About Group

For now, the validations are grouped by the deployment stage they should be run on. A validation can belong to multiple groups.

Adding a new group

To add a new group, you will need to edit the groups.yaml file located in the root of the TripleO Validations directory:

...
pre-update:
  - description: >-
      Validations which try to validate your OpenStack deployment before you
      update it.
...

And a new entry in the sphinx documentation index doc/source/index.rst:

Existing validations
====================

.. toctree::
  :maxdepth: 2

  validations-no-op-details
  validations-prep-details
  validations-pre-introspection-details
  validations-pre-deployment-details
  validations-post-deployment-details
...

Group list

Here is a list of groups and their associated validations.

Backup-and-restore:

Validations which should be run to validate your OpenStack deployment before you backup it and after restore it.

• ceph-health: Check the status of the ceph cluster

• container-status: Ensure container status

• healthcheck-service-status: Healthcheck systemd services Check

• image-serve: Verify image-serve service is working and answering

• neutron-sanity-check: Neutron Sanity Check

• nova-status: Nova Status Upgrade Check

• pacemaker-status: Check the status of the pacemaker cluster

• undercloud-disabled-services: Verify undercloud services state before running update or upgrade

• undercloud-service-status: Verify undercloud services state before running update or upgrade

No-op:

Validations which will run a no-op operation to verify that the workflow is working as it supposed to, it will run in both the Undercloud and Overcloud Nodes.

Openshift-on-openstack:

Validations which will check that the environment meets the requirements to be able to deploy OpenShift on OpenStack.

• openshift-hw-requirements: Check resources for an OpenShift on OpenStack deployment

• openshift-nw-requirements: Check network requirements for an OpenShift on OpenStack deployment

Post-ceph:

Validations to run on overcloud after deploying OpenStack with Ceph.

• ceph-health: Check the status of the ceph cluster

Post-deployment:

Validations which should be executed after the Overcloud deployment has finished.

• ceph-health: Check the status of the ceph cluster

• container-status: Ensure container status

• containerized-undercloud-docker: Verify docker containers are up and ports are open

• controller-token: Verify that keystone admin token is disabled

• controller-ulimits: Check controller ulimits

• healthcheck-service-status: Healthcheck systemd services Check

• image-serve: Verify image-serve service is working and answering

• mysql-open-files-limit: MySQL Open Files Limit

• neutron-sanity-check: Neutron Sanity Check

• nfv-ovsdpdk-counter-stat-validation: NFV OvS DPDK Counter Stat Validations

• nfv-ovsdpdk-zero-packet-loss-check: NFV OvS DPDK Zero Packet Loss Validations

• no-op-firewall-nova-driver: Verify NoOpFirewallDriver is set in Nova

• nova-event-callback: Nova Event Callback Configuration Check

• nova-svirt: Check nova sVirt support

• openstack-endpoints: Check connectivity to various OpenStack services

• oslo-config-validator: Openstack services configuration validation

• overcloud-service-status: Verify overcloud services state after running a deployment or an update

• ovs-dpdk-pmd-cpus-check: Validates OVS DPDK PMD cores from all NUMA nodes.

• pacemaker-status: Check the status of the pacemaker cluster

• rabbitmq-limits: Rabbitmq limits

• stonith-exists: Validate stonith devices

• tls-everywhere-post-deployment: Confirm that overcloud nodes are setup correctly

• tripleo-haproxy: TripleO HAProxy configuration

Post-overcloud-converge:

Validations which verify that the overcloud is in a correct state after running overcloud upgrade converge command.

• overcloud-service-status: Verify overcloud services state after running a deployment or an update

Post-overcloud-prepare:

Validations which verify that the overcloud is in a correct state after running overcloud upgrade prepare step.

Post-overcloud-upgrade:

Validations which verify that the overcloud is in a correct state before running overcloud upgrade run command.

• overcloud-service-status: Verify overcloud services state after running a deployment or an update

Post-system-upgrade:

Validations which verify that the operating system upgrade went fine in the target node.

• oslo-config-validator: Openstack services configuration validation

Post-undercloud-upgrade:

Validations which verify that the undercloud is in a correct state after upgrading.

Post-update:

Validations which should be run to validate your OpenStack deployment after you update it.

• openstack-endpoints: Check connectivity to various OpenStack services

• oslo-config-validator: Openstack services configuration validation

• undercloud-disabled-services: Verify undercloud services state before running update or upgrade

• undercloud-service-status: Verify undercloud services state before running update or upgrade

Post-upgrade:

Validations which try to validate your OpenStack deployment after you upgrade it.

• container-status: Ensure container status

• image-serve: Verify image-serve service is working and answering

• nova-svirt: Check nova sVirt support

• openstack-endpoints: Check connectivity to various OpenStack services

• oslo-config-validator: Openstack services configuration validation

• overcloud-service-status: Verify overcloud services state after running a deployment or an update

• stack-health: Stack Health Check

• undercloud-disabled-services: Verify undercloud services state before running update or upgrade

• undercloud-service-status: Verify undercloud services state before running update or upgrade

Pre-ceph:

Validations to run on undercloud before deploying OpenStack with Ceph.

• ceph-ansible-installed: Check if ceph-ansible is installed on the undercloud

• ceph-dependencies-installed: Check if Ceph dependencies are installed

Pre-deployment:

Validations which should be executed before **openstack overcloud deploy*.*

• ceilometerdb-size: Events Database Size Check (DEPRECATED)

• ceph-ansible-installed: Check if ceph-ansible is installed on the undercloud

• ceph-dependencies-installed: Check if Ceph dependencies are installed

• default-node-count: Verify hypervisor statistics

• dhcp-provisioning: DHCP on the Provisioning Network

• ironic-boot-configuration: Check Ironic boot configuration

• network-environment: Validate the Heat environment file for network configuration

• node-disks: Check node disk configuration

• switch-vlans: Compare switch port VLANs to VLANs in nic config

• system-encoding: System encoding

• tls-everywhere-pre-deployment: Confirm undercloud is setup correctly prior to overcloud deploy

• undercloud-debug: Undercloud Services Debug Check

• undercloud-heat-purge-deleted: Verify heat-manage purge_deleted is enabled in crontab

• undercloud-process-count: Check the number of OpenStack processes on undercloud

Pre-introspection:

Validations which should be run before the nodes introspection using Ironic Inspector.

• check-network-gateway: Check network_gateway on the provisioning network

• ctlplane-ip-range: Check the number of IP addresses available for the overcloud nodes

• dhcp-introspection: DHCP on the Introspection Network

• undercloud-disk-space: Verify undercloud fits the disk space requirements

• undercloud-neutron-sanity-check: Undercloud Neutron Sanity Check

• undercloud-tokenflush: Verify token_flush is enabled in keystone users crontab

Pre-overcloud-converge:

Set of validations that check the right content for the templates passed to the overcloud upgrad converge step.

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

Pre-overcloud-prepare:

Set of validations that check the right content for the templates passed to the overcloud upgrade prepare step.

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

Pre-overcloud-upgrade:

Validations which verify that the overcloud is in a correct state before running overcloud upgrade run command.

• check-rhsm-version: Verify that the RSHM version configured is the right one

• check-uc-hostname: Check DockerInsecureRegistryAddress parameter points to correct UC hostname

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

Pre-system-upgrade:

Validations which verify that the operating system can be upgraded in the target node

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

Pre-undercloud-upgrade:

Validations which verify that the undercloud is in a correct state before upgrading.

• check-rhsm-version: Verify that the RSHM version configured is the right one

• check-undercloud-conf: Verify undercloud.conf correctness

Pre-update:

Validations which should be run to validate your OpenStack deployment before you update it.

• check-for-dangling-images: Check for podman dangling images

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

• container-status: Ensure container status

• nova-libvirt-version: Check correctness of installed nova-libvirt version

• openstack-endpoints: Check connectivity to various OpenStack services

• repos: Check correctness of current repositories

• system-encoding: System encoding

• undercloud-disabled-services: Verify undercloud services state before running update or upgrade

• undercloud-heat-purge-deleted: Verify heat-manage purge_deleted is enabled in crontab

• undercloud-ipa-server-check: Verify that the IPA server has the right permissions and ACI

• undercloud-service-status: Verify undercloud services state before running update or upgrade

Pre-update-converge:

Validations which should be run to verfiy containers and services are ready for pre-deployment.

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

Pre-update-prepare:

Validations which should be run to verify undercloud updated correctly.

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

Pre-update-run:

Validations which should be run to verify image and registration of the overcloud nodes.

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

Pre-upgrade:

Validations which try to validate your OpenStack deployment before you upgrade it.

• collect-flavors-and-verify-profiles: Collect and verify role flavors

• compute-tsx: RHEL8.x kernel flag for Compute nodes validation

• container-status: Ensure container status

• containerized-undercloud-docker: Verify docker containers are up and ports are open

• image-serve: Verify image-serve service is working and answering

• ironic-boot-configuration: Check Ironic boot configuration

• node-health: Node health check

• nova-libvirt-version: Check correctness of installed nova-libvirt version

• nova-status: Nova Status Upgrade Check

• openstack-endpoints: Check connectivity to various OpenStack services

• repos: Check correctness of current repositories

• stack-health: Stack Health Check

• system-encoding: System encoding

• tripleo-latest-packages-version: Check if latest version of TripleO packages is installed

• undercloud-disabled-services: Verify undercloud services state before running update or upgrade

• undercloud-disk-space-pre-upgrade: Verify undercloud fits the disk space requirements to perform an upgrade

• undercloud-heat-purge-deleted: Verify heat-manage purge_deleted is enabled in crontab

• undercloud-ipa-server-check: Verify that the IPA server has the right permissions and ACI

• undercloud-service-status: Verify undercloud services state before running update or upgrade

Prep:

Validations check the hardware configuration of the Undercloud node and should be run before **openstack undercloud install*.*

• check-undercloud-conf: Verify undercloud.conf correctness

• tls-everywhere-prep: Confirm that undercloud is setup to register to IdM

• undercloud-disk-space: Verify undercloud fits the disk space requirements