PXE Boot NetworkΒΆ
You can set up a PXE boot network for booting all nodes to allow a non-standard management network configuration.
The internal management network is used for PXE booting of new hosts and the PXE boot network is not required. However there are scenarios where the internal management network cannot be used for PXE booting of new hosts. For example, if the internal management network needs to be on a VLAN-tagged network for deployment reasons, or if it must support IPv6, you must configure the optional untagged PXE boot network for PXE booting of new hosts using IPv4.
Note
StarlingX does not support IPv6 PXE booting.
Note
When you use the PXE boot network, the PXE boot network and management network should be isolated with VLAN.
