Network commands¶
Caution
The Fuel command-line interface has been updated. Although old
fuel commands are still available, we recommend that you use
the new fuel2 commands instead. See
the Fuel CLI commands comparison matrix.
You can manage network configurations using the following command:
fuel --env <ENV_ID> network <action> --dir <PATH>
| Value | Description |
<ENV_ID> |
ID of an OpenStack environment |
<PATH> |
Path to directory |
<action> |
Action that will be performed for the network configuration. |
The following table describes network management commands available in the Fuel CLI.
| Command | Description | Example |
|---|---|---|
fuel --env <ENV_ID> network --download --dir <PATH> |
Download network configuration for a specific environment. | Download network configuration for
the environment with ID fuel --env 1 network --download
|
fuel --env <ENV_ID> network --upload --dir <PATH> |
Upload network configuration for a specific environment. | Upload network configuration for the environment with
ID fuel --env 1 network --upload
Note The fuel network command can update configuration of all networks in an OpenStack environment, as well as corresponding Neutron parameters. However, you must update the related VIPs and network templates separately using the corresponding Fuel CLI commands. |
fuel --env <ENV_ID> network --verify --dir <PATH> |
Verify network configuration. Verification does not work for multiple cluster networks, when an environment has more than one node group. | Verify network configuration of the OpenStack environment with ID fuel --env 1 network --verify
|
To view interaction with the Nailgun API, run the corresponding command with
the --debug option.
Example:
fuel --env <ENV_ID> network --download --dir <PATH> --debug
Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.