# Copyright 2022 Hewlett Packard Enterprise Development LP
# Copyright 2018 Hewlett-Packard Development Company, L.P.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.


"""Provides iLO management interface. Talks to the iLO management engine
over RIBCL scripting language
"""

import copy
import os
import re
import xml.etree.ElementTree as etree

from oslo_utils import strutils
import requests
from requests.packages import urllib3
from requests.packages.urllib3 import exceptions as urllib3_exceptions
import six

from proliantutils import exception
from proliantutils.ilo import common
from proliantutils.ilo import firmware_controller
from proliantutils.ilo import mappings
from proliantutils.ilo import operations
from proliantutils import log
from proliantutils import utils


POWER_STATE = {
    'ON': 'Yes',
    'OFF': 'No',
}

BOOT_MODE_CMDS = [
    'GET_CURRENT_BOOT_MODE',
    'GET_PENDING_BOOT_MODE',
    'GET_SUPPORTED_BOOT_MODE',
    'SET_PENDING_BOOT_MODE'
]

LOG = log.get_logger(__name__)


class MaskedRequestData(object):
    def __init__(self, request_data):
        self.request_data = request_data

    def __str__(self):
        request_data_copy = copy.deepcopy(self.request_data)
        xml_data = request_data_copy.get('data')
        if xml_data:
            xml_data = re.sub(r'USER_LOGIN="(.*?)"', r'USER_LOGIN="*****"',
                              xml_data)
            xml_data = re.sub(r'PASSWORD="(.*?)"', r'PASSWORD="*****"',
                              xml_data)
            request_data_copy['data'] = xml_data
        return str(request_data_copy)


class RIBCLOperations(operations.IloOperations):
    """iLO class for RIBCL interface for iLO.

    Implements the base class using RIBCL scripting language to talk
    to the iLO.
    """

    def __init__(self, host, login, password, timeout=60, port=443,
                 cacert=None):
        """Constructor for RIBCLOperations.

        """
        self.host = host
        self.login = login
        self.password = password
        self.timeout = timeout
        self.port = port
        self.cacert = cacert

        # By default, requests logs following message if verify=False
        #   InsecureRequestWarning: Unverified HTTPS request is
        #   being made. Adding certificate verification is strongly advised.
        # Just disable the warning if user intentionally did this.
        if self.cacert is None:
            urllib3.disable_warnings(urllib3_exceptions.InsecureRequestWarning)

    def init_model_based_tags(self, model):
        """Initializing the model based memory and NIC information tags.

        It should be called just after instantiating a RIBCL object.

            ribcl = ribcl.RIBCLOperations(host, login, password, timeout,
                                           port, cacert=cacert)
            model = ribcl.get_product_name()
            ribcl.init_model_based_tags(model)

        Again, model attribute is also set here on the RIBCL object.

        :param model: the model string
        """
        self.model = model
        if 'G7' in self.model:
            self.MEMORY_SIZE_TAG = "MEMORY_SIZE"
            self.MEMORY_SIZE_NOT_PRESENT_TAG = "Not Installed"
            self.NIC_INFORMATION_TAG = "NIC_INFOMATION"
        else:
            self.MEMORY_SIZE_TAG = "TOTAL_MEMORY_SIZE"
            self.MEMORY_SIZE_NOT_PRESENT_TAG = "N/A"
            self.NIC_INFORMATION_TAG = "NIC_INFORMATION"

    def _request_ilo(self, root, extra_headers=None):
        """Send RIBCL XML data to iLO.

        This function sends the XML request to the ILO and
        receives the output from ILO.

        :raises: IloConnectionError() if unable to send the request.
        """
        if self.port:
            urlstr = 'https://%s:%d/ribcl' % (self.host, self.port)
        else:
            urlstr = 'https://%s/ribcl' % (self.host)
        xml = self._serialize_xml(root)
        headers = {"Content-length": str(len(xml))}
        if extra_headers:
            headers.update(extra_headers)

        kwargs = {'headers': headers, 'data': xml}
        if self.cacert is not None:
            kwargs['verify'] = self.cacert
        else:
            kwargs['verify'] = False

        try:
            LOG.debug(self._("POST %(url)s with request data: "
                             "%(request_data)s"),
                      {'url': urlstr,
                       'request_data': MaskedRequestData(kwargs)})
            response = requests.post(urlstr, **kwargs)
            response.raise_for_status()
        except Exception as e:
            LOG.debug(self._("Unable to connect to iLO. %s"), e)
            raise exception.IloConnectionError(e)
        return response.text

    def _create_dynamic_xml(self, cmdname, tag_name, mode, subelements=None):
        """Create RIBCL XML to send to iLO.

        This function creates the dynamic xml required to be sent
        to the ILO for all the APIs.

        :param cmdname: the API which needs to be implemented.
        :param tag_name: the tag info under which ILO has defined
                         the particular API.
        :param mode: 'read' or 'write'
        :param subelements: dictionary containing subelements of the
                            particular API tree.
        :returns: the etree.Element for the root of the RIBCL XML
        """
        root = etree.Element('RIBCL', VERSION="2.0")
        login = etree.SubElement(
            root, 'LOGIN', USER_LOGIN=self.login, PASSWORD=self.password)
        tagname = etree.SubElement(login, tag_name, MODE=mode)
        subelements = subelements or {}

        etree.SubElement(tagname, cmdname)

        if six.PY2:
            root_iterator = root.getiterator(cmdname)
        else:
            root_iterator = root.iter(cmdname)

        for cmd in root_iterator:
            for key, value in subelements.items():
                cmd.set(key, value)

        return root

    def _serialize_xml(self, root):
        """Serialize XML data into string

        It serializes the dynamic xml created and converts
        it to a string. This is done before sending the
        xml to the ILO.

        :param root: root of the dynamic xml.
        """
        if hasattr(etree, 'tostringlist'):
            if six.PY3:
                xml_content_list = [
                    x.decode("utf-8") for x in etree.tostringlist(root)]
            else:
                xml_content_list = etree.tostringlist(root)

            xml = '\r\n'.join(xml_content_list) + '\r\n'
        else:
            if six.PY3:
                xml_content = etree.tostring(root).decode("utf-8")
            else:
                xml_content = etree.tostring(root)
            xml = xml_content + '\r\n'
        return xml

    def _parse_output(self, xml_response):
        """Parse the response XML from iLO.

        This function parses the output received from ILO.
        As the output contains multiple XMLs, it extracts
        one xml at a time and loops over till all the xmls
        in the response are exhausted.

        It returns the data to APIs either in dictionary
        format or as the string.
        It creates the dictionary only if the Ilo response
        contains the data under the requested RIBCL command.
        If the Ilo response contains only the string,
        then the string is returned back.
        """
        count = 0
        xml_dict = {}
        resp_message = None
        xml_start_pos = []
        for m in re.finditer(r"\<\?xml", xml_response):
            xml_start_pos.append(m.start())
        while count < len(xml_start_pos):
            if (count == len(xml_start_pos) - 1):
                result = xml_response[xml_start_pos[count]:]
            else:
                start = xml_start_pos[count]
                end = xml_start_pos[count + 1]
                result = xml_response[start:end]
            result = result.strip()
            message = etree.fromstring(result)
            resp = self._validate_message(message)
            if hasattr(resp, 'tag'):
                xml_dict = self._elementtree_to_dict(resp)
            elif resp is not None:
                resp_message = resp
            count = count + 1

        if xml_dict:
            return xml_dict
        elif resp_message is not None:
            return resp_message

    def _elementtree_to_dict(self, element):
        """Convert XML elementtree to dictionary.

        Converts the actual response from the ILO for an API
        to the dictionary.
        """
        node = {}
        text = getattr(element, 'text')
        if text is not None:
            text = text.strip()
            if len(text) != 0:
                node['text'] = text
        node.update(element.items())  # element's attributes
        child_nodes = {}
        for child in element:  # element's children
            child_nodes.setdefault(child.tag, []).append(
                self._elementtree_to_dict(child))
        # convert all single-element lists into non-lists
        for key, value in child_nodes.items():
            if len(value) == 1:
                child_nodes[key] = value[0]
        node.update(child_nodes.items())
        return node

    def _validate_message(self, message):
        """Validate XML response from iLO.

        This function validates the XML response to see
        if the exit status is 0 or not in the response.
        If the status is non-zero it raises exception.
        """
        if message.tag != 'RIBCL':
            # the true case shall be unreachable for response
            # XML from Ilo as all messages are tagged with RIBCL
            # but still raise an exception if any invalid
            # XML response is returned by Ilo. Set status to some
            # arbitary non-zero value.
            status = -1
            raise exception.IloClientInternalError(message, status)

        for child in message:
            if child.tag != 'RESPONSE':
                return message
            status = int(child.get('STATUS'), 16)
            msg = child.get('MESSAGE')
            if status == 0 and msg != 'No error':
                return msg
            if status != 0:
                if 'syntax error' in msg or 'Feature not supported' in msg:
                    for cmd in BOOT_MODE_CMDS:
                        if cmd in msg:
                            platform = self.get_product_name()
                            msg = ("%(cmd)s is not supported on %(platform)s" %
                                   {'cmd': cmd, 'platform': platform})
                            LOG.debug(self._("Got invalid response with "
                                             "message: '%(message)s'"),
                                      {'message': msg})
                            raise (exception.IloCommandNotSupportedError
                                   (msg, status))
                    else:
                        LOG.debug(self._("Got invalid response with "
                                         "message: '%(message)s'"),
                                  {'message': msg})
                        raise exception.IloClientInternalError(msg, status)
                if (status in exception.IloLoginFailError.statuses
                        or msg in exception.IloLoginFailError.messages):
                    LOG.debug(self._("Got invalid response with "
                                     "message: '%(message)s'"),
                              {'message': msg})
                    raise exception.IloLoginFailError(msg, status)

                LOG.debug(self._("Got invalid response with "
                                 "message: '%(message)s'"),
                          {'message': msg})
                raise exception.IloError(msg, status)

    def _execute_command(self, create_command, tag_info, mode, dic={}):
        """Execute a command on the iLO.

        Common infrastructure used by all APIs to send/get
        response from ILO.
        """
        xml = self._create_dynamic_xml(
            create_command, tag_info, mode, dic)
        d = self._request_ilo(xml)
        data = self._parse_output(d)
        LOG.debug(self._("Received response data: %s"), data)
        return data

    def get_all_licenses(self):
        """Retrieve license type, key, installation date, etc."""
        data = self._execute_command('GET_ALL_LICENSES', 'RIB_INFO', 'read')
        d = {}
        for key, val in data['GET_ALL_LICENSES']['LICENSE'].items():
            if isinstance(val, dict):
                d[key] = data['GET_ALL_LICENSES']['LICENSE'][key]['VALUE']
        return d

    def get_product_name(self):
        """Get the model name of the queried server."""
        data = self._execute_command(
            'GET_PRODUCT_NAME', 'SERVER_INFO', 'read')

        return data['GET_PRODUCT_NAME']['PRODUCT_NAME']['VALUE']

    def get_host_power_status(self):
        """Request the power state of the server."""
        data = self._execute_command(
            'GET_HOST_POWER_STATUS', 'SERVER_INFO', 'read')
        return data['GET_HOST_POWER']['HOST_POWER']

    def get_one_time_boot(self):
        """Retrieves the current setting for the one time boot."""
        data = self._execute_command(
            'GET_ONE_TIME_BOOT', 'SERVER_INFO', 'read')
        return data['ONE_TIME_BOOT']['BOOT_TYPE']['VALUE']

    def get_vm_status(self, device='FLOPPY'):
        """Returns the virtual media drive status."""
        dic = {'DEVICE': device.upper()}
        data = self._execute_command(
            'GET_VM_STATUS', 'RIB_INFO', 'read', dic)
        return data['GET_VM_STATUS']

    def reset_server(self):
        """Resets the server."""
        data = self._execute_command('RESET_SERVER', 'SERVER_INFO', 'write')
        return data

    def press_pwr_btn(self):
        """Simulates a physical press of the server power button."""
        data = self._execute_command('PRESS_PWR_BTN', 'SERVER_INFO', 'write')
        return data

    def hold_pwr_btn(self):
        """Simulate a physical press and hold of the server power button."""
        dic = {'TOGGLE': 'NO'}
        data = self._execute_command(
            'HOLD_PWR_BTN', 'SERVER_INFO', 'write', dic)
        return data

    def set_host_power(self, power):
        """Toggle the power button of server.

        :param power: 'ON' or 'OFF'
        """
        if power.upper() in POWER_STATE:
            dic = {'HOST_POWER': POWER_STATE[power.upper()]}
            data = self._execute_command(
                'SET_HOST_POWER', 'SERVER_INFO', 'write', dic)
            return data
        else:
            raise exception.IloInvalidInputError(
                "Invalid input. The expected input is ON or OFF.")

    def set_one_time_boot(self, value):
        """Configures a single boot from a specific device.

        :param value: specific device to which the boot option is set
        """
        dic = {'value': value}
        data = self._execute_command(
            'SET_ONE_TIME_BOOT', 'SERVER_INFO', 'write', dic)
        return data

    def insert_virtual_media(self, url, device='FLOPPY'):
        """Notifies iLO of the location of a virtual media diskette image."""
        dic = {
            'DEVICE': device.upper(),
            'IMAGE_URL': url,
        }

        # Validate url
        utils.validate_href(url)

        data = self._execute_command(
            'INSERT_VIRTUAL_MEDIA', 'RIB_INFO', 'write', dic)
        return data

    def eject_virtual_media(self, device='FLOPPY'):
        """Ejects the Virtual Media image if one is inserted."""
        vm_status = self.get_vm_status(device=device)
        if vm_status['IMAGE_INSERTED'] == 'NO':
            return

        dic = {'DEVICE': device.upper()}
        self._execute_command(
            'EJECT_VIRTUAL_MEDIA', 'RIB_INFO', 'write', dic)

    def set_vm_status(self, device='FLOPPY',
                      boot_option='BOOT_ONCE', write_protect='YES'):
        """Sets the Virtual Media drive status

        It also allows the boot options for booting from the virtual media.
        """
        dic = {'DEVICE': device.upper()}
        xml = self._create_dynamic_xml(
            'SET_VM_STATUS', 'RIB_INFO', 'write', dic)

        if six.PY2:
            child_iterator = xml.getiterator()
        else:
            child_iterator = xml.iter()

        for child in child_iterator:
            if child.tag == 'SET_VM_STATUS':
                etree.SubElement(child, 'VM_BOOT_OPTION',
                                 VALUE=boot_option.upper())
                etree.SubElement(child, 'VM_WRITE_PROTECT',
                                 VALUE=write_protect.upper())

        d = self._request_ilo(xml)
        data = self._parse_output(d)
        return data

    def get_current_boot_mode(self):
        """Retrieves the current boot mode settings."""
        data = self._execute_command(
            'GET_CURRENT_BOOT_MODE', 'SERVER_INFO', 'read')
        return data['GET_CURRENT_BOOT_MODE']['BOOT_MODE']['VALUE']

    def get_pending_boot_mode(self):
        """Retrieves the pending boot mode settings."""
        data = self._execute_command(
            'GET_PENDING_BOOT_MODE', 'SERVER_INFO', 'read')
        return data['GET_PENDING_BOOT_MODE']['BOOT_MODE']['VALUE']

    def get_supported_boot_mode(self):
        """Retrieves the supported boot mode.

        :returns: any one of the following proliantutils.ilo.constants:

            SUPPORTED_BOOT_MODE_LEGACY_BIOS_ONLY,
            SUPPORTED_BOOT_MODE_UEFI_ONLY,
            SUPPORTED_BOOT_MODE_LEGACY_BIOS_AND_UEFI

        """
        data = self._execute_command(
            'GET_SUPPORTED_BOOT_MODE', 'SERVER_INFO', 'read')
        supported_boot_mode = (
            data['GET_SUPPORTED_BOOT_MODE']['SUPPORTED_BOOT_MODE']['VALUE'])
        return mappings.GET_SUPPORTED_BOOT_MODE_RIBCL_MAP.get(
            supported_boot_mode)

    def set_pending_boot_mode(self, value):
        """Configures the boot mode of the system from a specific boot mode."""
        dic = {'value': value}
        data = self._execute_command(
            'SET_PENDING_BOOT_MODE', 'SERVER_INFO', 'write', dic)
        return data

    def _get_persistent_boot(self):
        """Retrieves the current boot mode settings."""
        data = self._execute_command(
            'GET_PERSISTENT_BOOT', 'SERVER_INFO', 'read')
        if data is not None:
            return data['PERSISTENT_BOOT']['DEVICE']

    def get_persistent_boot_device(self):
        """Get the current persistent boot device set for the host."""
        result = self._get_persistent_boot()
        boot_mode = self._check_boot_mode(result)

        if boot_mode == 'bios':
            return result[0]['value']

        value = result[0]['DESCRIPTION']
        if 'HP iLO Virtual USB CD' in value:
            return 'CDROM'

        elif 'NIC' in value or 'PXE' in value:
            return 'NETWORK'

        elif common.isDisk(value):
            return 'HDD'

        else:
            return None

    def _set_persistent_boot(self, values=[]):
        """Configures a boot from a specific device."""

        xml = self._create_dynamic_xml(
            'SET_PERSISTENT_BOOT', 'SERVER_INFO', 'write')

        if six.PY2:
            child_iterator = xml.getiterator()
        else:
            child_iterator = xml.iter()

        for child in child_iterator:
            for val in values:
                if child.tag == 'SET_PERSISTENT_BOOT':
                    etree.SubElement(child, 'DEVICE', VALUE=val)
        d = self._request_ilo(xml)
        data = self._parse_output(d)
        return data

    def update_persistent_boot(self, device_type=[]):

        valid_devices = ['NETWORK',
                         'HDD',
                         'CDROM']

        # Check if the input is valid
        for item in device_type:
            if item.upper() not in valid_devices:
                raise exception.IloInvalidInputError(
                    "Invalid input. Valid devices: NETWORK, HDD or CDROM.")

        result = self._get_persistent_boot()
        boot_mode = self._check_boot_mode(result)
        if boot_mode == 'bios':
            self._set_persistent_boot(device_type)
            return

        device_list = []
        for item in device_type:
            dev = item.upper()
            if dev == 'NETWORK':
                nic_list = self._get_nic_boot_devices(result)
                device_list.extend(nic_list)
            if dev == 'HDD':
                disk_list = self._get_disk_boot_devices(result)
                device_list.extend(disk_list)
            if dev == 'CDROM':
                virtual_list = self._get_virtual_boot_devices(result)
                device_list.extend(virtual_list)

        if not device_list:
            platform = self.get_product_name()
            msg = ("\'%(device)s\' is not configured as boot device on "
                   "this system of type %(platform)s."
                   % {'device': device_type[0], 'platform': platform})
            raise (exception.IloInvalidInputError(msg))

        self._set_persistent_boot(device_list)

    def _check_boot_mode(self, result):

        if 'DESCRIPTION' in result[0]:
            return 'uefi'
        else:
            return 'bios'

    def _get_nic_boot_devices(self, result):
        nw_identifier = "NIC"
        pxe_enabled = "PXE"
        iscsi_identifier = "iSCSI"
        nic_list = []
        pxe_nic_list = []
        iscsi_nic_list = []
        try:
            for item in result:
                if pxe_enabled in item["DESCRIPTION"]:
                    pxe_nic_list.append(item["value"])
                elif iscsi_identifier in item["DESCRIPTION"]:
                    iscsi_nic_list.append(item["value"])
                elif nw_identifier in item["DESCRIPTION"]:
                    nic_list.append(item["value"])
        except KeyError as e:
            msg = "_get_nic_boot_devices failed with the KeyError:%s"
            raise exception.IloError((msg) % e)

        all_nics = pxe_nic_list + nic_list + iscsi_nic_list
        return all_nics

    def _get_disk_boot_devices(self, result):
        disk_list = []
        try:
            for item in result:
                if common.isDisk(item["DESCRIPTION"]):
                    disk_list.append(item["value"])
        except KeyError as e:
            msg = "_get_disk_boot_devices failed with the KeyError:%s"
            raise exception.IloError((msg) % e)

        return disk_list

    def _request_host(self):
        """Request host info from the server."""
        urlstr = 'https://%s/xmldata?item=all' % (self.host)
        kwargs = {}
        if self.cacert is not None:
            kwargs['verify'] = self.cacert
        else:
            kwargs['verify'] = False
        try:
            response = requests.get(urlstr, **kwargs)
            response.raise_for_status()
        except Exception as e:
            raise IloConnectionError(e)

        return response.text

    def get_host_uuid(self):
        """Request host UUID of the server.

        :returns: the host UUID of the server
        :raises: IloConnectionError if failed connecting to the iLO.
        """
        xml = self._request_host()
        root = etree.fromstring(xml)
        data = self._elementtree_to_dict(root)
        return data['HSI']['SPN']['text'], data['HSI']['cUUID']['text']

    def get_host_health_data(self, data=None):
        """Request host health data of the server.

        :param: the data to retrieve from the server, defaults to None.
        :returns: the dictionary containing the embedded health data.
        :raises: IloConnectionError if failed connecting to the iLO.
        :raises: IloError, on an error from iLO.
        """
        if not data or data and "GET_EMBEDDED_HEALTH_DATA" not in data:
            data = self._execute_command(
                'GET_EMBEDDED_HEALTH', 'SERVER_INFO', 'read')
        return data

    def get_host_health_present_power_reading(self, data=None):
        """Request the power consumption of the server.

        :param: the data to retrieve from the server, defaults to None.
        :returns: the dictionary containing the power readings.
        :raises: IloConnectionError if failed connecting to the iLO.
        :raises: IloError, on an error from iLO.
        """
        data = self.get_host_health_data(data)
        return (data['GET_EMBEDDED_HEALTH_DATA']['POWER_SUPPLIES']
                    ['POWER_SUPPLY_SUMMARY']
                    ['PRESENT_POWER_READING']['VALUE'])

    def get_host_health_power_supplies(self, data=None):
        """Request the health power supply information.

        :param: the data to retrieve from the server, defaults to None.
        :returns: the dictionary containing the power supply information.
        :raises: IloConnectionError if failed connecting to the iLO.
        :raises: IloError, on an error from iLO.
        """
        data = self.get_host_health_data(data)
        d = (data['GET_EMBEDDED_HEALTH_DATA']['POWER_SUPPLIES']['SUPPLY'])
        if not isinstance(d, list):
            d = [d]
        return d

    def get_host_health_temperature_sensors(self, data=None):
        """Get the health Temp Sensor report.

        :param: the data to retrieve from the server, defaults to None.
        :returns: the dictionary containing the temperature sensors
            information.
        :raises: IloConnectionError if failed connecting to the iLO.
        :raises: IloError, on an error from iLO.
        """
        data = self.get_host_health_data(data)
        d = data['GET_EMBEDDED_HEALTH_DATA']['TEMPERATURE']['TEMP']
        if not isinstance(d, list):
            d = [d]
        return d

    def get_host_health_fan_sensors(self, data=None):
        """Get the health Fan Sensor Report.

        :param: the data to retrieve from the server, defaults to None.
        :returns: the dictionary containing the fan sensor information.
        :raises: IloConnectionError if failed connecting to the iLO.
        :raises: IloError, on an error from iLO.
        """
        data = self.get_host_health_data(data)
        d = data['GET_EMBEDDED_HEALTH_DATA']['FANS']['FAN']
        if not isinstance(d, list):
            d = [d]
        return d

    def get_host_health_at_a_glance(self, data=None):
        """Get the health at a glance Report.

        :param: the data to retrieve from the server, defaults to None.
        :returns: the dictionary containing the health at a glance information.
        :raises: IloConnectionError if failed connecting to the iLO.
        :raises: IloError, on an error from iLO.
        """
        data = self.get_host_health_data(data)
        return data['GET_EMBEDDED_HEALTH_DATA']['HEALTH_AT_A_GLANCE']

    def get_host_power_readings(self):
        """Retrieves the host power readings.

        :param: the data to retrieve from the server, defaults to None.
        :returns: the dictionary containing the power readings.
        :raises: IloConnectionError if failed connecting to the iLO.
        :raises: IloError, on an error from iLO.
        """
        data = self._execute_command(
            'GET_POWER_READINGS', 'SERVER_INFO', 'read')
        return data['GET_POWER_READINGS']

    def reset_ilo(self):
        """Resets the iLO.

        :raises: IloError, on an error from iLO.
        :raises: IloConnectionError, if iLO is not up after reset.
        """
        self._execute_command('RESET_RIB', 'RIB_INFO', 'write')
        # Check if iLO is up again after reset.
        common.wait_for_ilo_after_reset(self)

    def reset_ilo_credential(self, password):
        """Resets the iLO password.

        :param password: The password to be set.
        :raises: IloError, if account not found or on an error from iLO.
        """

        dic = {'USER_LOGIN': self.login}
        root = self._create_dynamic_xml(
            'MOD_USER', 'USER_INFO', 'write', dic)

        element = root.find('LOGIN/USER_INFO/MOD_USER')
        etree.SubElement(element, 'PASSWORD', VALUE=password)
        d = self._request_ilo(root)
        self._parse_output(d)

    def _get_virtual_boot_devices(self, result):
        virtual_list = []
        dev_desc = "HP iLO Virtual USB CD"
        try:
            for item in result:
                if dev_desc in item["DESCRIPTION"]:
                    virtual_list.append(item["value"])
        except KeyError as e:
            msg = "_get_virtual_boot_devices failed with the KeyError:%s"
            raise exception.IloError((msg) % e)

        return virtual_list

    def get_essential_properties(self):
        """Gets essential scheduling properties as required by ironic

        :returns: a dictionary of server properties like memory size,
                  disk size, number of cpus, cpu arch, port numbers
                  and mac addresses.
        :raises:IloError if iLO returns an error in command execution.

        """
        data = self.get_host_health_data()
        properties = {
            'memory_mb': self._parse_memory_embedded_health(data)
        }
        cpus, cpu_arch = self._parse_processor_embedded_health(data)
        properties['cpus'] = cpus
        properties['cpu_arch'] = cpu_arch
        properties['local_gb'] = self._parse_storage_embedded_health(data)
        macs = self._parse_nics_embedded_health(data)
        return_value = {'properties': properties, 'macs': macs}
        return return_value

    def get_server_capabilities(self):
        """Gets server properties which can be used for scheduling

        :returns: a dictionary of hardware properties like firmware
                  versions, server model.
        :raises: IloError, if iLO returns an error in command execution.
        """
        capabilities = {}
        data = self.get_host_health_data()
        ilo_firmware = self._get_ilo_firmware_version(data)
        if ilo_firmware:
            capabilities.update(ilo_firmware)
        rom_firmware = self._get_rom_firmware_version(data)
        if rom_firmware:
            capabilities.update(rom_firmware)
        capabilities.update({'server_model': self.get_product_name()})
        capabilities.update(self._get_number_of_gpu_devices_connected(data))
        boot_modes = common.get_supported_boot_modes(
            self.get_supported_boot_mode())
        capabilities.update({
            'boot_mode_bios': boot_modes.boot_mode_bios,
            'boot_mode_uefi': boot_modes.boot_mode_uefi})
        return capabilities

    def _parse_memory_embedded_health(self, data):
        """Parse the get_host_health_data() for essential properties

        :param data: the output returned by get_host_health_data()
        :returns: memory size in MB.
        :raises IloError, if unable to get the memory details.
        """
        memory_mb = 0
        memory = self._get_memory_details_value_based_on_model(data)

        if memory is None:
            msg = "Unable to get memory data. Error: Data missing"
            raise exception.IloError(msg)

        total_memory_size = 0
        for memory_item in memory:
            memsize = memory_item[self.MEMORY_SIZE_TAG]["VALUE"]
            if memsize != self.MEMORY_SIZE_NOT_PRESENT_TAG:
                memory_bytes = (
                    strutils.string_to_bytes(
                        memsize.replace(' ', ''), return_int=True))
                memory_mb = int(memory_bytes / (1024 * 1024))
                total_memory_size = total_memory_size + memory_mb
        return total_memory_size

    def _parse_processor_embedded_health(self, data):
        """Parse the get_host_health_data() for essential properties

        :param data: the output returned by get_host_health_data()
        :returns: processor details like cpu arch and number of cpus.

        """
        processor = self.get_value_as_list((data['GET_EMBEDDED_HEALTH_DATA']
                                           ['PROCESSORS']), 'PROCESSOR')
        if processor is None:
            msg = "Unable to get cpu data. Error: Data missing"
            raise exception.IloError(msg)
        cpus = 0
        for proc in processor:
            for val in proc.values():
                processor_detail = val['VALUE']
                proc_core_threads = processor_detail.split('; ')
                for x in proc_core_threads:
                    if "thread" in x:
                        v = x.split()
                        try:
                            cpus = cpus + int(v[0])
                        except ValueError:
                            msg = ("Unable to get cpu data. "
                                   "The Value %s returned couldn't be "
                                   "manipulated to get number of "
                                   "actual processors" % processor_detail)
                            raise exception.IloError(msg)
        cpu_arch = 'x86_64'
        return cpus, cpu_arch

    def _parse_storage_embedded_health(self, data):
        """Gets the storage data from get_embedded_health

        Parse the get_host_health_data() for essential properties

        :param data: the output returned by get_host_health_data()
        :returns: disk size in GB.

        """
        local_gb = 0
        storage = self.get_value_as_list(data['GET_EMBEDDED_HEALTH_DATA'],
                                         'STORAGE')
        if storage is None:
            # We dont raise exception because this dictionary
            # is available only when RAID is configured.
            # If we raise error here then we will always fail
            # inspection where this module is consumed. Hence
            # as a workaround just return 0.
            return local_gb

        minimum = local_gb

        for item in storage:
            cntlr = self.get_value_as_list(item, 'CONTROLLER')
            if cntlr is None:
                continue
            for s in cntlr:
                drive = self.get_value_as_list(s, 'LOGICAL_DRIVE')
                if drive is None:
                    continue
                for item in drive:
                    for key, val in item.items():
                        if key == 'CAPACITY':
                            capacity = val['VALUE']
                            local_bytes = (strutils.string_to_bytes(
                                           capacity.replace(' ', ''),
                                           return_int=True))
                            local_gb = int(local_bytes / (1024 * 1024 * 1024))
                            if minimum >= local_gb or minimum == 0:
                                minimum = local_gb

        # Return disk size 1 less than the actual disk size. This prevents
        # the deploy to fail from Nova when root_gb is same as local_gb
        # in Ironic. When the disk size is used as root_device hints,
        # then it should be given as the actual size i.e.
        # ironic (node.properties['local_gb'] + 1) else root device
        # hint will fail.
        if minimum:
            minimum = minimum - 1
        return minimum

    def get_value_as_list(self, dictionary, key):
        """Helper function to check and convert a value to list.

        Helper function to check and convert a value to json list.
        This helps the ribcl data to be generalized across the servers.

        :param dictionary: a dictionary to check in if key is present.
        :param key: key to be checked if thats present in the given dictionary.

        :returns the data converted to a list.
        """
        if key not in dictionary:
            return None
        value = dictionary[key]
        if not isinstance(value, list):
            return [value]
        else:
            return value

    def _parse_nics_embedded_health(self, data):
        """Gets the NIC details from get_embedded_health data

         Parse the get_host_health_data() for essential properties

        :param data: the output returned by get_host_health_data()
        :returns: a dictionary of port numbers and their corresponding
                  mac addresses.
        :raises IloError, if unable to get NIC data.

        """
        nic_data = self.get_value_as_list((data['GET_EMBEDDED_HEALTH_DATA']
                                          [self.NIC_INFORMATION_TAG]), 'NIC')

        if nic_data is None:
            msg = "Unable to get NIC details. Data missing"
            raise exception.IloError(msg)
        nic_dict = {}
        for item in nic_data:
            try:
                port = item['NETWORK_PORT']['VALUE']
                mac = item['MAC_ADDRESS']['VALUE']
                self._update_nic_data_from_nic_info_based_on_model(nic_dict,
                                                                   item, port,
                                                                   mac)

            except KeyError:
                msg = "Unable to get NIC details. Data missing"
                raise exception.IloError(msg)

        return nic_dict

    def _get_firmware_embedded_health(self, data):
        """Parse the get_host_health_data() for server capabilities

        :param data: the output returned by get_host_health_data()
        :returns: a dictionary of firmware name and firmware version.

        """
        firmware = self.get_value_as_list(data['GET_EMBEDDED_HEALTH_DATA'],
                                          'FIRMWARE_INFORMATION')
        if firmware is None:
            return None
        return dict((y['FIRMWARE_NAME']['VALUE'],
                     y['FIRMWARE_VERSION']['VALUE'])
                    for x in firmware for y in x.values())

    def _get_rom_firmware_version(self, data):
        """Gets the rom firmware version for server capabilities

        Parse the get_host_health_data() to retreive the firmware
        details.

        :param data: the output returned by get_host_health_data()
        :returns: a dictionary of rom firmware version.

        """
        firmware_details = self._get_firmware_embedded_health(data)
        if firmware_details:
            try:
                rom_firmware_version = (
                    firmware_details['HP ProLiant System ROM'])
                return {'rom_firmware_version': rom_firmware_version}
            except KeyError:
                return None

    def _get_ilo_firmware_version(self, data):
        """Gets the ilo firmware version for server capabilities

        Parse the get_host_health_data() to retreive the firmware
        details.

        :param data: the output returned by get_host_health_data()
        :returns: a dictionary of iLO firmware version.

        """
        firmware_details = self._get_firmware_embedded_health(data)
        if firmware_details:
            try:
                return {'ilo_firmware_version': firmware_details['iLO']}
            except KeyError:
                return None

    def get_ilo_firmware_version_as_major_minor(self):
        """Gets the ilo firmware version for server capabilities

        Parse the get_host_health_data() to retreive the firmware
        details.

        :param data: the output returned by get_host_health_data()
        :returns: String with the format "<major>.<minor>" or None.

        """
        data = self.get_host_health_data()
        firmware_details = self._get_firmware_embedded_health(data)
        if firmware_details:
            ilo_version_str = firmware_details.get('iLO', None)
            return common.get_major_minor(ilo_version_str)

    def _get_number_of_gpu_devices_connected(self, data):
        """Gets the number of GPU devices connected to the server

        Parse the get_host_health_data() and get the count of
        number of GPU devices connected to the server.

        :param data: the output returned by get_host_health_data()
        :returns: a dictionary of rom firmware version.

        """
        temp = self.get_value_as_list((data['GET_EMBEDDED_HEALTH_DATA']
                                      ['TEMPERATURE']), 'TEMP')
        count = 0
        if temp is None:
            return {'pci_gpu_devices': count}

        for key in temp:
            for name, value in key.items():
                if name == 'LABEL' and 'GPU' in value['VALUE']:
                    count = count + 1

        return {'pci_gpu_devices': count}

    def activate_license(self, key):
        """Activates iLO license.

        :param key: iLO license key.
        :raises: IloError, on an error from iLO.
        """
        root = self._create_dynamic_xml('LICENSE', 'RIB_INFO', 'write')
        element = root.find('LOGIN/RIB_INFO/LICENSE')
        etree.SubElement(element, 'ACTIVATE', KEY=key)
        d = self._request_ilo(root)
        self._parse_output(d)

    @firmware_controller.check_firmware_update_component
    def update_firmware(self, filename, component_type):
        """Updates the given firmware on the server for the given component.

        :param filename: location of the raw firmware file. Extraction of the
                         firmware file (if in compact format) is expected to
                         happen prior to this invocation.
        :param component_type: Type of component to be applied to.
        :raises: InvalidInputError, if the validation of the input fails
        :raises: IloError, on an error from iLO
        :raises: IloConnectionError, if not able to reach iLO.
        :raises: IloCommandNotSupportedError, if the command is
                 not supported on the server
        """
        fw_img_processor = firmware_controller.FirmwareImageUploader(filename)

        LOG.debug(self._('Uploading firmware file: %s ...'), filename)
        cookie = fw_img_processor.upload_file_to((self.host, self.port),
                                                 self.timeout)
        # NOTE(mgoddard): Some devices return a cookie with a newline. This
        # breaks header validation in the requests library, which causes the
        # update to fail.
        cookie = cookie.strip()
        LOG.debug(self._('Uploading firmware file: %s ... done'), filename)

        root = self._get_firmware_update_xml_for_file_and_component(
            filename, component_type)
        element = root.find('LOGIN/RIB_INFO')
        etree.SubElement(element, 'TPM_ENABLED', VALUE='Yes')
        extra_headers = {'Cookie': cookie}

        LOG.debug(self._('Flashing firmware file: %s ...'), filename)
        d = self._request_ilo(root, extra_headers=extra_headers)

        # wait till the firmware update completes.
        common.wait_for_ribcl_firmware_update_to_complete(self)
        self._parse_output(d)
        LOG.info(self._('Flashing firmware file: %s ... done'), filename)

    def _get_firmware_update_xml_for_file_and_component(
            self, filename, component):
        """Creates the dynamic xml for flashing the device firmware via iLO.

        This method creates the dynamic xml for flashing the firmware, based
        on the component type so passed.
        :param filename: location of the raw firmware file.
        :param component_type: Type of component to be applied to.
        :returns: the etree.Element for the root of the RIBCL XML
                  for flashing the device (component) firmware.
        """
        if component == 'ilo':
            cmd_name = 'UPDATE_RIB_FIRMWARE'
        else:
            # Note(deray): Not explicitly checking for all other supported
            # devices (components), as those checks have already happened
            # in the invoking methods and may seem redundant here.
            cmd_name = 'UPDATE_FIRMWARE'

        fwlen = os.path.getsize(filename)
        root = self._create_dynamic_xml(cmd_name,
                                        'RIB_INFO',
                                        'write',
                                        subelements={
                                            'IMAGE_LOCATION': filename,
                                            'IMAGE_LENGTH': str(fwlen)
                                        })
        return root

    def _get_memory_details_value_based_on_model(self, data):
        """This method gives memory details based on model.

        :param data: the output returned by get_host_health_data()
        :returns : a list of memory details.
        """
        if 'G7' in self.model:
            return (data['GET_EMBEDDED_HEALTH_DATA']['MEMORY']
                    ['MEMORY_COMPONENTS']['MEMORY_COMPONENT'])
        else:
            return (data['GET_EMBEDDED_HEALTH_DATA']['MEMORY']
                    ['MEMORY_DETAILS_SUMMARY']).values()

    def _update_nic_data_from_nic_info_based_on_model(self, nic_dict, item,
                                                      port, mac):
        """This method updates with port number and corresponding mac

        :param nic_dict: dictionary contains port number and corresponding mac
        :param item: dictionary containing nic details
        :param port: Port number
        :param mac: mac-address
        """
        if 'G7' in self.model:
            nic_dict[port] = mac
        else:
            location = item['LOCATION']['VALUE']
            if location == 'Embedded':
                nic_dict[port] = mac

    def _raise_command_not_supported(self, method):
        platform = self.get_product_name()
        msg = ("`%(method)s` is not supported on %(platform)s" %
               {'method': method, 'platform': platform})
        raise (exception.IloCommandNotSupportedError(msg))

    def inject_nmi(self):
        """Inject NMI, Non Maskable Interrupt.

        Inject NMI (Non Maskable Interrupt) for a node immediately.

        :raises: IloError, on an error from iLO
        :raises: IloCommandNotSupportedError
        """
        self._raise_command_not_supported("inject_nmi")

    def get_host_post_state(self):
        """Request the current state of system POST.

        Retrieves current state of system POST.

        :raises: IloError, on an error from iLO
        :raises: IloCommandNotSupportedError, RIBCL do not support it.
        """
        self._raise_command_not_supported("get_host_post_state")

    def read_raid_configuration(self, raid_config=None):
        """Read the logical drives from the system

        Read raid configuration of the hardware.

        :param raid_config: None in case of post-delete read or in case of
                            post-create a dictionary containing target raid
                            configuration data. This data stucture should be as
                            follows:
                            raid_config = {'logical_disks': [{'raid_level': 1,
                            'size_gb': 100, 'physical_disks': ['6I:1:5'],
                            'controller': 'HPE Smart Array P408i-a SR Gen10'},
                            <info-for-logical-disk-2>]}
        :raises: IloCommandNotSupportedError, if the command is not supported
                 on the server.
        """
        self._raise_command_not_supported("read_raid_configuration")

    def delete_raid_configuration(self):
        """Delete the raid configuration on the hardware.

        Loops through each SmartStorageConfig controller and clears the
        raid configuration.

        :raises: IloCommandNotSupportedError
        """
        self._raise_command_not_supported("delete_raid_configuration")

    def create_raid_configuration(self, raid_config):
        """Create the raid configuration on the hardware.

        Based on user raid_config input, it will create raid

        :param raid_config: A dictionary containing target raid configuration
                            data. This data stucture should be as follows:
                            raid_config = {'logical_disks': [{'raid_level': 1,
                            'size_gb': 100, 'physical_disks': ['6I:1:5'],
                            'controller': 'HPE Smart Array P408i-a SR Gen10'},
                            <info-for-logical-disk-2>]}
        :raises: IloCommandNotSupportedError
        """
        self._raise_command_not_supported("create_raid_configuration")

    def get_bios_settings_result(self):
        """Gets the result of the bios settings applied

        :raises: IloError, on an error from iLO.
        :raises: IloCommandNotSupportedError, if the command is
                 not supported on the server.
        """
        self._raise_command_not_supported("get_bios_settings_result")


# The below block of code is there only for backward-compatibility
# reasons (before commit 47608b6 for ris-support).
IloClient = RIBCLOperations
IloError = exception.IloError
IloClientInternalError = exception.IloClientInternalError
IloCommandNotSupportedError = exception.IloCommandNotSupportedError
IloLoginFailError = exception.IloLoginFailError
IloConnectionError = exception.IloConnectionError
IloInvalidInputError = exception.IloInvalidInputError
