Manage Subcloud Management Network Parameters¶
You can change the management IP addresses for an AIO-SX subcloud.
Prerequisites
Ensure that the subcloud has been backed up, in case a subcloud system recovery is required.
Ensure that the system time between system controllers and the subclouds are synchronized.
~(keystone_admin)]$ date -u
If the time is not correct either on the system controllers or the subclouds, check the
clock_synchronization
configuration on the system.~(keystone_admin)]$ system host-show controller-0
Check the NTP server configuration or PTP server configuration sections to correct the system time based on the system’s
clock_synchronization
configuration (NTP or PTP).
Change the Network Parameters of the Management Network for AIO-SX Subcloud Only¶
This task is required only if the management network needs to be changed for an AIO-SX subcloud.
Procedure
Lock the controller.
system host-lock controller-0
Obtain the UUID of the management pool.
system addrpool-list
Modify the management address pool.
For example:
system addrpool-modify <uuid> \ --network 192.168.103.0 \ --prefix 26 \ --floating-address 192.168.103.2 \ --controller0-address 192.168.103.3 \ --controller1-address 192.168.103.4 \ --gateway-address 192.168.103.1 \ --ranges 192.168.103.1-192.168.103.50
Unlock the controller.
system host-unlock controller-0
Wait for the subcloud to recover and to have all alarms cleared.
On the system controller, perform the following:
Unmanage the subcloud.
~(keystone_admin)]$ dcmanager subcloud unmanage <subcloud-name>
Update the subcloud with the new subnet parameters.
For example:
~(keystone_admin)]$ dcmanager subcloud update --management-subnet 192.168.103.0/26 --management-gateway-ip 192.168.103.1 --management-start-ip 192.168.103.2 --management-end-ip 192.168.103.5 --bootstrap-address 10.33.1.3 <subcloud-name>
Manage the subcloud.
~(keystone_admin)]$ dcmanager subcloud manage <subcloud-name>