Metadata-Version: 2.1
Name: monasca-ceilometer
Version: 1.8.1
Summary: OpenStack Monasca Ceilometer - Provide Metering for Monasca
Home-page: https://github.com/openstack/monasca-ceilometer
Author: OpenStack
Author-email: openstack-dev@lists.openstack.org
License: UNKNOWN
Platform: UNKNOWN
Classifier: Environment :: OpenStack
Classifier: Intended Audience :: Information Technology
Classifier: Intended Audience :: System Administrators
Classifier: License :: OSI Approved :: Apache Software License
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.5

Team and repository tags
========================


.. image:: https://governance.openstack.org/badges/monasca-ceilometer.svg
    :target: https://governance.openstack.org/reference/tags/index.html

.. Change things from this point on

monasca-ceilometer
==================

Python plugin and storage driver for Ceilometer to send samples to
monasca-api. Also known as `Ceilosca`_.

Installation
------------

Installation instructions for setting up Ceilosca automatically
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

See `devstack/README.md`_.

Installation Instructions for setting up Ceilosca manually
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

*To set up Ceilosca automatically, read the instructions in
devstack/README.md or use the included Vagrantfile*

Assumes that an active monasca-api server is running after installing
DevStack.

1. Run devstack to get openstack installed, including Monasca and
   Ceilometer plugins.

2. Install python-monascaclient.

   ::

      pip install python-monascaclient

3. Clone monasca-ceilometer from github.com.

4. Copy the following files from ``ceilosca/ceilometer`` to devstack’s
   ceilometer location, typically at ``/opt/stack/ceilometer``.

   ::

      monasca_client.py
      tests/* (skipping the init.py files)
      publisher/monasca_data_filter.py
      publisher/monclient.py
      ceilosca_mapping/*
      opts.py
      monasca_ceilometer_opts.py

5. Edit ``setup.cfg`` (used at the time of installation)

   Under ‘ceilometer.sample.publisher =’ section add the following line:

   ::

      monasca = ceilometer.publisher.monclient:MonascaPublisher

6. Configure ``/etc/ceilometer/pipeline.yaml`` to send the metrics to
   the monasca publisher. Use the included
   monasca-ceilometer/etc/ceilometer/pipeline.yaml file as an example.

7. Configure ``/etc/ceilometer/ceilometer.conf`` for setting up storage
   driver for ceilometer API. Use the included
   ``monasca-ceilometer/etc/ceilometer/ceilometer.conf`` file as an
   example.

8. Copy the included ``monasca_field_definitions.yml`` and
   ``monasca_pipeline.yaml`` files from
   ``monasca-ceilometer/etc/ceilometer`` to ``/etc/ceilometer``.

   This monasca_field_definitions.yaml file contains configuration how
   to treat each field in ceilometer sample object on per meter basis.
   The monasca_data_filter.py uses this file and only stores the fields
   that are specified in this config file.

9. Make sure the user specified under service_credentials in
   ``ceilometer.conf`` has *monasca_user role* added.

Other install info
~~~~~~~~~~~~~~~~~~

Since we don’t have a full repo of ceilometer, we setup the ceilometer
repo in venv and copy monasca integration files in there, and run the
unit tests over that code. At present this is tested against ceilometer
stable/pike branch, if you need to test against different branch you can
change it in test-requirements.txt

Relevant files are:

-  monasca_test_setup.py - determines the ceilometer venv path and
   copies the relevant files over

-  tox.ini - calls the commands for setup and runs the tests

-  test-requirements.txt - contains the dependencies required for
   testing

Using Ceilosca
--------------

Defining or changing existing meters
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

From time to time, Ceilometer introduces new meters. The list of
currently supported measurements can be found at
https://docs.openstack.org/ceilometer/pike/admin/telemetry-measurements.html
(which is generated from
https://github.com/openstack/ceilometer/doc/source/admin/telemetry-measurements.rst).

Meters are specified both for transfer from Ceilometer to Monasca API
and from Monasca to Ceilometer v2 API (for versions supporting it). In a
nutshell, pipeline YAML from Ceilometer along with the
ceilometer_static_info_mapping.yaml from Ceilosca define what goes to
Monasca API, and ceilosca_mapping.yaml defines what gets mapped back
from Monasca API to Ceilometer v2 API (deprecated).

Some meters require additional configuration in Ceilometer. For example,
the SDN pollster meters need specialized drivers. For more information
about how Ceilometer collects meters through polling or collecting,
please reference the `Telemetry documentation`_ and `measurements`_.

Defining which meters are published from Ceilometer to Monasca API
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

As with Ceilometer, the list of meters to be published is specified in
``/etc/ceilometer/pipeline.yaml``.

As metering data accumulates over time, it is recommended that
Ceilometer be configured to only publish meters where the customer has a
need for the data. Additionally, it is recommended to check the
measurements captured by Monasca agents to avoid any duplication of
data.

To enable or disable meters,

1. Identify the current list of meters being collected, specified in
   ``/etc/ceilometer/pipeline.yaml``. *Hint: You can see which meters
   are currently being reported through ``monasca metric-list`` (or
   ``ceilometer meter-list`` in Pike and earlier).*

2. Edit the ``/etc/ceilometer/pipeline.yaml`` file to add or remove
   entries from the meters list. For a short example see
   etc/ceilometer/ceilosca_pipeline.yaml or the longer
   etc/ceilometer/example_pipeline.yaml.

3. Repeat changes for all control plane nodes.

4. Restart all Ceilometer notification agents, polling agents, and central
   services to pick up the changes.

To create new meters (or clean out removed meters),

1. Identify which meters are available for this OpenStack Ceilometer release
   on`telemetry-measurements.html`_

   - Idenfity which parameters should betransfered to Monasca.
   - Identify the Origin of the meter. Be aware that Pollster meters may
     require additional configuration.

2. Modify ``monasca_field_definitions.yml`` with the new meters.

3. Restart Ceilometer services on all control nodes.

Also note that HPE published documentation describing how to configure
the metering service (using Ceilosca in Helion OpenStack 3.0 and later),
which may be helpful for historical context. `link 1`_ `link 2`_ `link 3`_

Defining which meters are available through Ceilometer v2 API (deprecated)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The Ceilometer v2 API was deprecated as of Newton and removed in Queens
from the ceilometer repo. All of the published Ceilometer measurements
will continue to be available through the Monasca API.

Note: It is possible, for Ceilometer versions before the Ceilometer v2
API was removed (Pike, Ocata, etc), to map Monasca gathered metrics back
to the Ceilometer API by specifying them in the
``/etc/ceilosca-mapping.yaml`` file. For example, “cpu.time_ns” for a vm
component can be mapped back to “cpu” in Ceilometer v2 API.

Using Monasca API meters collected by Ceilosca
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Here are a few examples of how a meter gathered by Ceilometer and passed
through Ceilosca can be found and used in the Monasca API.

In Ceilometer pipeline YAML file

.. csv-table::
   :header: "Ceilometer meter", "Monasca API metric"
   :widths: 50, 50

   "vcpus", "vcpus"
   "image.size", "image.size"
   "disk.root.size", "disk.root.size"
   "memory", "memory"
   "storage.objects", "storage.objects"

In /etc/ceilometer/ceilometer-static-info-mapping.yaml

.. csv-table::
   :header: "Ceilometer meter", "Monasca API metric"
   :widths: 50, 50

   "disk.ephemeral.size", "disk.ephemeral.size"
   "disk.root.size", "disk.root.size"

Note: Monasca Agent can gather many similar metrics directly, such as
cpu time for a VM. For simplicity, it is recommended that the Monasca
Agent be favored when choosing which metrics to use.

The source for these configuration files in the monasca-ceilometer repo
is:

::

   ceilosca
   ├── ceilometer
   │   ├── ceilosca_mapping
   │   │   ├── data
   │   │   │   ├── ceilometer_static_info_mapping.yaml
   │   │   │   └── ceilosca_mapping.yaml

License
=======

Copyright (c) 2015-2017 Hewlett-Packard Development Company, L.P.

Copyright (c) 2018 SUSE LLC

Licensed under the Apache License, Version 2.0 (the “License”); you may
not use this file except in compliance with the License. You may obtain
a copy of the License at

::

   http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an “AS IS” BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

.. _Telemetry documentation: https://docs.openstack.org/ceilometer/pike/admin/index.html
.. _measurements: https://docs.openstack.org/ceilometer/pike/admin/telemetry-measurements.html
.. _telemetry-measurements.html: https://docs.openstack.org/ceilometer/pike/admin/telemetry-measurements.html
.. _link 1: https://docs.hpcloud.com/hos-3.x/helion/metering/metering_reconfig.html
.. _link 2: https://docs.hpcloud.com/hos-3.x/helion/metering/metering_notifications.html#notifications__list
.. _link 3: https://docs.hpcloud.com/hos-5.x/helion/metering/metering_notifications.html#notifications__list
.. _Ceilosca: https://wiki.openstack.org/wiki/Ceilosca
.. _devstack/README.md: devstack/README.md



