Brocade Fibre Channel Zone Driver

Kilo - Kilo - Kilo - Kilo - Kilo - Kilo - Kilo - Kilo -

System requirements

Brocade Fibre Channel Zone Driver performs zoning operations through SSH. Configure Brocade Zone Driver and lookup service by specifying the following parameters:

Table 2.44. Description of zoning manager configuration options
Configuration option = Default value	Description
[fc-zone-manager]
`brcd_sb_connector` = `cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI`	(StrOpt) Southbound connector for zoning operation

Configure SAN fabric parameters in the form of fabric groups as described in the example below:

Table 2.45. Description of zoning fabrics configuration options
Configuration option = Default value	Description
[BRCD_FABRIC_EXAMPLE]
`fc_fabric_address` =	(StrOpt) Management IP of fabric
`fc_fabric_password` =	(StrOpt) Password for user
`fc_fabric_port` = `22`	(IntOpt) Connecting port
`fc_fabric_user` =	(StrOpt) Fabric user ID
`principal_switch_wwn` = `None`	(StrOpt) Principal switch WWN of the fabric
`zone_activate` = `True`	(BoolOpt) overridden zoning activation state
`zone_name_prefix` = `None`	(StrOpt) overridden zone name prefix
`zoning_policy` = `initiator-target`	(StrOpt) overridden zoning policy

	Note
	Define a fabric group for each fabric using the fabric names used in `fc_fabric_names` configuration option as group name.

Questions? Discuss on ask.openstack.org
Found an error? Report a bug against this page

Legal notices