Metadata-Version: 1.1
Name: tripleo-quickstart
Version: 2.1.0
Summary: tripleo-quickstart - Making it easy to get started with tripleo
Home-page: http://docs.openstack.org/developer/tripleo-quickstart/
Author: OpenStack
Author-email: openstack-dev@lists.openstack.org
License: UNKNOWN
Description: ========================
        Team and repository tags
        ========================
        
        .. image:: http://governance.openstack.org/badges/tripleo-quickstart.svg
            :target: http://governance.openstack.org/reference/tags/index.html
        
        .. Change things from this point on
        
        tripleo-quickstart
        ==================
        
        One of the barriers to entry for trying out TripleO and its derivatives has
        been the relative difficulty in getting an environment up quickly.
        
        This set of ansible roles is meant to help.
        
        Quickstart's default deployment method uses a physical machine, which is
        referred to as ``$VIRTHOST`` throughout this documentation. On this physical
        machine Quickstart sets up multiple virtual machines (VMs) and virtual networks
        using libvirt.
        
        One of the VMs is set up as **undercloud**, an all-in-one OpenStack cloud used
        by system administrators to deploy the **overcloud**, the end-user facing
        OpenStack installation, usually consisting of multiple VMs.
        
        You will need a ``$VIRTHOST`` with at least **16 GB** of RAM, preferably **32
        GB**, and you must be able to ``ssh`` to the virthost machine as root without a
        password from the machine running ansible.  Currently the virthost machine must
        be running a recent Red Hat-based Linux distribution (CentOS 7, RHEL 7, Fedora
        22 - only CentOS 7 is currently tested), but we hope to add support for non-Red
        Hat distributions too.
        
        ..  note::
            Running quickstart.sh commands as root is not suggested or supported.
        
        A quick way to test that your virthost machine is ready to rock is::
        
            ssh root@$VIRTHOST uname -a
        
        The defaults are meant to "just work", so it is as easy as downloading
        and running the ``quickstart.sh`` script.
        
        Getting the script
        ------------------
        
        You can download the ``quickstart.sh`` script with ``wget``::
        
            wget https://raw.githubusercontent.com/openstack/tripleo-quickstart/master/quickstart.sh
        
        Alternatively, you can clone this repository and run the script from there.
        
        Requirements
        ------------
        
        You need some software available on your local system before you can run
        ``quickstart.sh``. You can install the necessary dependencies by running::
        
            bash quickstart.sh --install-deps
        
        Deploying with instructions
        ---------------------------
        
        Deploy your virtual environment by running::
        
            bash quickstart.sh $VIRTHOST
        
        Where ``$VIRTHOST`` is the name of the host on which you want to install your
        virtual triple0 environment. The ``quickstart.sh`` script will install this
        repository along with ansible in a virtual environment on your Ansible host and
        run the quickstart playbook. Note, the quickstart playbook will delete the
        ``stack`` user on ``$VIRTHOST`` and recreate it.
        
        This script will output instructions at the end to access the deployed
        undercloud. If a release name is not given, ``newton`` is used.
        
        Deploying without instructions
        ------------------------------
        ::
        
            bash quickstart.sh --tags all $VIRTHOST
        
        You may choose to execute an end to end deployment without displaying the
        instructions and scripts provided by default.  Using the ``--tags all`` flag
        will instruct quickstart to provision the environment and deploy both the
        undercloud and overcloud.  Additionally a validation test will be executed to
        ensure the overcloud is functional.
        
        Deploying on localhost
        ----------------------
        ::
        
            bash quickstart.sh 127.0.0.2
        
        Please note the following when using quickstart to deploy tripleo directly on
        localhost.  Use the loopback address ``127.0.0.2`` in lieu of localhost as
        localhost is reserved by ansible and will not work correctly. The deployment
        should pass, however you may not be able to ssh to the overcloud nodes
        while using the default ssh config file. The ssh config file that is generated
        by quickstart e.g. ``~/.quickstart/ssh.config.ansible`` will try to proxy
        through the localhost to ssh to the localhost and will cause an error
        if ssh is not setup to support it.
        
        Enable Developer mode
        ---------------------
        
        If you are working on TripleO upstream development, and need to reproduce what
        runs in tripleo-ci, you will want to use developer mode.
        
        This will fetch the images produced by tripleo-ci instead of the ones produced
        by RDO. The incantation for a job using the quickstart defaults other than
        developer mode would be::
        
            bash devmode.sh $VIRTHOST
        
        The full set of developer mode instructions are available in :ref:`devmode`
        
        Feature Configuration and Nodes
        -------------------------------
        
        In previous versions of triple-quickstart a config file was used to determine
        not only the features that would be enabled in tripleo and openstack but also
        the number of nodes to be used. For instance "config/general_config/ha.yml" would
        configure pacemaker and ensure three controller nodes were provisioned.  This type
        of configuration is now deprecated but will still work through the Queens release.
        
        The feature and node configuration have been seperated into two distinct
        configuration files to allow users to explicity select the configuration known as
        "feature sets" and the nodes to be provisioned.  The feature set configuration
        can be found under tripleo-quickstart/config/general_config/ and the node
        configuration can be found under tripleo-quickstart/config/nodes/
        
        A more in depth description of the feature sets can be found in the documentation
        under :ref:`feature-configuration`
        
        A more in depth description of how to configure nodes can be found in the
        documentation under :ref:`node-configuration`
        
        Working With Quickstart Extras
        ------------------------------
        
        TripleO Quickstart is more than just a tool for quickly deploying a single machine
        TripleO instance; it is an easily extensible framework for deploying OpenStack.
        
        For a how-to please see :ref:`working-with-extras`
        
        Setting up libvirt guests only
        ------------------------------
        
        At times it is useful to only setup or provision libvirt guests without installing any
        TripleO code or rpms.  The tripleo-quickstart git repository is designed to provision
        libvirt guest environments.  Some may be familiar with an older TripleO tool called
        instack-virt-setup, these steps would replace that function.
        
        To deploy the undercloud node uninstalled and empty or blank overcloud nodes
        do the following.::
        
            bash quickstart.sh --tags all --playbook quickstart.yml $VIRTHOST
        
        To only deploy one node, the undercloud node do the following.::
        
            bash quickstart.sh --tags all --playbook quickstart.yml -e overcloud_nodes="" $VIRTHOST
        
        Documentation
        -------------
        
        The full documentation is in the ``doc/source`` directory, it can be built
        using::
        
            tox -e docs
        
        An up-to-date HTML version is available on docs.openstack.org_.
        
        .. _docs.openstack.org: http://docs.openstack.org/developer/tripleo-quickstart/
        
        Copyright
        ---------
        
        Copyright 2015-2016 Red Hat, Inc.
        
        Licensed under the Apache License, Version 2.0 (the "License"); you may
        not use this file except in compliance with the License. You may obtain
        a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
        
        Unless required by applicable law or agreed to in writing, software
        distributed under the License is distributed on an "AS IS" BASIS,
        WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
        See the License for the specific language governing permissions and
        limitations under the License.
        
        
Platform: UNKNOWN
Classifier: License :: OSI Approved :: Apache Software License
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Developers
Classifier: Intended Audience :: System Administrators
Classifier: Intended Audience :: Information Technology
Classifier: Topic :: Utilities
