
e.g. Tacker executes Heat stack-delete for deletion of the target VM.
|
FAILED_TEMP |
ROLLED_BACK or FAILED_TEMP |
Scale-out |
VNFM reverts changes of VMs and resources specified in the middle of scale-out operation.
As a result, the oldest VNFc(VM) is deleted.
e.g. Tacker reverts desired_capacity and executes Heat stack-update.
|
FAILED_TEMP |
ROLLED_BACK or FAILED_TEMP |
This manual describes the following operations as use cases for rollback operations.
“Instantiate VNF” fails
Rollback VNF lifecycle management operation
Delete VNF
As shown below, if “Instantiate VNF” fails, “Delete VNF” cannot be executed without executing “Rollback VNF lifecycle management operation”.
$ openstack vnflcm delete VNF_INSTANCE_ID
Result:
Failed to delete vnf instance with ID 'd45ae5cb-121b-4420-bc97-6a00f5fa63b6': Vnf d45ae5cb-121b-4420-bc97-6a00f5fa63b6 in status ERROR. Cannot delete while the vnf is in this state.
Failed to delete 1 of 1 vnf instances.
Therefore, “Rollback VNF lifecycle management operation” with the following CLI command.
$ openstack vnflcm op rollback VNF_LCM_OP_OCC_ID
Result:
Rollback request for LCM operation c7afb90a-351b-4d33-a945-8f937deeadb4 has been accepted
If “Rollback VNF lifecycle management operation” is successful, then “Delete VNF” is also successful.
$ openstack vnflcm delete VNF_INSTANCE_ID
Result:
Vnf instance 'd45ae5cb-121b-4420-bc97-6a00f5fa63b6' is deleted successfully
Fail VNF LCM Operation¶
LCM Operation |
Description of Fail |
Precondition |
Postcondition |
|---|---|---|---|
Instantiate |
Tacker simply changes LCM operation state to “FAILED” on Tacker-DB. |
FAILED_TEMP |
FAILED |
Terminate |
Tacker simply changes LCM operation state to “FAILED” on Tacker-DB. |
FAILED_TEMP |
FAILED |
Heal |
Tacker simply changes LCM operation state to “FAILED” on Tacker-DB. |
FAILED_TEMP |
FAILED |
Scale |
Tacker simply changes LCM operation state to “FAILED” on Tacker-DB. |
FAILED_TEMP |
FAILED |
Modify |
Tacker simply changes LCM operation state to “FAILED” on Tacker-DB. |
FAILED_TEMP |
FAILED |
Change external connectivity |
Tacker simply changes LCM operation state to “FAILED” on Tacker-DB. |
FAILED_TEMP |
FAILED |
This manual describes the following operations as use cases for fail operations.
“Instantiate VNF” fails
Fail VNF lifecycle management operation
Delete VNF
As shown below, if “Instantiate VNF” fails, “Delete VNF” cannot be executed after executing “Fail VNF lifecycle management operation”.
$ openstack vnflcm delete VNF_INSTANCE_ID
Result:
Failed to delete vnf instance with ID 'd45ae5cb-121b-4420-bc97-6a00f5fa63b6': Vnf d45ae5cb-121b-4420-bc97-6a00f5fa63b6 in status ERROR. Cannot delete while the vnf is in this state.
Failed to delete 1 of 1 vnf instances.
Therefore, “Fail VNF lifecycle management operation” with the following CLI command.
$ openstack vnflcm op fail VNF_LCM_OP_OCC_ID
Result:
+-------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Field | Value |
+-------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Error | { |
| | "title": "", |
| | "status": 500, |
| | "detail": "ProblemDetails(created_at=<?>,deleted=0,deleted_at=<?>,detail='Vnf instantiation wait failed for vnf d45ae5cb-121b-4420-bc97-6a00f5fa63b6, error: VNF Create Resource CREATE failed: ResourceInError: |
| | resources.VDU1.resources.ril4bssciahp.resources.VDU1: Went to status ERROR due to \"Message: Build of instance 6dacc4a4-948f-4f40-97cf-2caeecbba013 aborted: privsep helper command exited non-zero (1), Code: |
| | 500\"',status=500,title='',updated_at=<?>)" |
| | } |
| ID | c7afb90a-351b-4d33-a945-8f937deeadb4 |
| Is Automatic Invocation | False |
| Is Cancel Pending | False |
| Links | { |
| | "self": { |
| | "href": "http://localhost:9890/vnflcm/v1/vnf_lcm_op_occs/c7afb90a-351b-4d33-a945-8f937deeadb4" |
| | }, |
| | "vnfInstance": { |
| | "href": "http://localhost:9890/vnflcm/v1/vnf_instances/d45ae5cb-121b-4420-bc97-6a00f5fa63b6" |
| | }, |
| | "retry": { |
| | "href": "http://localhost:9890/vnflcm/v1/vnf_lcm_op_occs/c7afb90a-351b-4d33-a945-8f937deeadb4/retry" |
| | }, |
| | "rollback": { |
| | "href": "http://localhost:9890/vnflcm/v1/vnf_lcm_op_occs/c7afb90a-351b-4d33-a945-8f937deeadb4/rollback" |
| | }, |
| | "grant": { |
| | "href": "http://localhost:9890/vnflcm/v1/vnf_lcm_op_occs/c7afb90a-351b-4d33-a945-8f937deeadb4/grant" |
| | }, |
| | "fail": { |
| | "href": "http://localhost:9890/vnflcm/v1/vnf_lcm_op_occs/c7afb90a-351b-4d33-a945-8f937deeadb4/fail" |
| | } |
| | } |
| Operation | INSTANTIATE |
| Operation State | FAILED |
| Start Time | 2023-12-27 07:05:59+00:00 |
| State Entered Time | 2024-01-18 01:40:55.105358+00:00 |
| VNF Instance ID | d45ae5cb-121b-4420-bc97-6a00f5fa63b6 |
| grantId | None |
| operationParams | "{\"flavourId\": \"simple\", \"instantiationLevelId\": \"instantiation_level_1\", \"extVirtualLinks\": [{\"id\": \"91bcff6d-4703-4ba9-b1c2-009e6db92a9c\", \"resourceId\": \"3019b1e7-99d8-4748-97ac-104922bc78d9\", |
| | \"vimConnectionId\": \"79a97d01-e5f3-4eaa-b2bc-8f513ecb8a56\", \"extCps\": [{\"cpdId\": \"VDU1_CP1\", \"cpConfig\": [{\"linkPortId\": \"6b7c0b3a-cc2d-4b94-9f6f-81df69a7cc2f\"}]}, {\"cpdId\": \"VDU2_CP1\", \"cpConfig\": |
| | [{\"linkPortId\": \"02d867e7-b955-4b4a-b92f-c78c7ede63bf\"}]}], \"extLinkPorts\": [{\"id\": \"6b7c0b3a-cc2d-4b94-9f6f-81df69a7cc2f\", \"resourceHandle\": {\"vimConnectionId\": \"79a97d01-e5f3-4eaa-b2bc-8f513ecb8a56\", |
| | \"resourceId\": \"972a375d-921f-46f5-bfdb-19af95fc49e1\"}}, {\"id\": \"02d867e7-b955-4b4a-b92f-c78c7ede63bf\", \"resourceHandle\": {\"vimConnectionId\": \"79a97d01-e5f3-4eaa-b2bc-8f513ecb8a56\", \"resourceId\": |
| | \"b853b5c5-cd97-4dfb-8750-cac6e5c62477\"}}]}, {\"id\": \"a96d2f5b-c01a-48e1-813c-76132965042c\", \"resourceId\": \"589a045a-65d9-4f4d-a9b3-35aa655374d0\", \"vimConnectionId\": \"79a97d01-e5f3-4eaa-b2bc-8f513ecb8a56\", |
| | \"extCps\": [{\"cpdId\": \"VDU1_CP2\", \"cpConfig\": [{\"cpProtocolData\": [{\"layerProtocol\": \"IP_OVER_ETHERNET\", \"ipOverEthernet\": {\"ipAddresses\": [{\"type\": \"IPV4\", \"fixedAddresses\": [\"22.22.1.10\"], |
| | \"subnetId\": \"d290cae3-0dbc-44a3-a043-1a50ded04a64\"}]}}]}]}, {\"cpdId\": \"VDU2_CP2\", \"cpConfig\": [{\"cpProtocolData\": [{\"layerProtocol\": \"IP_OVER_ETHERNET\", \"ipOverEthernet\": {\"ipAddresses\": [{\"type\": |
| | \"IPV4\", \"fixedAddresses\": [\"22.22.1.20\"], \"subnetId\": \"d290cae3-0dbc-44a3-a043-1a50ded04a64\"}]}}]}]}]}], \"extManagedVirtualLinks\": [{\"id\": \"8f9d8da0-2386-4f00-bbb0-860f50d32a5a\", \"vnfVirtualLinkDescId\": |
| | \"internalVL1\", \"resourceId\": \"0e498d08-ed3a-4212-83e0-1b6808f6fcb6\"}, {\"id\": \"11d68761-aab7-419c-955c-0c6497f13692\", \"vnfVirtualLinkDescId\": \"internalVL2\", \"resourceId\": \"38a8d4ba- |
| | ac1b-41a2-a92b-ff2a3e5e9b12\"}], \"vimConnectionInfo\": [{\"id\": \"79a97d01-e5f3-4eaa-b2bc-8f513ecb8a56\", \"vimType\": \"ETSINFV.OPENSTACK_KEYSTONE.V_2\", \"vimConnectionId\": \"79a97d01-e5f3-4eaa-b2bc-8f513ecb8a56\", |
| | \"interfaceInfo\": {\"endpoint\": \"http://127.0.0.1/identity\"}, \"accessInfo\": {\"username\": \"nfv_user\", \"region\": \"RegionOne\", \"password\": \"devstack\", \"tenant\": \"1994d69783d64c00aadab564038c2fd7\"}}], |
| | \"additionalParams\": {\"lcm-operation-user-data\": \"./UserData/lcm_user_data.py\", \"lcm-operation-user-data-class\": \"SampleUserData\"}}" |
| resourceChanges | {} |
+-------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
If “Fail VNF lifecycle management operation” is successful, then “Delete VNF” is also successful.
$ openstack vnflcm delete VNF_INSTANCE_ID
Result:
Vnf instance 'd45ae5cb-121b-4420-bc97-6a00f5fa63b6' is deleted successfully
Retry VNF LCM Operation¶
LCM Operation |
Description of Fail |
Precondition |
Postcondition |
|---|---|---|---|
Instantiate |
VNFM retries a Instantiate operation. |
FAILED_TEMP |
COMPLETED or FAILED_TEMP |
Terminate |
VNFM retries a Terminate operation. |
FAILED_TEMP |
COMPLETED or FAILED_TEMP |
Heal |
VNFM retries a Heal operation. |
FAILED_TEMP |
COMPLETED or FAILED_TEMP |
Scale |
VNFM retries a Scale operation. |
FAILED_TEMP |
COMPLETED or FAILED_TEMP |
Modify |
VNFM retries a Modify operation. |
FAILED_TEMP |
COMPLETED or FAILED_TEMP |
Change external connectivity |
VNFM retries a Change external connectivity operation. |
FAILED_TEMP |
COMPLETED or FAILED_TEMP |
This manual describes the following operations as use cases for retry operations.
“Instantiate VNF” fails
Retry VNF lifecycle management operation
As shown below, if “Instantiate VNF” fails, If you want re-execute previous(failed) operation , you execute “Retry” operation.
Therefore, “Retry VNF lifecycle management operation” with the following CLI command.
$ openstack vnflcm op retry VNF_LCM_OP_OCC_ID
Result:
Retry request for LCM operation c7afb90a-351b-4d33-a945-8f937deeadb4 has been accepted
If “Retry VNF lifecycle management operation” is successful, then another LCM can be operational.
