Huawei storage driver

Juno - Juno - Juno - Juno - Juno - Juno - Juno - Juno -

The Huawei driver supports the iSCSI and Fibre Channel connections and enables OceanStor T series unified storage and OceanStor 18000 high-end storage to provide block storage services for OpenStack.

Supported operations

OceanStor T series unified storage supports these operations:

Create, delete, attach, and detach volumes.
Create, list, and delete volume snapshots.
Create a volume from a snapshot.
Copy an image to a volume.
Copy a volume to an image.
Clone a volume.

OceanStor 18000 supports these operations:

Create, delete, attach, and detach volumes.
Create, list, and delete volume snapshots.
Copy an image to a volume.
Copy a volume to an image.
Create a volume from a snapshot.
Clone a volume.

Configure Block Storage nodes

In /etc/cinder, create the driver configuration file named cinder_huawei_conf.xml.

You must configure Product and Protocol to specify a storage system and link type. The following uses the iSCSI driver as an example. The driver configuration file of OceanStor T series unified storage is shown as follows:

<?xml version='1.0' encoding='UTF-8'?>
<config>
    <Storage>
        <Product>T</Product>
        <Protocol>iSCSI</Protocol>
        <ControllerIP0>x.x.x.x</ControllerIP0>
        <ControllerIP1>x.x.x.x</ControllerIP1>
        <UserName>xxxxxxxx</UserName>
        <UserPassword>xxxxxxxx</UserPassword>
    </Storage>
    <LUN>
        <LUNType>Thick</LUNType>
        <StripUnitSize>64</StripUnitSize>
        <WriteType>1</WriteType>
        <MirrorSwitch>1</MirrorSwitch>
        <Prefetch Type="3" value="0"/>
        <StoragePool Name="xxxxxxxx"/>
        <StoragePool Name="xxxxxxxx"/>
    </LUN>
    <iSCSI>
        <DefaultTargetIP>x.x.x.x</DefaultTargetIP>
        <Initiator Name="xxxxxxxx" TargetIP="x.x.x.x"/>
        <Initiator Name="xxxxxxxx" TargetIP="x.x.x.x"/>
    </iSCSI>
    <Host OSType="Linux" HostIP="x.x.x.x, x.x.x.x"/>
</config>

The driver configuration file of OceanStor 18000 is shown as follows:

<?xml version='1.0' encoding='UTF-8'?>
<config>
    <Storage>
        <Product>18000</Product>
        <Protocol>iSCSI</Protocol>
        <RestURL>https://x.x.x.x:8088/deviceManager/rest/</RestURL>
        <UserName>xxxxxxxx</UserName>
        <UserPassword>xxxxxxxx</UserPassword>
    </Storage>
    <LUN>
        <LUNType>Thick</LUNType>
        <WriteType>1</WriteType>
        <MirrorSwitch>1</MirrorSwitch>
        <StoragePool>xxxxxxxx</StoragePool>
    </LUN>
    <iSCSI>
        <DefaultTargetIP>x.x.x.x</DefaultTargetIP>
        <Initiator Name="xxxxxxxx" TargetIP="x.x.x.x"/>
        <Initiator Name="xxxxxxxx" TargetIP="x.x.x.x"/>
    </iSCSI>
    <Host OSType="Linux" HostIP="x.x.x.x, x.x.x.x"/>
</config>

	Note for Fibre Channel driver configuration
	You do not need to configure the iSCSI target IP address for the Fibre Channel driver. In the prior example, delete the iSCSI configuration:

    <iSCSI>
        <DefaultTargetIP>x.x.x.x</DefaultTargetIP>
        <Initiator Name="xxxxxxxx" TargetIP="x.x.x.x"/>
        <Initiator Name="xxxxxxxx" TargetIP="x.x.x.x"/>
    </iSCSI>

To add volume_driver and cinder_huawei_conf_file items, you can modify the cinder.conf configuration file as follows:

volume_driver = cinder.volume.drivers.huawei.HuaweiVolumeDriver
cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf.xml

You can configure multiple Huawei back-end storages as follows:

enabled_backends = t_iscsi, 18000_iscsi
[t_iscsi]
volume_driver = cinder.volume.drivers.huawei.HuaweiVolumeDriver
cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf_t_iscsi.xml
volume_backend_name = HuaweiTISCSIDriver
[18000_iscsi]
volume_driver = cinder.volume.drivers.huawei.HuaweiVolumeDriver
cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf_18000_iscsi.xml
volume_backend_name = Huawei18000ISCSIDriver

Configuration file details

This table describes the Huawei storage driver configuration options:

Table 1.10. Huawei storage driver configuration options
Flag name	Type	Default	Description
`Product`	Required		Type of a storage product. Valid values are `T`or `18000`.
`Protocol`	Required		Type of a protocol. Valid values are `iSCSI` or `FC`.
`ControllerIP0`	Required		IP address of the primary controller (not required for the 18000)
`ControllerIP1`	Required		IP address of the secondary controller (not required for the 18000)
`RestURL`	Required		Access address of the Rest port (required only for the 18000)
`UserName`	Required		User name of an administrator
`UserPassword`	Required		Password of an administrator
`LUNType`	Optional	Thin	Type of a created LUN. Valid values are `Thick` or `Thin`.
`StripUnitSize`	Optional	64	Stripe depth of a created LUN. The value is expressed in KB. This flag is not valid for a thin LUN.
`WriteType`	Optional	1	Cache write method. The method can be write back, write through, or Required write back. The default value is `1`, indicating write back.
`MirrorSwitch`	Optional	1	Cache mirroring policy. The default value is `1`, indicating that a mirroring policy is used.
`Prefetch Type`	Optional	3	Cache prefetch strategy. The strategy can be constant prefetch, variable prefetch, or intelligent prefetch. Default value is `3`, which indicates intelligent prefetch and is not required for the 18000.
`Prefetch Value`	Optional	0	Cache prefetch value.
`StoragePool`	Required		Name of a storage pool that you want to use.
`DefaultTargetIP`	Optional		Default IP address of the iSCSI port provided for compute nodes.
`Initiator Name`	Optional		Name of a compute node initiator.
`Initiator TargetIP`	Optional		IP address of the iSCSI port provided for compute nodes.
`OSType`	Optional	Linux	The OS type for a compute node.
`HostIP`	Optional		The IPs for compute nodes.

Note for the configuration

	Note for the configuration
You can configure one iSCSI target port for each or all compute nodes. The driver checks whether a target port IP address is configured for the current compute node. If not, select `DefaultTargetIP`. You can configure multiple storage pools in one configuration file, which supports the use of multiple storage pools in a storage system. (The 18000 driver allows configuration of only one storage pool.) For details about LUN configuration information, see the createlun command in the command-line interface (CLI) documentation or run the help -c createlun on the storage system CLI. After the driver is loaded, the storage system obtains any modification of the driver configuration file in real time and you do not need to restart the `cinder-volume` service. The driver does not support the iSCSI multipath scenarios.

You can configure one iSCSI target port for each or all compute nodes. The driver checks whether a target port IP address is configured for the current compute node. If not, select DefaultTargetIP.
You can configure multiple storage pools in one configuration file, which supports the use of multiple storage pools in a storage system. (The 18000 driver allows configuration of only one storage pool.)
For details about LUN configuration information, see the createlun command in the command-line interface (CLI) documentation or run the help -c createlun on the storage system CLI.
After the driver is loaded, the storage system obtains any modification of the driver configuration file in real time and you do not need to restart the cinder-volume service.
The driver does not support the iSCSI multipath scenarios.

Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

Legal notices