OpenStack Docs: zaqar.conf

auth_strategy¶

Type:	string
Default:	`u''`

Backend to use for authentication. For no auth, keep it empty. Existing strategies: keystone. See also the keystone_authtoken section below

admin_mode¶

Type:	boolean
Default:	`false`

Activate privileged endpoints.

pooling¶

Type:	boolean
Default:	`false`

Enable pooling across multiple storage backends. If pooling is enabled, the storage driver configuration is used to determine where the catalogue/control plane data is kept.

Deprecated Variations¶
Group	Name
DEFAULT	sharding

unreliable¶

Type:	boolean
Default:	`false`

Disable all reliability constraints.

enable_deprecated_api_versions¶

Type:	list
Default:	`u''`

List of deprecated API versions to enable.

enable_checksum¶

Type:	boolean
Default:	`false`

Enable a checksum for message body. The default value is False.

rpc_conn_pool_size¶

Type:	integer
Default:	`30`

Size of RPC connection pool.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_conn_pool_size

conn_pool_min_size¶

Type:	integer
Default:	`2`

The pool size limit for connections expiration policy

conn_pool_ttl¶

Type:	integer
Default:	`1200`

The time-to-live in sec of idle connections in the pool

rpc_zmq_bind_address¶

Type:	string
Default:	`*`

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_address

rpc_zmq_matchmaker¶

Type:	string
Default:	`redis`
Valid Values:	redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_matchmaker

rpc_zmq_contexts¶

Type:	integer
Default:	`1`

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_contexts

rpc_zmq_topic_backlog¶

Type:	integer
Default:	`<None>`

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_topic_backlog

rpc_zmq_ipc_dir¶

Type:	string
Default:	`/var/run/openstack`

Directory for holding IPC sockets.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_ipc_dir

rpc_zmq_host¶

Type:	string
Default:	`localhost`

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_host

zmq_linger¶

Type:	integer
Default:	`-1`

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_cast_timeout

rpc_poll_timeout¶

Type:	integer
Default:	`1`

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_poll_timeout

zmq_target_expire¶

Type:	integer
Default:	`300`

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_expire

zmq_target_update¶

Type:	integer
Default:	`180`

Update period in seconds of a name service record about existing target.

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_update

use_pub_sub¶

Type:	boolean
Default:	`false`

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_pub_sub

use_router_proxy¶

Type:	boolean
Default:	`false`

Use ROUTER remote proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_router_proxy

use_dynamic_connections¶

Type:	boolean
Default:	`false`

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections¶

Type:	integer
Default:	`2`

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port¶

Type:	port number
Default:	`49153`
Minimum Value:	0
Maximum Value:	65535

Minimal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_min_port

rpc_zmq_max_port¶

Type:	integer
Default:	`65536`
Minimum Value:	1
Maximum Value:	65536

Maximal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_max_port

rpc_zmq_bind_port_retries¶

Type:	integer
Default:	`100`

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_port_retries

rpc_zmq_serialization¶

Type:	string
Default:	`json`
Valid Values:	json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_serialization

zmq_immediate¶

Type:	boolean
Default:	`true`

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_tcp_keepalive¶

Type:	integer
Default:	`-1`

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_idle¶

Type:	integer
Default:	`-1`

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_cnt¶

Type:	integer
Default:	`-1`

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl¶

Type:	integer
Default:	`-1`

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

rpc_thread_pool_size¶

Type:	integer
Default:	`100`

Maximum number of (green) threads to work concurrently.

rpc_message_ttl¶

Type:	integer
Default:	`300`

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks¶

Type:	boolean
Default:	`false`

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base¶

Type:	integer
Default:	`15`

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier¶

Type:	integer
Default:	`2`

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts¶

Type:	integer
Default:	`3`

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

subscribe_on¶

Type:	list
Default:	`u''`

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

executor_thread_pool_size¶

Type:	integer
Default:	`64`

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_thread_pool_size

rpc_response_timeout¶

Type:	integer
Default:	`60`

Seconds to wait for a response from a call.

transport_url¶

Type:	string
Default:	`<None>`

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

rpc_backend¶

Type:	string
Default:	`rabbit`

The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

control_exchange¶

Type:	string
Default:	`openstack`

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

debug¶

Type:	boolean
Default:	`false`
Mutable:	This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append¶

Type:	string
Default:	`<None>`
Mutable:	This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, logging_context_format_string).

Deprecated Variations¶
Group	Name
DEFAULT	log-config
DEFAULT	log_config

log_date_format¶

Type:	string
Default:	`%Y-%m-%d %H:%M:%S`

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file¶

Type:	string
Default:	`<None>`

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logfile

log_dir¶

Type:	string
Default:	`<None>`

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations¶
Group	Name
DEFAULT	logdir

watch_log_file¶

Type:	boolean
Default:	`false`

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog¶

Type:	boolean
Default:	`false`

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal¶

Type:	boolean
Default:	`false`

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility¶

Type:	string
Default:	`LOG_USER`

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json¶

Type:	boolean
Default:	`false`

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr¶

Type:	boolean
Default:	`false`

Log output to standard error. This option is ignored if log_config_append is set.

logging_context_format_string¶

Type:	string
Default:	`%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s`

Format string to use for log messages with context.

logging_default_format_string¶

Type:	string
Default:	`%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s`

Format string to use for log messages when context is undefined.

logging_debug_format_suffix¶

Type:	string
Default:	`%(funcName)s %(pathname)s:%(lineno)d`

Additional data to append to log message when logging level for the message is DEBUG.

logging_exception_prefix¶

Type:	string
Default:	`%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s`

Prefix each line of exception output with this format.

logging_user_identity_format¶

Type:	string
Default:	`%(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s`

Defines the format string for %(user_identity)s that is used in logging_context_format_string.

default_log_levels¶

Type: list

Default: amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors¶

Type:	boolean
Default:	`false`

Enables or disables publication of error events.

instance_format¶

Type:	string
Default:	`"[instance: %(uuid)s] "`

The format for an instance that is passed with the log message.

instance_uuid_format¶

Type:	string
Default:	`"[instance: %(uuid)s] "`

The format for an instance UUID that is passed with the log message.

rate_limit_interval¶

Type:	integer
Default:	`0`

Interval, number of seconds, of log rate limiting.

rate_limit_burst¶

Type:	integer
Default:	`0`

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level¶

Type:	string
Default:	`CRITICAL`

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations¶

Type:	boolean
Default:	`false`

Enables or disables fatal status of deprecations.

config_prefix¶

Type:	string
Default:	`cache.oslo`

Prefix for building the configuration dictionary for the cache region. This should not need to be changed unless there is another dogpile.cache region with the same configuration name.

expiration_time¶

Type:	integer
Default:	`600`

Default TTL, in seconds, for any cached item in the dogpile.cache region. This applies to any cached method that doesn’t have an explicit cache expiration time defined for it.

backend¶

Type:	string
Default:	`dogpile.cache.null`
Valid Values:	oslo_cache.memcache_pool, oslo_cache.dict, oslo_cache.mongo, oslo_cache.etcd3gw, dogpile.cache.memcached, dogpile.cache.pylibmc, dogpile.cache.bmemcached, dogpile.cache.dbm, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.memory_pickle, dogpile.cache.null

Cache backend module. For eventlet-based or environments with hundreds of threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is recommended. For environments with less than 100 threaded servers, Memcached (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test environments with a single instance of the server can use the dogpile.cache.memory backend.

backend_argument¶

Type:	multi-valued
Default:	`u''`

Arguments supplied to the backend module. Specify this option once per argument to be passed to the dogpile.cache backend. Example format: “<argname>:<value>”.

proxies¶

Type:	list
Default:	`u''`

Proxy classes to import that will affect the way the dogpile.cache backend functions. See the dogpile.cache documentation on changing-backend-behavior.

enabled¶

Type:	boolean
Default:	`false`

Global toggle for caching.

debug_cache_backend¶

Type:	boolean
Default:	`false`

Extra debugging from the cache backend (cache keys, get/set/delete/etc calls). This is only really useful if you need to see the specific cache-backend get/set/delete calls with the keys/values. Typically this should be left set to false.

memcache_servers¶

Type:	list
Default:	`localhost:11211`

Memcache servers in the format of “host:port”. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_dead_retry¶

Type:	integer
Default:	`300`

Number of seconds memcached server is considered dead before it is tried again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_socket_timeout¶

Type:	integer
Default:	`3`

Timeout in seconds for every call to a server. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_pool_maxsize¶

Type:	integer
Default:	`10`

Max total number of open connections to every memcached server. (oslo_cache.memcache_pool backend only).

memcache_pool_unused_timeout¶

Type:	integer
Default:	`60`

Number of seconds a connection to memcached is held unused in the pool before it is closed. (oslo_cache.memcache_pool backend only).

memcache_pool_connection_get_timeout¶

Type:	integer
Default:	`10`

Number of seconds that an operation will wait to get a memcache client connection.

allowed_origin¶

Type:	list
Default:	`<None>`

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials¶

Type:	boolean
Default:	`true`

Indicate that the actual request can include user credentials

expose_headers¶

Type:	list
Default:	`u''`

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age¶

Type:	integer
Default:	`3600`

Maximum cache age of CORS preflight requests.

allow_methods¶

Type:	list
Default:	`OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH`

Indicate which methods can be used during the actual request.

allow_headers¶

Type:	list
Default:	`u''`

Indicate which header field names may be used during the actual request.

transport¶

Type:	string
Default:	`wsgi`

Transport driver to use.

message_store¶

Type:	string
Default:	`mongodb`

Storage driver to use as the messaging store.

Deprecated Variations¶
Group	Name
drivers	storage

management_store¶

Type:	string
Default:	`mongodb`

Storage driver to use as the management store.

ssl_keyfile¶

Type:	string
Default:	`<None>`

The private keyfile used to identify the local connection against mongod. If included with the certifle then only the ssl_certfile is needed.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_keyfile

ssl_certfile¶

Type:	string
Default:	`<None>`

The certificate file used to identify the local connection against mongod.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_certfile

ssl_cert_reqs¶

Type:	string
Default:	`CERT_REQUIRED`

Specifies whether a certificate is required from the other side of the connection, and whether it will be validated if provided. It must be one of the three values CERT_NONE``(certificates ignored), ``CERT_OPTIONAL``(not required, but validated if provided), or ``CERT_REQUIRED``(required and validated). If the value of this parameter is not ``CERT_NONE, then the ssl_ca_cert parameter must point to a file of CA certificates.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_cert_reqs

ssl_ca_certs¶

Type:	string
Default:	`<None>`

The ca_certs file contains a set of concatenated “certification authority” certificates, which are used to validate certificates passed from the other end of the connection.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_ca_certs

uri¶

Type:	string
Default:	`<None>`

Mongodb Connection URI. If ssl connection enabled, then ssl_keyfile, ssl_certfile, ssl_cert_reqs, ssl_ca_certs need to be set accordingly.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	uri

database¶

Type:	string
Default:	`zaqar`

Database name.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	database

max_attempts¶

Type:	integer
Default:	`1000`
Minimum Value:	0

Maximum number of times to retry a failed operation. Currently only used for retrying a message post.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_attempts

max_retry_sleep¶

Type:	floating point
Default:	`0.1`

Maximum sleep interval between retries (actual sleep time increases linearly according to number of attempts performed).

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_retry_sleep

max_retry_jitter¶

Type:	floating point
Default:	`0.005`

Maximum jitter interval, to be added to the sleep interval, in order to decrease probability that parallel requests will retry at the same instant.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_retry_jitter

max_reconnect_attempts¶

Type:	integer
Default:	`10`

Maximum number of times to retry an operation that failed due to a primary node failover.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_reconnect_attempts

reconnect_sleep¶

Type:	floating point
Default:	`0.02`

Base sleep interval between attempts to reconnect after a primary node failover. The actual sleep time increases exponentially (power of 2) each time the operation is retried.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	reconnect_sleep

uri¶

Type:	string
Default:	`redis://127.0.0.1:6379`

Redis connection URI, taking one of three forms. For a direct connection to a Redis server, use the form “redis://[:password]@host[:port][?options]”, where password is redis-server’s password, whenredis-server is set password, the password optionneeds to be set. port defaults to 6379 if notspecified. For an HA master-slave Redis cluster using Redis Sentinel, use the form “redis://[:password]@host1[:port1][,host2[:port2],…,hostN[:portN]][?options]”, where each host specified corresponds to an instance of redis-sentinel. In this form, the name of the Redis master used in the Sentinel configuration must be included in the query string as “master=<name>”. Finally, to connect to a local instance of Redis over a unix socket, you may use the form “redis:[:password]@/path/to/redis.sock[?options]”. In all forms, the “socket_timeout” option may bespecified in the query string. Its value is given in seconds. If not provided, “socket_timeout” defaults to 0.1 seconds.There are multiple database instances in redis database, for example in the /etc/redis/redis.conf, if the parameter is “database 16”, there are 16 database instances. By default, the data is stored in db = 0 database, if you want to use db = 1 database, you can use the following form: “redis://host[:port][?dbid=1]”.

Deprecated Variations¶
Group	Name
drivers:storage:redis	uri

max_reconnect_attempts¶

Type:	integer
Default:	`10`

Maximum number of times to retry an operation that failed due to a redis node failover.

Deprecated Variations¶
Group	Name
drivers:storage:redis	max_reconnect_attempts

reconnect_sleep¶

Type:	floating point
Default:	`1.0`

Base sleep interval between attempts to reconnect after a redis node failover.

Deprecated Variations¶
Group	Name
drivers:storage:redis	reconnect_sleep

uri¶

Type:	string
Default:	`sqlite:///:memory:`

An sqlalchemy URL

Deprecated Variations¶
Group	Name
drivers:storage:sqlalchemy	uri

ssl_keyfile¶

Type:	string
Default:	`<None>`

The private keyfile used to identify the local connection against mongod. If included with the certifle then only the ssl_certfile is needed.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_keyfile

ssl_certfile¶

Type:	string
Default:	`<None>`

The certificate file used to identify the local connection against mongod.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_certfile

ssl_cert_reqs¶

Type:	string
Default:	`CERT_REQUIRED`

Specifies whether a certificate is required from the other side of the connection, and whether it will be validated if provided. It must be one of the three values CERT_NONE``(certificates ignored), ``CERT_OPTIONAL``(not required, but validated if provided), or ``CERT_REQUIRED``(required and validated). If the value of this parameter is not ``CERT_NONE, then the ssl_ca_cert parameter must point to a file of CA certificates.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_cert_reqs

ssl_ca_certs¶

Type:	string
Default:	`<None>`

The ca_certs file contains a set of concatenated “certification authority” certificates, which are used to validate certificates passed from the other end of the connection.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	ssl_ca_certs

uri¶

Type:	string
Default:	`<None>`

Mongodb Connection URI. If ssl connection enabled, then ssl_keyfile, ssl_certfile, ssl_cert_reqs, ssl_ca_certs need to be set accordingly.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	uri

database¶

Type:	string
Default:	`zaqar`

Database name.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	database

max_attempts¶

Type:	integer
Default:	`1000`
Minimum Value:	0

Maximum number of times to retry a failed operation. Currently only used for retrying a message post.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_attempts

max_retry_sleep¶

Type:	floating point
Default:	`0.1`

Maximum sleep interval between retries (actual sleep time increases linearly according to number of attempts performed).

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_retry_sleep

max_retry_jitter¶

Type:	floating point
Default:	`0.005`

Maximum jitter interval, to be added to the sleep interval, in order to decrease probability that parallel requests will retry at the same instant.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_retry_jitter

max_reconnect_attempts¶

Type:	integer
Default:	`10`

Maximum number of times to retry an operation that failed due to a primary node failover.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	max_reconnect_attempts

reconnect_sleep¶

Type:	floating point
Default:	`0.02`

Base sleep interval between attempts to reconnect after a primary node failover. The actual sleep time increases exponentially (power of 2) each time the operation is retried.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	reconnect_sleep

partitions¶

Type:	integer
Default:	`2`

Number of databases across which to partition message data, in order to reduce writer lock %. DO NOT change this setting after initial deployment. It MUST remain static. Also, you should not need a large number of partitions to improve performance, esp. if deploying MongoDB on SSD storage.

Deprecated Variations¶
Group	Name
drivers:storage:mongodb	partitions

uri¶

Type:	string
Default:	`redis://127.0.0.1:6379`

Redis connection URI, taking one of three forms. For a direct connection to a Redis server, use the form “redis://[:password]@host[:port][?options]”, where password is redis-server’s password, whenredis-server is set password, the password optionneeds to be set. port defaults to 6379 if notspecified. For an HA master-slave Redis cluster using Redis Sentinel, use the form “redis://[:password]@host1[:port1][,host2[:port2],…,hostN[:portN]][?options]”, where each host specified corresponds to an instance of redis-sentinel. In this form, the name of the Redis master used in the Sentinel configuration must be included in the query string as “master=<name>”. Finally, to connect to a local instance of Redis over a unix socket, you may use the form “redis:[:password]@/path/to/redis.sock[?options]”. In all forms, the “socket_timeout” option may bespecified in the query string. Its value is given in seconds. If not provided, “socket_timeout” defaults to 0.1 seconds.There are multiple database instances in redis database, for example in the /etc/redis/redis.conf, if the parameter is “database 16”, there are 16 database instances. By default, the data is stored in db = 0 database, if you want to use db = 1 database, you can use the following form: “redis://host[:port][?dbid=1]”.

Deprecated Variations¶
Group	Name
drivers:storage:redis	uri

max_reconnect_attempts¶

Type:	integer
Default:	`10`

Maximum number of times to retry an operation that failed due to a redis node failover.

Deprecated Variations¶
Group	Name
drivers:storage:redis	max_reconnect_attempts

reconnect_sleep¶

Type:	floating point
Default:	`1.0`

Base sleep interval between attempts to reconnect after a redis node failover.

Deprecated Variations¶
Group	Name
drivers:storage:redis	reconnect_sleep

auth_url¶

Type:	string
Default:	`http://127.0.0.1:5000/v3/`

URI of Keystone endpoint to discover Swift

uri¶

Type:	string
Default:	`swift://demo:nomoresecrete@/demo`

Custom URI describing the swift connection.

insecure¶

Type:	string
Default:	`False`

Don’t check SSL certificate

project_domain_id¶

Type:	string
Default:	`default`

Domain ID containing project

project_domain_name¶

Type:	string
Default:	`<None>`

Domain name containing project

user_domain_id¶

Type:	string
Default:	`default`

User’s domain id

user_domain_name¶

Type:	string
Default:	`<None>`

User’s domain name

bind¶

Type:	host address
Default:	`127.0.0.1`

Address on which the self-hosting server will listen.

port¶

Type:	port number
Default:	`9000`
Minimum Value:	0
Maximum Value:	65535

Port on which the self-hosting server will listen.

external_port¶

Type:	port number
Default:	`<None>`
Minimum Value:	0
Maximum Value:	65535

Port on which the service is provided to the user.

notification_bind¶

Type:	host address
Default:	`<None>`

Address on which the notification server will listen.

notification_port¶

Type:	port number
Default:	`0`
Minimum Value:	0
Maximum Value:	65535

Port on which the notification server will listen.

bind¶

Type:	host address
Default:	`127.0.0.1`

Address on which the self-hosting server will listen.

port¶

Type:	port number
Default:	`8888`
Minimum Value:	0
Maximum Value:	65535

Port on which the self-hosting server will listen.

www_authenticate_uri¶

Type:	string
Default:	`<None>`

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint.

Deprecated Variations¶
Group	Name
keystone_authtoken	auth_uri

auth_uri¶

Type:	string
Default:	`<None>`

Complete “public” Identity API endpoint. This endpoint should not be an “admin” endpoint, as it should be accessible by all end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client support in the wild varies. If you’re using a versioned v2 endpoint here, then this should not be the same endpoint the service user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

Warning

This option is deprecated for removal since Queens. Its value may be silently ignored in the future.

Reason:	The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S release.

auth_version¶

Type:	string
Default:	`<None>`

API version of the admin Identity API endpoint.

delay_auth_decision¶

Type:	boolean
Default:	`false`

Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.

http_connect_timeout¶

Type:	integer
Default:	`<None>`

Request timeout value for communicating with Identity API server.

http_request_max_retries¶

Type:	integer
Default:	`3`

How many times are we trying to reconnect when communicating with Identity API Server.

cache¶

Type:	string
Default:	`<None>`

Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option to have the middleware share a caching backend with swift. Otherwise, use the memcached_servers option instead.

certfile¶

Type:	string
Default:	`<None>`

Required if identity server requires client certificate

keyfile¶

Type:	string
Default:	`<None>`

Required if identity server requires client certificate

cafile¶

Type:	string
Default:	`<None>`

A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs.

insecure¶

Type:	boolean
Default:	`false`

Verify HTTPS connections.

region_name¶

Type:	string
Default:	`<None>`

The region in which the identity server can be found.

signing_dir¶

Type:	string
Default:	`<None>`

Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:	PKI token format is no longer supported.

memcached_servers¶

Type:	list
Default:	`<None>`

Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process.

Deprecated Variations¶
Group	Name
keystone_authtoken	memcache_servers

token_cache_time¶

Type:	integer
Default:	`300`

In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in seconds). Set to -1 to disable caching completely.

revocation_cache_time¶

Type:	integer
Default:	`10`

Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This option has been deprecated in the Ocata release and will be removed in the P release.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:	PKI token format is no longer supported.

memcache_security_strategy¶

Type:	string
Default:	`None`
Valid Values:	None, MAC, ENCRYPT

(Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of these options or empty, auth_token will raise an exception on initialization.

memcache_secret_key¶

Type:	string
Default:	`<None>`

(Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation.

memcache_pool_dead_retry¶

Type:	integer
Default:	`300`

(Optional) Number of seconds memcached server is considered dead before it is tried again.

memcache_pool_maxsize¶

Type:	integer
Default:	`10`

(Optional) Maximum total number of open connections to every memcached server.

memcache_pool_socket_timeout¶

Type:	integer
Default:	`3`

(Optional) Socket timeout in seconds for communicating with a memcached server.

memcache_pool_unused_timeout¶

Type:	integer
Default:	`60`

(Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed.

memcache_pool_conn_get_timeout¶

Type:	integer
Default:	`10`

(Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool.

memcache_use_advanced_pool¶

Type:	boolean
Default:	`false`

(Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x.

include_service_catalog¶

Type:	boolean
Default:	`true`

(Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation and will not set the X-Service-Catalog header.

enforce_token_bind¶

Type:	string
Default:	`permissive`

Used to control the use and type of token binding. Can be set to: “disabled” to not check token binding. “permissive” (default) to validate binding information if the bind type is of a form known to the server and ignore it if not. “strict” like “permissive” but if the bind type is unknown the token will be rejected. “required” any form of token binding is needed to be allowed. Finally the name of a binding method that must be present in tokens.

check_revocations_for_cached¶

Type:	boolean
Default:	`false`

If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity server.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:	PKI token format is no longer supported.

hash_algorithms¶

Type:	list
Default:	`md5`

Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.

Warning

This option is deprecated for removal since Ocata. Its value may be silently ignored in the future.

Reason:	PKI token format is no longer supported.

service_token_roles¶

Type:	list
Default:	`service`

A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check.

service_token_roles_required¶

Type:	boolean
Default:	`false`

For backwards compatibility reasons we must let valid service tokens pass that don’t pass the service_token_roles check as valid. Setting this true will become the default in a future release and should be enabled if possible.

auth_type¶

Type:	unknown type
Default:	`<None>`

Authentication type to load

Deprecated Variations¶
Group	Name
keystone_authtoken	auth_plugin

auth_section¶

Type:	unknown type
Default:	`<None>`

Config Section from which to load plugin specific options

host¶

Type:	string
Default:	`127.0.0.1`

Host to locate redis.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

port¶

Type:	port number
Default:	`6379`
Minimum Value:	0
Maximum Value:	65535

Use this port to connect to redis host.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

password¶

Type:	string
Default:	`u''`

Password for Redis server (optional).

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

sentinel_hosts¶

Type:	list
Default:	`u''`

List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port … ]

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

sentinel_group_name¶

Type:	string
Default:	`oslo-messaging-zeromq`

Redis replica set name.

wait_timeout¶

Type:	integer
Default:	`2000`

Time in ms to wait between connection attempts.

check_timeout¶

Type:	integer
Default:	`20000`

Time in ms to wait before the transaction is killed.

socket_timeout¶

Type:	integer
Default:	`10000`

Timeout in ms on blocking socket operations.

smtp_command¶

Type:	string
Default:	`/usr/sbin/sendmail -t -oi`

The command of smtp to send email. The format is “command_name arg1 arg2”.

max_notifier_workers¶

Type:	integer
Default:	`10`

The max amount of the notification workers.

require_confirmation¶

Type:	boolean
Default:	`false`

Whether the http/https/email subscription need to be confirmed before notification.

external_confirmation_url¶

Type:	string
Default:	`<None>`

The confirmation page url that will be used in email subscription confirmation before notification.

subscription_confirmation_email_template¶

Type:	dict
Default:	`body:You have chosen to subscribe to the queue: {0}. This queue belongs to project: {1}. To confirm this subscription, click or visit this link below: {2},sender:Zaqar Notifications <no-reply@openstack.org>,topic:Zaqar Notification - Subscription Confirmation`

Defines the set of subscription confirmation email content, including topic, body and sender. There is a mapping is {0} -> queue name, {1} ->project id, {2}-> confirm url in body string. User can use any of the three value. But they can’t use more than three.

unsubscribe_confirmation_email_template¶

Type:	dict
Default:	`body:You have unsubscribed successfully to the queue: {0}. This queue belongs to project: {1}. To resubscribe this subscription, click or visit this link below: {2},sender:Zaqar Notifications <no-reply@openstack.org>,topic:Zaqar Notification - Unsubscribe Confirmation`

Defines the set of unsubscribe confirmation email content, including topic, body and sender. There is a mapping is {0} -> queue name, {1} ->project id, {2}-> confirm url in body string. User can use any of the three value. But they can’t use more than three.

container_name¶

Type:	string
Default:	`<None>`

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations¶
Group	Name
amqp1	container_name

idle_timeout¶

Type:	integer
Default:	`0`

Timeout for inactive connections (in seconds)

Deprecated Variations¶
Group	Name
amqp1	idle_timeout

trace¶

Type:	boolean
Default:	`false`

Debug: dump AMQP frames to stdout

Deprecated Variations¶
Group	Name
amqp1	trace

ssl¶

Type:	boolean
Default:	`false`

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file¶

Type:	string
Default:	`u''`

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations¶
Group	Name
amqp1	ssl_ca_file

ssl_cert_file¶

Type:	string
Default:	`u''`

Self-identifying certificate PEM file for client authentication

Deprecated Variations¶
Group	Name
amqp1	ssl_cert_file

ssl_key_file¶

Type:	string
Default:	`u''`

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_file

ssl_key_password¶

Type:	string
Default:	`<None>`

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations¶
Group	Name
amqp1	ssl_key_password

ssl_verify_vhost¶

Type:	boolean
Default:	`false`

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

allow_insecure_clients¶

Type:	boolean
Default:	`false`

Accept clients using either SSL or plain TCP

Deprecated Variations¶
Group	Name
amqp1	allow_insecure_clients

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Not applicable - not a SSL server

sasl_mechanisms¶

Type:	string
Default:	`u''`

Space separated list of acceptable SASL mechanisms

Deprecated Variations¶
Group	Name
amqp1	sasl_mechanisms

sasl_config_dir¶

Type:	string
Default:	`u''`

Path to directory that contains the SASL configuration

Deprecated Variations¶
Group	Name
amqp1	sasl_config_dir

sasl_config_name¶

Type:	string
Default:	`u''`

Name of configuration file (without .conf suffix)

Deprecated Variations¶
Group	Name
amqp1	sasl_config_name

sasl_default_realm¶

Type:	string
Default:	`u''`

SASL realm to use if no realm present in username

username¶

Type:	string
Default:	`u''`

User name for message broker authentication

Deprecated Variations¶
Group	Name
amqp1	username

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Should use configuration option transport_url to provide the username.

password¶

Type:	string
Default:	`u''`

Password for message broker authentication

Deprecated Variations¶
Group	Name
amqp1	password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Should use configuration option transport_url to provide the password.

connection_retry_interval¶

Type:	integer
Default:	`1`
Minimum Value:	1

Seconds to pause before attempting to re-connect.

connection_retry_backoff¶

Type:	integer
Default:	`2`
Minimum Value:	0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max¶

Type:	integer
Default:	`30`
Minimum Value:	1

Maximum limit for connection_retry_interval + connection_retry_backoff

link_retry_delay¶

Type:	integer
Default:	`10`
Minimum Value:	1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry¶

Type:	integer
Default:	`0`
Minimum Value:	-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout¶

Type:	integer
Default:	`30`
Minimum Value:	5

The deadline for an rpc reply message delivery.

default_send_timeout¶

Type:	integer
Default:	`30`
Minimum Value:	5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout¶

Type:	integer
Default:	`30`
Minimum Value:	5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout¶

Type:	integer
Default:	`600`
Minimum Value:	1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode¶

Type:	string
Default:	`dynamic`

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost¶

Type:	boolean
Default:	`true`

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix¶

Type:	string
Default:	`exclusive`

address prefix used when sending to a specific server

Deprecated Variations¶
Group	Name
amqp1	server_request_prefix

broadcast_prefix¶

Type:	string
Default:	`broadcast`

address prefix used when broadcasting to all servers

Deprecated Variations¶
Group	Name
amqp1	broadcast_prefix

group_request_prefix¶

Type:	string
Default:	`unicast`

address prefix when sending to any server in group

Deprecated Variations¶
Group	Name
amqp1	group_request_prefix

rpc_address_prefix¶

Type:	string
Default:	`openstack.org/om/rpc`

Address prefix for all generated RPC addresses

notify_address_prefix¶

Type:	string
Default:	`openstack.org/om/notify`

Address prefix for all generated Notification addresses

multicast_address¶

Type:	string
Default:	`multicast`

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address¶

Type:	string
Default:	`unicast`

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address¶

Type:	string
Default:	`anycast`

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange¶

Type:	string
Default:	`<None>`

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange¶

Type:	string
Default:	`<None>`

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

reply_link_credit¶

Type:	integer
Default:	`200`
Minimum Value:	1

Window size for incoming RPC Reply messages.

rpc_server_credit¶

Type:	integer
Default:	`100`
Minimum Value:	1

Window size for incoming RPC Request messages

notify_server_credit¶

Type:	integer
Default:	`100`
Minimum Value:	1

Window size for incoming Notification messages

pre_settled¶

Type:	multi-valued
Default:	`rpc-cast`
Default:	`rpc-reply`

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

kafka_default_host¶

Type:	string
Default:	`localhost`

Default Kafka broker Host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

kafka_default_port¶

Type:	port number
Default:	`9092`
Minimum Value:	0
Maximum Value:	65535

Default Kafka broker Port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

kafka_max_fetch_bytes¶

Type:	integer
Default:	`1048576`

Max fetch bytes of Kafka consumer

kafka_consumer_timeout¶

Type:	floating point
Default:	`1.0`

Default timeout(s) for Kafka consumers

pool_size¶

Type:	integer
Default:	`10`

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Driver no longer uses connection pool.

conn_pool_min_size¶

Type:	integer
Default:	`2`

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Driver no longer uses connection pool.

conn_pool_ttl¶

Type:	integer
Default:	`1200`

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Driver no longer uses connection pool.

consumer_group¶

Type:	string
Default:	`oslo_messaging_consumer`

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout¶

Type:	floating point
Default:	`0.0`

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size¶

Type:	integer
Default:	`16384`

Size of batch for the producer async send

driver¶

Type:	multi-valued
Default:	`u''`

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations¶
Group	Name
DEFAULT	notification_driver

transport_url¶

Type:	string
Default:	`<None>`

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations¶
Group	Name
DEFAULT	notification_transport_url

topics¶

Type:	list
Default:	`notifications`

AMQP topic used for OpenStack notifications.

Deprecated Variations¶
Group	Name
rpc_notifier2	topics
DEFAULT	notification_topics

retry¶

Type:	integer
Default:	`-1`

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

amqp_durable_queues¶

Type:	boolean
Default:	`false`

Use durable queues in AMQP.

Deprecated Variations¶
Group	Name
DEFAULT	amqp_durable_queues
DEFAULT	rabbit_durable_queues

amqp_auto_delete¶

Type:	boolean
Default:	`false`

Auto-delete queues in AMQP.

Deprecated Variations¶
Group	Name
DEFAULT	amqp_auto_delete

ssl¶

Type:	boolean
Default:	`<None>`

Enable SSL

ssl_version¶

Type:	string
Default:	`u''`

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_version

ssl_key_file¶

Type:	string
Default:	`u''`

SSL key file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_keyfile

ssl_cert_file¶

Type:	string
Default:	`u''`

SSL cert file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_certfile

ssl_ca_file¶

Type:	string
Default:	`u''`

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_ssl_ca_certs

kombu_reconnect_delay¶

Type:	floating point
Default:	`1.0`

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations¶
Group	Name
DEFAULT	kombu_reconnect_delay

kombu_compression¶

Type:	string
Default:	`<None>`

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout¶

Type:	integer
Default:	`60`

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations¶
Group	Name
oslo_messaging_rabbit	kombu_reconnect_timeout

kombu_failover_strategy¶

Type:	string
Default:	`round-robin`
Valid Values:	round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_host¶

Type:	string
Default:	`localhost`

The RabbitMQ broker address where a single node is used.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

rabbit_port¶

Type:	port number
Default:	`5672`
Minimum Value:	0
Maximum Value:	65535

The RabbitMQ broker port where a single node is used.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_port

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

rabbit_hosts¶

Type:	list
Default:	`$rabbit_host:$rabbit_port`

RabbitMQ HA cluster host:port pairs.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_hosts

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

rabbit_userid¶

Type:	string
Default:	`guest`

The RabbitMQ userid.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_userid

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

rabbit_password¶

Type:	string
Default:	`guest`

The RabbitMQ password.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_password

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

rabbit_login_method¶

Type:	string
Default:	`AMQPLAIN`
Valid Values:	PLAIN, AMQPLAIN, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_login_method

rabbit_virtual_host¶

Type:	string
Default:	`/`

The RabbitMQ virtual host.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_virtual_host

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:	Replaced by [DEFAULT]/transport_url

rabbit_retry_interval¶

Type:	integer
Default:	`1`

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff¶

Type:	integer
Default:	`2`

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_retry_backoff

rabbit_interval_max¶

Type:	integer
Default:	`30`

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_max_retries¶

Type:	integer
Default:	`0`

Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_max_retries

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

rabbit_ha_queues¶

Type:	boolean
Default:	`false`

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations¶
Group	Name
DEFAULT	rabbit_ha_queues

rabbit_transient_queues_ttl¶

Type:	integer
Default:	`1800`
Minimum Value:	1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count¶

Type:	integer
Default:	`0`

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold¶

Type:	integer
Default:	`60`

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disable the heartbeat). EXPERIMENTAL

heartbeat_rate¶

Type:	integer
Default:	`2`

How often times during the heartbeat_timeout_threshold we check the heartbeat.

fake_rabbit¶

Type:	boolean
Default:	`false`

Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake

Deprecated Variations¶
Group	Name
DEFAULT	fake_rabbit

channel_max¶

Type:	integer
Default:	`<None>`

Maximum number of channels to allow

frame_max¶

Type:	integer
Default:	`<None>`

The maximum byte size for an AMQP frame

heartbeat_interval¶

Type:	integer
Default:	`3`

How often to send heartbeats for consumer’s connections

ssl_options¶

Type:	dict
Default:	`<None>`

Arguments passed to ssl.wrap_socket

socket_timeout¶

Type:	floating point
Default:	`0.25`

Set socket timeout in seconds for connection’s socket

tcp_user_timeout¶

Type:	floating point
Default:	`0.25`

Set TCP_USER_TIMEOUT in seconds for connection’s socket

host_connection_reconnect_delay¶

Type:	floating point
Default:	`0.25`

Set delay for reconnection to some host which has connection error

connection_factory¶

Type:	string
Default:	`single`
Valid Values:	new, single, read_write

Connection factory implementation

pool_max_size¶

Type:	integer
Default:	`30`

Maximum number of connections to keep queued.

pool_max_overflow¶

Type:	integer
Default:	`0`

Maximum number of connections to create above pool_max_size.

pool_timeout¶

Type:	integer
Default:	`30`

Default number of seconds to wait for a connections to available

pool_recycle¶

Type:	integer
Default:	`600`

Lifetime of a connection (since creation) in seconds or None for no recycling. Expired connections are closed on acquire.

pool_stale¶

Type:	integer
Default:	`60`

Threshold at which inactive (since release) connections are considered stale in seconds or None for no staleness. Stale connections are closed on acquire.

default_serializer_type¶

Type:	string
Default:	`json`
Valid Values:	json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

notification_persistence¶

Type:	boolean
Default:	`false`

Persist notification messages.

default_notification_exchange¶

Type:	string
Default:	`${control_exchange}_notification`

Exchange name for sending notifications

notification_listener_prefetch_count¶

Type:	integer
Default:	`100`

Max number of not acknowledged message which RabbitMQ can send to notification listener.

default_notification_retry_attempts¶

Type:	integer
Default:	`-1`

Reconnecting retry count in case of connectivity problem during sending notification, -1 means infinite retry.

notification_retry_delay¶

Type:	floating point
Default:	`0.25`

Reconnecting retry delay in case of connectivity problem during sending notification message

rpc_queue_expiration¶

Type:	integer
Default:	`60`

Time to live for rpc queues without consumers in seconds.

default_rpc_exchange¶

Type:	string
Default:	`${control_exchange}_rpc`

Exchange name for sending RPC messages

rpc_reply_exchange¶

Type:	string
Default:	`${control_exchange}_rpc_reply`

Exchange name for receiving RPC replies

rpc_listener_prefetch_count¶

Type:	integer
Default:	`100`

Max number of not acknowledged message which RabbitMQ can send to rpc listener.

rpc_reply_listener_prefetch_count¶

Type:	integer
Default:	`100`

Max number of not acknowledged message which RabbitMQ can send to rpc reply listener.

rpc_reply_retry_attempts¶

Type:	integer
Default:	`-1`

Reconnecting retry count in case of connectivity problem during sending reply. -1 means infinite retry during rpc_timeout

rpc_reply_retry_delay¶

Type:	floating point
Default:	`0.25`

Reconnecting retry delay in case of connectivity problem during sending reply.

default_rpc_retry_attempts¶

Type:	integer
Default:	`-1`

Reconnecting retry count in case of connectivity problem during sending RPC message, -1 means infinite retry. If actual retry attempts in not 0 the rpc request could be processed more than one time

rpc_retry_delay¶

Type:	floating point
Default:	`0.25`

Reconnecting retry delay in case of connectivity problem during sending RPC message

rpc_zmq_bind_address¶

Type:	string
Default:	`*`

ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The “host” option should point or resolve to this address.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_address

rpc_zmq_matchmaker¶

Type:	string
Default:	`redis`
Valid Values:	redis, sentinel, dummy

MatchMaker driver.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_matchmaker

rpc_zmq_contexts¶

Type:	integer
Default:	`1`

Number of ZeroMQ contexts, defaults to 1.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_contexts

rpc_zmq_topic_backlog¶

Type:	integer
Default:	`<None>`

Maximum number of ingress messages to locally buffer per topic. Default is unlimited.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_topic_backlog

rpc_zmq_ipc_dir¶

Type:	string
Default:	`/var/run/openstack`

Directory for holding IPC sockets.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_ipc_dir

rpc_zmq_host¶

Type:	string
Default:	`localhost`

Name of this node. Must be a valid hostname, FQDN, or IP address. Must match “host” option, if running Nova.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_host

zmq_linger¶

Type:	integer
Default:	`-1`

Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed. Positive values specify an upper bound for the linger period.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_cast_timeout

rpc_poll_timeout¶

Type:	integer
Default:	`1`

The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_poll_timeout

zmq_target_expire¶

Type:	integer
Default:	`300`

Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout).

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_expire

zmq_target_update¶

Type:	integer
Default:	`180`

Update period in seconds of a name service record about existing target.

Deprecated Variations¶
Group	Name
DEFAULT	zmq_target_update

use_pub_sub¶

Type:	boolean
Default:	`false`

Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_pub_sub

use_router_proxy¶

Type:	boolean
Default:	`false`

Use ROUTER remote proxy.

Deprecated Variations¶
Group	Name
DEFAULT	use_router_proxy

use_dynamic_connections¶

Type:	boolean
Default:	`false`

This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct connections for direct message types (ignored otherwise).

zmq_failover_connections¶

Type:	integer
Default:	`2`

How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.

rpc_zmq_min_port¶

Type:	port number
Default:	`49153`
Minimum Value:	0
Maximum Value:	65535

Minimal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_min_port

rpc_zmq_max_port¶

Type:	integer
Default:	`65536`
Minimum Value:	1
Maximum Value:	65536

Maximal port number for random ports range.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_max_port

rpc_zmq_bind_port_retries¶

Type:	integer
Default:	`100`

Number of retries to find free port number before fail with ZMQBindError.

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_bind_port_retries

rpc_zmq_serialization¶

Type:	string
Default:	`json`
Valid Values:	json, msgpack

Default serialization mechanism for serializing/deserializing outgoing/incoming messages

Deprecated Variations¶
Group	Name
DEFAULT	rpc_zmq_serialization

zmq_immediate¶

Type:	boolean
Default:	`true`

This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it.

zmq_tcp_keepalive¶

Type:	integer
Default:	`-1`

Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively.

zmq_tcp_keepalive_idle¶

Type:	integer
Default:	`-1`

The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_cnt¶

Type:	integer
Default:	`-1`

The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

zmq_tcp_keepalive_intvl¶

Type:	integer
Default:	`-1`

The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS default.

rpc_thread_pool_size¶

Type:	integer
Default:	`100`

Maximum number of (green) threads to work concurrently.

rpc_message_ttl¶

Type:	integer
Default:	`300`

Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server.

rpc_use_acks¶

Type:	boolean
Default:	`false`

Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB.

rpc_ack_timeout_base¶

Type:	integer
Default:	`15`

Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.

rpc_ack_timeout_multiplier¶

Type:	integer
Default:	`2`

Number to multiply base ack timeout by after each retry attempt.

rpc_retry_attempts¶

Type:	integer
Default:	`3`

Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries, None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled.

subscribe_on¶

Type:	list
Default:	`u''`

List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the matchmaker.

enforce_scope¶

Type:	boolean
Default:	`false`

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

policy_file¶

Type:	string
Default:	`policy.json`

The file that defines policies.

Deprecated Variations¶
Group	Name
DEFAULT	policy_file

policy_default_rule¶

Type:	string
Default:	`default`

Default rule. Enforced when a requested rule is not found.

Deprecated Variations¶
Group	Name
DEFAULT	policy_default_rule

policy_dirs¶

Type:	multi-valued
Default:	`policy.d`

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations¶
Group	Name
DEFAULT	policy_dirs

remote_content_type¶

Type:	string
Default:	`application/x-www-form-urlencoded`
Valid Values:	application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt¶

Type:	boolean
Default:	`false`

server identity verification for REST based policy check

remote_ssl_ca_crt_file¶

Type:	string
Default:	`<None>`

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file¶

Type:	string
Default:	`<None>`

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file¶

Type:	string
Default:	`<None>`

Absolute path client key file REST based policy check

log_dir¶

Type:	string
Default:	`<None>`

Path to a log directory where to create a file

file_event_handler¶

Type:	string
Default:	`<None>`

The path to a file to watch for changes to trigger the reports, instead of signals. Setting this option disables the signal trigger for the reports. If application is running as a WSGI application it is recommended to use this instead of signals.

file_event_handler_interval¶

Type:	integer
Default:	`1`

How many seconds to wait between polls when file_event_handler is set

enable_virtual_pool¶

Type:	boolean
Default:	`false`

If enabled, the message_store will be used as the storage for the virtual pool.

trace_wsgi_transport¶

Type:	boolean
Default:	`false`

If False doesn’t trace any transport requests.Please note that it doesn’t work for websocket now.

trace_message_store¶

Type:	boolean
Default:	`false`

If False doesn’t trace any message store requests.

trace_management_store¶

Type:	boolean
Default:	`false`

If False doesn’t trace any management store requests.

enabled¶

Type:	boolean
Default:	`false`

Enables the profiling for all services on this node. Default value is False (fully disable the profiling feature).

Possible values:

True: Enables the feature
False: Disables the feature. The profiling cannot be started via this project

operations. If the profiling is triggered by another project, this project part will be empty.

Deprecated Variations¶
Group	Name
profiler	profiler_enabled

trace_sqlalchemy¶

Type:	boolean
Default:	`false`

Enables SQL requests profiling in services. Default value is False (SQL requests won’t be traced).

Possible values:

True: Enables SQL requests profiling. Each SQL query will be part of the

trace and can the be analyzed by how much time was spent for that. * False: Disables SQL requests profiling. The spent time is only shown on a higher level of operations. Single SQL queries cannot be analyzed this way.

hmac_keys¶

Type:	string
Default:	`SECRET_KEY`

Secret key(s) to use for encrypting context data for performance profiling. This string value should have the following format: <key1>[,<key2>,…<keyn>], where each key is some random string. A user who triggers the profiling via the REST API has to set one of these keys in the headers of the REST API call to include profiling results of this node for this particular project.

Both “enabled” flag and “hmac_keys” config options should be set to enable profiling. Also, to generate correct profiling information across all services at least one key needs to be consistent between OpenStack projects. This ensures it can be used from client side to generate the trace, containing information from all possible resources.

connection_string¶

Type:	string
Default:	`messaging://`

Connection string for a notifier backend. Default value is messaging:// which sets the notifier to oslo_messaging.

Examples of possible values:

messaging://: use oslo_messaging driver for sending notifications.
mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications.
elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending

notifications.

es_doc_type¶

Type:	string
Default:	`notification`

Document type for notification indexing in elasticsearch.

es_scroll_time¶

Type:	string
Default:	`2m`

This parameter is a time value parameter (for example: es_scroll_time=2m), indicating for how long the nodes that participate in the search will maintain relevant resources in order to continue and support it.

es_scroll_size¶

Type:	integer
Default:	`10000`

Elasticsearch splits large requests in batches. This parameter defines maximum size of each batch (for example: es_scroll_size=10000).

socket_timeout¶

Type:	floating point
Default:	`0.1`

Redissentinel provides a timeout option on the connections. This parameter defines that timeout (for example: socket_timeout=0.1).

sentinel_service_name¶

Type:	string
Default:	`mymaster`

Redissentinel uses a service name to identify a master redis service. This parameter defines the name (for example: sentinal_service_name=mymaster).

secret_key¶

Type:	string
Default:	`<None>`

Secret key used to encrypt pre-signed URLs.

queue_pipeline¶

Type:	list
Default:	`u''`

Pipeline to use for processing queue operations. This pipeline will be consumed before calling the storage driver’s controller methods.

message_pipeline¶

Type:	list
Default:	`u''`

Pipeline to use for processing message operations. This pipeline will be consumed before calling the storage driver’s controller methods.

claim_pipeline¶

Type:	list
Default:	`u''`

Pipeline to use for processing claim operations. This pipeline will be consumed before calling the storage driver’s controller methods.

subscription_pipeline¶

Type:	list
Default:	`u''`

Pipeline to use for processing subscription operations. This pipeline will be consumed before calling the storage driver’s controller methods.

max_queues_per_page¶

Type:	integer
Default:	`20`

Defines the maximum number of queues per page.

Deprecated Variations¶
Group	Name
limits:transport	queue_paging_uplimit

max_messages_per_page¶

Type:	integer
Default:	`20`

Defines the maximum number of messages per page.

Deprecated Variations¶
Group	Name
limits:transport	message_paging_uplimit

max_subscriptions_per_page¶

Type:	integer
Default:	`20`

Defines the maximum number of subscriptions per page.

Deprecated Variations¶
Group	Name
limits:transport	subscription_paging_uplimit

max_messages_per_claim_or_pop¶

Type:	integer
Default:	`20`

The maximum number of messages that can be claimed (OR) popped in a single request

Deprecated Variations¶
Group	Name
transport	max_messages_per_claim

max_queue_metadata¶

Type:	integer
Default:	`65536`

Defines the maximum amount of metadata in a queue.

Deprecated Variations¶
Group	Name
limits:transport	metadata_size_uplimit

max_messages_post_size¶

Type:	integer
Default:	`262144`

Defines the maximum size of message posts.

Deprecated Variations¶
Group	Name
transport	max_message_size
limits:transport	message_size_uplimit

max_message_ttl¶

Type:	integer
Default:	`1209600`

Maximum amount of time a message will be available.

Deprecated Variations¶
Group	Name
limits:transport	message_ttl_max

max_message_delay¶

Type:	integer
Default:	`900`

Maximum delay seconds for messages can be claimed.

max_claim_ttl¶

Type:	integer
Default:	`43200`

Maximum length of a message in claimed state.

Deprecated Variations¶
Group	Name
limits:transport	claim_ttl_max

max_claim_grace¶

Type:	integer
Default:	`43200`

Defines the maximum message grace period in seconds.

Deprecated Variations¶
Group	Name
limits:transport	claim_grace_max

subscriber_types¶

Type:	list
Default:	`http,https,mailto,trust+http,trust+https`

Defines supported subscriber types.

max_flavors_per_page¶

Type:	integer
Default:	`20`

Defines the maximum number of flavors per page.

max_pools_per_page¶

Type:	integer
Default:	`20`

Defines the maximum number of pools per page.

default_message_ttl¶

Type:	integer
Default:	`3600`

Defines how long a message will be accessible.

default_message_delay¶

Type:	integer
Default:	`0`

Defines the defautl value for queue delay seconds.The 0 means the delayed queues feature is close.

default_claim_ttl¶

Type:	integer
Default:	`300`

Defines how long a message will be in claimed state.

default_claim_grace¶

Type:	integer
Default:	`60`

Defines the message grace period in seconds.

default_subscription_ttl¶

Type:	integer
Default:	`3600`

Defines how long a subscription will be available.

auth_type¶

Type:	unknown type
Default:	`<None>`

Authentication type to load

Deprecated Variations¶
Group	Name
trustee	auth_plugin

auth_section¶

Type:	unknown type
Default:	`<None>`

Config Section from which to load plugin specific options

auth_url¶

Type:	unknown type
Default:	`<None>`

Authentication URL

system_scope¶

Type:	unknown type
Default:	`<None>`

Scope for system operations

domain_id¶

Type:	unknown type
Default:	`<None>`

Domain ID to scope to

domain_name¶

Type:	unknown type
Default:	`<None>`

Domain name to scope to

project_id¶

Type:	unknown type
Default:	`<None>`

Project ID to scope to

Deprecated Variations¶
Group	Name
trustee	tenant-id
trustee	tenant_id

project_name¶

Type:	unknown type
Default:	`<None>`

Project name to scope to

Deprecated Variations¶
Group	Name
trustee	tenant-name
trustee	tenant_name

project_domain_id¶

Type:	unknown type
Default:	`<None>`

Domain ID containing project

project_domain_name¶

Type:	unknown type
Default:	`<None>`

Domain name containing project

trust_id¶

Type:	unknown type
Default:	`<None>`

Trust ID

default_domain_id¶

Type:	unknown type
Default:	`<None>`

Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

default_domain_name¶

Type:	unknown type
Default:	`<None>`

Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2 authentication.

user_id¶

Type:	unknown type
Default:	`<None>`

User id

username¶

Type:	unknown type
Default:	`<None>`

Username

Deprecated Variations¶
Group	Name
trustee	user-name
trustee	user_name

user_domain_id¶

Type:	unknown type
Default:	`<None>`

User’s domain id

user_domain_name¶

Type:	unknown type
Default:	`<None>`

User’s domain name

password¶

Type:	unknown type
Default:	`<None>`

User’s password

zaqar.conf

zaqar.conf¶

DEFAULT¶

cache¶

cors¶

drivers¶

drivers:management_store:mongodb¶

drivers:management_store:redis¶

drivers:management_store:sqlalchemy¶

drivers:message_store:mongodb¶

drivers:message_store:redis¶

drivers:message_store:swift¶

drivers:transport:websocket¶

drivers:transport:wsgi¶

keystone_authtoken¶

matchmaker_redis¶

notification¶

oslo_messaging_amqp¶

oslo_messaging_kafka¶

oslo_messaging_notifications¶

oslo_messaging_rabbit¶

oslo_messaging_zmq¶

oslo_policy¶

oslo_reports¶

pooling:catalog¶

profiler¶

signed_url¶

storage¶

transport¶

trustee¶

zaqar 6.0.2.dev7

Page Contents