#! /usr/bin/env python
# Copyright (c) 2010-2012 OpenStack, LLC.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import cPickle as pickle
from array import array
from errno import EEXIST
from gzip import GzipFile
from itertools import islice, izip
from os import mkdir
from os.path import basename, dirname, exists, join as pathjoin
from sys import argv, exit, modules
from textwrap import wrap
from time import time

from swift.common import exceptions
from swift.common.ring import RingBuilder


MAJOR_VERSION = 1
MINOR_VERSION = 3
EXIT_SUCCESS = 0
EXIT_WARNING = 1
EXIT_ERROR = 2


def search_devs(builder, search_value):
    """
The <search-value> can be of the form:
    d<device_id>z<zone>-<ip>:<port>/<device_name>_<meta>
    Any part is optional, but you must include at least one part.
    Examples:
        d74              Matches the device id 74
        z1               Matches devices in zone 1
        z1-1.2.3.4       Matches devices in zone 1 with the ip 1.2.3.4
        1.2.3.4          Matches devices in any zone with the ip 1.2.3.4
        z1:5678          Matches devices in zone 1 using port 5678
        :5678            Matches devices that use port 5678
        /sdb1            Matches devices with the device name sdb1
        _shiny           Matches devices with shiny in the meta data
        _"snet: 5.6.7.8" Matches devices with snet: 5.6.7.8 in the meta data
        [::1]            Matches devices in any zone with the ip ::1
        z1-[::1]:5678    Matches devices in zone 1 with ip ::1 and port 5678
    Most specific example:
        d74z1-1.2.3.4:5678/sdb1_"snet: 5.6.7.8"
    Nerd explanation:
        All items require their single character prefix except the ip, in which
        case the - is optional unless the device id or zone is also included.
    """
    orig_search_value = search_value
    match = []
    if search_value.startswith('d'):
        i = 1
        while i < len(search_value) and search_value[i].isdigit():
            i += 1
        match.append(('id', int(search_value[1:i])))
        search_value = search_value[i:]
    if search_value.startswith('z'):
        i = 1
        while i < len(search_value) and search_value[i].isdigit():
            i += 1
        match.append(('zone', int(search_value[1:i])))
        search_value = search_value[i:]
    if search_value.startswith('-'):
        search_value = search_value[1:]
    if len(search_value) and search_value[0].isdigit():
        i = 1
        while i < len(search_value) and search_value[i] in '0123456789.':
            i += 1
        match.append(('ip', search_value[:i]))
        search_value = search_value[i:]
    elif len(search_value) and search_value[0] == '[':
        i = 1
        while i < len(search_value) and search_value[i] != ']':
            i += 1
        i += 1
        match.append(('ip', search_value[:i].lstrip('[').rstrip(']')))
        search_value = search_value[i:]
    if search_value.startswith(':'):
        i = 1
        while i < len(search_value) and search_value[i].isdigit():
            i += 1
        match.append(('port', int(search_value[1:i])))
        search_value = search_value[i:]
    if search_value.startswith('/'):
        i = 1
        while i < len(search_value) and search_value[i] != '_':
            i += 1
        match.append(('device', search_value[1:i]))
        search_value = search_value[i:]
    if search_value.startswith('_'):
        match.append(('meta', search_value[1:]))
        search_value = ''
    if search_value:
        raise ValueError('Invalid <search-value>: %s' %
                         repr(orig_search_value))
    devs = []
    for dev in builder.devs:
        if not dev:
            continue
        matched = True
        for key, value in match:
            if key == 'meta':
                if value not in dev.get(key):
                    matched = False
            elif dev.get(key) != value:
                matched = False
        if matched:
            devs.append(dev)
    return devs


def format_device(dev):
    """
    Format a device for display.
    """
    if ':' in dev['ip']:
        return 'd%(id)sz%(zone)s-[%(ip)s]:%(port)s/%(device)s_"%(meta)s"' % dev
    else:
        return 'd%(id)sz%(zone)s-%(ip)s:%(port)s/%(device)s_"%(meta)s"' % dev


class Commands:

    def unknown():
        print 'Unknown command: %s' % argv[2]
        exit(EXIT_ERROR)

    def create():
        """
swift-ring-builder <builder_file> create <part_power> <replicas>
                                         <min_part_hours>
    Creates <builder_file> with 2^<part_power> partitions and <replicas>.
    <min_part_hours> is number of hours to restrict moving a partition more
    than once.
        """
        if len(argv) < 6:
            print Commands.create.__doc__.strip()
            exit(EXIT_ERROR)
        builder = RingBuilder(int(argv[3]), int(argv[4]), int(argv[5]))
        backup_dir = pathjoin(dirname(argv[1]), 'backups')
        try:
            mkdir(backup_dir)
        except OSError, err:
            if err.errno != EEXIST:
                raise
        pickle.dump(builder.to_dict(), open(pathjoin(backup_dir,
            '%d.' % time() + basename(argv[1])), 'wb'), protocol=2)
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(EXIT_SUCCESS)

    def default():
        """
swift-ring-builder <builder_file>
    Shows information about the ring and the devices within.
        """
        print '%s, build version %d' % (argv[1], builder.version)
        zones = 0
        balance = 0
        if builder.devs:
            zones = len(set(d['zone'] for d in builder.devs if d is not None))
            balance = builder.get_balance()
        print '%d partitions, %d replicas, %d zones, %d devices, %.02f ' \
              'balance' % (builder.parts, builder.replicas, zones,
                           len([d for d in builder.devs if d]), balance)
        print 'The minimum number of hours before a partition can be ' \
              'reassigned is %s' % builder.min_part_hours
        if builder.devs:
            print 'Devices:    id  zone      ip address  port      name ' \
                  'weight partitions balance meta'
            weighted_parts = builder.parts * builder.replicas / \
                sum(d['weight'] for d in builder.devs if d is not None)
            for dev in builder.devs:
                if dev is None:
                    continue
                if not dev['weight']:
                    if dev['parts']:
                        balance = 999.99
                    else:
                        balance = 0
                else:
                    balance = 100.0 * dev['parts'] / \
                              (dev['weight'] * weighted_parts) - 100.0
                print '         %5d %5d %15s %5d %9s %6.02f %10s %7.02f %s' % \
                    (dev['id'], dev['zone'], dev['ip'], dev['port'],
                     dev['device'], dev['weight'], dev['parts'], balance,
                     dev['meta'])
        exit(EXIT_SUCCESS)

    def search():
        """
swift-ring-builder <builder_file> search <search-value>
    Shows information about matching devices.
        """
        if len(argv) < 4:
            print Commands.search.__doc__.strip()
            print
            print search_devs.__doc__.strip()
            exit(EXIT_ERROR)
        devs = search_devs(builder, argv[3])
        if not devs:
            print 'No matching devices found'
            exit(EXIT_ERROR)
        print 'Devices:    id  zone      ip address  port      name ' \
              'weight partitions balance meta'
        weighted_parts = builder.parts * builder.replicas / \
            sum(d['weight'] for d in builder.devs if d is not None)
        for dev in devs:
            if not dev['weight']:
                if dev['parts']:
                    balance = 999.99
                else:
                    balance = 0
            else:
                balance = 100.0 * dev['parts'] / \
                          (dev['weight'] * weighted_parts) - 100.0
            print '         %5d %5d %15s %5d %9s %6.02f %10s %7.02f %s' % \
                (dev['id'], dev['zone'], dev['ip'], dev['port'],
                 dev['device'], dev['weight'], dev['parts'], balance,
                 dev['meta'])
        exit(EXIT_SUCCESS)

    def list_parts():
        """
swift-ring-builder <builder_file> list_parts <search-value> [<search-value>] ..
    Returns a 2 column list of all the partitions that are assigned to any of
    the devices matching the search values given. The first column is the
    assigned partition number and the second column is the number of device
    matches for that partition. The list is ordered from most number of matches
    to least. If there are a lot of devices to match against, this command
    could take a while to run.
        """
        if len(argv) < 4:
            print Commands.list_parts.__doc__.strip()
            print
            print search_devs.__doc__.strip()
            exit(EXIT_ERROR)
        devs = []
        for arg in argv[3:]:
            devs.extend(search_devs(builder, arg) or [])
        if not devs:
            print 'No matching devices found'
            exit(EXIT_ERROR)
        devs = [d['id'] for d in devs]
        matches = [array('i') for x in xrange(builder.replicas)]
        for part in xrange(builder.parts):
            count = len([d for d in builder.get_part_devices(part)
                         if d['id'] in devs])
            if count:
                matches[builder.replicas - count].append(part)
        print 'Partition   Matches'
        for index, parts in enumerate(matches):
            for part in parts:
                print '%9d   %7d' % (part, builder.replicas - index)
        exit(EXIT_SUCCESS)

    def add():
        """
swift-ring-builder <builder_file> add
    z<zone>-<ip>:<port>/<device_name>_<meta> <weight>
    [z<zone>-<ip>:<port>/<device_name>_<meta> <weight>] ...

    Adds devices to the ring with the given information. No partitions will be
    assigned to the new device until after running 'rebalance'. This is so you
    can make multiple device changes and rebalance them all just once.
        """
        if len(argv) < 5 or len(argv) % 2 != 1:
            print Commands.add.__doc__.strip()
            exit(EXIT_ERROR)

        devs_and_weights = izip(islice(argv, 3, len(argv), 2),
                                islice(argv, 4, len(argv), 2))
        for devstr, weightstr in devs_and_weights:
            if not devstr.startswith('z'):
                print 'Invalid add value: %s' % devstr
                exit(EXIT_ERROR)
            i = 1
            while i < len(devstr) and devstr[i].isdigit():
                i += 1
            zone = int(devstr[1:i])
            rest = devstr[i:]

            if not rest.startswith('-'):
                print 'Invalid add value: %s' % devstr
                print "The on-disk ring builder is unchanged.\n"
                exit(EXIT_ERROR)
            i = 1
            if rest[i] == '[':
                i += 1
                while i < len(rest) and rest[i] != ']':
                    i += 1
                i += 1
                ip = rest[1:i].lstrip('[').rstrip(']')
                rest = rest[i:]
            else:
                while i < len(rest) and rest[i] in '0123456789.':
                    i += 1
                ip = rest[1:i]
                rest = rest[i:]

            if not rest.startswith(':'):
                print 'Invalid add value: %s' % devstr
                print "The on-disk ring builder is unchanged.\n"
                exit(EXIT_ERROR)
            i = 1
            while i < len(rest) and rest[i].isdigit():
                i += 1
            port = int(rest[1:i])
            rest = rest[i:]

            if not rest.startswith('/'):
                print 'Invalid add value: %s' % devstr
                print "The on-disk ring builder is unchanged.\n"
                exit(EXIT_ERROR)
            i = 1
            while i < len(rest) and rest[i] != '_':
                i += 1
            device_name = rest[1:i]
            rest = rest[i:]

            meta = ''
            if rest.startswith('_'):
                meta = rest[1:]

            try:
                weight = float(weightstr)
            except ValueError:
                print 'Invalid weight value: %s' % weightstr
                print "The on-disk ring builder is unchanged.\n"
                exit(EXIT_ERROR)

            if weight < 0:
                print 'Invalid weight value (must be positive): %s' % weightstr
                print "The on-disk ring builder is unchanged.\n"
                exit(EXIT_ERROR)

            for dev in builder.devs:
                if dev is None:
                    continue
                if dev['ip'] == ip and dev['port'] == port and \
                        dev['device'] == device_name:
                    print 'Device %d already uses %s:%d/%s.' % \
                          (dev['id'], dev['ip'], dev['port'], dev['device'])
                    print "The on-disk ring builder is unchanged.\n"
                    exit(EXIT_ERROR)

            next_dev_id = 0
            if builder.devs:
                next_dev_id = max(d['id'] for d in builder.devs if d) + 1
            builder.add_dev({'id': next_dev_id, 'zone': zone, 'ip': ip,
                             'port': port, 'device': device_name,
                             'weight': weight, 'meta': meta})
            if ':' in ip:
                print 'Device z%s-[%s]:%s/%s_"%s" with %s weight got id %s' % \
                      (zone, ip, port, device_name, meta, weight, next_dev_id)
            else:
                print 'Device z%s-%s:%s/%s_"%s" with %s weight got id %s' % \
                      (zone, ip, port, device_name, meta, weight, next_dev_id)
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(EXIT_SUCCESS)

    def set_weight():
        """
swift-ring-builder <builder_file> set_weight <search-value> <weight>
    [<search-value> <weight] ...

    Resets the devices' weights. No partitions will be reassigned to or from
    the device until after running 'rebalance'. This is so you can make
    multiple device changes and rebalance them all just once.
        """
        if len(argv) < 5 or len(argv) % 2 != 1:
            print Commands.set_weight.__doc__.strip()
            print
            print search_devs.__doc__.strip()
            exit(EXIT_ERROR)

        devs_and_weights = izip(islice(argv, 3, len(argv), 2),
                                islice(argv, 4, len(argv), 2))
        for devstr, weightstr in devs_and_weights:
            devs = search_devs(builder, devstr)
            weight = float(weightstr)
            if not devs:
                print("Search value \"%s\" matched 0 devices.\n"
                      "The on-disk ring builder is unchanged.\n"
                      % devstr)
                exit(EXIT_ERROR)
            if len(devs) > 1:
                print 'Matched more than one device:'
                for dev in devs:
                    print '    d%(id)sz%(zone)s-%(ip)s:%(port)s/%(device)s_' \
                          '"%(meta)s"' % dev
                if raw_input('Are you sure you want to update the weight for '
                             'these %s devices? (y/N) ' % len(devs)) != 'y':
                    print 'Aborting device modifications'
                    exit(EXIT_ERROR)
            for dev in devs:
                builder.set_dev_weight(dev['id'], weight)
                print 'd%(id)sz%(zone)s-%(ip)s:%(port)s/%(device)s_' \
                      '"%(meta)s" weight set to %(weight)s' % dev
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(EXIT_SUCCESS)

    def set_info():
        """
swift-ring-builder <builder_file> set_info
    <search-value> <ip>:<port>/<device_name>_<meta>
    [<search-value> <ip>:<port>/<device_name>_<meta>] ...

    For each search-value, resets the matched device's information.
    This information isn't used to assign partitions, so you can use
    'write_ring' afterward to rewrite the current ring with the newer
    device information. Any of the parts are optional in the final
    <ip>:<port>/<device_name>_<meta> parameter; just give what you
    want to change. For instance set_info d74 _"snet: 5.6.7.8" would
    just update the meta data for device id 74.
        """
        if len(argv) < 5 or len(argv) % 2 != 1:
            print Commands.set_info.__doc__.strip()
            print
            print search_devs.__doc__.strip()
            exit(EXIT_ERROR)

        searches_and_changes = izip(islice(argv, 3, len(argv), 2),
                                    islice(argv, 4, len(argv), 2))

        for search_value, change_value in searches_and_changes:
            devs = search_devs(builder, search_value)
            change = []
            if len(change_value) and change_value[0].isdigit():
                i = 1
                while (i < len(change_value) and
                       change_value[i] in '0123456789.'):
                    i += 1
                change.append(('ip', change_value[:i]))
                change_value = change_value[i:]
            elif len(change_value) and change_value[0] == '[':
                i = 1
                while i < len(change_value) and change_value[i] != ']':
                    i += 1
                i += 1
                change.append(('ip', change_value[:i].lstrip('[').rstrip(']')))
                change_value = change_value[i:]
            if change_value.startswith(':'):
                i = 1
                while i < len(change_value) and change_value[i].isdigit():
                    i += 1
                change.append(('port', int(change_value[1:i])))
                change_value = change_value[i:]
            if change_value.startswith('/'):
                i = 1
                while i < len(change_value) and change_value[i] != '_':
                    i += 1
                change.append(('device', change_value[1:i]))
                change_value = change_value[i:]
            if change_value.startswith('_'):
                change.append(('meta', change_value[1:]))
                change_value = ''
            if change_value or not change:
                raise ValueError('Invalid set info change value: %s' %
                                 repr(argv[4]))
            if not devs:
                print("Search value \"%s\" matched 0 devices.\n"
                      "The on-disk ring builder is unchanged.\n"
                      % search_value)
                exit(EXIT_ERROR)
            if len(devs) > 1:
                print 'Matched more than one device:'
                for dev in devs:
                    print '    %s' % format_device(dev)
                if raw_input('Are you sure you want to update the info for '
                             'these %s devices? (y/N) ' % len(devs)) != 'y':
                    print 'Aborting device modifications'
                    exit(EXIT_ERROR)
            for dev in devs:
                orig_dev_string = format_device(dev)
                test_dev = dict(dev)
                for key, value in change:
                    test_dev[key] = value
                for check_dev in builder.devs:
                    if not check_dev or check_dev['id'] == test_dev['id']:
                        continue
                    if check_dev['ip'] == test_dev['ip'] and \
                            check_dev['port'] == test_dev['port'] and \
                            check_dev['device'] == test_dev['device']:
                        print 'Device %d already uses %s:%d/%s.' % \
                              (check_dev['id'], check_dev['ip'],
                               check_dev['port'], check_dev['device'])
                        exit(EXIT_ERROR)
                for key, value in change:
                    dev[key] = value
                print 'Device %s is now %s' % (orig_dev_string,
                                               format_device(dev))
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(EXIT_SUCCESS)

    def remove():
        """
swift-ring-builder <builder_file> remove <search-value> [search-value ...]
    Removes the device(s) from the ring. This should normally just be used for
    a device that has failed. For a device you wish to decommission, it's best
    to set its weight to 0, wait for it to drain all its data, then use this
    remove command. This will not take effect until after running 'rebalance'.
    This is so you can make multiple device changes and rebalance them all just
    once.
        """
        if len(argv) < 4:
            print Commands.remove.__doc__.strip()
            print
            print search_devs.__doc__.strip()
            exit(EXIT_ERROR)

        for search_value in argv[3:]:
            devs = search_devs(builder, search_value)
            if not devs:
                print("Search value \"%s\" matched 0 devices.\n"
                      "The on-disk ring builder is unchanged.\n" % devstr)
                exit(EXIT_ERROR)
            if len(devs) > 1:
                print 'Matched more than one device:'
                for dev in devs:
                    print '    d%(id)sz%(zone)s-%(ip)s:%(port)s/%(device)s_' \
                          '"%(meta)s"' % dev
                if raw_input('Are you sure you want to remove these %s '
                             'devices? (y/N) ' % len(devs)) != 'y':
                    print 'Aborting device removals'
                    exit(EXIT_ERROR)
            for dev in devs:
                try:
                    builder.remove_dev(dev['id'])
                except exceptions.RingBuilderError, e:
                    print '-' * 79
                    print(
                        "An error occurred while removing device with id %d\n"
                        "This usually means that you attempted to remove\n"
                        "the last device in a ring. If this is the case,\n"
                        "consider creating a new ring instead.\n"
                        "The on-disk ring builder is unchanged.\n"
                        "Original exception message: %s" %
                        (dev['id'], e.message)
                        )
                    print '-' * 79
                    exit(EXIT_ERROR)

                print 'd%(id)sz%(zone)s-%(ip)s:%(port)s/%(device)s_' \
                      '"%(meta)s" marked for removal and will be removed' \
                      ' next rebalance.' % dev
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(EXIT_SUCCESS)

    def rebalance():
        """
swift-ring-builder <builder_file> rebalance
    Attempts to rebalance the ring by reassigning partitions that haven't been
    recently reassigned.
        """
        devs_changed = builder.devs_changed
        try:
            last_balance = builder.get_balance()
            parts, balance = builder.rebalance()
        except exceptions.RingBuilderError, e:
            print '-' * 79
            print ("An error has occurred during ring validation. Common\n"
                   "causes of failure are rings that are empty or do not\n"
                   "have enough devices to accommodate the replica count.\n"
                   "Original exception message:\n %s" % e.message
                   )
            print '-' * 79
            exit(EXIT_ERROR)
        if not parts:
            print 'No partitions could be reassigned.'
            print 'Either none need to be or none can be due to ' \
                  'min_part_hours [%s].' % builder.min_part_hours
            exit(EXIT_WARNING)
        if not devs_changed and abs(last_balance - balance) < 1:
            print 'Cowardly refusing to save rebalance as it did not change ' \
                  'at least 1%.'
            exit(EXIT_WARNING)
        try:
            builder.validate()
        except exceptions.RingValidationError, e:
            print '-' * 79
            print ("An error has occurred during ring validation. Common\n"
                   "causes of failure are rings that are empty or do not\n"
                   "have enough devices to accommodate the replica count.\n"
                   "Original exception message:\n %s" % e.message
                   )
            print '-' * 79
            exit(EXIT_ERROR)
        print 'Reassigned %d (%.02f%%) partitions. Balance is now %.02f.' % \
              (parts, 100.0 * parts / builder.parts, balance)
        status = EXIT_SUCCESS
        if balance > 5:
            print '-' * 79
            print 'NOTE: Balance of %.02f indicates you should push this ' % \
                  balance
            print '      ring, wait at least %d hours, and rebalance/repush.' \
                  % builder.min_part_hours
            print '-' * 79
            status = EXIT_WARNING
        ts = time()
        pickle.dump(builder.get_ring().to_dict(),
                    GzipFile(pathjoin(backup_dir, '%d.' % ts +
                        basename(ring_file)), 'wb'), protocol=2)
        pickle.dump(builder.to_dict(), open(pathjoin(backup_dir,
            '%d.' % ts + basename(argv[1])), 'wb'), protocol=2)
        pickle.dump(builder.get_ring().to_dict(), GzipFile(ring_file, 'wb'),
                    protocol=2)
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(status)

    def validate():
        """
swift-ring-builder <builder_file> validate
    Just runs the validation routines on the ring.
        """
        builder.validate()
        exit(EXIT_SUCCESS)

    def write_ring():
        """
swift-ring-builder <builder_file> write_ring
    Just rewrites the distributable ring file. This is done automatically after
    a successful rebalance, so really this is only useful after one or more
    'set_info' calls when no rebalance is needed but you want to send out the
    new device information.
        """
        ring_data = builder.get_ring()
        if not ring_data._replica2part2dev_id:
            if ring_data.devs:
                print 'Warning: Writing a ring with no partition ' \
                      'assignments but with devices; did you forget to run ' \
                      '"rebalance"?'
            else:
                print 'Warning: Writing an empty ring'
        pickle.dump(ring_data.to_dict(),
                    GzipFile(pathjoin(backup_dir, '%d.' % time() +
                        basename(ring_file)), 'wb'), protocol=2)
        pickle.dump(ring_data.to_dict(), GzipFile(ring_file, 'wb'), protocol=2)
        exit(EXIT_SUCCESS)

    def pretend_min_part_hours_passed():
        builder.pretend_min_part_hours_passed()
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(EXIT_SUCCESS)

    def set_min_part_hours():
        """
swift-ring-builder <builder_file> set_min_part_hours <hours>
    Changes the <min_part_hours> to the given <hours>. This should be set to
    however long a full replication/update cycle takes. We're working on a way
    to determine this more easily than scanning logs.
        """
        if len(argv) < 4:
            print Commands.set_min_part_hours.__doc__.strip()
            exit(EXIT_ERROR)
        builder.change_min_part_hours(int(argv[3]))
        print 'The minimum number of hours before a partition can be ' \
              'reassigned is now set to %s' % argv[3]
        pickle.dump(builder.to_dict(), open(argv[1], 'wb'), protocol=2)
        exit(EXIT_SUCCESS)


if __name__ == '__main__':
    if len(argv) < 2:
        print "swift-ring-builder %(MAJOR_VERSION)s.%(MINOR_VERSION)s\n" % \
              globals()
        print Commands.default.__doc__.strip()
        print
        cmds = [c for c, f in Commands.__dict__.iteritems()
                    if f.__doc__ and c[0] != '_' and c != 'default']
        cmds.sort()
        for cmd in cmds:
            print Commands.__dict__[cmd].__doc__.strip()
            print
        print search_devs.__doc__.strip()
        print
        for line in wrap(' '.join(cmds), 79, initial_indent='Quick list: ',
                         subsequent_indent='            '):
            print line
        print ('Exit codes: 0 = operation successful\n'
               '            1 = operation completed with warnings\n' \
               '            2 = error'
              )
        exit(EXIT_SUCCESS)

    if exists(argv[1]):
        try:
            builder = pickle.load(open(argv[1], 'rb'))
            if not hasattr(builder, 'devs'):
                builder_dict = builder
                builder = RingBuilder(1, 1, 1)
                builder.copy_from(builder_dict)
        except ImportError:  # Happens with really old builder pickles
            modules['swift.ring_builder'] = \
                modules['swift.common.ring.builder']
            builder = RingBuilder(1, 1, 1)
            builder.copy_from(pickle.load(open(argv[1], 'rb')))
        for dev in builder.devs:
            if dev and 'meta' not in dev:
                dev['meta'] = ''
    elif len(argv) < 3 or argv[2] != 'create':
        print 'Ring Builder file does not exist: %s' % argv[1]
        exit(EXIT_ERROR)

    backup_dir = pathjoin(dirname(argv[1]), 'backups')
    try:
        mkdir(backup_dir)
    except OSError, err:
        if err.errno != EEXIST:
            raise

    ring_file = argv[1]
    if ring_file.endswith('.builder'):
        ring_file = ring_file[:-len('.builder')]
    ring_file += '.ring.gz'

    if len(argv) == 2:
        command = "default"
    else:
        command = argv[2]
    Commands.__dict__.get(command, Commands.unknown)()
