This section describes how to install and configure the Database service for Red Hat Enterprise Linux 7 and CentOS 7.
Before you install and configure the Database service, you must create a database, service credentials, and API endpoints.
To create the database, complete these steps:
Use the database access client to connect to the database
server as the root
user:
$ mysql -u root -p
Create the trove
database:
CREATE DATABASE trove;
Grant proper access to the trove
database:
GRANT ALL PRIVILEGES ON trove.* TO 'trove'@'localhost' \
IDENTIFIED BY 'TROVE_DBPASS';
GRANT ALL PRIVILEGES ON trove.* TO 'trove'@'%' \
IDENTIFIED BY 'TROVE_DBPASS';
Replace TROVE_DBPASS
with a suitable password.
Exit the database access client.
Source the admin
credentials to gain access to
admin-only CLI commands:
$ . admin-openrc
To create the service credentials, complete these steps:
Create the trove
user:
$ openstack user create --domain default --password-prompt trove
User Password:
Repeat User Password:
+-----------+-----------------------------------+
| Field | Value |
+-----------+-----------------------------------+
| domain_id | default |
| enabled | True |
| id | ca2e175b851943349be29a328cc5e360 |
| name | trove |
+-----------+-----------------------------------+
Add the admin
role to the trove
user:
$ openstack role add --project service --user trove admin
Note
This command provides no output.
Create the trove
service entity:
$ openstack service create --name trove \
--description "Database" database
+-------------+-----------------------------------+
| Field | Value |
+-------------+-----------------------------------+
| description | Database |
| enabled | True |
| id | 727841c6f5df4773baa4e8a5ae7d72eb |
| name | trove |
| type | database |
+-------------+-----------------------------------+
Create the Database service API endpoints:
$ openstack endpoint create --region RegionOne \
database public http://controller:8779/v1.0/%\(tenant_id\)s
+--------------+----------------------------------------------+
| Field | Value |
+--------------+----------------------------------------------+
| enabled | True |
| id | 3f4dab34624e4be7b000265f25049609 |
| interface | public |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 727841c6f5df4773baa4e8a5ae7d72eb |
| service_name | trove |
| service_type | database |
| url | http://controller:8779/v1.0/%\(tenant_id\)s |
+--------------+----------------------------------------------+
$ openstack endpoint create --region RegionOne \
database internal http://controller:8779/v1.0/%\(tenant_id\)s
+--------------+----------------------------------------------+
| Field | Value |
+--------------+----------------------------------------------+
| enabled | True |
| id | 9489f78e958e45cc85570fec7e836d98 |
| interface | internal |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 727841c6f5df4773baa4e8a5ae7d72eb |
| service_name | trove |
| service_type | database |
| url | http://controller:8779/v1.0/%\(tenant_id\)s |
+--------------+----------------------------------------------+
$ openstack endpoint create --region RegionOne \
database admin http://controller:8779/v1.0/%\(tenant_id\)s
+--------------+----------------------------------------------+
| Field | Value |
+--------------+----------------------------------------------+
| enabled | True |
| id | 76091559514b40c6b7b38dde790efe99 |
| interface | admin |
| region | RegionOne |
| region_id | RegionOne |
| service_id | 727841c6f5df4773baa4e8a5ae7d72eb |
| service_name | trove |
| service_type | database |
| url | http://controller:8779/v1.0/%\(tenant_id\)s |
+--------------+----------------------------------------------+
Install the packages:
# yum install openstack-trove python-troveclient
In the /etc/trove
directory, edit the trove.conf
,
trove-taskmanager.conf
and trove-conductor.conf
files and
complete the following steps:
Provide appropriate values for the following settings:
[DEFAULT]
log_dir = /var/log/trove
trove_auth_url = http://controller/identity/v2.0
nova_compute_url = http://controller:8774/v2
cinder_url = http://controller:8776/v1
swift_url = http://controller:8080/v1/AUTH_
...
[database]
connection = mysql+pymysql://trove:TROVE_DBPASS@controller/trove
Configure the Database service to use the RabbitMQ
message broker
by setting the following options in each file:
[DEFAULT]
...
rpc_backend = rabbit
[oslo_messaging_rabbit]
...
rabbit_host = controller
rabbit_userid = openstack
rabbit_password = RABBIT_PASS
Verify that the api-paste.ini
file is present in /etc/trove
.
If the file is not present, you can get it from this location.
Edit the trove.conf
file so it includes appropriate values for the
settings shown below:
[DEFAULT]
auth_strategy = keystone
...
# Config option for showing the IP address that nova doles out
add_addresses = True
network_label_regex = ^NETWORK_LABEL$
...
api_paste_config = /etc/trove/api-paste.ini
...
[keystone_authtoken]
...
auth_uri = http://controller/identity
auth_url = http://controller/identity_admin
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = trove
password = TROVE_PASS
Edit the trove-taskmanager.conf
file so it includes the required
settings to connect to the OpenStack Compute service as shown below.
Include ConfigDrive settings so that configuration is injected
into the Guest VM. And finally, if using Nova Network, set the
the network driver name and a regex which allows Projects to
launch Guests on any of their networks.
[DEFAULT]
...
# Configuration options for talking to nova via the novaclient.
# These options are for an admin user in your keystone config.
# It proxy's the token received from the user to send to nova
# via this admin users creds,
# basically acting like the client via that proxy token.
nova_proxy_admin_user = admin
nova_proxy_admin_pass = ADMIN_PASS
nova_proxy_admin_tenant_name = service
taskmanager_manager = trove.taskmanager.manager.Manager
# Inject configuration into guest via ConfigDrive
use_nova_server_config_drive = True
# Set these if using Neutron Networking
network_driver=trove.network.neutron.NeutronDriver
network_label_regex=.*
Edit the /etc/trove/trove-guestagent.conf
file
so that future trove guests can connect to your OpenStack environment:
rabbit_host = controller
rabbit_password = RABBIT_PASS
nova_proxy_admin_user = admin
nova_proxy_admin_pass = ADMIN_PASS
nova_proxy_admin_tenant_name = service
trove_auth_url = http://controller/identity_admin/v2.0
Populate the trove database you created earlier in this procedure:
# su -s /bin/sh -c "trove-manage db_sync" trove
...
2016-04-06 22:00:17.771 10706 INFO trove.db.sqlalchemy.migration [-]
Upgrading mysql+pymysql://trove:dbaasdb@controller/trove to version latest
Note
Ignore any deprecation messages in this output.
Start the Database services and configure them to start when the system boots:
# systemctl enable openstack-trove-api.service \
openstack-trove-taskmanager.service \
openstack-trove-conductor.service
# systemctl start openstack-trove-api.service \
openstack-trove-taskmanager.service \
openstack-trove-conductor.service
Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.